Colloidal Quantum Dots as an Emerging Vast Platform and Versatile Sensitizer for Singlet Molecular Oxygen Generation.

Singlet molecular oxygen (1O2) has been reported in wide arrays of applications ranging from optoelectronic to photooxygenation reactions and therapy in biomedical proposals. It is also considered a major determinant of photodynamic therapy (PDT) efficacy. Since the direct excitation from the triplet ground state (3O2) of oxygen to the singlet excited state 1O2 is spin forbidden; therefore, a rational design and development of heterogeneous sensitizers is remarkably important for the efficient production of 1O2. For this purpose, quantum dots (QDs) have emerged as versatile candidates either by acting individually as sensitizers for 1O2 generation or by working in conjunction with other inorganic materials or organic sensitizers by providing them a vast platform. Thus, conjoining the photophysical properties of QDs with other materials, e.g., coupling/combining with other inorganic materials, doping with the transition metal ions or lanthanide ions, and conjugation with a molecular sensitizer provide the opportunity to achieve high-efficiency quantum yields of 1O2 which is not possible with either component separately. Hence, the current review has been focused on the recent advances made in the semiconductor QDs, perovskite QDs, and transition metal dichalcogenide QD-sensitized 1O2 generation in the context of ongoing and previously published research work (over the past eight years, from 2015 to 2023).

Insight into a pure spinel Co3O4 and boron, nitrogen, sulphur (BNS) tri-doped Co3O4-rGO nanocomposite for the electrocatalytic oxygen reduction reaction.

The intricate problems concerning energy require innovative solutions. Herein, we propose a smart composite nano system that can be used in a sustainable and dichotomous manner to resolve energy crises. The current study describes a new way to synthesize a pure spinel cobalt oxide (Co3O4) and boron (B), nitrogen (N), and sulfur (S) tri-doped Co3O4-reduced graphite oxide (rGO) nanocomposite (CBNS). A hydrothermal method has been used for the synthesis of these nanomaterials. The synthesized nanocomposite was characterized by UV-visible spectroscopy, X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), X-ray absorption spectroscopy (XAS), and transmission electron microscopy (TEM). The XRD results showed the formation of Co3O4 and B, N, S doped nanocomposite with high purity and crystallinity. XAS analysis elucidates the formation of spinel Co3O4 with tetrahedral and octahedral arrangement of cobalt ions. The peaks at 2.50 Å and 3.07 Å are due to the Co-Co bonding. The electrocatalytic oxygen reduction (ORR) was successfully implemented using these nanocomposites. The electrochemical study exhibits the better activity of the B, N, and S tri-doped Co3O4-rGO nanocomposite due to the mutual effect of B, N and S. The synthesized catalyst has maximum current density of 9.97 mA cm-2 with onset potential (Eonset) of 0.98 V in alkaline medium.

Strategy to Probe the Local Atomic Structure of Luminescent Rare Earth Complexes by X-ray Absorption Near-Edge Spectroscopy Simulation Using a Machine Learning-Based PyFitIt Approach.

Rare earth(III) ß-diketonates are highly remarkable luminophores in the visible spectral region among the rare earth compounds, owing to the efficient contribution from the 4f-4f intraconfigurational transitions. To get detailed structural insight into the RE3+ sites (RE = Eu, Gd, and Sm), X-ray absorption near-edge spectroscopy (XANES) can be very potent in probing the local chemical environment around the RE3+ ion. In this work, a PyFitIt machine learning approach was employed as a new strategy to simulate the Eu, Gd, and Sm L3-edge XANES and thereby determine the local atomic structure of the luminescence RE3+ ß-diketonate complexes, [Eu(tta)3(H2O)2], [C4mim][Eu(dbm)4], [Gd(tta)3(H2O)2], and [Sm(dbm)3(phen)] (tta, 3-thenoyltrifluoroacetonate; dbm, dibenzoylmethane; phen, phenanthroline; and C4mim, 1-butyl-3-methylimidazolium bromide). Continuous Cauchy wavelet transform validated the PyFitIt calculated XANES by visualizing very efficiently the coordination geometries, composed of O and O/N backscatterers around the RE3+ (RE = Eu and Gd) and Sm3+ ions, respectively, as a pinkish-red color map in the two-dimensional images of the corresponding complexes. Extended X-ray absorption fine structure fit in Artemis also corroborated the three-dimensional structures generated by PyFitIt XANES simulation for all the compounds. Though, relatively slightly higher bond distance values for the Sm3+ complex are due to the higher atomic radius of the Sm3+ ion when compared to the Eu3+ and Gd3+ complexes. Meanwhile, higher Debye-Waller factor (σ2) values for the [C4mim][Eu(dbm)4] when compared to the [Eu(tta)3(H2O)2] indicated the structure disorder, owing to the distortion in the local geometry. It is noteworthy that the optical properties, described mainly by the Ωλ (λ = 2 and 4) 4f-4f intensity parameters, are very sensitive to the local coordination environment around the Eu3+ ion. Thus, a close agreement between the experimental and theoretically calculated Ωλ parameter values confirmed that the PyFitIt calculated square antiprismatic structures are precisely similar to the real structures of the Eu3+ complexes.

