Influence of malting procedure on the isoflavonoid content of soybeans.

The goal of this study was to analyse, whether malting technique (consisting of seed hydration, germination and drying) can be used to modify concentration of various isoflavonoids in soybean seeds. Seeds of three soybean varieties were germinated by different lengths of time (from 24 to 120 h) and dried by two different methods, typically used to produce so-called 'light' and 'caramel' malts. It was determined, that malting decreases concentration of 7-O-ß-D-glucosides such as daidzin, genisitin and glycitin, while at the same time increasing concentration of aglycones (daidzein, genistein and glycitein). Increasing time of the germination period increased concentration of aglycones. 'Caramel' type malts were characterised with higher concentration of most of the isoflavonoids (daidzin, daidzein, genistin, genistein and glycitein) than 'light' type malts. Results of this study suggest that soybean malts can be an interesting substrate in the production of various food products with increased aglycone content.

Assessment of green lentil malt as a substrate for gluten-free beer brewing.

The aim of this study was to analyze whether it is possible to brew beer without using cereals so that the produced beverage could be easily accessible for the population suffering from celiac disease and other gluten-related disorders. Green lentil seeds were malted and then mashed using a congress mashing procedure to assess their advantages and disadvantages in the brewing process. Based on the congress mashing procedure, the mashing process needed to produce beer was developed, and beers were produced from the lentil malts germinated during malting for 96 h, 120 h and 144 h. It was possible to produce beers from the lentil malts; however, they were characterized by a lower alcohol content, lower degree of attenuation and some discrepancies between the concentrations of various volatiles (such as acetaldehyde, ethyl acetate, and 1-propanol) compared to the control beer produced from barley malt.

Malting-A method for modifying volatile composition of black, brown and green lentil seeds.

Technique of malting legume seeds is not currently widespread among scientists as well as industrial maltsters. However, this method of seed modification is successfully used by humankind for millennia to improve technological parameters, as well as change taste and aroma of various food products. Three lentil cultivars (black, brown and green) were malted (steeped, germinated for three various time periods and then kilned) to produce nine lentil malts. Malting had significant influence on the volatile composition of lentil seeds. Total concentration of volatiles in the green lentils increased and decreased in the case of black and brown lentils after malting procedure. However, most importantly, in every lentil cultivar the contribution of various groups of compounds (such as aldehydes, alcohols, terpenes or ketones) to the overall volatilome was changed due to the malting procedure.

Physicochemical parameters, sensory profile and concentration of volatile compounds and anthocyanins in beers brewed using potato variety with purple flesh.

In the recent years, beer brewers are experimenting with using various substrates, other than traditional barley malt, water, hops, and yeast for beer production, because new adjuncts to the beer brewing can add new sensory and functional properties to this beverage. Novel potatoes with purple or red-colour flesh are a good and cheap starch source and are rich in bioactive components, which could increase the nutritive value of the produced beer. The aim of the study was to determine whether some part of barley malt can be replaced by the potatoes of purple-colour flesh and assessment of properties of such beer. Beer samples showed increased antioxidant activity, higher concentration of anthocyanins and polyphenol compounds, as well as modified composition of volatiles and lower ethanol content. Beer produced with the addition of 30% of purple potatoes showed acceptable organoleptic qualities in the sensory analysis.

Evaluation of volatile compound profiles and sensory properties of dark and pale beers fermented by different strains of brewing yeast.

To evaluate the differences in the volatile compound profile of dark and pale beers fermented by different strains of brewer's yeast, gas chromatography with flame ionization detection and gas chromatography mass spectrometry analysis of eight beers was carried out. The prevalent group of compounds in all the beers analysed were alcohols (56.41-72.17%), followed by esters (14.58-20.82%), aldehydes (8.35-20.52%), terpenes and terpenoids (1.22-6.57%) and ketones (0.42-1.00%). The dominant higher alcohols were 2-methylpropan-1-ol, 3-methylbutanol, phenethyl alcohol, among aldehydes furfural, decanal, nonanal, and among esters ethyl acetate, phenylethyl acetate and isoamyl acetate. Beers fermented by the top-fermenting yeast Saccharomyces cerevisiae var. diastaticus had the highest volatile content. The addition of dark malt in wort production process had no effect on the total content of volatiles, but for some beers it caused changes in the total content of esters, terpenes and terpenoids. Variations in the total volatile content between beers fermented by different yeast strains are mainly due to esters and alcohols identified. Sensory analysis of beers allowed us to identify the characteristics affected by the addition of dark speciality malts in the production of wort and yeast strains used in the fermentation process.

