Reference Electrode Types for Zero-Gap CO2 Electrolyzers: Benefits and Limitations.

Integrated reference electrodes allow to deconvolute voltage contributions of anode and cathode and contribute to a better understanding of CO2 electrolyzers. However, in zero-gap cell configurations, this integration can be challenging and obtaining error-free data with such a setup is a non-trivial task. This study compares five different methods to integrate a reference electrode into an alkaline zero-gap CO2 electrolysis cell. Sources of error and measures to circumvent them are investigated and finite-element simulation is used to gain a better understanding of observed effects. Placing a reference electrode into the inactive area of the cell is found to be a reliable method, as long as the placement of electrodes is sufficiently controlled. Sandwiching a wire quasi-reference electrode between two membranes is especially useful for electrochemical impedance spectroscopy; however, it can affect the overall cell performance. Contacting the catalyst layer from the backside with a salt-bridge is promising for localized measurements if sufficient reproducibility can be ensured.

In Situ Performance Monitoring of Electrochemical Oxygen and Hydrogen Peroxide Sensors in an Additively Manufactured Modular Microreactor.

Miniaturized and microstructured reactors in process engineering are essential for a more decentralized, flexible, sustainable, and resilient chemical production. Modern, additive manufacturing methods for metals enable complex reactor-geometries, increased functionality, and faster design iterations, a clear advantage over classical subtractive machining and polymer-based approaches. Integrated microsensors allow online, in situ process monitoring to optimize processes like the direct synthesis of hydrogen peroxide. We developed a modular tube-in-tube membrane reactor fabricated from stainless steel via 3D printing by laser powder bed fusion of metals (PBF-LB/M). The reactor concept enables the spatially separated dosage and resaturation of two gaseous reactants across a membrane into a liquid process medium. Uniquely, we integrated platinum-based electrochemical sensors for the online detection of analytes to reveal the dynamics inside the reactor. An advanced chronoamperometric protocol combined the simultaneous concentration measurement of hydrogen peroxide and oxygen with monitoring of the sensor performance and self-calibration in long-term use. We demonstrated the highly linear and sensitive monitoring of hydrogen peroxide and dissolved oxygen entering the liquid phase through the membrane. Our measurements delivered important real-time insights into the dynamics of the concentrations in the reactor, highlighting the power of electrochemical sensors applied in process engineering. We demonstrated the stable continuous measurement over 1 week and estimated the sensor lifetime for months in the acidic process medium. Our approach combines electrochemical sensors for process monitoring with advanced, additively manufactured stainless steel membrane microreactors, supporting the power of sensor-equipped microreactors as contributors to the paradigm change in process engineering and toward a greener chemistry.

Electrochemical Methods in the Cloud: FreiStat, an IoT-Enabled Embedded Potentiostat.

Embedded potentiostats enable electrochemical measurements in the Internet-of-Things (IoT) or other decentralized applications, such as remote environmental monitoring, electrochemical energy systems, and biomedical point-of-care applications. We report on Freiburg's Potentiostat (FreiStat) based on the AD5941 potentiostat circuit from Analog Devices, together with custom firmware, as the key to precise and advanced electrochemical methods. We demonstrated its analytical performance by various cyclic voltammetry measurements, advanced techniques such as differential pulse voltammetry, and a lactate biosensor measurement with currents in the nA range and a resolution of 54 pA. The FreiStat yielded analytical results comparable to benchtop devices and outperformed current commercial embedded potentiostats at significantly lower cost, smaller size, and lower power consumption. Decentralized corrosion analysis by a Tafel plot using the IBM Cloud showed its applicability in a typical IoT scenario. The developed open-source software framework facilitates the integration of electrochemical instrumentation into applications utilizing machine learning and other artificial intelligence. Together with the affordable and highly capable embedded potentiostat, our approach can leverage analytical chemistry toward increasingly important, more widespread and decentralized applications.

Advanced electrochemical potential monitoring for improved understanding of electrical neurostimulation protocols.

