RESUMO
Photocatalytic water splitting is a promising approach to generating sustainable hydrogen. However, the transport of photoelectrons to the catalyst sites, usually within ps-to-ns timescales, is much faster than proton delivery (â¼µs), which limits the activity. Therefore, the acceleration of abstraction of protons from water molecules towards the catalytic sites to keep up with the electron transfer rate can significantly promote hydrogen production. The photobasic effect that is the increase in proton affinity upon excitation offers means to achieve this objective. Herein, we design photobasic carbon dots and identify that internal pyridinic N sites are intrinsically photobasic. This is supported by steady-state and ultrafast spectroscopic measurements that demonstrate proton abstraction within a few picoseconds of excitation. Furthermore, we show that in water, they form a unique four-level lasing scheme with optical gain and stimulated emission. The latter competes with photocatalysis, revealing a rather unique mechanism for efficiency loss, such that the stimulated emission can act as a toggle for photocatalytic activity. This provides additional means of controlling the photocatalytic process and helps the rational design of photocatalytic materials.
RESUMO
One of the major goals of vascular tissue engineering is to develop much-needed materials that are suitable for use in small-diameter vascular grafts. Poly(1,8-octamethylene citrate) can be considered for manufacturing small blood vessel substitutes, as recent studies have demonstrated that this material is cytocompatible with adipose tissue-derived stem cells (ASCs) and favors their adhesion and viability. The work presented here is focused on modifying this polymer with glutathione (GSH) in order to provide it with antioxidant properties, which are believed to reduce oxidative stress in blood vessels. Cross-linked poly(1,8-octamethylene citrate) (cPOC) was therefore prepared by polycondensation of citric acid and 1,8-octanediol at a 2:3 molar ratio of the reagents, followed by in-bulk modification with 0.4, 0.8, 4 or 8 wt.% of GSH and curing at 80 °C for 10 days. The chemical structure of the obtained samples was examined by FTIR-ATR spectroscopy, which confirmed the presence of GSH in the modified cPOC. The addition of GSH increased the water drop contact angle of the material surface and lowered the surface free energy values. The cytocompatibility of the modified cPOC was evaluated in direct contact with vascular smooth-muscle cells (VSMCs) and ASCs. The cell number, the cell spreading area and the cell aspect ratio were measured. The antioxidant potential of GSH-modified cPOC was measured by a free radical scavenging assay. The results of our investigation indicate the potential of cPOC modified with 0.4 and 0.8 wt.% of GSH to produce small-diameter blood vessels, as the material was found to: (i) have antioxidant properties, (ii) support VSMC and ASC viability and growth and (iii) provide an environment suitable for the initiation of cell differentiation.
RESUMO
Carbon dots (CDs), an emerging class of nanomaterials, have attracted considerable attention due to their intriguing photophysical properties. Despite their indisputable potential of utilization in many fascinating areas of research and life, some fundamental aspects concerning their structure and the origin of their photoluminescence (PL) properties still await clarification. The mechanism of PL emission of CDs is associated with their structure, which is dependent on the carbonization process. At the initial stages of CD synthesis via a bottom-up approach, molecular fluorophores are considered to dominate the optical characteristics of the resulting nanomaterials. In this review, the recent progress in the use of molecular state theory for explanation of the structure-property relationship in CDs is summarized. This review focuses exclusively on the molecular fluorophores existing in nanomaterials prepared from citric acid (CA) as one of the most frequent carbon sources reported for the bottom-up synthesis of CDs. Consequently, the most relevant transformations of CA and the history of molecular fluorophores derived from it are described, followed by an in-depth discussion on their relevance in understanding the specific photophysical properties of blue-, green-, and red-emitting CDs. Finally, the challenging issues and future perspectives of molecular state PL mechanism exploration in CDs are highlighted.
