Relevant Developments in the Use of Three-Component Reactions for the Total Synthesis of Natural Products. The last 15 Years.

Multicomponent reactions (MCRs) offer a highly useful and valuable strategy that can fulfill an important role in synthesizing complex polysubstituted compounds, by simplifying otherwise long sequences and increasing their efficiency. The total synthesis of selected natural products employing three-component reactions as their common strategic MCR approach, is reviewed on a case-by-case basis with selected targets conquered during the last 15 years. The revision includes detailed descriptions of the selected successful sequences; relevant information on the isolation, and bioactivity of the different natural targets is also briefly provided.

Preparation and characterization of new salts of tioconazole. Comparison of their dissolution performance.

Tioconazole is an effective antifungal agent with very low solubility in aqueous media, which limits its bioavailability and efficacy. Aiming to overcome the drug limitations by improving the solubility of this active pharmaceutical ingredient, solution precipitation techniques were employed to prepare four new crystalline salts, namely the mesylate, tosylate, maleate (1:1), and fumarate (1:1) hemihydrate. The thermal stabilities, dissolution properties, and structural characteristics of the solids were determined, and the study was extended to compare their properties with the already-known oxalate salt. The structural characterization of the new phases was carried out using a multi-method approach, which included thermal (differential scanning calorimetry and thermogravimetry), diffractometric (powder X-ray diffraction), and spectroscopic (near-infrared and mid-infrared) methodologies. The determination of the melting point of the salts confirmed the findings made by thermal methods. Functional characteristics of the salts, involving their intrinsic dissolution rates were also determined. It was found that the salts exhibited improved thermal stability and that the nature of the counterion modulated their dissolution characteristics. The salts displayed better intrinsic dissolution rates than the free base, to the point of being "highly soluble" according to the Biopharmaceutical Classification System. At pH 4.3, the sulfonic acid derivatives exhibited better dissolution rates than their carboxylic acid-derived counterparts, greatly improved regarding bare tioconazole. The results suggest that the salts have great potential to be used as replacements for the free base; in principle, careful salt selection may help to fulfill each solubility need for the different scenarios where the drug may be used.

Recent developments in the total synthesis of natural products using the Ugi multicomponent reactions as the key strategy.

The total syntheses of selected natural products using different versions of the Ugi multicomponent reaction is reviewed on a case-by-case basis. The revision covers the period 2008-2023 and includes detailed descriptions of the synthetic sequences, the use of state-of-the-art chemical reagents and strategies, as well as the advantages and limitations of the transformation and some remedial solutions. Relevant data on the isolation and bioactivity of the different natural targets are also briefly provided. The examples clearly evidence the strategic importance of this transformation and its key role in the modern natural products synthetic chemistry toolbox. This methodology proved to be a valuable means for easily building molecular complexity and efficiently delivering step-economic syntheses even of intricate structures, with a promising future.

Step-Economic Total Synthesis of Melosatin A from Eugenol.

An efficient and straightforward route toward the isatin-type natural product melosatin A is reported, employing a trisubstituted aniline as a key intermediate. The latter was synthesized in 4 steps and 60% overall yield from eugenol, through its regioselective nitration, sequentially followed by a Williamson methylation, an olefin cross-metathesis with 4-phenyl-1-butene and the simultaneous reduction of olefin and nitro groups. The final step, a Martinet cyclocondensation of the key aniline with diethyl 2-ketomalonate, provided the natural product with 68% yield.

Efficient Buchwald-Hartwig and nitrene-mediated five-membered ring closure approaches to the total synthesis of quindoline. Unexpected direct conversion of a nitro group into a phosphazene.

Two total syntheses of quindoline, which take place through the intermediacy of 3-nitroquinoline derivatives, are reported. The general synthetic sequence involves construction of the latter by mechanochemical condensation of benzaldehydes with 2-amino-nitrostyrene, followed either by reduction of the nitro group of the heterocycle and Buchwald-Hartwig cyclization or by a nitrene-mediated cyclization under solventless conditions. Use of PPh3 to generate the nitrene resulted in the unprecedented formation of a phosphazene in place of quindoline. This unexpected transformation was explained by means of DFT computations.

Characterization of the hydrochloride salt hemihydrate as a new salt of the antifungal agent tioconazole.