Objective.Current-controlled neurostimulation is increasingly used in the clinical treatment of neurological disorders and widely applied in neural prostheses such as cochlear implants. Despite its importance, time-dependent potential traces of electrodes during microsecond-scale current pulses, especially with respect to a reference electrode (RE), are not precisely understood. However, this knowledge is critical to predict contributions of chemical reactions at the electrodes, and ultimately electrode stability, biocompatibility, and stimulation safety and efficacy.Approach.We assessed the electrochemistry of neurostimulation protocolsin vitrowith Pt microelectrodes from millisecond (classical electroanalysis) to microsecond (neurostimulation) timescales. We developed a dual-channel instrumentation amplifier to include a RE in neurostimulation setups. Uniquely, we combined potential measurements with potentiostatic prepolarization to control and investigate the surface status, which is not possible in typical stimulation setups.Main results.We thoroughly validated the instrumentation and highlighted the importance of monitoring individual electrochemical electrode potentials in different configurations of neurostimulation. We investigated electrode processes such as oxide formation and oxygen reduction by chronopotentiometry, bridging the gap between milli- and microsecond timescales. Our results demonstrate how much impact on potential traces the electrode's initial surface state and electrochemical surface processes have, even on a microsecond scale.Significance.Our unique use of preconditioning in combination with stimulation reveals that interpreting potential traces with respect to electrode processes is misleading without rigorous control of the electrode's surface state. Especiallyin vivo, where the microenvironment is unknown, simply measuring the voltage between two electrodes cannot accurately reflect the electrode's state and processes. Potential boundaries determine charge transfer, corrosion, and alterations of the electrode/tissue interface such as pH and oxygenation, particularly in long-termin vivouse. Our findings are relevant for all use-cases of constant-current stimulation, strongly advocating for electrochemicalin situinvestigations in many applications like the development of new electrode materials and stimulation methods.

Bioprinting-based automated deposition of single cancer cell spheroids into oxygen sensor microelectrode wells.

Three-dimensional (3D) cell agglomerates, such as microtissues, organoids, and spheroids, become increasingly relevant in biomedicine. They can provide in vitro models that recapitulate functions of the original tissue in the body and have applications in cancer research. For example, they are widely used in organ-on-chip systems. Microsensors can provide essential real-time information on cell metabolism as well as the reliability and quality of culture conditions. The combination of sensors and 3D cell cultures, especially single spheroids, is challenging in terms of reproducible formation, manipulation, and access to spheroids, precise positioning near sensors, and high cell-to-volume ratios to obtain meaningful biosignals in the most parallel approach possible. To overcome this challenge, we combined state-of-the-art bioprinting techniques to automatically print tumour spheroids directly into microwells of a chip-based electrochemical oxygen sensor array. We demonstrated highly accurate and reproducible spheroid formation (diameter of approx. 200 µm) and a spheroid deposition precision of 25 µm within a volume of 22 nl per droplet. Microstructures and hydrogel-coated microwells allowed the placement of single MCF-7 breast cancer spheroids close to the sensor electrodes. The microelectrode wells were sealed for oxygen measurements within a 55 nl volume for fast concentration changes. Accurate and stable amperometric oxygen sensor performance was demonstrated from atmospheric to anoxic regions. Cellular respiration rates from single tumour spheroids in the range of 450-850 fmol min-1 were determined, and alterations of cell metabolism upon drug exposure were shown. Our results uniquely combine bioprinting with 3D cell culture monitoring and demonstrate the much-needed effort for facilitation, parallelization, sensor integration, and drug delivery in 3D cell culture and organ-on-chip experiments. The workflow has a high degree of automation and potential for scalability. In order to achieve greater flexibility in the automation of spheroid formation and trapping, we employed a method based on drop-on-demand liquid handling systems, instead of the typical on-chip approach commonly used in microfluidics. Its relevance ranges from fundamental metabolic research over standardization of cell culture experiments and toxicological studies, to personalized medicine, e.g. patient-specific chemotherapy.