RESUMO
Innovative engineering design for biologically active hydroxyapatites requires enhancing both mechanical and physical properties, along with biocompatibility, by doping with appropriate chemical elements. Herein, the purpose of this investigation was to evaluate and elucidate the model of naturally occurring hydroxyapatite and the effects of doped trace elements on the function of normal human fibroblasts, representing the main cells of connective tissues. The substrates applied (geological apatites with hexagonal prismatic crystal habit originated from Slyudyanka, Lake Baikal, Russia (GAp) and from Imilchil, The Atlas Mountains, Morocco (YAp)) were prepared from mineral natural apatite with a chemical composition consistent with the building blocks of enamel and enriched with a significant F- content. Materials in the form of powders, extracts and single-crystal plates have been investigated. Moreover, the effects on the function of fibroblasts cultured on the analyzed surfaces in the form of changes in metabolic activity, proliferation and cell morphology were evaluated. Apatite plates were also evaluated for cytotoxicity and immune cell activation capacity. The results suggest that a moderate amount of F- has a positive effect on cell proliferation, whereas an inhibitory effect was attributed to the Cl- concentration. It was found that for (100) GAp plate, fibroblast proliferation was significantly increased, whereas for (001) YAp plate, it was significantly reduced, with no cytotoxic effect and no immune response from macrophages exposed to these materials. The study of the interaction of fibroblasts with apatite crystal surfaces provides a characterization relevant to medical applications and may contribute to the design of biomaterials suitable for medical applications and the evaluation of their bioavailability.
Assuntos
Apatitas/química , Durapatita/química , Fibroblastos , Minerais/química , Oligoelementos/química , Materiais Biocompatíveis/química , Proliferação de Células , Sobrevivência Celular , Fenômenos Químicos , Fibroblastos/citologia , Fibroblastos/metabolismo , Humanos , Análise EspectralRESUMO
Herein, a renewed prominence towards the synthesis of poly(alkylene citrate) (PAC) biomaterials and their detailed chemical, structural and mechanical characterization has been reported. Based on the modifications to the PAC synthesis protocol introduced in this study, the fabrication process was significantly streamlined, the reaction yields were increased, and the homogeneity of the final materials was found to be substantially improved. Comprehensive nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS) studies of the fabricated prepolymers shed light on the mechanism of the PAC cross-linking process and supported the design of materials with enhanced biocompatibility. Therefore, the initial molar ratio of the reagents involved in the synthesis of PAC materials was found to be pivotal to both the biological and mechanical properties of the final products. Moreover, cell viability and proliferation assays revealed enhanced biocompatibility of the materials formulated with a molar ratio of diol over citric acid (3 : 2 mol/mol) in comparison to the most commonly described 1 : 1 analogue without affecting the possibility of further functionalization. Furthermore, this work creates a new paradigm for prospective studies on the properties of modified PAC materials and their application in medicine and tissue engineering.
Assuntos
Materiais Biocompatíveis/química , Ácido Cítrico/química , Elastômeros/química , Estrutura Molecular , Relação Estrutura-AtividadeRESUMO
The electronic nature of 4-hydroxy-1H-pyrrolo[3,4-c]pyridine-1,3,6(2H,5H)-trione (HPPT) was comprehensively investigated in liquid media at room temperature using steady-state and time-resolved femtosecond transient absorption spectroscopic techniques. The analysis of the linear photophysical and photochemical parameters of HPPT, including steady-state absorption, fluorescence and excitation anisotropy spectra, along with the lifetimes of fluorescence emission and photodecomposition quantum yields, revealed the nature of its large Stokes shift, specific changes in the permanent dipole moments under electronic excitation, weak dipole transitions with partially anisotropic character, and high photostability. Transient absorption spectra of HPPT were obtained with femtosecond resolution and no characteristic solvate relaxation processes in protic (methanol) solvent were revealed. Efficient light amplification (gain) was observed in the fluorescence spectral range of HPPT, but no super-luminescence and lasing phenomena were detected. The electronic structure of HPPT was also analyzed with quantum-chemical calculations using a DFT/B3LYP method and good agreement with experimental data was shown. The development and investigation of new pyrrolo[3,4-c]pyridine derivatives are important due to their promising fluorescent properties and potential for use in physiological applications.
Assuntos
Elétrons , Corantes Fluorescentes/química , Piridinas/química , Pirróis/química , Análise Espectral , Química Computacional , Fluorescência , Corantes Fluorescentes/síntese química , Estrutura Molecular , Teoria Quântica , Solventes/químicaRESUMO
Herein, a novel fluorescent method for the determination of GSH levels in aqueous solutions involving the utilization of citric acid as a derivatization reagent was developed. Therefore, the crucial parameters of the derivatization process were established from what has resulted in the development of a sensitive, reproducible, and accurate GSH assay. The method was validated, and its applicability in the characterization of the GSH concentration in dietary supplements concerning the selectivity in the determination of GSH over GSSG was both confirmed. The chemical structure of the new fluorophore 3-[(carboxymethyl)carbamoyl]-5-oxo-2,3-dihydro-5H-[1,3]thiazolo[3,2-a]pyridine-7-carboxylic acid - CTPC was elucidated using detailed NMR: one-dimensional (1H, 13C), as well as two-dimensional NMR spectra (1H-1H COSY, 1H-13C HSQC, 1H-13C HMBC, 1H-15N HSQC, 1H-15N HMBC) experiments. Besides, the essential optical, biological and antioxidative properties of CTPC were investigated.
