Chemical Storage of Ammonia through Dynamic Structural Transformation of a Hybrid Perovskite Compound.

Toward renewable energy for global leveling, compounds that can store ammonia (NH3), a carbon-free energy carrier of hydrogen, will be of great value. Here, we report an organic-inorganic halide perovskite compound that can chemically store NH3 through dynamic structural transformation. Upon NH3 uptake, a chemical structure change occurs from a one-dimensional columnar structure to a two-dimensional layered structure by addition reaction. NH3 uptake is estimated to be 10.2 mmol g-1 at 1 bar and 25 °C. In addition, NH3 extraction can be performed by a condensation reaction at 50 °C under vacuum. X-ray diffraction analysis reveals that reversible NH3 uptake/extraction originates from a cation/anion exchange reaction. This structural transformation shows the potential to integrate efficient uptake and extraction in a hybrid perovskite compound through chemical reaction. These findings will pave the way for further exploration of dynamic, reversible, and functionally useful compounds for chemical storage of NH3.

Nanocomposite Hydrogels Containing Few-Layer Graphene Sheets Prepared through Noncovalent Exfoliation Show Improved Mechanical Properties.

Hydrogels show great potential as soft materials for biomedical applications and flexible devices. However, conventional hydrogels exhibit poor mechanical strengths owing to the presence of water in their polymer networks. Therefore, improving the mechanical properties of hydrogels by controlling the chemical and physical structures that affect their macroscopic behaviors is a challenging issue. In this study, we developed a nanocomposite (NC) hydrogel that harbors exfoliated few-layer graphene sheets through noncovalent interactions. The bifunctional polymer PImQ, which contains both aromatic and cationic groups, was found to enable the direct exfoliation of graphite to few-layer graphene through π-π interactions in 2.7% yield. The poly(acrylamide)-based NC hydrogel containing the PImQ/graphene composite as a nanofiller shows a 3.4-fold increase in tensile stress compared with the hydrogel without the nanofiller. The introduction of the PImQ/graphene nanocomposite also increases the fracture stress of the NC hydrogel through cation-π and π-π interactions. The improved mechanical properties of the NC hydrogel result from the synergistic effects of the chemical crosslinking of the polymer network and the physical crosslinking of the polymer/graphene nanofiller.

Noncovalent Functionalization of Single-Walled Carbon Nanotubes with a Photocleavable Polythiophene Derivative.

Single-walled carbon nanotubes (SWCNTs) have received extensive research attention owing to their extraordinary optical, electrical, and mechanical properties, which make them particularly attractive for application in optoelectronic devices. However, SWCNTs are insoluble in almost all solvents. Therefore, developing methods to solubilize SWCNTs is crucial for their use in solution-based processes. In this study, we developed a photocleavable polythiophene-derivative polymer dispersant for SWCNTs. The noncovalent surface functionalization of SWCNTs with a polymer allows their dispersal in tetrahydrofuran. The resultant solution-processed polymer/SWCNT composite film undergoes a hydrophobic-to-hydrophilic change in surface properties upon light irradiation (313 nm) because hydrophilic carboxyl groups are formed upon photocleavage of the hydrophobic solubilizing units in the polymer. Furthermore, the photocleaved composite film displays a 38-fold increase in electrical conductivity. This is due to the removal of the solubilizing unit, which is electrically insulating.

Conjugation of biphenyl groups with poly(ethylene glycol) to enhance inhibitory effects on the PD-1/PD-L1 immune checkpoint interaction.

Monoclonal antibodies have been developed as anticancer agents to block immune checkpoint pathways associated with programmed cell death 1 (PD-1) and its ligand PD-L1. However, the high cost of antibodies has encouraged researchers to develop other inhibitor types. Here, biphenyl compounds were conjugated with poly(ethylene glycol) (PEG) to enhance the activity of small molecular inhibitors. Immunoassay results revealed the decrease in the inhibition activity following conjugation with linear PEG, suggesting that the PEG moiety reduced the interaction between the biphenyl structure and PD-L1. However, the inhibitory effect on PD-1/PD-L1 interaction was further enhanced by using branched PEG conjugates. The increase in the number of conjugated biphenyl compounds resulted in increased inhibitory activity. The highest IC50 value was 0.33 µM, which was about 5 times higher than that observed for a non-conjugated monovalent compound. The inhibitory activity was more than 20 times the activity reported for the starting compound. Considering the increase in the inhibition activity, this multivalent strategy can be useful in the design of new immune checkpoint inhibitors.

Preparation of Biphenyl-Conjugated Bromotyrosine for Inhibition of PD-1/PD-L1 Immune Checkpoint Interactions.