In situ stability monitoring of platinum thin-film electrodes for neural interfaces in the presence of proteins.

The long-term stability of platinum electrodes is a key factor that determines the life-time of biomedical devices, such as implanted neural interfaces like brain stimulation or recording electrodes, cochlear implants, and biosensors. The downsizing of such devices relies on the usage of microfabricated thin-film electrodes. In order to determine and investigate the causal degradation processes for platinum electrodes, it is essential to use potential-controlled experiments, which allow selectable polarization of the electrode without exceeding the water stability window boundaries. Therefore, the surface processes and redox reactions occurring at the electrode are known at all times. In this study, we present the continuous in situ monitoring of platinum-based thin-film electrodes along their complete life cycle in neutral pH with and without the presence of proteins. The usage of chronoamperometry for electrode aging, monitoring of surface processes and the tracking of analyte redox processes, together with cyclic voltammetry to determine the complete amount of surface charge, allows a reliable quantification of fundamental degradation processes. We found that platinum dissolution is primarily driven by the formation and removal of Pt oxide. Despite the significantly lowered charge transfer, the presence of proteins did not prevent material loss or increase electrode lifetime. These results should be considered when interpreting results from current-controlled methods as typically used for neural interfaces. Clinical Relevance- All clinically relevant applications of microelectrodes, ranging from cell culture over diagnostics to in vivo use, involve the presence of proteins. Detailed and fundamental insight into electrode stability in the presence of proteins is therefore essential for successful clinical translation of neural interface technologies.

Electrochemical microelectrode degradation monitoring:in situinvestigation of platinum corrosion at neutral pH.

Objective. The stability of platinum and other noble metal electrodes is critical for neural implants, electrochemical sensors, and energy sources. Beyond the acidic or alkaline environment found in most electrochemical studies, the investigation of electrode corrosion in neutral pH and chloride containing electrolytes is essential, particularly regarding the long-term stability of neural interfaces, such as brain stimulation electrodes or cochlear implants. In addition, the increased use of microfabricated devices demands the investigation of thin-film electrode stability in combination with electrode performance.Approach. We developed a procedure of electrochemical methods for continuous tracking of electrode degradationin situover the complete life cycle of platinum thin-film microelectrodes in a unique combination with simultaneous chemical sensing. We used chronoamperometry and cyclic voltammetry to measure electrode surface and analyte redox processes, together with accelerated electrochemical degradation.Main results.We compared degradation between thin-film microelectrodes and bulk electrodes, neutral to acidic pH, different pulsing schemes, and the presence of the redox active species oxygen and hydrogen peroxide. Results were confirmed by electrochemical impedance spectroscopy, as well as mechanical profilometry and microscopy to determine material changes on a nanometer scale. We found that electrode degradation is mainly driven by repeated formation and removal of the platinum surface oxide, also within the electrochemical stability window of water. There was no considerable difference between thin-film micro- and macroscopic bulk electrodes or in the presence of reactive species, whereas acidic pH or extending the potential window led to increased degradation.Significance.Our results provide valuable fundamental information on platinum microelectrode degradation under conditions found in biomedical applications. For the first time, we employed a unified method to report quantitative data on electrode degradation up to a defined endpoint. Our method is a widely applicable framework for comparative long-term studies of electrode micro-/nanomaterial, sensor and neural interface stability.

Microfluidic organ-on-chip system for multi-analyte monitoring of metabolites in 3D cell cultures.