Assuntos
Glutationa , Piridonas , Suplementos Nutricionais , Espectroscopia de Ressonância MagnéticaRESUMO
Superalloys provide high corrosion resistance and are widely used as high-performance materials in aerospace, automotive, chemical, and other industries. Herein, the investigation into the characteristics and properties of alloy waste; Inconel 625, Inconel 718, and Titanium Grade 5, from the automotive industry, was introduced as a result of a recovery in various processes. For this reason, the following procedures were carried as follows; the washing process to remove oil from the swarf was evaluated using several commercial agents and for the process of thermal disposal of processing fluids, a temperature of 900 °C was used in a muffle furnace without air access. The presented studies show that the commercially available series of washing agents did not modify the composition of the surface. However, the high temperatures during the calcination of oil residues are affecting the elemental composition of the alloys. According to the results of the analyses, it is not possible to remove 100% of the oil residues from alloy waste using washing agents based on light organic fractions; however, the effectiveness of this method reaches 99%. In this report, accurate SEM-EDS analyses show changes that occur on the surface after machining and removal of processing fluids. The NMR and GC/MS investigations indicate contaminants as a mixture of aliphatic and cycloaliphatic hydrocarbons with carbon numbers from C8-C30.
RESUMO
Herein, a novel fluorescent method for the determination of d-panthenol (DP) level in solutions with no separate hydrolysis step has been revealed based on the utilization of citric acid (CA) as a derivatizing agent. Consequently, the essential parameters of the derivatization process were established, resulting in the development of sensitive, repeatable, and accurate determination of panthenol. The method was approved, and its usefulness in characterizing the concentration of DP in pharmaceutical formulations and selectivity in the determination of DP were validated. The chemical structure of the new fluorophore formulating in the reaction in DP with CA, i.e., 6-oxo-3,4-dihydro-2H,6H-pyrido[2,1-b][1,3]oxazine-8-carboxylic acid (ODPC), was elucidated using detailed NMR experiments: one-dimensional (1H, 13C) as well as two-dimensional NMR spectra (1H-1H COSY, 1H-13C HSQC, 1H-13C HMBC, 1H-15N HSQC, 1H-15N HMBC).
Assuntos
Ácido Pantotênico/análogos & derivados , Piridonas/química , Química Farmacêutica/métodos , Ácido Cítrico/química , Fluorescência , Hidrólise , Ácido Pantotênico/químicaRESUMO
Herein, we describe the synthesis of poly(1,8-octamethylene citrate) materials modified in the bulk with 2-hydroxypropyl-ß-cyclodextrin (cPOCCD), biodegradable elastomers with intrinsic sorption properties for drug delivery. The chemical structure, physicochemical properties, in vitro drug loading and release profiles of cPOCCD were investigated. Thus, cPOCCD polyesters absorb the studied drugs more effective and release them for a longer period of time than poly(1,8-octamethylene citrate) materials not containing cyclodextrins.
Assuntos
Ciclodextrinas/química , Sistemas de Liberação de Medicamentos , Elastômeros/química , beta-Ciclodextrinas/química , 2-Hidroxipropil-beta-Ciclodextrina/química , Citratos/química , Ciclodextrinas/síntese química , Elastômeros/síntese química , Humanos , Tamanho da Partícula , Poliésteres/química , Polímeros/químicaRESUMO
In this report, we present the results of our investigations into the elucidation of the chemical structure of moieties responsible for the blue and green luminescence of CDs derived from the microwave-assisted pyrolysis of citric acid in the presence of urea. The molecular fluorophore that forms during the synthesis of green fluorescing CDs is 4-hydroxy-1H-pyrrolo[3,4-c]pyridine-1,3,6(2H,5H)-trione (HPPT).
RESUMO
The possible origin of luminescent properties of biodegradable photoluminescent polyesters (BPLPs) has been revealed by isolation and identification of luminescent agent from the hydrolyzate of BPLP. Elemental analysis, ESI-MS, (1)H, (13)C, 2D HSQC and COSY NMR spectra confirmed the chemical structure as 5-oxo-2,3-dihydro-5H-[1,3]thiazolo[3,2-a]pyridine-3,7-dicarboxylic acid (TPA).