Transmission of Genetic Material and Malignant Cells of Cutaneous Origin via Surgical Sutures.

BACKGROUND: Seeding of skin cancer cells following diagnostic or therapeutic surgical procedures can occur and might cause local recurrences. As current preferred therapy for skin malignancy is surgical excision, seeding of tumour cells by manipulating malignant tissue or suturing can be another factor leading to recurrences. OBJECTIVE: To evaluate whether genetic material and malignant cells adhere to standard suture materials. METHODS: This prospective study included patients who underwent excision of skin lesions. Monofilament and braided sutures were examined. Sutures were passed through the observed tumour or healthy skin margins and were examined for DNA material and cells by cytological analysis, cell culture and characterization, and DNA analysis. RESULTS: Twenty-two patients and 148 sutures were included. DNA quantification showed DNA material on all sutures, with no significant difference between braided and monofilament sutures. Cytological analysis showed that all slides prepared from cell blocks contained normal squamous and atypical cells. Cell culture and characterization showed viable cells adhering to the sutures under direct light microscopy. Cell cultures showed rapid proliferation of epithelial cells from squamous cell carcinoma specimens. CONCLUSION: Suture materials carry DNA material and cells, including malignant cells of cutaneous origin and may seed them at distant sites.

Strategies and challenges to enhance commercial viability of algal biorefineries for biofuel production.

The rise in energy consumption would quadruple in the coming century and the, existing energy resources might be insufficient to meet the demand of the growing population. An alternative and sustainable energy resource is therefore needed to address the fossil fuel deficiency. The utility of microalgae strains in the aspect of biorefinery has been in research for quite some time. Algal biorefinery is an alternate way of renewable energy however even after decades of research it still suffers from commercialization bottlenecks. The current manuscript reviews the scenarios where the innovation needs an ignition for its commercialization. This review discusses the prospects of up-scale cultivation, and harvesting algal biomass for biorefineries. It narrates algal biorefinery hurdles that can be solved using integrated technology approach, life cycle assessment and applications of nanotechnology. The review also sheds light upon the ties of algal biorefineries with its economic viability.

Microalgae and bio-polymeric adsorbents: an integrative approach giving new directions to wastewater treatment.

This review analyses the account of biological (microalgae) and synthetic (bio-polymeric adsorbents) elements to compass the treatment efficiencies of various water pollutants and mechanisms behind them. While considering pollutant removal, both techniques have their own merits and demerits. Microalgal-based methods have been dominantly used as a biological method for pollutant removal. The main limitations of microalgal methods are capacity, scale, dependence on variables of environment and duration of the process. Biopolymers on the other hand are naturally produced, abundant in nature, environmentally safe and biocompatible with cells and many times biodegradable. Algal immobilization in biopolymers has promoted the reuse of cells for further treatment and protected cells from toxic environment monitoring and controlling the external factors like pH, temperature and salinity can promote the removal process while working with the mentioned technologies. In this review, a mechanistic view of both these techniques along with integrated approaches emphasizing on their loopholes and possibilities of improvement in these techniques is represented. In addition to these, the review also discusses the post-treatment effect on algal cells which are specifically dependent on pollutant type and their concentration. All these insights will aid in developing integrated solutions to improve removal efficiencies in an environmentally safe and cost-effective manner.Novelty statement The main objective of this review is to thoroughly understand the role of micro-algal cells and synthetic adsorbents individually as well as their integrative effect in the removal of pollutants from wastewater. Many reviews have been published containing information related to either removal mechanism by algae or synthetic adsorbents. While in this review we have discussed the agents, algae and synthetic adsorbents along with their limitations and explained how these limitations can be overcome with the integration of both the moieties together in process of immobilization. We have covered both the analytical and mechanistic parts of these technologies. Along with this, the post-treatment effects on algae have been discussed which can give us a critical understanding of algal response to pollutants and by-products obtained after treatment. This review contains three different sections, their importance and also explained how these technologies can be improved in the future aspects.

Synthesis, characterization and application of intracellular Ag/AgCl nanohybrids biosynthesized in Scenedesmus sp. as neutral lipid inducer and antibacterial agent.

The current research focuses on the Intracellular biosynthesis of Ag/AgCl nanohybrids in microalgae, Scenedesmus sp. The effect of biosynthesis process on growth and lipid profile of cells is key element of this study. Ag/AgCl nanohybrids synthesized intracellularly were characterized by UV-Vis spectrophotometer, Powder X-Ray Diffraction (P-XRD), Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HRTEM). 10-20 nm and 10-50 nm sized spherical shaped nanoparticles of polycrystalline nature were grown using 0.5 and 1 mM of AgNO3 precursor, respectively and Scenedesmus sp. as reducing agent. Total lipid content of the cells treated with 0.5 mM and 1 mM AgNO3 was static and found to be 43.2 ± 0.01 µg/mL and 48.2 ± 0.02 µg/mL respectively at 120 h of Ag/AgCl nanoparticles biosynthesis. FAME (Fatty Acid Methyl Ester) profile was improved due to intracellular nanoparticles biosynthesis with maximum C16:0 (palmitic acid) (35.7%) in cells treated with 0.5 mM AgNO3 used for Ag/AgCl nanohybrids synthesis. Palmitic acid in cells exposed to 0.5 mM concentration of metallic precursor increased by 75.86%. Synthesized nanoparticles were tested on four bacterial strains to establish its antibacterial efficiency showing appropriate zone of inhibition at varying concentrations. Present study efficiently demonstrates the utility of microalgae integrating nanoparticles biosynthesis and lipid accumulation.