Three-dimensional cell cultures using patient-derived stem cells are essential in vitro models for a more efficient and individualized cancer therapy. Currently, culture conditions and metabolite concentrations, especially hypoxia, are often not accessible continuously and in situ within microphysiological systems. However, understanding and standardizing the cellular microenvironment are the key to successful in vitro models. We developed a microfluidic organ-on-chip platform for matrix-based, heterogeneous 3D cultures with fully integrated electrochemical chemo- and biosensor arrays for the energy metabolites oxygen, lactate, and glucose. Advanced microstructures allow straightforward cell matrix integration with standard laboratory equipment, compartmentalization, and microfluidic access. Single, patient-derived, triple-negative breast cancer stem cells develop into tumour organoids in a heterogeneous spheroid culture on-chip. Our system allows unprecedented control of culture conditions, including hypoxia, and simultaneous verification by integrated sensors. Beyond previous works, our results demonstrate precise and reproducible on-chip multi-analyte metabolite monitoring under dynamic conditions from a matrix-based culture over more than one week. Responses to alterations in culture conditions and cancer drug exposure, such as metabolite consumption and production rates, could be accessed quantitatively and in real-time, in contrast to endpoint analyses. Our approach highlights the importance of continuous, in situ metabolite monitoring in 3D cell cultures regarding the standardization and control of culture conditions, and drug screening in cancer research. Overall, the results underline the potential of microsensors in organ-on-chip systems for successful application, e.g. in personalized medicine.

Standard cochlear implants as electrochemical sensors: Intracochlear oxygen measurements in vivo.

Cochlear implants are the most successful neural prostheses worldwide and routinely restore sensorineural hearing loss by direct electrical stimulation of the auditory nerve. Enhancing this standard implant by chemical sensor functionality opens up new possibilities, ranging from access to the biochemical microenvironment of the implanted electrode array to the long-term study of the electrode status. We developed an electrochemical method to turn the platinum stimulation microelectrodes of cochlear implants into electrochemical sensors. The electrodes showed excellent and stable chemical sensor properties, as demonstrated by in vitro characterizations with combined amperometric and active potentiometric dissolved oxygen and hydrogen peroxide measurements. Linear, stable and highly reproducible sensor responses within the relevant concentration ranges with negligible offset were shown. This approach was successfully applied in vivo in an animal model. Intracochlear oxygen dynamics in rats upon breathing pure oxygen were reproducibly and precisely measured in real-time from the perilymph. At the same time, correct implant placement and its functionality was verified by measurements of electrically evoked auditory brainstem responses with clearly distinguishable peaks. Acute measurements indicated no adverse influence of electrical stimulation on electrochemical measurements and vice versa. Our work is ground-breaking towards advanced implant functionality, future implant lifetime monitoring, and implant-life-long in situ investigation of electrode degradation in cochlear implant patients.

Electrochemical methods for neural interface electrodes.

Objective. Neural interfaces often rely on charge transfer processes between electrodes and the tissue or electrolyte. Electrochemical processes are at the core of electrode function and, therefore, the key to neural interface stability, electrode performance characterization, and utilization of electrodes as chemical sensors. Electrochemical techniques offer a variety of options to investigate the charge transfer and electrocatalytic properties of electrodes.Approach. In this tutorial, we present various experiments to illustrate the power of electrochemical methods, serve as a reference and guideline, and stimulate deeper understanding of the subject.Main results.As a basis for the following experiments, we discuss the platinum cyclic voltammogram and focus on understanding surface processes and roughness determination. We highlight the importance of appropriate instrumentation using potentiostats and how strongly it can influence results. We then discuss a number of potential-controlled and current-controlled methods for electrode characterization, including chronocoulometry, chronoamperometry, (active) potentiometry, and chronopotentiometry. They illustrate charge transfer caused by both electrode surface processes and the presence of redox-active species, such as dissolved oxygen and hydrogen, or hydrogen peroxide. We also discuss the electrode potential with respect to a reference electrode under various conditions and how it affects its electrochemical properties like surface state, catalytic properties and capability to transfer charge.Significance.Electrochemical methods are still underutilized in neural engineering, and valuable information is therefore often not accessed. Many studies on electrode characterization would benefit from a more consistent and target-oriented electrochemical methodology and instrumentation. That ranges from the investigation of new materials and processes, over electrode performance assessment to the development of more long-term stable and biocompatible neural interfaces. Ultimately, standardization, consistency and comparability will play a key role in the translation of microtechnology into biomedical and clinical applications.

Electrochemical Microsensor for Microfluidic Glyphosate Monitoring in Water Using MIP-Based Concentrators.