Tioconazole is an effective antifungal agent, which has a very low solubility in aqueous media, that limits its bioavailability and efficacy. In an effort to overcome the drug limitations by improving its solubility, the hydrochloride salt was prepared in methanolic 1 M HCl and obtained as the hemihydrate, as demonstrated by elemental analysis. Single crystals were grown by slow evaporation from an aqueous 1 M HCl solution and their structure was determined using single-crystal X-ray diffraction at 302 K. The structures resulting from dehydration and further rehydration were also assessed, at 333 and 283 K, respectively. The morphology of the crystal, which exhibited birefringence under polarized light, was verified by hot stage microscopy. The solid was characterized by additional means, including thermal analysis (melting point, differential scanning calorimetry and thermogravimetry), spectroscopic methods (mid infrared, near infrared, 1H, 13C and 15N nuclear magnetic resonance in solution, as well as 13C and 15N solid state with spinning at the magic angle) and X-ray diffraction techniques. Functional evaluation tests, including the intrinsic dissolution rate and the dissolution of powders were also performed. In the intrinsic dissolution rate test, the salt proved to dissolve over 2000 times faster than tioconazole. The results suggest that the new salt has physicochemical and performance properties which may support its use as a replacement of the free base in certain applications, especially where improved dissolution rate, solubility or bioavailability of the drug would be desired.

Selected Aspects of the Analytical and Pharmaceutical Profiles of Nifurtimox.

Nifurtimox is a nitroheterocyclic drug employed for treatment of trypanosomiases (Chagas disease and West African sleeping sickness); its use for certain cancers has also been assessed. Despite having been in the market for over 50 years, knowledge of nifurtimox is still fragmentary and incomplete. Relevant aspects of the chemistry and biology of nifurtimox are reviewed to summarize the current knowledge of this drug. These comprise its chemical synthesis and the preparation of some analogues, as well as its chemical degradation. Selected physical data and physicochemical properties are also listed, along with different approaches toward the analytical characterization of the drug, including electrochemical (polarography, cyclic voltammetry), spectroscopic (ultraviolet-visible, nuclear magnetic resonance, electron spin resonance), and single crystal X-ray diffractometry. The array of polarographic, ultraviolet-visible spectroscopic, and chromatographic methods available for the analytical determination of nifurtimox (in bulk drug, pharmaceutical formulations, and biological samples), are also presented and discussed, along with chiral chromatographic and electrophoretic alternatives for the separation of the enantiomers of the drug. Aspects of the drug likeliness of nifurtimox, its classification in the Biopharmaceutical Classification System, and available pharmaceutical formulations are detailed, whereas pharmacological, chemical, and biological aspects of its metabolism and disposition are discussed.

Solid-state properties of Nifurtimox. Preparation, analytical characterization, and stability of an amorphous phase.

Nifurtimox (NFX) is a nitrofuran derivative used to treat Chagas disease, a neglected disease caused by the protozoan Trypanosoma cruzi. The drug is very sparingly soluble in aqueous media and no other solid phases of NFX have been reported to date. The preparation of the amorphous mode of NFX is reported, as well as its characterization by hot stage microscopy, thermal (differential scanning calorimetry and thermogravimetric analysis), spectroscopic (solid state nuclear magnetic resonance, mid-infrared, and near-infrared), diffractometric and functional (powder dissolution rate) means. The stability of the new phase was investigated. This was characterized using thermal, spectroscopic, and diffractometric methods, finding out its spontaneous reversion to the crystalline state, as sign of instability. In addition, the amorphous material proved to be sensitive to temperature, pressure, and mechanical stress, all of which accelerated phase conversion. However, it was able to remain stable in a model polymeric amorphous solid dispersion with PEG 4000 for more than one month. An approach for monitoring the conversion of the amorphous phase to its crystalline counterpart under thermal stress by chemometric analysis of mid-infrared spectra at different temperatures is also disclosed.

A study of the heat-mediated phase transformations of praziquantel hydrates. Evaluation of their impact on the dissolution rate.

Comprehensive knowledge of the critical properties of the active pharmaceutical ingredients is a requirement within the modern concept of quality. Praziquantel hemihydrate (HH) and monohydrate (MH) are new solid forms of this antihelmintic agent, which have better solubility properties than the commercial anhydrous solid form (polymorph A). The thermal stability of the hydrates was evaluated, aiming to understand any possible transformation (amorphization, change to a less soluble form). Therefore, HH and MH were prepared along with the related anhydrous solid forms A and B, and characterized employing solid-state nuclear magnetic resonance, powder X-ray diffraction, mid and near infrared spectroscopy, thermal methods and the intrinsic dissolution rate. The transformations of HH and MH under thermal stress conditions were monitored through a variable temperature infrared spectroscopy approach, assisted by multivariate curve resolution with alternating least squares (MCR-ALS), finding that HH undergoes a two-step transformation (HH→B→A) to form A, whereas MH dehydrates directly into form A. This was further confirmed by conventional calorimetric methods (differential scanning calorimetry and thermogravimetry) and powder X-ray diffractometry. The impact of changes in the stressed solid forms and their dissolution rates was also assessed. Significant differences in dissolution performance were found regarding the solid forms produced as a consequence of thermally-induced dehydration.

