RESUMO
Tracer diffusion in amorphous polymers is a sought-after quantity for a range of technological applications. In this regard, a quantitative description of the so-called decoupling from the reverse proportionality between viscosity and diffusion coefficient into a fractional one remains a challenge requiring a deeper insight. This work employs a Monte Carlo simulation framework in 3 dimensions to investigate the consequences of different scenarios for estimating this fractional exponent on the diffusion coefficient of tracers in polymers near glass transition. To this end, we adopted a continuous-time random walk model for tracer diffusion in the supercooled liquid state. The waiting time distribution of the diffusants was computed based on the rotational correlation times of the polymer. This proposed procedure is of particular interest because it brings the quantity of waiting time (and its statistics) in connection with the measurable observable of rotational times. In the framework of our simulations the aforementioned fractional exponent appears in the relation between the diffusant's waiting time and the rotational time of the diffusion medium. A limited comparison with experimental diffusivities from the literature revealed a reasonable agreement with a fractional exponent on the basis of the molar volumes of the diffusant and the monomeric unit. Finally, an analysis of time-averaged mean squared displacement pointed to normal Brownian dynamics for tracer diffusion in polymers above the glass transition temperature.
RESUMO
Contractile rings are formed from cytoskeletal filaments during cell division. Ring formation is induced by specific crosslinkers, while contraction is typically associated with motor protein activity. Here, we engineer DNA nanotubes and peptide-functionalized starPEG constructs as synthetic crosslinkers to mimic this process. The crosslinker induces bundling of ten to hundred DNA nanotubes into closed micron-scale rings in a one-pot self-assembly process yielding several thousand rings per microliter. Molecular dynamics simulations reproduce the detailed architectural properties of the DNA rings observed in electron microscopy. Theory and simulations predict DNA ring contraction - without motor proteins - providing mechanistic insights into the parameter space relevant for efficient nanotube sliding. In agreement between simulation and experiment, we obtain ring contraction to less than half of the initial ring diameter. DNA-based contractile rings hold promise for an artificial division machinery or contractile muscle-like materials.
Assuntos
Nanotubos , Proteínas , Divisão Celular , Proteínas/metabolismo , Citoesqueleto de Actina/metabolismo , Miosinas/metabolismo , DNA/metabolismoRESUMO
Despite the long history of investigations of polyelectrolyte multilayer formation on solid or liquid surfaces, important questions remain open concerning the construction of the first set of layers. These are generally deposited on a first anchoring layer of different chemistry, influencing their construction and properties. We propose here an in-depth investigation of the formation of NaPSS/PAH multilayers at the air/water interface in the absence of a chemically different anchoring layer, profiting from the surface activity of NaPSS. To analyse the mechanical properties of the different layers, we combine recently established analysis techniques of an inflating/deflating bubble exploiting simultaneous shape and pressure measurement: bubble shape elastometry, general stress decomposition and capillary meniscus dynanometry. We complement these measurements by interfacial shear rheology. The obtained results allow us to confirm, first of all, the strength of the aforementioned techniques to characterize complex interfaces with non-linear viscoelastic properties. Furthermore, their sensitivity allows us to show that the multilayer properties are highly sensitive to the temporal and mechanical conditions under which they are constructed and manipulated. We nevertheless identify a robust trend showing a clear transition from a liquid-like viscoelastic membrane to a solid-like viscoelastic membrane after the deposition of 5 layers. We interpret this as the number of layers required to create a fully connected multilayer, which is consistent with previous results obtained on solid or liquid interfaces.