Glyphosate (GLY) is a broad-spectrum herbicide and is the most used pesticide worldwide. This vast usage has raised strong interest in the ecotoxicological impacts and human risks, with contamination of water being a major concern. Decentralized analytical techniques for water monitoring are of high importance. In this work, we present a small, low-cost, and time-effective electrochemical, chip-based microfluidic device for direct electrochemical detection of GLY downstream of a molecularly imprinted polymer (MIP) concentrator. We studied the electrochemical behavior of GLY and its metabolite aminomethylphosphonic acid (AMPA) using cyclic voltammetry with noble metal electrodes in acidic, neutral, and basic media. A chronoamperometric sensor protocol was developed for sensitive and selective GLY measurements on gold electrodes. The optimized protocol was transferred to a chip-based microsensor platform for online and real-time detection of GLY in a microfluidic setup. The results in the range from 0 to 50 µM GLY in 0.5 M H2SO4 show high linearity and a sensitivity of 10.3 ± 0.6 µA mm-2 mM-1 for the chip-based microfluidic platform. Successful recovery of GLY concentrated from untreated tap water and its precise detection from low volumes demonstrates the advantages of our system.

In Situ Mapping of H2, O2, and H2O2 in Microreactors: A Parallel, Selective Multianalyte Detection Method.

Determining local concentrations of the analytes in state-of-the-art microreactors is essential for the development of optimized and safe processes. However, the selective, parallel monitoring of all relevant reactants and products in a multianalyte environment is challenging. Electrochemical microsensors can provide unique information on the reaction kinetics and overall performance of the hydrogen peroxide synthesis process in microreactors, thanks to their high spatial and temporal resolution and their ability to measure in situ, in contrast to other techniques. We present a chronoamperometric approach which allows the selective detection of the dissolved gases hydrogen and oxygen and their reaction product hydrogen peroxide on the same platinum microelectrode in an aqueous electrolyte. The method enables us to obtain the concentration of each analyte using three specific potentials and to subtract interfering currents from the mixed signal. While hydrogen can be detected independently, no potentials can be found for a direct, selective measurement of oxygen and hydrogen peroxide. Instead, it was found that for combined signals, the individual contribution of all analytes superimposes linearly additive. We showed that the concentrations determined from the subtracted signals correlate very well with results obtained without interfering analytes present. For the first time, this approach allowed the mapping of the distribution of the analytes hydrogen, oxygen, and hydrogen peroxide inside a multiphase membrane microreactor, paving the way for online process control.

Microsensor Electrodes for 3D Inline Process Monitoring in Multiphase Microreactors.

We present an electrochemical microsensor for the monitoring of hydrogen peroxide direct synthesis in a membrane microreactor environment by measuring the hydrogen peroxide and oxygen concentrations. In prior work, for the first time, we performed in situ measurements with electrochemical microsensors in a microreactor setup. However, the sensors used were only able to measure at the bottom of the microchannel. Therefore, only a limited assessment of the gas distribution and concentration change over the reaction channel dimensions was possible because the dissolved gases entered the reactor through a membrane at the top of the channel. In this work, we developed a new fabrication process to allow the sensor wires, with electrodes at the tip, to protrude from the sensor housing into the reactor channel. This enables measurements not only at the channel bottom, but also along the vertical axis within the channel, between the channel wall and membrane. The new sensor design was integrated into a multiphase microreactor and calibrated for oxygen and hydrogen peroxide measurements. The importance of measurements in three dimensions was demonstrated by the detection of strongly increased gas concentrations towards the membrane, in contrast to measurements at the channel bottom. These findings allow a better understanding of the analyte distribution and diffusion processes in the microreactor channel as the basis for process control of the synthesis reaction.

New life for old wires: electrochemical sensor method for neural implants.