Cancer immunotherapy has been revolutionized by the development of monoclonal antibodies (mAbs) that inhibit interactions between immune checkpoint molecules, such as programmed cell-death 1 (PD-1), and its ligand PD-L1. However, mAb-based drugs have some drawbacks, including poor tumor penetration and high production costs, which could potentially be overcome by small molecule drugs. BMS-8, one of the potent small molecule drugs, induces homodimerization of PD-L1, thereby inhibiting its binding to PD-1. Our assay system revealed that BMS-8 inhibited the PD-1/PD-L1 interaction with IC50 of 7.2 µM. To improve the IC50 value, we designed and synthesized a small molecule based on the molecular structure of BMS-8 by in silico simulation. As a result, we successfully prepared a biphenyl-conjugated bromotyrosine (X) with IC50 of 1.5 µM, which was about five times improved from BMS-8. We further prepared amino acid conjugates of X (amino-X), to elucidate a correlation between the docking modes of the amino-Xs and IC50 values. The results suggested that the displacement of amino-Xs from the BMS-8 in the pocket of PD-L1 homodimer correlated with IC50 values. This observation provides us a further insight how to derivatize X for better inhibitory effect.

Synthesis of Photoreactive Poly(ethylene oxide)s for Surface Modification.

Photoreactive polymers that generate active species upon irradiation with light are very useful for modifying the surfaces of substrates. However, water solubility decreases as the number of photoreactive functional groups on the polymer increases because most photoreactive functional groups are hydrophobic. In order to improve the hydrophilicity of the photoreactive polymer, we synthesized polyethylene glycol-based photoreactive polymers bearing hydrophobic azidophenyl groups on their side chains. Because of the hydrophilicity of the ethylene glycol main chain, polymers with large numbers of azidophenyl groups were solubilized in protic solvents compared to hydrophobic alkylene chain-based polymers prepared by radical polymerization of methacrylate monomers. Polymers were immobilized on various substrates by irradiation with ultraviolet light and were shown to suppress nonspecific interactions between proteins and cells on the substrate. We conclude that such polymers are useful, highly water soluble antifouling agents.

Noncovalent Modification of Single-Walled Carbon Nanotubes Using Thermally Cleavable Polythiophenes for Solution-Processed Thermoelectric Films.

Four thermally cleavable polythiophene derivatives containing carbonate and solubilizing groups were synthesized for noncovalent modification of single-walled carbon nanotubes (SWCNTs). A well-dispersed polythiophene/SWCNTs composite was obtained by adsorption of the polymer at the SWCNT surface. The solution-processed composite film exhibited solid-state thermal cleavage of the insulating solubilizing group through decarboxylation, producing an insoluble composite film. The thermally cleavable composite film was evaluated for potential application as a thermoelectric (TE) material. The electrical conductivity (σ) of the thermally treated composite film was up to 250 times higher than that of the as-prepared composite film. The increased σ contributed to an increase in the power factor (PF). The ethanol-processed composite film could be applicable for green processing of a TE material using the less-toxic solvent. The substrate-free polythiophene/SWCNTs composite film prepared by simple solvent evaporation yielded a figure-of-merit of 3.1 × 10-2 with a PF of 28.8 µW m-1 K-2 at 25 °C. This solution-processed methodology is beneficial for the development of a flexible TE material.

Controlled quercetin release from high-capacity-loading hyperbranched polyglycerol-functionalized graphene oxide.

PURPOSE: An efficient drug-delivery system was prepared based on graphene oxide using a facile and one-step strategy for controlling the release of anticancer drugs. METHODS: Fabrication of single-layer graphene oxide (GO) sheets was carried out by both modified and improved Hummers method. Biocompatible hyperbranched polyglycerol (HPG) was grafted on the surface of GO through the ring-opening hyperbranched polymerization of glycidol. Various ratios of GO and glycidol were used for polymer grafting. An anticancer drug, quercetin (Qu), was loaded into modified GO via noncovalent interactions. RESULTS: Polymer grafting on the surface of GO sheets was confirmed by results obtained from Fourier-transform infrared and Raman spectroscopy, thermogravimetric analysis, energy-dispersive X-ray and X-ray spectroscopy, scanning electron microscopy, and atomic force microscopy. It was revealed that polymerization increased d-spacing between the basal planes. In addition, as a hydrophilic polymer, HPG improved the stability and dispersion of GO sheets in biological solutions and endowed extra drug-loading capacity for the sheets. The effect of hyperbranched structure on drug loading and release was investigated by comparing drug loading and release for HPG-modified GO and linear PPO-modified GO. Our experiments indicated high drug-loading capacity (up to 185%), and excellent encapsulation efficiency (up to 93%) for HPG-GO compared to linear PO-grafted GO. The release profile of Qu under various pH levels exhibited controlled and sustained drug release without an initial burst effect for HPG-GO, suggesting that an acidic solution could facilitate drug release. HPG-GO did not show any cytotoxicity on the MCF7 cell line in different concentrations during 72 hours' incubation. Uptake and entrance of HPG-GO into the cells were verified by determining the intracellular amount of Qu by high-performance liquid chromatography. CONCLUSION: A combination of the unique properties of GO and the biodegradable polymer polyglycerol revealed high drug-loading capacity, pH-dependent drug release, and cytocompatibility with HPG-GO, thus introducing it as a promising nanocarrier for anticancer drug delivery.

