"Custom" Plate in a Day-Accurate Predictive Hole Fabrication Using Point-of-Care 3-Dimensional Printing.

PURPOSE: In computer surgical planned (CSP) fibular reconstructions of the mandible, custom plates facilitate accurate and efficient transfer of the digital plan intraoperatively by a way of predrilled fixation holes. Stock plates are more easily accessible and are more economical but typically preclude the utilization of these predictive holes. The purpose of this article is to describe an accurate and economical alternative to custom plates, while still having the ability to create predictive holes for plate alignment and execution of a digital surgical plan. METHODS: An in vitro accuracy study was performed on a point-of-care resin-printed predictive hole guide termed "prebent plate analog" (PPA). Twenty stock 2.0 reconstruction plates prebent against a 3-dimensional printed mandibular model reconstructed with a 2-piece fibula were used to fabricate 20 PPAs. The proximal and distal 4 holes of each prebent plate and corresponding PPA were assessed using a heat map overlay, measuring difference in millimeters between matching points of the predictive hole segments. The median distance from the points of reference in the PPA versus the prebent plate was calculated for each predictive hole position in addition to the average error of the PPA to the stock plate. RESULTS: Eighteen PPAs were used for statistical analysis; 2 were damaged in transport. The mean error between the body (-0.265) and condylar segments (-0.116 mm) and mean difference in error between the proximal predictive holes (-0.124 mm) and distal predictive holes (-0.215 mm) on the PPA were not statistically different (P = .061, P = .314 general estimating equation regression, respectively). The mean error across the PPA predictive holes and corresponding holes of the prebent plates was -0.194 mm (P < .001, general estimating equation regression). CONCLUSIONS: The PPA is a precise and accurate analog that faithfully replicates the position of proximal and distal components of a prebent stock plate, thereby allowing for predictive hole placement in lieu of a custom plate in fibula mandibular reconstruction cases.

Updates in Management of Craniomaxillofacial Gunshot Wounds and Reconstruction of the Mandible.

This article includes updates in the management of mandibular trauma and reconstruction as they relate to maxillomandibular fixation screws, custom hardware, virtual surgical planning, and protocols for use of computer-aided surgery and navigation when managing composite defects from gunshot injuries to the face.

Challenges With the Jaw in a Day Technique.

PURPOSE: The Jaw in a Day (JIAD) procedure allows for complete primary reconstruction of bone and teeth during the same operation as tumor resection. We reviewed 12 cases, the largest published case series of the JIAD procedure, and discussed both the prosthodontic and surgical considerations. MATERIALS AND METHODS: A multi-institutional retrospective chart review was completed to identify patients undergoing the JIAD procedure. Patients with a minimum of 6 months' follow-up were included. Variables included skeletal relationship, dental Angle classification changes, postoperative diet, prosthesis complications, flap failure, osseointegration of dental implants, hardware complications, infection, intelligible speech, and patients' subjective satisfaction with facial and dental esthetics. RESULTS: The sample included 12 patients (8 male and 4 female patients) with a mean age of 38 years (range, 15 to 75 years) and an average follow-up period of 19 months (range, 7 to 42 months). Patients underwent the JIAD procedure at the same time as resection of an ameloblastoma (mandibular in 9 and maxillary in 1) or odontogenic myxoma (mandibular in 1 and maxillary in 1). Nine patients' Angle classification remained unchanged after the procedure, with 3 patients showing correction from dental Class III to Class I. On average, 4 implants (range, 2 to 6 implants) were placed. Hybrid or splinted crown prostheses replaced, on average, 8 teeth (range, 3 to 12 teeth) with no prosthetic fractures. All patients had viable fibular flaps, absence of infection, and completely intelligible speech. All but 1 patient had subjective satisfaction with facial and dental esthetics. Complications included plate fracture with fibrous union (1), premature contacts requiring occlusal equilibration (2), implant loss (1), delayed wound healing (1), heterotopic bone formation along the pedicle (1), and dissatisfaction with chin symmetry (1). CONCLUSIONS: The JIAD technique predictably reconstructs bone and teeth in a single operation. The tools and services streamlining this protocol are now widely available. However, there are still several challenges with this protocol that surgeons and patients must overcome. Further study and refinements are necessary to address these.