Emergence of the first XAFS/XRF beamline in the Middle East: providing studies of elements and their atomic/electronic structure in pluridisciplinary research fields.

XAFS/XRF is a general-purpose absorption spectroscopy beamline at the Synchrotron-light for Experimental Science and Applications in the Middle East (SESAME), Jordan. Herein, its optical layout is presented along with its powerful capabilities in collecting absorption and fluorescence spectra within a wide energy range (4.7-30 keV). The beamline is equipped with a conventional fixed-exit double-crystal monochromator that allows the collection of an X-ray absorption spectrum within a few minutes in step-by-step mode. An on-the-fly scanning mode will be implemented shortly where the acquisition time will be reduced to less than a minute per scan. The full automation of the beamline allows performing successive measurements under different conditions. The different experimental setups and special features available to users are reported. Examples of XRF and XAFS measurements are presented, showing the performance of the beamline under different standard conditions.

Hydrothermal synthesis and characterization of transition metal (Mn/Fe/Cu) co-doped cerium oxide-based nano-additives for potential use in the reduction of exhaust emission from spark ignition engines.

The goal of this work was to synthesize new cerium oxide-based nano-additives to minimise emissions from spark ignition (SI) engines fueled with gasoline blends, such as carbon monoxide (CO), unburned hydrocarbons (HC) and oxides of nitrogen (NO x ). To investigate the effect of transition metal dopants on their respective catalytic oxidation activity, nano-sized CeO2 catalysts co-doped with Mn, Fe, Cu and Ag ions were successfully produced by a simple hydrothermal technique. The synthesis of nano-catalysts with cubic fluorite geometry was confirmed by XRD data. The addition of transition metal ions to the CeO2 lattice increased the concentration of structural defects like oxygen vacancies and Ce3+ ions, which are advantageous for the catalytic oxidation reaction, as also supported by XAFS and RAMAN analysis. Further, nano-gasoline fuel emission parameters are measured and compared to straight gasoline fuel. The results demonstrated that harmful exhaust pollutants such as CO, HC and NO x were significantly reduced. The high surface area, better redox characteristics and presence of additional oxygen vacancy sites or Ce3+ ions have been linked to the improved catalytic performance of the synthesized catalyst.

Mitigation of graphene oxide toxicity in C. elegans after chemical degradation with sodium hypochlorite.

Graphene oxide (GO) is a promising and strategic carbon-based nanomaterial for innovative and disruptive technologies. It is therefore essential to address its environmental health and safety aspects. In this work, we evaluated the chemical degradation of graphene oxide by sodium hypochlorite (NaClO, bleach water) and its consequences over toxicity, on the nematode Caenorhabditis elegans. The morphological, chemical, and structural properties of GO and its degraded product, termed NaClO-GO, were characterized, exploring an integrated approach. After the chemical degradation of GO at room temperature, its flake size was reduced from 156 to 29 nm, while NaClO-GO showed changes in UV-vis absorption, and an increase in the amount of oxygenated surface groups, which dramatically improved its colloidal stability in moderately hard reconstituted water (EPA medium). Acute and chronic exposure endpoints (survival, growth, fertility, and reproduction) were monitored to evaluate material toxicities. NaClO-GO presented lower toxicity at all endpoints. For example, an increase of over 100% in nematode survival was verified for the degraded material when compared to GO at 10 mg L-1. Additionally, enhanced dark-field hyperspectral microscopy confirmed the oral uptake of both materials by C. elegans. Finally, this work represents a new contribution toward a better understanding of the links between the transformation of graphene-based materials and nanotoxicity effects (mitigation), which is mandatory for the safety improvements that are required to maximize nanotechnological benefits to society.

Graphene oxide-silver nanoparticle hybrid material: an integrated nanosafety study in zebrafish embryos.

This work reports an integrated nanosafety study including the synthesis and characterization of the graphene oxide-silver nanoparticle hybrid material (GO-AgNPs) and its nano-ecotoxicity evaluation in the zebrafish embryo model. The influences of natural organic matter (NOM) and a chorion embryo membrane were considered in this study, looking towards more environmentally realistic scenarios and standardized nanotoxicity testing. The nanohybrid was successfully synthesized using the NaBH4 aqueous method, and AgNPs (~ 5.8 nm) were evenly distributed over the GO surface. GO-AgNPs showed a dose-response acute toxicity: the LC50 was 1.5 mg L-1 for chorionated embryos. The removal of chorion, however, increased this toxic effect by 50%. Furthermore, the presence of NOM mitigated mortality, and LC50 for GO-AgNPs changed respectively from 2.3 to 1.2 mg L-1 for chorionated and de-chorionated embryos. Raman spectroscopy confirmed the ingestion of GO by embryos; but without displaying acute toxicity up to 100 mg L-1, indicating that the silver drove toxicity down. Additionally, it was observed that silver nanoparticle dissolution has a minimal effect on these observed toxicity results. Finally, understanding the influence of chorion membranes and NOM is a critical step towards the standardization of testing for zebrafish embryo toxicity in safety assessments and regulatory issues.