Total Synthesis of Aqabamycin G, a Nitrophenyl Indolylmaleimide Marine Alkaloid from Vibrio sp. WMBA.

The first total synthesis of the marine alkaloid aqabamycin G is disclosed. The synthetic sequence involved the stepwise addition to maleimide of an indole motif and a substituted diazo-benzenoid unit derived from acetaminophen. An alternative strategy using a protected phenol is also reported.

Form quantitation in desmotropic mixtures of albendazole bulk drug by chemometrics-assisted analysis of vibrational spectra.

Albendazole is a benzimidazole-type active pharmaceutical ingredient, and one of the most effective broad-spectrum anthelminthic agents. The drug has two solid-state forms (ALB I and ALB II) which are desmotropes; both of them seem to be currently marketed. However, using the wrong crystalline solid form for formulation may have an undesired impact on the physicochemical and/or bioavailability properties of the drug product. In order to develop new, simple, and less expensive alternatives toward the determination of the level of albendazole ALB I in its mixtures with ALB II, both desmotropes were prepared, and properly characterized by spectroscopic [solid-state nuclear magnetic resonance and near infrared (NIR)] and diffractometric (powder X-ray diffraction) methods. Then, the NIR and attenuated total reflectance-mid infrared (ATR-MIR) spectra of both forms were conveniently pre-treated and employed for the development and optimization of partial least squares (PLS)-potentiated quantification models (NIR/PLS and ATR-MIR/PLS). The latter were also subjected to validation (accuracy, precision, limits of detection and quantification, etc.) and further used to assess the level of the unwanted ALB II form in the bulk drug. The NIR/PLS method displayed the most satisfactory characteristics, including a limit of quantitation interval of 3.6 ± 1 %w/w; it outperformed both, the ATR-MIR/PLS counterpart (limit of quantitation interval of 14.0 ± 3.4 %w/w) and a previously published and more demanding Raman/PLS alternative.

Thermal decomposition of hexamethylenetetramine: mechanistic study and identification of reaction intermediates via a computational and NMR approach.

In a joint DFT and chemometrics study applied to NMR spectra, we disclose the structure of the main decomposition products of hexamethylenetetramine. The combination of these techniques enabled us to propose the structures of near-identical intermediates of the process and to unveil the structure of the main decomposition product of this priviliged structure.

Eco-friendly methoximation of aromatic aldehydes and ketones using MnCl2.4H2O as an easily accessible and efficient catalyst.

Methoximes are important as a class of intermediates and products, among fine chemicals and specialties. The development of a new, facile and efficient method for their synthesis is reported. The methoximes were properly accessed from the corresponding aromatic aldehydes and ketones in good to excellent yields, under mild conditions, employing the inexpensive and environmentally friendly MnCl2.4H2O as a catalyst (at low loading and without the addition of ligand), in EtOH at 50°C. The scope of the process was systematically assessed.

Evolution of the Synthesis of Remdesivir. Classical Approaches and Most Recent Advances.

The broad-spectrum antiviral Remdesivir, a monophosphate nucleoside analogue prodrug (ProTide), was repurposed. In May 2020, it received emergency approval by the FDA, being the first drug approved to fight the new coronavirus (COVID-19) disease which targets the virus directly. The main synthetic strategies toward Remdesivir, and their relevant modifications, are presented and discussed, to provide a panoramic view of the state-of-the-art and the more important advances in this field. Recent progress, proposed improvements, and uses of novel technologies for the synthetic sequence are also detailed.

Langmuir-Blodgett monolayers holding a wound healing active compound and its effect in cell culture. A model for the study of surface mediated drug delivery systems.

Langmuir and Langmuir-Blodgett films holding a synthetic bioinspired wound healing active compound were used as drug-delivery platforms. Palmitic acid Langmuir monolayers were able to incorporate 2-methyltriclisine, a synthetic Triclisine derivative that showed wound healing activity. The layers proved to be stable and the nanocomposites were transferred to solid substrates. Normal human lung cells (Medical Research Council cell strain 5, MRC-5) were grown over the monomolecular Langmuir-Blodgett films that acted as a drug reservoir and delivery system. The proliferation and migration of the cells were clearly affected by the presence of 2-methyltriclisine in the amphiphilic layers. The methodology is proposed as a simple and reliable model for the study of the effects of bioactive compounds over cellular cultures.

First total synthesis of chromanone A, preparation of related compounds and evaluation of their antifungal activity against Candida albicans, a biofilm forming agent.