The Radial Forearm Flap: A Technique Modification for Oral Cavity Composite Defects Involving a Marginal Mandibulectomy.

The radial forearm flap is a versatile reconstructive option for oral cavity defects with highly reliable success rates. We encountered more than one flap compromise when we used a radial forearm flap to reconstruct the soft tissue and provide coverage over the mandible, after a marginal mandibulectomy. From this observation, we modified our technique for radial forearm harvest and inset to avoid placing the pedicle in compression against the mandible. The purpose of this article is to present the cases that led to this observation, and present the technique modification in design and execution that we have used.

The Biaxial Double-Barrel Fibula Flap-A Simplified Technique for Fibula Maxillary Reconstruction.

PURPOSE: Previously described techniques for microvascular fibula reconstruction of Brown Class II to IV maxillectomy defects are complex, require multiple osteotomies, result in a short pedicle, and inadequately reconstruct the dental alveolus in preparation for endosseous implants. This report describes a simplified technique for Brown Class II to IV defects that re-creates facial support, allows for dental reconstruction with appropriately positioned implants, and maintains adequate pedicle length. MATERIALS AND METHODS: A retrospective chart review was performed of all patients with Brown Class II to IV maxillectomy defects immediately reconstructed with a biaxial double-barrel fibula flap technique. The reconstructive surgeon evaluated each patient at least 1 month after reconstruction for enophthalmos, facial symmetry, nasal patency, satisfactory jaw position, deglutition, intelligible speech, and intraoperative need for vein grafting. RESULTS: The sample was composed of 6 patients (mean age, 54 yr; range, 33 to 78 yr; 67% women) who underwent reconstruction with the biaxial double-barrel fibula flap technique for Brown Class II to IV defects. None of these patients required vein grafting. None of these patients had flap failure. Diagnoses for these patients were a hybrid odontogenic tumor (n = 1), squamous cell carcinoma (n = 3), adenoid cystic carcinoma (n = 1), and sinonasal melanoma (n = 1). All 6 patients had excellent facial contour and malar projection, regular oral intake, 100% intelligible speech, and a new maxillary skeletal Class I relation without need for intraoperative vein grafting. One patient developed enophthalmos related to inferior rectus sacrifice and removal of orbital fat. Complications included development of nasal synechia and occlusion of the maxillary sinus ostium (n = 1). CONCLUSIONS: The biaxial double-barrel fibula flap technique achieves the goals of providing adequate facial support and an alveolar segment amenable to implant dentistry. It allows for intelligible speech, deglutition, orbital support, and separation of the oronasal, orbital, and sinus cavities. In addition, it minimizes the need for vein grafting.

Use of Intraoperative Computed Tomography in Craniomaxillofacial Trauma Surgery.

PURPOSE: The use of technology to aid in assessment, planning, and management of complex craniomaxillofacial injuries is increasingly common. Preoperative computed tomography (CT) evaluation is considered the standard of care, and intraoperative imaging is becoming increasingly accessible. Limited data exist regarding the implication of intraoperative CT on decision making in the management of all sites of facial fractures. The purposes of this study were to characterize the use of an intraoperative CT scanner for craniomaxillofacial surgery within our institution, to quantify the effect of intraoperative CT on surgical decision making, and to attempt to provide guidance on when to use this technology. PATIENTS AND METHODS: This retrospective case series characterizes the use of an intraoperative CT scanner for craniomaxillofacial trauma surgery at a level 1 trauma center in Portland, Oregon, from February 2011 to September 2016. We evaluated the following variables: the number of intraoperative CT scans performed for craniomaxillofacial surgery including the number of scans for each patient, the number of scans for each operative visit, the CT-directed revision rate (overall and for specific preoperative diagnoses), and the indication for imaging. This information was evaluated to provide guidance on appropriate use of an intraoperative scanner. RESULTS: A total of 161 patients were identified to have intraoperative facial CT scans from February 2011 to September 20, 2016, at Legacy Emanuel Medical Center. A total of 212 intraoperative facial CT scans were performed across 168 separate operations. The overall CT-directed revision rate was 28%. CT-directed revision rates for fracture subsites are as follows: orbital, 31%; zygomaticomaxillary complex, 24%; Le Fort I, 8%; Le Fort II and III, 23%; naso-orbital-ethmoidal, 23%; mandible, 13%; and frontal sinus, 0%. No CT-directed revisions were performed during removal of hardware, during placement of craniofacial implants, or in temporomandibular joint replacement surgery. CONCLUSIONS: If available, intraoperative CT should be routinely considered in the operative management of orbital fractures and pan-facial fractures, as well as complex zygomaticomaxillary complex, Le Fort II and III, and naso-orbital-ethmoidal fractures. Consideration also should be given to the use of intraoperative CT in cases of complex mandible fractures involving severe comminution or the condylar region. Intraoperative CT should not be routinely used for the management of Le Fort I fractures or frontal sinus fractures.

