RESUMO
Treating the amide acetanilide (N-phenylacetamide, C8H9NO) with aqueous strong acids allowed the structures of five hemi-protonated salt forms of acetanilide to be elucidated. N-(1-Hydroxyethylidene)anilinium chloride-N-phenylacetamide (1/1), [(C8H9NO)2H][Cl], and the bromide, [(C8H9NO)2H][Br], triiodide, [(C8H9NO)2H][I3], tetrafluoroborate, [(C8H9NO)2H][BF4], and diiodobromide hemi(diiodine), [(C8H9NO)2H][I2Br]·0.5I2, analogues all feature centrosymmetric dimeric units linked by O-H...O hydrogen bonds that extend into one-dimensional hydrogen-bonded chains through N-H...X interactions, where X is the halide atom of the anion. Protonation occurs at the amide O atom and results in systematic lengthening of the C=O bond and a corresponding shortening of the C-N bond. The size of these geometric changes is similar to those found for hemi-protonated paracetamol structures, but less than those in fully protonated paracetamol structures. The bond angles of the amide fragments are also found to change on protonation, but these angular changes are also influenced by conformation, namely, whether the amide group is coplanar with the phenyl ring or twisted out of plane.
RESUMO
A new polymorph of the diuretic chloro-thia-zide, 6-chloro-1,1-dioxo-2H-1,2,4-benzo-thia-zine-7-sulfonamide, C7H6ClN3O4S2, is described. Crystallized from basic aqueous solution, this monoclinic polymorph is found to be less thermodynamically favoured than the known triclinic polymorph and to feature only N-Hâ¯O type inter-molecular hydrogen bonds as opposed to the N-Hâ¯O and N-Hâ¯N type hydrogen bonds found in the P1 form.
RESUMO
Rubidium and cesium are the least studied naturally occurring s-block metals in organometallic chemistry but are in plentiful supply from a sustainability viewpoint as highlighted in the periodic table of natural elements published by the European Chemical Society. This underdevelopment reflects the phenomenal success of organometallic compounds of lithium, sodium, and potassium, but interest in heavier congeners has started to grow. Here, the synthesis and structures of rubidium and cesium bis(amido)alkyl magnesiates [(AM)MgN'2alkyl]∞, where N' is the simple heteroamide -N(SiMe3)(Dipp), and alkyl is nBu or CH2SiMe3, are reported. More stable than their nBu analogues, the reactivities of the CH2SiMe3 magnesiates toward 1,4-cyclohexadiene are revealed. Though both reactions produce target hydrido-magnesiates [(AM)MgN'2H]2 in crystalline form amenable to X-ray diffraction study, the cesium compound could only be formed in a trace quantity. These studies showed that the bulk of the -N(SiMe3)(Dipp) ligand was sufficient to restrict both compounds to dimeric structures. Bearing some resemblance to inverse crown complexes, each structure has [(AM)(N)(Mg)(N)]2 ring cores but differ in having no AM-N bonds, instead Rb and Cs complete the rings by engaging in multihapto interactions with Dipp π-clouds. Moreover, their hydride ions occupy µ3-(AM)2Mg environments, compared to µ2-Mg2 environments in inverse crowns.
RESUMO
The Cu-catalyzed azide-alkyne cycloaddition (CuAAC) reaction is used as a ligation tool throughout chemical and biological sciences. Despite the pervasiveness of CuAAC, there is a need to develop more efficient methods to form 1,4-triazole ligated products with low loadings of Cu. In this paper, we disclose a mechanistic model for the ynamine-azide (3 + 2) cycloadditions catalyzed by copper(II) acetate. Using multinuclear nuclear magnetic resonance spectroscopy, electron paramagnetic resonance spectroscopy, and high-performance liquid chromatography analyses, a dual catalytic cycle is identified. First, the formation of a diyne species via Glaser-Hay coupling of a terminal ynamine forms a Cu(I) species competent to catalyze an ynamine-azide (3 + 2) cycloaddition. Second, the benzimidazole unit of the ynamine structure has multiple roles: assisting C-H activation, Cu coordination, and the formation of a postreaction resting state Cu complex after completion of the (3 + 2) cycloaddition. Finally, reactivation of the Cu resting state complex is shown by the addition of isotopically labeled ynamine and azide substrates to form a labeled 1,4-triazole product. This work provides a mechanistic basis for the use of mixed valency binuclear catalytic Cu species in conjunction with Cu-coordinating alkynes to afford superior reactivity in CuAAC reactions. Additionally, these data show how the CuAAC reaction kinetics can be modulated by changes to the alkyne substrate, which then has a predictable effect on the reaction mechanism.
