Development of a point-of-care colorimetric metabolomic sensor platform.

Metabolomics is the large-scale study of small molecule metabolites within a biological system. It has applications in measuring dietary intake, predicting heart disease risk, and diagnosing cancer. Metabolites are often measured using high-end analytical tools such as mass spectrometers or large spectrophotometers. However, due to their size, cost, and need for skilled operators, using such equipment at the bedside is not practical. To address this issue, we have developed a low-cost, portable, optical color sensor platform for metabolite detection. This platform includes LEDs, sensors, microcontrollers, a power source, and a Bluetooth chip enclosed within a 3D-printed light-tight case. We evaluated the color sensor's performance using both a range of dyed water samples as well as well-established colorimetric reactions for specific metabolite detection. The sensor accurately measured creatinine, L-carnitine, ascorbate, and succinate well within normal human urine levels with accuracy and sensitivity equal to or better than a standard laboratory spectrophotometer. Our color sensor offers a cost-effective, portable alternative for measuring metabolites via colorimetric assays, thereby enabling low-cost, point-of-care metabolite testing.

A gold nanoparticle-protein G electrochemical affinity biosensor for the detection of SARS-CoV-2 antibodies: a surface modification approach.

As COVID-19 waves continue to spread worldwide, demand for a portable, inexpensive and convenient biosensor to determine community immune/infection status is increasing. Here we describe an impedance-based affinity biosensor using Interdigitated Electrode (IDE) arrays to detect antibodies to SARS-CoV-2 in serum. We created the biosensor by functionalizing the IDEs' surface with abaculaovirus-expressed and purified Spike (S) protein to bind anti-SARS CoV-2antibodies. Gold nanoparticles (GNP) fused to protein G were used to probe for bound antibodies. An ELISA assay using horseradish peroxidase-protein G to probe for bound IgG confirmed that the purified S protein bound a commercial source of anti-SARS-CoV-2 antibodies specifically and bound anti-SARS-CoV-2 antibodies in COVID-19 positive serum. Then we demonstrated that our biosensor could detect anti-SARS-CoV-2 antibodies with 72% sensitivity in 2 h. Using GNP-protein G, the affinity biosensor had increased impedance changes with COVID-19positive serum and minimal or decreased impedance changes with negative serum. This demonstrated that our biosensor could discriminate between COVID-19 positive and negative sera, which were further improved using poly(vinyl alcohol)as a blocking agent.

An impedimetric biosensor for COVID-19 serology test and modification of sensor performance via dielectrophoresis force.

Coronavirus disease 2019 (COVID-19) has caused significant global morbidity and mortality. The serology test that detects antibodies against the disease causative agent, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has often neglected value in supporting immunization policies and therapeutic decision-making. The ELISA-based antibody test is time-consuming and bulky. This work described a gold micro-interdigitated electrodes (IDE) biosensor for COVID antibody detection based on Electrochemical Impedance Spectroscopy (EIS) responses. The IDE architecture allows easy surface modification with the viral structure protein, Spike (S) protein, in the gap of the electrode digits to selectively capture anti-S antibodies in buffer solutions or human sera. Two strategies were employed to resolve the low sensitivity issue of non-faradic impedimetric sensors and the sensor fouling phenomenon when using the serum. One uses secondary antibody-gold nanoparticle (AuNP) conjugates to further distinguish anti-S antibodies from the non-specific binding and obtain a more significant impedance change. The second strategy consists of increasing the concentration of target antibodies in the gap of IDEs by inducing an AC electrokinetic effect such as dielectrophoresis (DEP). AuNP and DEP methods reached a limit of detection of 200 ng/mL and 2 µg/mL, respectively using purified antibodies in buffer, while the DEP method achieved a faster testing time of only 30 min. Both strategies could qualitatively distinguish COVID-19 antibody-positive and -negative sera. Our work, especially the impedimetric detection of COVID-19 antibodies under the assistance of the DEP force presents a promising path toward rapid, point-of-care solutions for COVID-19 serology tests.

A Simple and Convenient Synthesis of Unlabeled and 13C-Labeled 3-(3-Hydroxyphenyl)-3-Hydroxypropionic Acid and Its Quantification in Human Urine Samples.

An improved method to synthesize the highly abundant and biomedically important urinary metabolite 3-(3-hydroxyphenyl)-3-hydroxypropionic acid (HPHPA) is reported. The modified protocol is based on an indium-mediated sonochemical Reformatsky reaction. The synthesis is a simple two-step route as opposed to a complex four-step route previously reported in the literature that requires specialized equipment, flammable materials, and high-pressure reaction vessels. The described procedure also provides an expedient route to prepare a 13C isotopically labeled HPHPA that can be used as a standard for quantitative LC-MS analysis. This report also illustrates how the synthesized metabolite standard was used to detect and accurately quantify its presence in human urine samples using both NMR and LC-MS techniques.

Heavy metals determination in water and food samples after preconcentration by a new nanoporous adsorbent.

In this work, SBA-15 mesoporous silica has been chemically functionalized with guanidin groups. The resulting material has been characterised and employed as solid phase extractant for preconcentration of Pb(2+), Cu(2+), Zn(2+) and Cd(2+) ions. The ions were identified by flame atomic absorption spectrometry (FAAS). The enrichment factor of the proposed method was 100 and detection limits were found to be 4.5, 0.6, 0.2 and 0.5 ng mL(-1) for Pb(2+), Cu(2+), Zn(2+) and Cd(2+) respectively. The time and the optimum amount of the sorbent, pH and minimum amount of acid for stripping and break through volume were investigated. The maximum capacity the adsorbent was found to be 89.1 (±1.7) µg, 57.2 (±1.6) µg, 26.8 (±1.6) µg and 36.0 (±0.6) µg of Pb(2+), Cu(2+), Zn(2+) and Cd(2+) per mg functionalized SBA-15, respectively. Guanidin functionalized SBA-15 was successfully applied as a new solid extractant for the simultaneous preconcentration of Pb(2+), Cu(2+), Zn(2+) and Cd(2+) ions in water and food samples.