OBJECTIVE: Electrochemical microsensors based on noble metals can give essential information on their microenvironment with high spatio-temporal resolution. However, most advanced chemo- and biosensors lack the long-term stability for physiological monitoring of brain tissue beyond an acute application. Noble metal electrodes are widely used as neural interfaces, particularly for stimulating in the central nervous system. Our goal was to recruit already deployed, unmodified noble metal electrodes (Pt, Pt/Ir) as in situ chemical sensors. APPROACH: With advanced electrochemical sensor methods, we investigated electrode surface processes, oxidizable species and oxygen as an indicator for tissue mass transport. We developed a unique, multi-step, amperometric/potentiometric sensing procedure derived from the investigation of Pt surface processes by chronocoulometry providing fundamental characterization of the electrode itself. MAIN RESULTS: The resulting electrochemical protocol preconditions the electrode, measures oxidizable and reducible species, and the open circuit potential (OCP). A linear, stable sensor performance was demonstrated, also in the presence of proteins, validating signal stability of our cyclic protocol in complex environments. We investigated our sensor protocol with microelectrodes on custom Pt/Ir-wire tetrodes by in vivo measurements in the rat brain for up to four weeks. Results showed that catalytic activity of the electrode is lost over time, but our protocol is repeatedly able to both quantify and restore electrode sensitivity in vivo. SIGNIFICANCE: Our approach is highly relevant because it can be applied to any existing Pt electrode. Current methods to assess the brain/electrode microenvironment mainly rely on imaging techniques, histology and analysis of explanted devices, which are often end-point methods. Our procedure delivers online and time-transient information on the chemical microenvironment directly at the electrode/tissue interface of neural implants, gives new insight into the charge transfer processes, and delivers information on the state of the electrode itself addressing long-term electrode degradation.

On-chip photodynamic therapy - monitoring cell metabolism using electrochemical microsensors.

We introduce a new system which combines metabolic monitoring using electrochemical microsensors with photodynamic therapy on-chip for the first time. Oxygen consumption of T-47D breast cancer cells was measured during therapy with protoporphyrin IX. We determined the efficacy of the therapy and revealed its recovery effects, which underlines the high relevance of continuous monitoring.

Active Potentiometry for Dissolved Oxygen Monitoring with Platinum Electrodes.

Potentiometric oxygen monitoring using platinum as the electrode material was enabled by the combination of conventional potentiometry with active prepolarization protocols, what we call active potentiometry. The obtained logarithmic transfer function is well-suited for the measurement of dissolved oxygen in biomedical applications, as the physiological oxygen concentration typically varies over several decades. We describe the application of active potentiometry in phosphate buffered salt solution at different pH and ion strength. Sensitivity was in the range of 60 mV/dec oxygen concentration; the transfer function deviated from logarithmic behavior for smaller oxygen concentration and higher ion strength of the electrolyte. Long-term stability was demonstrated for 60 h. Based on these measurement results and additional cyclic voltammetry investigations a model is discussed to explain the potential forming mechanism. The described method of active potentiometry is applicable to many different potentiometric sensors possibly enhancing sensitivity or selectivity for a specific parameter.

Sensor Access to the Cellular Microenvironment Using the Sensing Cell Culture Flask.

The Sensing Cell Culture Flask (SCCF) is a cell culture monitoring system accessing the cellular microenvironment in 2D cell culture using electrochemical microsensors. The system is based on microfabricated sensor chips embedded in standard cell culture flasks. Ideally, the sensor chips could be equipped with any electrochemical sensor. Its transparency allows optical inspection of the cells during measurement. The surface of the sensor chip is in-plane with the flask surface allowing undisturbed cell growth on the sensor chip. A custom developed rack system allows easy usage of multiple flasks in parallel within an incubator. The presented data demonstrates the application of the SCCF with brain tumor (T98G) and breast cancer (T-47D) cells. Amperometric oxygen sensors were used to monitor cellular respiration with different incubation conditions. Cellular acidification was accessed with potentiometric pH sensors using electrodeposited iridium oxide films. The system itself provides the foundation for electrochemical monitoring systems in 3D cell culture.

Microsensor systems for cell metabolism - from 2D culture to organ-on-chip.