RESUMO
The larval fathead minnow, Pimephales promelas, 7-day subchronic survival and growth standard toxicity test method is commonly used for research and regulatory testing of effluents and compounds, including emerging contaminants such as Perfluorooctanesulfonic Acid (PFOS). Existing feeding guidelines for testing are described in multiple methods but are open to interpretation. The current study sought to determine the impact of feeding ration on P. promelas survival and biomass during a subchronic exposure to PFOS. The study was conducted in two phases: (1) a control experiment to determine the most significant feeding ration factors that maximize biomass, with consideration to laboratory logistics, and (2) application of down-selected feeding rations in a PFOS exposure to determine toxicity reference values. The control optimization study supported that feeding ration and feeding frequency were significant factors in fish biomass. In the subsequent PFOS study, fish were fed a high or low ration of Artemia twice daily, while exposed to 0.3 to 3.4 mg/L PFOS. Fish fed a high ration of Artemia had significantly (p < 0.05) greater biomass than fish fed a low ration in all exposure concentrations except 3.4 mg/L, where survival was low in both treatments. The feeding ration was not a significant factor on the survival endpoint for either treatment, but the PFOS concentration was (p < 0.0001) (high ration LC50 = 2.44 mg/L; low ration LC50 = 2.25 mg/L). These findings contribute to a better understanding of the impact feeding ration has in toxicity assessments and downstream regulatory decisions.
Assuntos
Ácidos Alcanossulfônicos , Cyprinidae , Fluorocarbonos , Larva , Poluentes Químicos da Água , Animais , Ácidos Alcanossulfônicos/toxicidade , Fluorocarbonos/toxicidade , Cyprinidae/fisiologia , Poluentes Químicos da Água/toxicidade , Larva/efeitos dos fármacos , Larva/crescimento & desenvolvimento , Testes de Toxicidade SubcrônicaRESUMO
Recently main group compounds have stepped into the territory of precious transition metal compounds with respect to utility in the homogeneous catalysis of fundamentally important organic transformations. Inspired by the need to promote more sustainability in chemistry because of their greater abundance in nature, this change of direction is surprising since main group metals generally do not possess the same breadth of reactivity as precious transition metals. Here, we introduce the dihydropyridylsodium compound, Na-1,2-tBu-DH(DMAP), and its monomeric variant [Na-1,2-tBu-DH(DMAP)]·Me6TREN, and demonstrate their effectiveness in transfer hydrogenation catalysis of the representative alkene 1,1-diphenylethylene to the alkane 1,1-diphenylethane using 1,4-cyclohexadiene as hydrogen source [DMAP = 4-dimethylaminopyridine; Me6TREN = tris(N,N-dimethyl-2-aminoethyl)amine]. Sodium is appealing because of its high abundance in the earth's crust and oceans, but organosodium compounds have been rarely used in homogeneous catalysis. The success of the dihydropyridylsodium compounds can be attributed to their high solubility and reactivity in organic solvents.
RESUMO
Molecular heterobimetallic hydride complexes of lanthanide (Ln) and main-group (MG) metals exhibit chemical properties unique from their monometallic counterparts and are highly reactive species, making their synthesis and isolation challenging. Herein, molecular Ln/Al heterobimetallic trihydrides [Ln(Tp)2(µ-H)2Al(H)(Nâ³)] [2-Ln; Ln = Y, Sm, Dy, Yb; Tp = hydrotris(1-pyrazolyl)borate; Nâ³ = N(SiMe3)2] have been synthesized by facile insertion of aminoalane [Me3N·AlH3] into the Ln-N amide bonds of [Ln(Tp)2(Nâ³)] (1-Ln). Thus, this is a simple synthetic strategy to access a range of Ln/Al hydrides. Reactivity studies demonstrate that 2-Ln is a heterobimetallic hydride, with evidence for the cooperative nature of 2-Ln shown by the catalytic amine-borane dehydrocoupling under ambient conditions in contrast to its monomeric counterparts.