Milking microalgae in conjugation with nano-biorefinery approach utilizing wastewater.

In today's era, we need to replace chemical or physical processes of nanoparticle synthesis with biosynthesis processes to avoid environmental damage. These bioderived nanoparticles can help in addressing the problems of wastewater treatment and biofuels production. This review gives an insight into solving multiple problems using a nano-biorefinery approach in conjugation with wastewater treatment. The major advantage of using a bio-derivative method in nanoparticle synthesis is its low toxicity towards the environment. The current review discusses the development of nanoscience and its biogenic importance. It covers the usage of microalgae for (A) Nanoparticle's biosynthesis (B) Mechanism of nanoparticle biosynthesis (C) Nanoparticles in bio-refinery processes (D) Wastewater treatment with microalgae and bio-derived nanoparticles (E) A hypothetical mechanistic approach, which utilizes the photothermal effect of metallic nanoparticles to extract lipids from the cells without cell damage. The term "cell milking" has been around for quite some time, and the hypothesis discussed in the present study can help in this context. The current hypothesized process can pave ways for futuristic endeavors to conjugate nanoparticles and microalgae for viable and commercial production of biofuel, nanoparticles, and many other molecules.

The use of response surface methodology for improving fatty acid methyl ester profile of Scenedesmus vacuolatus.

The present study has been designed to optimise certain important process parameters for Scenedesmus vacuolatus to achieve efficient carbon dioxide extenuation as well as suitable fatty acid profile in context to improve biodiesel properties. The effect of varying sodium bicarbonate concentration was evaluated in single and multicomponent system such as nitrate, phosphate, inoculum size to observe interactive effects on algae biomass production, carbon dioxide (CO2) removal efficiency and fatty acid methyl ester (FAME) profile. Maximum biomass productivity of 117.0 ± 7.7 mg/L/day with 3 g/L of sodium bicarbonate was obtained i.e. approximately 2 folds higher than the control. Under multicomponent exposure, maximum biomass of 1701.5 ± 88.8 mg/L and maximum chlorophyll concentration of 15.3 ± 6.4 mg/L were achieved on 14th day at 3 g/L sodium nitrate, 0.1 g/L dipotassium hydrogen phosphate, 2 g/L of sodium bicarbonate and initial cell density of 0.3 (N3P0.1B2OD0.3). FAME content of 46.1 mg/g of biomass was obtained at this combination which is approximately 3 folds higher than the FAME content obtained under nitrogen and phosphate deprivation (16.6 mg/g at N0P0B2OD0.3). Confocal microscopy images confirmed the results with enhanced lipid droplet accumulation at high bicarbonate concentration as compared with the control. This interactive study concluded the variability in FAME profile along with the exposure to varying nutrient concentrations.

Screening of microalgae for biosynthesis and optimization of Ag/AgCl nano hybrids having antibacterial effect.

Here we report a facile and novel bio-synthesis technique, using algal extract to reduce silver metal ions into Ag/AgCl nanoparticles. Different concentrations of metallic precursors of silver nitrate (0.1 mM, 0.2 mM, 0.5 mM and 1 mM) were tested with alcoholic extract prepared from biomass of Chlorella sp. for nanoparticle biosynthesis which was screened out of four species namely Chlorella sp., Lyngbya putealis, Oocystis sp. and Scenedesmus vacuolatus. The biomolecules present in the alcoholic extract assisted in the synthesis of nanoparticles by reducing the metallic salt to metal ions and acting as capping agents in order to stabilize the particles. The synthesized particles were characterized for physico-chemical properties. DLS analysis of particles prepared from Chlorella sp. shows the particles with size of 90.6 nm. These biosynthesized nanoparticles show great potential applications in antibacterial activity.

Fast Fourier infrared spectroscopy to characterize the biochemical composition in diatoms.

Diatoms are photosynthetic unicellular microalgae and are nature's hidden source of several biosynthetic metabolites with their use in biofuel, food and drug industries. They mainly contain various lipids, sterols, isoprenoids and toxins with their use in apoptotic, fertility controlling and cancer drugs. Chemical studies on diatoms are limited due to various limitations such as variation of nutrients, contaminants and change in seasonal factors in the environment. To overcome these limitations, we obtained axenic cultures of 12 fresh-water diatom strains on the 22nd day of inoculation having a dry weight of 1 mg each and performed their Fourier transform infrared (FTIR) study for the detection of functional groups responsible for their chemical moiety. The spectral mapping showed a varied level of polyunsaturated fatty acids, amides, amines, ketone bodies and esters for their applications in various pharmacological, food and biofuel industries in the exponential phase of their growth in f/2 media. The FTIR study of the 12 diatom strains showed various similarities in the form of some common peak patterns ranging from 3000 to 3600 cm-1 for vO-H absorption. The symmetric stretching vibration frequency of Diadesmis confervaceae (V2) type species showed different behaviour than others in the spectral region starting from 1600 to 1700 cm-1. The absorption between 1500 and 1575 cm-1 reflects the presence of the -N-H group. Infrared (IR) absorptions falling between 1600 and 1700 cm-1 reflect the presence of amide's vC=O in all species. Placoneis elginensis (V8) type species showed an additional absorption band which is centred around 1735-1750 cm-1 which perhaps reflects the presence of ester's vC=O. Diadesmis confervaceae (V2), Nitzschia palea (V4), Placoneis elginensis (V8), Nitzschia palea var. debilis (V6), Nitzschia inconspicua (V10), Gomphonema parvulum (V11) and Sellaphora (V12) showed distinct structural features with important key functionalities that can make them essential drug markers in the pharmaceutical industry.