Functional Anatomic Computer Engineered Surgery Protocol for the Management of Self-Inflicted Gunshot Wounds to the Maxillofacial Skeleton.

PURPOSE: Virtual surgical planning (VSP) is an indispensable aid in craniomaxillofacial reconstruction, yet no protocol is established in facial gunshot wounds. We review our experience with computer-aided reconstruction of self-inflicted facial gunshot wounds (SIGSW'S) and propose a protocol for the staged repair. METHODS: A retrospective case series enrolling patients with SIGSW's managed with the Functional Anatomic Computer Engineered Surgical protocol (FACES) was implemented. Subjects were evaluated at least one month postoperatively. Outcome variables were jaw position, facial projection, oro-nasal communication, lip competence, feeding tube and tracheostomy dependence, descriptive statistics were computed. The FACES protocol implemented during the initial hospitalization is as follows 1) damage control; 2) selective debridement; 3) VSP reconstruction back converted into navigation software 4) navigation assisted midfacial skeletal reconstruction; 5) computer aided oro-mandibular reconstruction with or without microvascular free flaps using custom cutting guides/hardware; 6) navigation assisted, computer aided palatomaxillary reconstruction with or without microvascular free flaps using cutting guides/hardware; 7) navigation assisted reconstruction of the internal orbit; 8) and confirmation of accurate reconstruction using intraoperative CT. RESULTS: The sample was composed of 10 patients, mean age of 43 years (range, 28 - 62 years, 70% M), 100% with SIGSW's to the submental/submandibular region. All had satisfactory facial projection (n=10), nine had satisfactory jaw position, were decannulated by one month's follow up and were feeding tube independent (90%). All traumatic oro-antral communications were closed (n=8, 7 surgical, 1 obturator), seven had adequate lip competence (70%). Complications included fibula malunion (n=1), plate exposure (n=2) infection (n=2), intracranial abscess (n=1) and microstomia (n=2). CONCLUSION: Computer-aided surgery is an indispensable tool in the reconstruction of SIGSW's. Successfully implemented, it proved to be a useful adjunct for: the restoration of orbital volume, facial projection and symmetry; the inset of composite tissue, and the facilitation of dental implant supported prosthetic rehabilitation.

Necrotizing Lip Infection Causing Septic Thrombophlebitis of the Neck: A Rare Variant of Lemierre Syndrome.

Lemierre syndrome is an uncommon condition in which internal jugular vein thrombosis presents after recent oropharyngeal infection. Frequently, this is accompanied by septic emboli. This report outlines a variant of this disease process, with septic thrombophlebitis of the neck associated with a necrotizing skin infection of the lower lip and chin. A 25-year-old man with lower lip and chin swelling, initially managed with intravenous antibiotics, progressed to the development of a left facial vein thrombus, septic emboli to the lungs, and a necrotizing lower lip and chin infection that was managed with debridement, thrombectomy, and prolonged hemodynamic and pulmonary support. A necrotizing skin infection with thrombus of the jugular system and septic emboli is a very rare variant of Lemierre syndrome. Early recognition of an infection with septic emboli and/or necrotizing pathobiological findings allows for prompt antibiotic and surgical therapy, minimizing the mortality of these potentially lethal infections.

Updates in Management of Craniomaxillofacial Gunshot Wounds and Reconstruction of the Mandible.

This article includes updates in the management of mandibular trauma and reconstruction as they relate to maxillomandibular fixation screws, custom hardware, virtual surgical planning, and protocols for use of computer-aided surgery and navigation when managing composite defects from gunshot injuries to the face.