Thiophene-Conjugated Ligand Probe for Nonenzymatic Turn-On Electrochemical Protein Detection.

A new type of turn-on electrochemical protein detection is developed using an electropolymerizable molecular probe. To detect trypsin, a benzamidine ligand is conjugated with a thiophene moiety. Encapsulation of the probe in the trypsin pocket prevents electropolymerization, leading to efficient electron transfer from the electrolyte to the electrode. In contrast, unbound probes can become electropolymerized, yielding a polythiophene layer on the electrode. The polythiophene formed this way suppressed electron transfer. The detection limit of trypsin using this electrochemical strategy is 50 nM. The method is shown to be useful for nonenzymatic turn-on electrochemical detection.

Direct Aqueous Dispersion of Carbon Nanotubes Using Nanoparticle-Formed Fullerenes and Self-Assembled Formation of p/n Heterojunctions with Polythiophene.

Single-walled carbon nanotubes (SWCNTs) have received much attention because of their potential in optoelectronic applications. Pristine SWCNTs exhibit substantial van der Waals interactions and hydrophobic characteristics, so precipitation occurs immediately in most organic solvents and water. Highly toxic and hazardous chemicals are often used to obtain well-dispersed SWCNTs. Developing environmentally friendly processing methods for safe and practical applications is a great challenge. Here, we demonstrate direct exfoliation of SWCNTs in pure water only with n-type semiconducting fullerene nanoparticles. The resultant SWCNTs can be well-dispersed in water, where they remain essentially unchanged for several weeks. Adding an aqueous solution of p-type semiconducting water-soluble polythiophene yields self-assembled p/n heterojunctions between polythiophene and the nanoparticles. The aqueous-dispersed SWCNTs yield photocurrent responses in solution-processed thin films as a potential application of water-dispersed carbon nanomaterials.

Green Processing of Carbon Nanomaterials.

Carbon nanomaterials (CNMs) from fullerenes, carbon nanotubes, and graphene are promising carbon allotropes for various applications such as energy-conversion devices and biosensors. Because pristine CNMs show substantial van der Waals interactions and a hydrophobic nature, precipitation is observed immediately in most organic solvents and water. This inevitable aggregation leads to poor processability and diminishes the intrinsic properties of the CNMs. Highly toxic and hazardous chemicals are used for chemical and physical modification of CNMs, even though efficient dispersed solutions are obtained. The development of an environmentally friendly dispersion method for both safe and practical processing is a great challenge. Recent green processing approaches for the manipulation of CNMs using chemical and physical modification are highlighted. A summary of the current research progress on: i) energy-efficient and less-toxic chemical modification of CNMs using covalent-bonding functionality and ii) non-covalent-bonding methodologies through physical modification using green solvents and dispersants, and chemical-free mechanical stimuli is provided. Based on these experimental studies, recent advances and challenges for the potential application of green-processable energy-conversion and biological devices are provided. Finally, a conclusion section is provided summarizing the insights from the present studies as well as some future perspectives.

An autonomous actuator driven by fluctuations in ambient humidity.

Devices that respond to negligibly small fluctuations in environmental conditions will be of great value for the realization of more sustainable, low-power-consumption actuators and electronic systems. Herein we report an unprecedented film actuator that seemingly operates autonomously, because it responds to the adsorption and desorption of a minute amount of water (several hundred nanograms per 10 mm(2)) possibly induced by fluctuations in the ambient humidity. The actuation is extremely rapid (50 ms for one curl) and can be repeated >10,000 times without deterioration. On heating or light irradiation, the film loses adsorbed water and bends quickly, so that it can jump vertically up to 10 mm from a surface or hit a glass bead. The film consists of a π-stacked carbon nitride polymer, formed by one-pot vapour-deposition polymerization of guanidinium carbonate, and is characterized by a tough, ultralightweight and highly anisotropic layered structure. An actuator partially protected against water adsorption is also shown to walk unidirectionally.