RESUMO
Background: Multiple smart devices capable of automatically detecting atrial fibrillation (AF) based on single-lead electrocardiograms (SL-ECG) are presently available. The rate of inconclusive tracings by manufacturers' algorithms is currently too high to be clinically useful. Method: This is a prospective, observational study enrolling patients presenting to a cardiology service at a tertiary referral center. We assessed the clinical value of applying a smart device artificial intelligence (AI)-based algorithm for detecting AF from 4 commercially available smart devices (AliveCor KardiaMobile, Apple Watch 6, Fitbit Sense, and Samsung Galaxy Watch3). Patients underwent a nearly simultaneous 12-lead ECG and 4 smart device SL-ECGs. The novel AI algorithm (PulseAI, Belfast, United Kingdom) was compared with each manufacturer's algorithm. Results: We enrolled 206 patients (31% female, median age 64 years). AF was present in 60 patients (29%). Sensitivity and specificity for the detection of AF by the novel AI algorithm vs manufacturer algorithm were 88% vs 81% (P = .34) and 97% vs 77% (P < .001) for the AliveCor KardiaMobile, 86% vs 81% (P = .45) and 95% vs 83% (P < .001) for the Apple Watch 6, 91% vs 67% (P < .01) and 94% vs 82% (P < .001) for the Fitbit Sense, and 86% vs 82% (P = .63) and 94% vs 80% (P < .001) for the Samsung Galaxy Watch3, respectively. In addition, the proportion of SL-ECGs with an inconclusive diagnosis (1.2%) was significantly lower for all smart devices using the AI-based algorithm compared to manufacturer's algorithms (14%-17%), P < .001. Conclusion: A novel AI algorithm reduced the rate of inconclusive SL-ECG diagnosis massively while maintaining sensitivity and improving the specificity compared to the manufacturers' algorithms.
RESUMO
Background: The availability of portable and wearable electrocardiographic (ECG) devices has increased secondary to technological development. Single-lead ECG recordings have been shown to reliably detect and characterize cardiac rhythms such as atrial fibrillation. Acquisition of precordial electrodes for full 12-lead ECG reconstruction from bipolar recordings is complicated by the absence of a body ground/Wilson central terminal electrode. The extent of difference between standard precordial leads and those from a wearable bipolar ECG recorder has not been characterized. Objective: The purpose of this study was to characterize the precordial ECG lead set from sequential bipolar recordings from an ECG ring wearable device. Methods: In 70 patients who wore an ECG device on a right-hand finger, sequential precordial leads (CR1-CR6) were obtained along with chest electrodes (V1-V6). During acquisition of the modified precordial lead CR6, a full standardized 12-lead ECG capture was obtained. Signal quality was assessed using automated analysis software, and correlation values between the ring-derived ECG precordial leads and standard ECG leads were compared with regard to QRS duration, QT width, and RR interval. Results: High concordance in the morphologies of precordial ECG leads obtained in a standard fashion and those recorded through an ECG ring was observed. Morphologic alignment improved with increasing laterality of the precordial lead with chest to right arm ring recording (CR5, CR6) compared with anterior chest leads to right arm (CR1, CR2). Segmental measurements of QRS duration and QT segment were well aligned and of high correlation. Conclusion: Wearable ring-based ECG technology is capable of high-fidelity recordings of precordial leads for nonsimultaneous reconstruction of complete ECG sets. These recordings correlate highly with surface-obtained QRS and QT duration measurements and have significant implications for clinical applications. Uninterpretable tracings were primarily due to electrode noise from poor electrode contact.