RESUMO
Oil/water interfaces are ubiquitous in nature. Opposing polarities at these interfaces attract surface-active molecules, which can seed complex viscoelastic or even solid interfacial structure. Biorelevant proteins such as hydrophobin, polymers such as PNIPAM, and the asphaltenes in crude oil (CRO) are examples of some systems where such layers can occur. When a pendant drop of CRO is aged in brine, it can form an interfacial elastic membrane of asphaltenes so stiff that it wrinkles and crumples upon retraction. Most of the work studying CRO/brine interfaces focuses on the viscoelastic liquid regime, leaving a wide range of fully solidified, elastic interfaces largely unexplored. In this work, we quantitatively measure elasticity in all phases of drop retraction. In early retraction, the interface shows a fluid viscoelasticity measurable using a Gibbs isotherm or dilatational rheology. Further retraction causes a phase transition to a 2D elastic solid with nonisotropic, nonhomogeneous surface stresses. In this regime, we use new techniques in the elastic membrane theory to fit for the elasticities of these solid capsules. These elastic measurements can help us develop a deeper understanding not only of CRO interfaces but also of the myriad fluid systems with solid interfacial layers.
RESUMO
Traction patterns of adherent cells provide important information on their interaction with the environment, cell migration, or tissue patterns and morphogenesis. Traction force microscopy is a method aimed at revealing these traction patterns for adherent cells on engineered substrates with known constitutive elastic properties from deformation information obtained from substrate images. Conventionally, the substrate deformation information is processed by numerical algorithms of varying complexity to give the corresponding traction field via solution of an ill-posed inverse elastic problem. We explore the capabilities of a deep convolutional neural network as a computationally more efficient and robust approach to solve this inversion problem. We develop a general purpose training process based on collections of circular force patches as synthetic training data, which can be subjected to different noise levels for additional robustness. The performance and the robustness of our approach against noise is systematically characterized for synthetic data, artificial cell models, and real cell images, which are subjected to different noise levels. A comparison with state-of-the-art Bayesian Fourier transform traction cytometry reveals the precision, robustness, and speed improvements achieved by our approach, leading to an acceleration of traction force microscopy methods in practical applications.
Assuntos
Aprendizado de Máquina , Tração , Microscopia de Força Atômica/métodos , Teorema de Bayes , Movimento CelularRESUMO
In the mitotic spindle, microtubules attach to chromosomes via kinetochores. The microtubule-binding Ndc80 complex is an integral part of kinetochores, and is essential for kinetochores to attach to microtubules and to transmit forces from dynamic microtubule ends to the chromosomes. The Ndc80 complex has a rod-like appearance with globular domains at its ends that are separated by a long coiled coil. Its mechanical properties are considered important for the dynamic interaction between kinetochores and microtubules. Here, we present a novel method that allows us to time trace the effective stiffness of Ndc80 complexes following shortening microtubule ends against applied force in optical trap experiments. Applying this method to wild-type Ndc80 and three variants (calponin homology (CH) domains mutated or Hec1 tail unphosphorylated, phosphorylated, or truncated), we reveal that each variant exhibits strain stiffening; i.e., the effective stiffness increases under tension that is built up by a depolymerizing microtubule. The strain stiffening relation is roughly linear and independent of the state of the microtubule. We introduce structure-based models that show that the strain stiffening can be traced back to the specific architecture of the Ndc80 complex with a characteristic flexible kink, to thermal fluctuations of the microtubule, and to the bending elasticity of flaring protofilaments, which exert force to move the Ndc80 complexes. Our model accounts for changes in the amount of load-bearing attachments at various force levels and reproduces the roughly linear strain stiffening behavior, highlighting the importance of force-dependent binding affinity.
