Adjustable Mixed Conductive Interphase for Dendrite-Free Lithium Metal Batteries.

Lithium (Li) metal batteries with high energy density are of great promise for next-generation energy storage; however, they suffer from severe Li dendritic growth and an unstable solid electrolyte interphase. In this study, a mixed ionic and electronic conductive (MIEC) interphase layer with an adjustable ratio assembled by ZnO and Zn nanoparticles is developed. During the initial cycle, the in situ formed Li2O with high ionic conductivity and a lithiophilic LiZn alloy with high electronic conductivity enable fast Li+ transportation in the interlayer and charge transfer at the ion/electron conductive junction, respectively. The optimized interface kinetics is achieved by balancing the ion migration and charge transfer in the MIEC Li2O-LiZn interphase. As a result, the symmetric cell with MIEC interphase delivers superior cycling stability of over 1200 h. Also, Li||Zn-ZnO@PP||LFP (LFP = LiFePO4) full cells exhibit long cyclic life for 2000 cycles with a very high capacity retention of 91.5% at a high rate of 5 C and stable cycling for 350 cycles at a high LFP loading mass of 13.27 mg cm-2.

Constructing Robust Cross-Linked Binder Networks for Silicon Anodes with Improved Lithium Storage Performance.

Despite the high specific capacity of silicon as a promising anode material for the next-generation high-capacity Li-ion batteries (LIBs), its practical applications are impeded by the rapid capacity decay during cycling. To tackle the issue, herein, a binder-grafting strategy is proposed to construct a covalently cross-linked binder [carboxymethyl cellulose/phytic acid (CMC/PA)], which builds a robust branched network with more contact points, allowing stronger bonds with Si nanoparticles by hydrogen bonding. Benefitting from the enhanced mechanical reliability, the resulting Si-CMC/PA electrodes exhibit a high reversible capacity with improved long-term cycling stability. Moreover, an assembled full cell consisting of the as-obtained Si-CMC/PA anode and commercial LiFePO4 cathode also exhibits excellent cycling performance (120.4 mA h g-1 at 1 C for over 100 cycles with 88.4% capacity retention). In situ transmission electron microscopy was employed to visualize the binding effect of CMC/PA, which, unlike the conventional CMC binder, can effectively prevent the lithiated Si anodes from cracking. Furthermore, the combined ex situ microscopy and X-ray photoelectron spectroscopy analysis unveils the origin of the superior Li-ion storage performance of the Si-CMC/PA electrode, which arises from its excellent structural integrity and the stabilized solid-electrolyte interphase films during cycling. This work presents a facile and efficient binder-engineering strategy for significantly improving the performance of Si anodes for next-generation LIBs.

Preparation and Electrochemical Properties of Pomegranate-Shaped Fe2O3/C Anodes for Li-ion Batteries.

Due to the severe volume expansion and poor cycle stability, transition metal oxide anode is still not meeting the commercial utilization. We herein demonstrate the synthetic method of core-shell pomegranate-shaped Fe2O3/C nano-composite via one-step hydrothermal process for the first time. The electrochemical performances were measured as anode material for Li-ion batteries. It exhibits excellent cycling performance, which sustains 705 mAh g-1 reversible capacities after 100 cycles at 100 mA g-1. The anodes also showed good rate stability with discharge capacities of 480 mAh g-1 when cycling at a rate of 2000 mA g-1. The excellent Li storage properties can be attributed to the unique core-shell pomegranate structure, which can not only ensure good electrical conductivity for active Fe2O3, but also accommodate huge volume change during cycles as well as facilitate the fast diffusion of Li ion.