RESUMO
The synthesis of multivariate metal-organic frameworks (MOFs) is a well-known method for increasing the complexity of porous frameworks. In these materials, the structural differences of the ligands used in the synthesis are sufficiently subtle that they can each occupy the same site in the framework. However, multivariate or ligand scrambling approaches are rarely used in the synthesis of porous metal-organic polyhedra (MOPs) - the molecular equivalent of MOFs - despite the potential to retain a unique intrinsic pore from the individual cage while varying the extrinsic porosity of the material. Herein we directly synthesise scrambled cages across two families of lantern-type MOPs and find contrasting effects on their gas sorption properties. In one family, the scrambling approach sees a gradual increase in the BET surface area with the maximum and minimum uptakes associated with the two pure homoleptic cages. In the other, the scrambled materials display improved surface areas with respect to both of the original, homoleptic cages. Through analysis of the gas sorption isotherms, we attribute this effect to the balance of micro- and mesoporosity within the materials, which varies as a result of the scrambling approach. The gas uptake of the materials presented here underscores the tunability of cages that springs from their combination of intrinsic, extrinsic, micro- and meso-porosities.
RESUMO
The structures of five ammonium salt forms of monosulfonated azo dyes, derivatives of 4-(2-phenyldiazen-1-yl)benzenesulfonate, with the general formula [NH4][O3S(C6H4)NN(C6H3)RR']·XH2O [R = OH, NH2 or N(C2H4OH)2; R' = H or OH] are presented. All form simple layered structures with alternating hydrophobic (organic) and hydrophilic (cation, solvent and polar groups) layers. To assess for isostructural behaviour of the ammonium cation with M+ ions, the packing of these structures is compared with literature examples. To aid this comparison, the corresponding structures of four potassium salt forms of the monosulfonated azo dyes are also presented herein. Of the five ammonium salts it is found that three have isostructural equivalents. In two cases this equivalent is a potassium salt form and in one case it is a rubidium salt form. The isostructurality of ion packing and of unit-cell symmetry and dimensions tolerates cases where the ammonium ions form somewhat different interaction types with coformer species than do the potassium or rubidium ions. No sodium salt forms are found to be isostructural with any ammonium equivalent. However, similarities in the anion packing within a single hydrophobic layer are found for a group that consists of the ammonium and rubidium salt forms of one azo anion species and the sodium and silver salt forms of a different azo species.
RESUMO
The C-aryl-tetrahydropyran motif is prevalent in nature in a number of natural products with biological activity; however, this challenging architecture still requires novel synthetic approaches. We demonstrate the application of a stereoselective Heck redox-relay strategy for the synthesis of functionalized 2,6-trans-tetrahydropyrans in excellent selectivity in a single step from an enantiopure dihydropyranyl alcohol, proceeding through a novel exo-cyclic migration. The strategy has also been applied to the total synthesis of a trans-epimer of the natural product centrolobine in excellent yield and stereoselectivity.
RESUMO
A widely utilised class of ligands in synthesis and catalysis, ß-diketiminate (BDI) or NacNac compounds were initially considered innocent in the sense that they remained intact in all their applications. That changed when the γ-C-H unit of their NCCCN backbone was found to engage in reactions with electrophiles. Here, we show that this special reactivity can be used advantageously to prepare tripodal modifications of the common NacNac ligand derived from 2,6-diisopropylphenyl-ß-methyldiketimine [NacNacH (Me, Dipp)]. Lithiation to give NacNacLi, followed by reactions with isocyanates, isothiocyanates and a carbodiimide, have afforded a series of tripodal NacNac variants having N,N,N,O; N,N,N,S; or N,N,N,N potential dentation sites, many of which have been crystallographically characterised. Distinct ligating modes of these new ligands have been elucidated through the crystal structures of their lithiated derivatives.