Assuntos
Cinetocoros , Proteínas Nucleares , Cinetocoros/metabolismo , Proteínas Nucleares/metabolismo , Microtúbulos/metabolismo , Fuso Acromático/metabolismo , Segregação de CromossomosRESUMO
An increasing number of multi-phase systems exploit complex interfaces in which capillary stresses are coupled with solid-like elastic stresses. Despite growing efforts, simple and reliable experimental characterisation of these interfaces remains a challenge, especially of their dilational properties. Pendant drop techniques are convenient, but suffer from complex shape changes and associated fitting procedures with multiple parameters. Here we show that simple analytical relationships can be derived to describe reliably the pressure-deformation relations of nearly spherical elasto-capillary droplets ("droploons") attached to a capillary. We consider a model interface in which stresses arising from a constant interfacial tension are superimposed with mechanical extra-stresses arising from the deformation of a solid-like, incompressible interfacial layer of finite thickness described by a neo-Hookean material law. We compare some standard models of liquid-like (Gibbs) and solid-like (Hookean and neo-Hookean elasticity) elastic interfaces which may be used to describe the pressure-deformation relations when the presence of the capillary can be considered negligible. Combining Surface Evolver simulations and direct numerical integration of the drop shape equations, we analyse in depth the influence of the anisotropic deformation imposed by the capillary on the pressure-deformation relation and show that in many experimentally relevant circumstances either the analytical relations of the perfect sphere may be used or a slightly modified relation which takes into account the geometrical change imposed by the capillary. Using the analogy with the stress concentration around a rigid inclusion in an elastic membrane, we provide simple non-dimensional criteria to predict under which conditions the simple analytical expressions can be used to fit pressure-deformation relations to analyse the elastic properties of the interfaces via "Capillary Pressure Elastometry". We show that these criteria depend essentially on the drop geometry and deformation, but not on the interfacial elasticity. Moreover, this benchmark case shows for the first time that Surface Evolver is a reliable tool for predictive simulations of elastocapillary interfaces. This opens doors to the treatment of more complex geometries/conditions, where theory is not available for comparison. Our Surface Evolver code is available for download in the ESI.
RESUMO
We present a realization of a fast interfacial Marangoni microswimmer by a half-spherical alginate capsule at the air-water interface, which diffusively releases water-soluble spreading molecules (weak surfactants such as polyethylene glycol (PEG)), which act as "fuel" by modulating the air-water interfacial tension. For a number of different fuels, we can observe symmetry breaking and spontaneous propulsion although the alginate particle and emission are isotropic. The propulsion mechanism is similar to soap or camphor boats, which are, however, typically asymmetric in shape or emission to select a swimming direction. We develop a theory of Marangoni boat propulsion starting from low Reynolds numbers by analyzing the coupled problems of surfactant diffusion and advection and fluid flow, which includes surfactant-induced fluid Marangoni flow, and surfactant adsorption at the air-water interface; we also include a possible evaporation of surfactant. The swimming velocity is determined by the balance of drag and Marangoni forces. We show that spontaneous symmetry breaking resulting in propulsion is possible above a critical dimensionless surfactant emission rate (Peclet number). We derive the relation between Peclet number and swimming speed and generalize to higher Reynolds numbers utilizing the concept of the Nusselt number. The theory explains the observed swimming speeds for PEG-alginate capsules, and we unravel the differences to other Marangoni boat systems based on camphor, which are mainly caused by surfactant evaporation from the liquid-air interface. The capsule Marangoni microswimmers also exhibit surfactant-mediated repulsive interactions with walls, which can be qualitatively explained by surfactant accumulation at the wall.
Assuntos
Alginatos/química , Cápsulas/química , Polietilenoglicóis/química , Tensoativos/química , Adsorção , Ar , Fenômenos Biofísicos , Simulação por Computador , Difusão , Interações Hidrofóbicas e Hidrofílicas , Modelos Químicos , Propriedades de Superfície , Tensão Superficial , ÁguaRESUMO
We present a theory for the self-propulsion of symmetric, half-spherical Marangoni boats (soap or camphor boats) at low Reynolds numbers. Propulsion is generated by release (diffusive emission or dissolution) of water-soluble surfactant molecules, which modulate the air-water interfacial tension. Propulsion either requires asymmetric release or spontaneous symmetry breaking by coupling to advection for a perfectly symmetrical swimmer. We study the diffusion-advection problem for a sphere in Stokes flow analytically and numerically both for constant concentration and constant flux boundary conditions. We derive novel results for concentration profiles under constant flux boundary conditions and for the Nusselt number (the dimensionless ratio of total emitted flux and diffusive flux). Based on these results, we analyze the Marangoni boat for small Marangoni propulsion (low Peclet number) and show that two swimming regimes exist, a diffusive regime at low velocities and an advection-dominated regime at high swimmer velocities. We describe both the limit of large Marangoni propulsion (high Peclet number) and the effects from evaporation by approximative analytical theories. The swimming velocity is determined by force balance, and we obtain a general expression for the Marangoni forces, which comprises both direct Marangoni forces from the surface tension gradient along the air-water-swimmer contact line and Marangoni flow forces. We unravel whether the Marangoni flow contribution is exerting a forward or backward force during propulsion. Our main result is the relation between Peclet number and swimming velocity. Spontaneous symmetry breaking and, thus, swimming occur for a perfectly symmetrical swimmer above a critical Peclet number, which becomes small for large system sizes. We find a supercritical swimming bifurcation for a symmetric swimmer and an avoided bifurcation in the presence of an asymmetry.