Technological properties and composition of volatile compounds in winter wheat malts grown with addition of seed meals into soil.

Wheat malts are necessary to produce wheat beers. In this study, wheat was grown with addition of seed meals into the soil, to determine whether such agricultural practice could improve the quality of the grain and, therefore, improve the quality of wheat malt produced from these grains. It was determined, that malt produced from the grains of the winter wheat cultivated with the use of seed meals is characterised with improved technological properties, such as saccharification time, filtration time and extract content and some of the seed meals had a positive impact on the content of various volatile compounds present in the produced malts.

Effect of Hop Varieties and Forms in the Hopping Process on Non-Alcoholic Beer Quality.

The aim of this study was to determine how the hopping technique affects the quality of non-alcoholic beer (NAB). A series of NABs were brewed and tested for basic physicochemical characteristics, profiles of selected volatile compounds, and microbial contamination. The brewing process yielded 13 experimental groups of beers, all of which had an ethanol content of <0.5%v/v. Among the batches brewed with 'Marynka' hops, the pellet form was found to provide the highest concentrations of hop-derived volatile compounds, whereas in the 'Magnum' groups, the extracts and whole hops proved superior. Humulene and caryophyllene were the primary volatiles in terms of quantity. All the brews were contamination-free­no microbes other than yeast cells were detected. Their microbiological purity was also supported by an assay of beer-defect indicators (volatile compounds), which only showed low levels of acetaldehyde, 1-propanol, 2-methylbutanol, and 3-methylbutanol. The hopping technique deployed was found not to affect the physicochemical parameters of NABs, but did have a significant impact on their volatile compound profile.

Changes in the raffinose family oligosaccharides content in the lentil and common bean seeds during malting and mashing processes.

Raffinose family oligosaccharides (RFOs) are sugars, which are considered anti-nutritional substances, which are not digestible by human gastric enzymes and can lead to flatulence. Legume seeds are often rich in these compounds, which can be cumbersome for many people, such as vegetarians or the population of developing countries, whose diets consists of large amounts of these food products. In this study, simple procedures used around the world in the brewing industry (malting and mashing) were used to determine, whether these processes could be applied to popular legume seeds (lentil and bean) to reduce the RFOs content. Acquired malts and worts were characterised by radically decreased concentration (up to 90%) of most ubiquitous RFOs, such as raffinose and stachyose.

Yeast Strains and Wort Color as Factors Affecting Effects of the Ethanol Fermentation Process.

Dark malts used in the production of brewing wort affect the ethanol fermentation process, the phenolic content, antioxidant capacity and the physiology of yeast cells. An innovative element of this research is the combination of investigating the effect of beer wort color modulated by the use of dark specialty malts on the course and effects of fermentation and the characteristics of post-fermentation yeast biomass of brewer's strains with different characteristics. Dark and pale beer were obtained. The beers had different ethanol contents (4.51-5.79% v/v), resulting from real (62.29-80.36%) and apparent (75.37-98.26%) attenuation levels. Metabolic and morphological differences were demonstrated in the brewer's yeast strains used. S. cerevisiae var. diastaticus was distinguished by its ability to ferment dextrin, resulting in the highest ethanol content in beers. The total phenolic content in beer depends on the color of the wort and the yeast strain used (244.48-547.56 mg of gallic acid/L). Dark beers show higher ferric ion reduction ability (FRAP) and antioxidant capacity (ABTS•+) than pale beers fermented with the same yeast strains. Through biomass analysis, differences in yeast cell physiology depending on yeast strain and beer wort color were also revealed.