Microsensor systems for cell metabolism are essential tools for investigation and standardization in cell culture. Electrochemical and optical read-out schemes dominate, which enable the marker-free, continuous, online recording of transient effects and deliver information beyond microscopy and end-point tests. There has been much progress in microfluidics and microsensors, but the translation of both into standard cell culture procedures is still limited. Within this critical review, we discuss different cell culture formats ranging from standard culture vessels to dedicated microfluidic platforms. Key aspects are the appropriate supply of cells, mass transport of metabolites to the sensors and generation of stimuli. Microfluidics enable the transition from static to dynamic conditions in culture and measurement. We illustrate the parameters oxygen (respiration), pH (acidification), glucose and lactate (energy metabolism) as well as short-lived reactive species (ROS/RNS) from the perspective of microsensor integration in 2D and 3D cell culture. We discuss different sensor principles and types, along with their limitations, microfabrication technologies and materials. The state-of-the-art of microsensor platforms for cell culture is discussed with respect to sensor performance, the number of parameters and timescale of application. That includes the advances from 2D culture to the increasingly important 3D approaches, with specific requirements for organotypic microtissues, spheroids and solid matrix cultures. We conclude on the current progress, potential, benefits and limitations of cell culture monitoring systems from monolayer culture to organ-on-chip systems.

In-vivo monitoring of infection via implantable microsensors: a pilot study.

The most common complication after implantation of foreign material is infection, leading to implant failure and severe patient discomfort. Smoldering-infections proceed inapparently and might not get verified by radiological diagnostics. Early identification of this type of infection might significantly reduce the rate of complications. Therefore, we manufactured a microsensor strip in a hybrid of thin-film and laminate technology in a wafer-level process. It comprises electrochemical, amperometric microsensors for glucose, oxygen and lactate as well as an integrated reference electrode. Microsensors have been implanted in the mouse dorsal skin fold chamber, which got inoculated with a human-pathogen bacterial strain. A selective signal could be measured for all parameters and time points. The infection led to measurable changes of the wound environment as given by a decrease of the oxygen- as well as the glucose-concentration while the lactate concentration increased markedly over time. The given results in this study are the first hints on a promising new tool and should therefore be interpreted as a proof of the principle to show the functionality of the microsensors in an in vivo setting. These microsensors could be used to monitor smoldering infections of implantable foreign materials reducing foreign implant associated complications.

Accessing 3D microtissue metabolism: Lactate and oxygen monitoring in hepatocyte spheroids.

3D hepatic microtissues, unlike 2D cell cultures, retain many of the in-vivo-like functionalities even after long-term cultivation. Such 3D cultures are increasingly applied to investigate liver damage due to drug exposure in toxicology. However, there is a need for thorough metabolic characterization of these microtissues for mechanistic understanding of effects on culture behaviour. We measured metabolic parameters from single human HepaRG hepatocyte spheroids online and continuously with electrochemical microsensors. A microsensor platform for lactate and oxygen was integrated in a standard 96-well plate. Electrochemical microsensors for lactate and oxygen allow fast, precise and continuous long-term measurement of metabolic parameters directly in the microwell. The demonstrated capability to precisely detect small concentration changes by single spheroids is the key to access their metabolism. Lactate levels in the culture medium starting from 50µM with production rates of 5µMh-1 were monitored and precisely quantified over three days. Parallel long-term oxygen measurements showed no oxygen depletion or hypoxic conditions in the microwell. Increased lactate production by spheroids upon suppression of the aerobic metabolism was observed. The dose-dependent decrease in lactate production caused by the addition of the hepatotoxic drug Bosentan was determined. We showed that in a toxicological application, metabolic monitoring yields quantitative, online information on cell viability, which complements and supports other methods such as microscopy. The demonstrated continuous access to 3D cell culture metabolism within a standard setup improves in vitro toxicology models in replacement strategies of animal experiments. Controlling the microenvironment of such organotypic cultures has impact in tissue engineering, cancer therapy and personalized medicine.