RESUMO
Chronic lung infection with bacterial biofilms is a leading cause of death in cystic fibrosis (CF) patients. Pseudomonas aeruginosa, one of the many species colonizing the lung airways, can undergo pathoadaptation, leading to a mucoid phenotype with interesting material properties. We hypothesize that the surface properties and extracellular materials of mucoid P. aeruginosa cells greatly influence the mechanical behavior of their films at fluid interfaces. In this study, we investigate the interfacial properties of films formed by nonmucoid (PANT) and mucoid (PASL) strains of P. aeruginosa isolated from CF patients. We use pendant drop elastometry to analyze the interfacial response of the films formed by PANT and PASL at the hexadecane-water interface. The dynamic rheological analyses of the films highlight the distinctive signature of the mucoid strains at fluid interfaces. The mucoid films exhibit greater relaxation following a compressive strain than a tensile one, while a full hysteresis response is achieved by the nonmucoid films; this indicates that the material properties of the PANT films are conserved under both compression and tension. The wrinkling and shape analyses of the interfacial bacterial films elucidate that the mucoid strain exhibits remarkable viscoelastic properties, enabling the remodeling of the living films and dissipation of the compressive stress. The comparative analysis of the material properties of mucoid and nonmucoid P. aeruginosa cells indicates that mucoid switch can play an important role in protecting the bacteria from interfacial stresses. Further characterization of interfacial bacterial films will provide new insights into the development of methods for controlling interfacial films of bacteria.
Assuntos
Fibrose Cística , Infecções por Pseudomonas , Biofilmes , Humanos , Pulmão , Pseudomonas aeruginosaRESUMO
Modern pendant drop tensiometry relies on the numerical solution of the Young-Laplace equation and allows us to determine the surface tension from a single picture of a pendant drop with high precision. Most of these techniques solve the Young-Laplace equation many times over to find the material parameters that provide a fit to a supplied image of a real droplet. Here, we introduce a machine learning approach to solve this problem in a computationally more efficient way. We train a deep neural network to determine the surface tension of a given droplet shape using a large training set of numerically generated droplet shapes. We show that the deep learning approach is superior to the current state of the art shape fitting approach in speed and precision, in particular if shapes in the training set reflect the sensitivity of the droplet shape with respect to surface tension. In order to derive such an optimized training set, we clarify the role of the Worthington number as a quality indicator in conventional shape fitting and in the machine learning approach. Our approach demonstrates the capabilities of deep neural networks in the material parameter determination from rheological deformation experiments, in general.
RESUMO
We illustrate a concept for shape-changing microswimmers, which exploits the hysteresis of a shape transition of an elastic object, by an elastic disk undergoing cyclic localized swelling. Driving the control parameter of a hysteretic shape transition in a completely time-reversible manner gives rise to a non-time-reversible shape sequence and a net swimming motion if the elastic object is immersed into a viscous fluid. We prove this concept with a microswimmer which is a flat circular elastic disk that undergoes a transition into a dome-like shape by localized swelling of an inner disk. The control parameter of this shape transition is a scalar swelling factor of the disk material. With a fixed outer frame with an additional attractive interaction in the central region, the shape transition between flat and dome-like shape becomes hysteretic and resembles a hysteretic opening and closing of a scallop. Employing Stokesian dynamics simulations of a discretized version of the disk we show that the swimmer is effectively moving into the direction of the opening of the dome in a viscous fluid if the swelling parameter is changed in a time-reversible manner. The swimming mechanism can be qualitatively reproduced by a simple 9-bead model.