The Use of Barley Malt as a Binder in Molding Sand Technology.

The aim of this study was to attempt to use barley malt as a natural, organic binder in the technology of molding sand. TGA analysis of the binder was performed, during which temperatures of thermal decomposition of its components were determined. The results of TG/DTG analysis show that a loss of ~75% of mass of the MB binder is organic matter. Over 50% of this is starch. The results indicate the possibility of using a binder made of barley malt as a binding material for quartz sand grains. This fact was confirmed by tests carried out with use of SEM. During the observations, it was found that barley malt forms smooth bridges connecting individual grains of quartz sand. The typical properties of molding sands with barley malt were also determined, compared to sands containing commonly used binders. At the same time, the influence of the content of this binder on flowability, permeability, strength properties, and wear resistance was assessed. It has been found that increasing the binder content in molding mass results in an increase in strength and wear resistance, as opposed to flowability and permeability. Test castings were also made. It was found that the addition of a binder made of barley malt has a positive effect on the surface quality of castings. This was confirmed by roughness measurements of the test castings. At the same time, a tendency to excessive gas evolution during pouring was shown, with higher contents of this binder. Moreover, greater amounts of barley malt in the molding sand (MB 5%) as compared to the lower content (MB 2%) increased the thickness of the burnt layer of the sand by 25%. This is due to the exothermic reaction when more binder is burnt. It is extremely important from the point of view of the regeneration of molding sand.

Characteristics of New England India Pale Ale Beer Produced with the Use of Norwegian KVEIK Yeast.

The aim of this research was to determine the potential of four unconventional Norwegian yeasts of the KVEIK type to produce NEIPA beer. The influence of yeast strains on fermentation process, physicochemical properties, antioxidant potential, volatile compounds, and sensory properties was investigated. The KVEIK-fermented beer did not differ in terms of physicochemical parameters from the beer produced with the commercial variants of US-05 yeast. The yeast strain influenced the sensory quality (taste and aroma) of the beers, with KVEIK-fermented beer rating significantly higher. The antioxidant activity of the tested beers also significantly depended on the yeast strain applied. The beers fermented with KVEIK had a significantly higher antioxidant potential (ABTS•+) than those fermented with US-05. The strongest antioxidant activity was found in the beer brewed with the Lida KVEIK yeast. The use of KVEIK to produce NEIPA beer allowed enrichment of the finished products with volatile compounds isobutanol, 2-pentanol, 3-methylobutanol, ethyl octanoate, and ethyl decanoate.

Effect of Added Brewer's Spent Grain on the Baking Value of Flour and the Quality of Wheat Bread.

This study was undertaken to determine the effect of the partial replacement of wheat flour (WF) with barley brewer's spent grain (BBSG) and barley-buckwheat brewer's spent grain (BBSG + B) on dough quality and bread properties, including nutritional value. The contents of brewer's spent grain (BSG) in the blend with wheat flour were 0, 10, and 20%. The quality of the flour blends was assessed with intermediate methods and based on laboratory baking. Analyses were also carried out to determine contents of basic nutrients and energy value. The replacement of part of wheat flour with BBSG and BBSG + B diminished gluten yield and deteriorated its quality (a decreased sedimentation value and stability, and increased dough softening). Changes were also observed in the starch-enzymatic system, resulting in a decreased falling number and maximum paste viscosity. Breads containing both BSG types featured higher yield and lower loaf volume. They had also higher contents of protein, dietary fibre, fat, and ash as well as a lower energy value compared to the wheat bread. Considering the organoleptic traits of breads, the 10% replacement of wheat flour with BSG is recommended in the blend. The BBSG + B was found to elicit more beneficial effects on bread properties than BBSG.

Application of white grape pomace in the brewing technology and its impact on the concentration of esters and alcohols, physicochemical parameteres and antioxidative properties of the beer.