RESUMO
A prior multigenerational perfluorooctane sulfonic acid (PFOS) exposure investigation in zebrafish reported adverse effects at 0.734 µg/L, among the lowest aquatic effect levels for PFOS reported to date. The present three-generation PFOS exposure quantified survival, growth, reproduction, and vitellogenin (VTG; egg yolk protein) responses in zebrafish, incorporating experimental design and procedural improvements relative to the earlier study. Exposures targeting 0.1, 0.6, 3.2, 20, and 100 µg/L in parental (P) and first filial (F1) generations lasted for 180 days post fertilization (dpf) and the second filial generation (F2) through 16 dpf. Survival decreased significantly in P and F2 generation exposures, but not in F1, at the highest PFOS treatment (100 µg/L nominal, 94-205 µg/L, measured). Significant adverse effects on body weight and length were infrequent, of low magnitude, and occurred predominantly at the highest exposure treatment. Finally, PFOS had no significant effects on P or F1 egg production and survival or whole-body VTG levels in P or F1 male fish. Overall, the predominance and magnitude of adverse PFOS effects at <1 µg/L reported in prior research were largely nonrepeatable in the present study. In contrast, the present study indicated a threshold for ecologically relevant adverse effects in zebrafish at 117 µg/L (SE 8 µg/L, n = 10) for survival and 47 µg/L (SE 11 µg/L, n = 19) for all statistically significant negative effects observed. Environ Toxicol Chem 2024;43:115-131. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA.
Assuntos
Ácidos Alcanossulfônicos , Fluorocarbonos , Poluentes Químicos da Água , Humanos , Animais , Masculino , Peixe-Zebra/metabolismo , Reprodução , Ácidos Alcanossulfônicos/toxicidade , Ácidos Alcanossulfônicos/metabolismo , Fluorocarbonos/toxicidade , Fluorocarbonos/metabolismo , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/metabolismoRESUMO
Controlled release of active ingredients are important for drug delivery and more recently environmental applications including modulated dosing of chemical and biological controls. This study demonstrates the importance of investigating various material science factors that can influence the diffusion rates of alginate beads to improve and tune their performance for marine environmental applications. This investigation aimed to design a rational workflow to aid in leveraging alginate bead use as a carrier matrix for releasing a specific active agent into water. Experiments were conducted to focus on the narrow a large list of relevant material formulation parameters, which included chitosan molecular weight, chitosan concentration, calcium concentration, drop height, and bead size. Once the most relevant material preparation methods were screened, a more robust statistic Design of Experiments approach was performed and results determined the important (and unimportant) factors for increasing dye release kinetics in marine water. The process was further streamlined by narrowing the critical experimental factors to a three-level based on the prior analysis: chitosan MW, chitosan concentration, and bead size. Analysis of the collected data indicated that while chitosan MW had a negligible impact (Fstatistic = 0.22), bead size (Fstatistic = 60.33) significantly influenced the diffusion rates based on surface area. However, chitosan MW had minor effects where lower chitosan MW enabled higher product release rates. This case investigation was a novel application of the design of experiment approach towards environmental applications to understand differences in release rates to marine waters for the first time and the workflow provided also serve as the basis for researchers to optimize other environmental applications requiring optimization when it is unknown how a large number of formulation variables will impact performance in different environmental scenarios.
Assuntos
Quitosana , Quitosana/química , Alginatos/química , Cálcio , Água , Ácidos Hexurônicos/química , Ácido Glucurônico/químicaRESUMO
Tethered N-heterocyclic carbenes (NHCs) are an emerging class of ligand, as they feature all the desirable aspects of NHCs (ease of synthesis, high tunabilty) but also enable metal-ligand cooperativity when combined with Lewis acidic metal centres due to the donor-acceptor nature of the complexes formed. Herein we report a simple ethoxy-tethered NHC for the stabilisation of Al(III) hydrides, resulting in the unexpected formation of a bicyclic N-heterocyclic aminal (1). Compound 1 behaves as a metal hydride, capable of reducing benzophenone and carbodiimide to yield compounds 2 and 3, respectively. Furthermore, we show that 1 behaves as an efficient catalyst in the dehydrocoupling of amine-boranes due to the hemi-labile nature of the supporting ligand.