Effect of the Albumin Corona on the Toxicity of Combined Graphene Oxide and Cadmium to Daphnia magna and Integration of the Datasets into the NanoCommons Knowledge Base.

In this work, we evaluated the effect of protein corona formation on graphene oxide (GO) mixture toxicity testing (i.e., co-exposure) using the Daphnia magna model and assessing acute toxicity determined as immobilisation. Cadmium (Cd2+) and bovine serum albumin (BSA) were selected as co-pollutant and protein model system, respectively. Albumin corona formation on GO dramatically increased its colloidal stability (ca. 60%) and Cd2+ adsorption capacity (ca. 4.5 times) in reconstituted water (Daphnia medium). The acute toxicity values (48 h-EC50) observed were 0.18 mg L-1 for Cd2+-only and 0.29 and 0.61 mg L-1 following co-exposure of Cd2+ with GO and BSA@GO materials, respectively, at a fixed non-toxic concentration of 1.0 mg L-1. After coronation of GO with BSA, a reduction in cadmium toxicity of 110 % and 238% was achieved when compared to bare GO and Cd2+-only, respectively. Integration of datasets associated with graphene-based materials, heavy metals and mixture toxicity is essential to enable re-use of the data and facilitate nanoinformatics approaches for design of safer nanomaterials for water quality monitoring and remediation technologies. Hence, all data from this work were annotated and integrated into the NanoCommons Knowledge Base, connecting the experimental data to nanoinformatics platforms under the FAIR data principles and making them interoperable with similar datasets.

Toxicity assessment of TiO2-MWCNT nanohybrid material with enhanced photocatalytic activity on Danio rerio (Zebrafish) embryos.

The increasing production and use of nanomaterials is causing serious concerns about their safety to human and environmental health. However, the applications of titanium dioxide nanoparticles (TiO2NP) and multiwalled carbon nanotubes (MWCNT) hybrids has grown considerably, due to their enhanced photocatalytic efficiency. To our knowledge, there are no reports available to the scientific community about their toxicity. In this work, we perform a toxicity assessment of TiO2NP and TiO2-MWCNT nanohybrid materials using Zebrafish embryos standardized 96 h early life stage assay, under different exposure conditions (with and without UV light exposure). After exposure the parameters assessed were acute toxicity, hatching rate, growth, yolk sac size, and sarcomere length. In addition, µ-probe X-ray fluorescence spectroscopy (µ-XRF) was employed to observe if nanoparticles were uptaken by zebrafish embryos and consequently accumulated in their organisms. Neither TiO2NP nor TiO2-MWCNT nanohybrids presented acute toxicity to the zebrafish embryos. Moreover, TiO2NP presents sublethal effects for total length (with and without UV light exposure) on the embryos. This work contributes to the understanding of the potential adverse effects of the emerging nanohybrid materials towards safe innovation approaches in nanotechnology.

Red-green emitting and superparamagnetic nanomarkers containing Fe3O4 functionalized with calixarene and rare earth complexes.

The design of bifunctional magnetic luminescent nanomaterials containing Fe3O4 functionalized with rare earth ion complexes of calixarene and ß-diketonate ligands is reported. Their preparation is accessible through a facile one-pot method. These novel Fe3O4@calix-Eu(TTA) (TTA = thenoyltrifluoroacetonate) and Fe3O4@calix-Tb(ACAC) (ACAC = acetylacetonate) magnetic luminescent nanomaterials show interesting superparamagnetic and photonic properties. The magnetic properties (M-H and ZFC/FC measurements) at temperatures of 5 and 300 K were explored to investigate the extent of coating and the crystallinity effect on the saturation magnetization values and blocking temperatures. Even though magnetite is a strong luminescence quencher, the coating of the Fe3O4 nanoparticles with synthetically functionalized rare earth complexes has overcome this difficulty. The intramolecular energy transfer from the T1 excited triplet states of TTA and ACAC ligands to the emitting levels of Eu(3+) and Tb(3+) in the nanomaterials and emission efficiencies are presented and discussed, as well as the structural conclusions from the values of the 4f-4f intensity parameters in the case of the Eu(3+) ion. These novel nanomaterials may act as the emitting layer for the red and green light for magnetic light-converting molecular devices (MLCMDs).