Main by-product of white wine production is white grape pomace (WGP). It has attracted attention of food scientists, because it possesses high concentration of nutrients and bioactive substances. In this study, WGP was added to the beer after primary fermentation in two different concentrations (10% w/w and 20% w/w) and two different pretreatments (pasteurised and unpasteurised) to determine, whether the most abundant waste from white wine industry could be used to modify the volatilome and phenolic content of the beer. The addition of white grape pomace increased the concentration of phenolic compounds in all of the tested beers (from 321.584 mg gallic acid equivalent (GAE)/dm3 to 501.459 mg GAE/dm3). Antioxidant activity of the beers with addition of WGP (tested with the ABTS+•, DPPH• and FRAP assays) also increased. The composition of volatiles in beers changed as WGP was added. The most significant difference was in the concentration of acetaldehyde - beers with WGP added had 4-7 times lower acetaldehyde content (17.425-31.425 mg/dm3) than the control sample (134.050 mg/dm3).

The Potential of Traditional Norwegian KVEIK Yeast for Brewing Novel Beer on the Example of Foreign Extra Stout.

The development of craft brewing has spurred huge interest in unusual and traditional technologies and ingredients allowing the production of beers that would fulfil consumers' growing demands. In this study, we evaluated the brewing performance of traditional Norwegian KVEIK yeast during the production of Foreign Extra Stout beer. The content of alcohol of the KVEIK-fermented beer was 5.11-5.58% v/v, the extract content was 5.05-6.66% w/w, and the pH value was 4.53-4.83. The KVEIK yeast was able to completely consume maltose and maltotriose. The mean concentration of glycerol in KVEIK-fermented beers was higher than in the control sample (1.51 g/L vs. 1.12 g/L, respectively). The use of KVEIK-type yeast can offer a viable method for increasing the concentration of phenolic compounds in beer and for boosting its antioxidative potential. The beers produced with KVEIK-type yeast had a total phenol content of 446.9-598.7 mg GAE/L, exhibited antioxidative potential of 0.63-1.08 mM TE/L in the DPPH• assay and 3.85-5.16 mM TE/L in the ABTS•+ assay, and showed a ferric ion reducing capacity (FRAP) of 3.54-4.14 mM TE/L. The KVEIK-fermented bears contained various levels of volatile compounds (lower or higher depending on the yeast strain) and especially of higher alcohols, such as 3-metylobutanol, 2-metylobutanol, and 1-propanol, or ethyl esters, such as ethyl acetate or decanoate, compared to the control beers. In addition, they featured a richer fruity aroma (apricot, dried fruit, apples) than the control beers fermented with a commercial US-05 strain.

Changes in the Antioxidative Activity and the Content of Phenolics and Iridoids during Fermentation and Aging of Natural Fruit Meads.

The aim of the study was to investigate changes in the content of biologically active compounds during the fermentation and aging of natural meads with the addition of three Cornelian cherry juices from three cultivars: 'Koralovyi', 'Podolski' and 'Yantarnyi', in the amount of 10% v/v. After the fermentation process the content of gallic and ellagic acids significantly increased, in relation to wort. Whereas the greatest losses were observed among unstable anthocyanins. The three-month aging process also reduced the content of the analyzed compounds except for ellagic acid, the content of which increased by up to 90%. The content of biologically active compounds, including iridoids and antioxidant phenolics, are constantly changing in the process of fermentation and aging of fruit meads. The studies proved that the addition of Cornelian cherry juice allows significantly enriched classic meads with new biologically active compounds, such as: exceptional iridoids (loganic acid, cornuside, loganine, sweroside), flavonols, phenolic acids and anthocyanins.

Properties of Dry Hopped Dark Beers with High Xanthohumol Content.

The antioxidant activity of beers comes mainly from phenolic compounds and melanoidins. The aim of this research was to evaluate the effect of technological operations, especially the ethanol fermentation process using top fermentation brewer's yeast Saccharomyces cerevisiae, on the antioxidant activity of dark dry hopped beers with a high xanthohumol content. Four beers were produced using different varieties of hops. The polyphenol content during beer processing increased at the stage of hopping and fermentation, while it decreased during aging. The ability to reduce iron ions increased for all beers compared to hopped wort. The opposite tendency was noted for the antioxidant capacity expressed as the ability to reduce the radical cation ABTS•+ generated from 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid). Fermentation and aging caused a decrease in beer color intensity. The content of 5-hydroxymethylfurfural (5-HMF) increased with the color intensity of wort, therefore in beers no presence of 5-HMF was observed. The beers were characterized by a distinctly high content of xanthohumol in the range of 1.77-3.83 mg/L and 0.85-1.19 mg/L of isoxanthohumol. The content of prenylflavonoids and bitterness of beer depended on the variety of hops used.