RESUMO
Light alkali metal (Li, Na, K) amides have a long history of synthetic utility, but heavier (Rb, Cs) congeners have barely been studied. This study reveals remarkable structurally complex outcomes of reacting AM(HMDS) (AM = Rb, Cs; HMDS = hexamethyldisilazide) with benzaldehyde and acetophenone. Though complicated, reactions give a diversity of eye-catching isolated products, an enolate with a hexagonal prismatic network, two dienolates with distinct extended ladder motifs, and two ß-imino-alkoxides comprising zig-zag chains of metal-oxygen bonds in infinite cages.
RESUMO
Cationic alkaline-earth complexes attract interest for their enhanced Lewis acidity and reactivity compared with their neutral counterparts. Synthetic protocols to these complexes generally utilize expensive specialized reagents in reactions generating multiple by-products. We have studied a simple ligand transfer approach to these complexes using (NacNac)MgR and ER3 (NacNac = ß-diketiminate anion; E = group 13 element; R = aryl/amido anion) which demonstrates high atom economy, opening up the ability to target these species in a more sustainable manner. The success of this methodology is dependent on the identity of the group 13 element with the heavier elements facilitating faster ligand exchange. Furthermore, while this reaction is successful with aromatic ligands such as phenyl and pyrrolyl, the secondary amide piperidide (pip) fails to transfer, which we attribute to the stronger 3-centre-4-electron dimerization interaction of Al2(pip)6.
RESUMO
Palladium salts and complexes were tested separately and in the presence of added ligands as potential sources of aryl radicals in ground-state coupling reactions of aryl halide with arenes under basic conditions (KOtBu). Our recently developed assay for aryl radicals was employed to test for aryl radicals. In this assay, aryl radicals derived from the test substrate, 1-iodo-2,6-dimethylbenzene 7, undergo base-promoted homolytic aromatic substitution (BHAS) with benzene to produce 2,6-dimethylbiphenyl 8 and biphenyl 9 in an approximately 1:4 ratio as well as m-xylene 10. The biphenyl arises from a diagnostic radical transfer reaction with the solvent benzene. Using substrate 7 with a range of Pd sources as potential initiators led to formation of 8, 9, and 10 in varying amounts. However, when any one of a range of diphosphinoferrocenes (e.g., dppf or dippf) or BINAP or the monophosphine, diphenylphosphinoferrocene, was added as a ligand to Pd(OAc)2, the ratio of [2,6-dimethylbiphenyl 8: biphenyl 9] moved decisively to that expected from the BHAS (radical) pathway. Further studies were conducted with dppf. When dppf was added to each of the other Pd sources, the ratio of coupled products was also diverted to that expected for radical BHAS chemistry. Deuterium isotope studies and radical trap experiments provide strong additional support for the involvement of aryl radicals. Accordingly, under these ground-state conditions, palladium sources, in the presence of defined ligands, convert aryl iodides to aryl radicals. A rationale is proposed for these observations.
RESUMO
The structures of four salt forms of dopamine are reported. These are dopamine [2-(3,4-dihydroxyphenyl)ethan-1-aminium] benzoate, C8H12NO2+·C7H5O2-, I, dopamine 4-nitrobenzoate, C8H12NO2+·C7H4NO4-, II, dopamine ethanedisulfonate, 2C8H12NO2+·C2H4O6S22-, III, and dopamine 4-hydroxybenzenesulfonate monohydrate, C8H12NO2+·C6H5O4S-·H2O, IV. In all four structures, the dopamine cation adopts an extended conformation. Intermolecular interaction motifs that are common in the salt forms of tyramine can be found in related dopamine structures, but hydrogen bonding in the dopamine structures appear to be more variable and less predictable than for tyramine. Packing analysis discovered three dopamine-containing groups of structures that can be described as isostructural with regards to the cation positions. Two of these groups contain both dopamine and tyramine species, and one of these is also highly variable in other ways too, containing anhydrous and hydrated forms, different anion types and ionized and neutral phenylethylamine species. As such, the group illustrates that packing behaviour can be robust and similar even where intermolecular interactions such as hydrogen bonds are very different.