Solubilization of single-walled carbon nanotubes using a peptide aptamer in water below the critical micelle concentration.

The solubilizing ability of single-walled carbon nanotubes (SWCNTs) in water with several dispersants was investigated. Among the dispersants, including low-molecular-weight surfactants, peptides, DNA, and a water-soluble polymer, the peptide aptamer, A2 (IFRLSWGTYFS), exhibited the highest dispersion capability below the critical micelle concentration at a concentration of 0.02 w/v%. The dispersion of supernatant aqueous solution of SWCNTs containing aptamer A2 was essentially unchanged for several months after high-speed ultracentrifugation and gave rise to an efficient and stable dispersion of the SWCNTs in water. From the results of isothermal titration calorimetry and molecular dynamics simulations, the effective binding capability of A2 was due to π-π interaction between aromatic groups in the peptide aptamer and the side walls of SWCNTs. Interestingly, the peptide aptamer showed the possibility of diameter separation of semiconducting SWCNTs using a uniform density gradient ultracentrifuge. These phenomena are encouraging results toward an effective approach to the dispersion and separation of SWCNTs.

In vitro selection of a photoresponsive peptide aptamer to glutathione-immobilized microbeads.

Photoresponsive peptide aptamer to glutathione-immobilized microbeads was in vitro selected using ribosome display incorporated with tRNA carrying an amino acid coupled with an azobenzene.

Fusion of photochromic reaction and synthetic reaction: photoassisted cyclization to highly strained chiral azobenzenophanes.

A method for synthesizing highly strained cyclic structures by combining photochromic and synthetic reactions is described. Tightly linked azobenzene-binaphthyl dyads (R)-4 and (R)-6 could not be obtained by conventional cyclization, but continuous application of photoirradiation, which induced (E)→(Z) isomerization of the azobenzene moiety, allowed the cyclization reaction to proceed, affording the desired chiral azobenzenophanes.

Photoinversion of cisoid/transoid binaphthyls.

Axially chiral binaphthyl-azobenzene cyclic dyads in which the two moieties are connected by two linkers of different lengths were synthesized. In the case of benzylated-binaphthyl analogue 2b, photoirradiation resulted in a dramatic change of the CD spectrum and optical rotation. Experimental and theoretical analyses indicated that the dihedral angle of the two naphthalene rings is strongly coupled to the azobenzene photoisomerization; cis-azobenzene induces a transoid-binaphthyl structure, while trans-azobenzene induces a cisoid-binaphthyl structure.

Mass migration on a polymer surface caused by photoinduced molecular rotation.

We demonstrated the formation of a photoinduced surface relief grating using thin films comprising a photochromic molecular motor, 9-(2-phenyl-2,3-dihydro-cyclopenta[a]naphthalen-1-ylidene)-9H-fluorene. Results show that mass migration occurred by patterned light irradiation prepared from interfered laser beams and a photomask.

Planar chirality of twisted trans-azobenzene structure induced by chiral transfer from binaphthyls.

The absolute configuration of a binaphthyl-azobenzene dyad 2b, which has a chiral axis and a chiral plane, was determined by comparing the experimental circular dichroism (CD) spectra with the theoretical CD spectra calculated by the time-dependent (TD)-DFT method. The CD signals of the trans-azobenzene moiety indicated that the two benzene rings of this moiety are twisted unidirectionally. It is suggested that these dyads with shorter linkers may be suitable for use as chiroptical switches.

Synthesis and conformation of substituted chiral binaphthyl-azobenzene cyclic dyads with chiroptical switching capabilities.

Optically active binaphthyl-azobenezene cyclic dyads were synthesized to develop a photochromic switching molecule. Azobenezene moieties were cis-trans isomerized by photoirradiation. As a reflection of the structural change, the specific optical rotation and circular dichroism underwent significant shifts. Under certain conditions, the positive-negative and zero-positive (or zero-negative) signals were reversed. Optical rotation may potentially be applied in noise-cancelling nondestructive photoswiches. The conformations were studied by experimental and theoretical methods. The results revealed that the helical chirality, (P) or (M), of the cis-azobenzene moiety was induced by intramolecular axial chirality. The twist direction depended on the axial chirality as well as the azobenzene linkage position to the binaphthyls, but was independent of the identity of substituted groups. 2,2'-Linked-(R)-binaphthyl was found to induce cis-(P)-azobenzene, whereas symmetrically 7,7'-linked-(R)-binaphthyl was found to induce cis-(M)-azobenzene.