A straightforward and convenient approach for the first total syntheses of chromanone A and a related 7-OMe substituted natural product is reported. These unique C-3 substituted 2-hydroxymethyl chromones were recently isolated as fungal metabolites. Chromanone A was synthesized in 25.3% overall yield from the readily available pyrocatechol, whereas the second natural product was prepared in 39.7% global yield. A small library of chromones, including both natural products and some of their synthetic heterocyclic precursors, was evaluated against Candida albicans ATCC 10231, a biofilm forming agent. It was found that 8-methoxy-3-methyl-4-oxo-4H-chromene-2-carbaldehyde, a partially oxidized form of chromanone A, exhibited a minimum inhibitory concentration of 7.8 µg mL-1 and significantly inhibited the yeast's virulence factors, including the adherence to buccal epithelial cells and the secretion of phospholipases, as well as the formation of germ tubes and the generation of the hyphal pseudomycelium. In addition, despite the heterocycle exhibiting non-significant inhibition of the formation of the Candida biofilm, it completely inhibited the growth of C. albicans in preformed biofilms at 62.5 µg mL-1.

Synthesis and evaluation of aromatic methoxime derivatives against five postharvest phytopathogenic fungi of fruits. Main structure-activity relationships.

The antifungal activity of a library of twenty-four aromatic methoximes was examined against five representative postharvest phytopathogenic fungi. The panel included Penicillium digitatum, Penicillium italicum, Rhizopus stolonifer, Botrytis cinerea and Monilinia fructicola, all of which cause relevant economic losses worldwide as a result of affecting harvested fruits. The minimum inhibitory concentrations and minimum fungicidal concentrations of each compound were defined and the main structure-activity relationships were determined. Although other congeners were more potent, drug likeliness considerations pointed to the methoxime derived from 2,4-dihydroxypropiophenone as the compound with the most suitable profile. The morphology of the colonies of the fungal strains treated with the methoxime was examined microscopically and the compound was also tested in freshly harvested peaches and oranges, exhibiting promising control profiles in both fruits, similar to those of the commercial agents Imazalil and Carbendazim.

Preparation and characterization of a new solid form of praziquantel, an essential anthelmintic drug. Praziquantel racemic monohydrate.

Praziquantel (PZQ) is a highly effective low-cost anthelmintic agent used as the first-choice treatment against schistosomiasis. The low solubility of the active is a major drawback for pharmaceutical formulation. A valid approach of the pharmaceutical industry for the improvement of the pharmacotechnical features of the active principles (such as solubility, processability, stability, among others), is the preparation of new solid forms, such as salts, polymorph, and pseudo-polymorph. Herein we report the preparation and characterization of a new solid form PZQ. The PZQ monohydrate (PZQ-MH) was prepared by a solventless procedure from the commercial racemate and the product was characterized at the solid-state employing optical digital microscopy, thermal methods (melting point, differential scanning calorimetry and thermogravimetric analysis), as well as and mid-infrared and near infrared spectroscopies. The chemical structure and content of water were full assessed by 1H nuclear magnetic resonance (NMR) in solution. The amount of water in PZQ-was also determined by different approaches, including thermogravimetric analysis and the loss on drying test. Solid-state 13C NMR (ssNMR) and X-ray powder diffraction (XRPD) completed the structural characterization of the new monohydrate. PZQ-MH showed a crystalline behavior during XRPD experiments and showed relevant differences in spectroscopic, calorimetric, ssNMR and XRPD signals when it was compared with the known crystal (Form A) and amorphous forms of PZQ. The determination of the intrinsic dissolution rate (IDR) of PZQ-MH was carried out as a functional characterization, observing that the new form had slightly higher IDR than Form A.

Furo[3,2-c]coumarins carrying carbon substituents at C-2 and/or C-3. Isolation, biological activity, synthesis and reaction mechanisms.

The isolation, biological activity and synthesis of natural furo[3,2-c]coumarins are presented, covering mainly the developments in the last 35 years. The most relevant approaches toward the synthesis of 2-substituted, 3-substituted and 2,3-disubstituted heterocycles are also discussed, with emphasis on the efficiency of the processes and their mechanisms.

Isolation and synthesis of cryptosanguinolentine (isocryptolepine), a naturally-occurring bioactive indoloquinoline alkaloid.

Cryptosanguinolentine (isocryptolepine) is one of the minor naturally-occurring monomeric indoloquinoline alkaloids, isolated from the West African climbing shrub Cryptolepis sanguinolenta. The natural product displays such a simple and unique skeleton, which chemists became interested in well before it was found in Nature. Because of its structure and biological activity, the natural product has been targeted for synthesis on numerous occasions, employing a wide range of different strategies. Hence, discussed here are aspects related to the isolation of isocryptolepine, as well as the various approaches toward its total synthesis.