Analysis of Physicochemical Parameters of Congress Worts Prepared from Special Legume Seed Malts, Acquired with and without Use of Enzyme Preparations.

This study was conducted to produce malt from legume seeds (chickpea, lentil, pea, and vetch) and test whether malting with parameters, typically barley grain, will result in well-modified legume seed malt. Analysis of malt was performed by producing congress worts from legume seed malts. Concentration of phenolic compounds, as well as antioxidant activity of legume seed malts was analysed. Acquired worts were characterised with poor technological characteristics (wort extract, wort volume, saccharification time, brewhouse efficiency); however, the malting process increased concentration of phenolic compounds and antioxidant activity of the plant material. Subsequent mashing tests with addition of different external enzymes and/or gelatinisation of legume seed malt were performed. Use of external enzymes improved saccharification time, extract content, wort volume, as well brewhouse efficiency in the case of some legume seed malts. The best brewhouse efficiencies and highest extract values were acquired by the samples prepared with 30% of gelatinised vetch malt or chickpea malt mixed with 70% of Pilsner malt. The study shows that there is possibility of creating legume seed malts, but malting and mashing characteristics need to be customised for these special malts.

Carbohydrates Profile, Polyphenols Content and Antioxidative Properties of Beer Worts Produced with Different Dark Malts Varieties or Roasted Barley Grains.

The aim of this study was to assess the possibility of shaping properties of beers at the stage of brewing wort production with the use of various types of special malts (chocolate pale, chocolate dark, wheat chocolate, brown barley) and roasted barley grains. The carbohydrate profile, polyphenols content, antioxidant capacity, 5-hydroxymethylfurfural content, and the browning index level were analyzed. Statistical analysis showed significant differences in the values of the examined features between the samples. The sugars whose content was most affected by the addition of special malts were maltose and dextrins. The polyphenol content in worts with 10% of additive was 176.02-397.03 mg GAE/L, ferric reducing antioxidant power (FRAP) 1.32-2.07 mmol TE/L, and capacity to reduction radical generated from 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS•+) 1.46-2.70 mmol TE/L. Wort with 40% dark malt showed the highest content of polyphenolic compounds and antioxidant activity (FRAP and ABTS•+). The HMF content and the browning index value were higher for wort with the addition of darker-colored malts (EBC) and increased with increasing dark malt dose.

Analysis of Volatile Compounds and Sugar Content in Three Polish Regional Ciders with Pear Addition.

Aroma plays important part in cider acceptability to the consumer. In this study, techniques such as headspace solid-phase microextraction (HS-SPME), which has been coupled with gas chromatography and mass spectrometry, have been used to assess what changes in the volatilome occur during fermentation of three apple cultivars (Cortland, Gala, Idared) with and without addition of pear (Konferencja) juice addition. Analysis of volatiles has shown that temperature of fermentation, apple variety and pear juice addition have significant influences on the volatile compositions of the acquired ciders. Ciders prepared in laboratory conditions fermented at 15 °C were characterized by a greater share of esters, such as ethyl hexanoate, ethyl decanoate and ethyl dodecanoate, in volatile profile (66.24-79.58%) than ciders fermented at 20 °C (58.81-77.22%). Ciders fermented at a higher temperature were characterized by a greater share of alcohols, such as phenylethyl alcohol and hexan-1-ol (18.34-36.7%) than ciders fermented at a lower temperature (16.07-25.35%). In the ciders prepared from pear (20% w/w) and apple (80% w/w) juice, the presence of esters, such as ethyl (2E, 4Z)-deca-2,4-dienoate, characterized by a pear aroma, could be noted.