RESUMO
Colloidal particles suspended in liquid crystals can exhibit various effective anisotropic interactions that can be tuned and utilized in self-assembly processes. We simulate a two-dimensional system of hard disks suspended in a solution of dense hard needles as a model system for colloids suspended in a nematic lyotropic liquid crystal. The novel event-chain Monte Carlo technique enables us to directly measure colloidal interactions in a microscopic simulation with explicit liquid crystal particles in the dense nematic phase. We find a directional short-range attraction for disks along the director, which triggers chaining parallel to the director and seemingly contradicts the standard liquid crystal field theory result of a quadrupolar attraction with a preferred [Formula: see text] angle. Our results can be explained by a short-range density-dependent depletion interaction, which has been neglected so far. Directionality and strength of the depletion interaction are caused by the weak planar anchoring of hard rods. The depletion attraction robustly dominates over the quadrupolar elastic attraction if disks come close. Self-assembly of many disks proceeds via intermediate chaining, which demonstrates that in lyotropic liquid crystal colloids depletion interactions play an important role in structure formation processes.
RESUMO
The actin cytoskeleton drives many essential biological processes, from cell morphogenesis to motility. Assembly of functional actin networks requires control over the speed at which actin filaments grow. How this can be achieved at the high and variable levels of soluble actin subunits found in cells is unclear. Here we reconstitute assembly of mammalian, non-muscle actin filaments from physiological concentrations of profilin-actin. We discover that under these conditions, filament growth is limited by profilin dissociating from the filament end and the speed of elongation becomes insensitive to the concentration of soluble subunits. Profilin release can be directly promoted by formin actin polymerases even at saturating profilin-actin concentrations. We demonstrate that mammalian cells indeed operate at the limit to actin filament growth imposed by profilin and formins. Our results reveal how synergy between profilin and formins generates robust filament growth rates that are resilient to changes in the soluble subunit concentration.
Assuntos
Citoesqueleto de Actina/metabolismo , Forminas/metabolismo , Células Musculares/metabolismo , Profilinas/metabolismo , Multimerização Proteica , Animais , MamíferosRESUMO
We study the axisymmetric response of a complete spherical shell under homogeneous compressive pressure p to an additional point force. For a pressure p below the classical critical buckling pressure p_{c}, indentation by a point force does not lead to spontaneous buckling but an energy barrier has to be overcome. The states at the maximum of the energy barrier represent a subcritical branch of unstable stationary points, which are the transition states to a snap-through buckled state. Starting from nonlinear shallow shell theory, we obtain a closed analytical expression for the energy barrier height, which facilitates its effective numerical evaluation as a function of pressure by continuation techniques. We find a clear crossover between two regimes: For p/p_{c}âª1 the postbuckling barrier state is a mirror-inverted Pogorelov dimple, and for (1-p/p_{c})âª1 the barrier state is a shallow dimple with indentations smaller than shell thickness and exhibits extended oscillations, which are well described by linear response. We find systematic expansions of the nonlinear shallow shell equations about the Pogorelov mirror-inverted dimple for p/p_{c}âª1 and the linear response state for (1-p/p_{c})âª1, which enable us to derive asymptotic analytical results for the energy barrier landscape in both regimes. Upon approaching the buckling bifurcation at p_{c} from below, we find a softening of an ideal spherical shell. The stiffness for the linear response to point forces vanishes â(1-p/p_{c})^{1/2}; the buckling energy barrier vanishes â(1-p/p_{c})^{3/2}; and the shell indentation in the barrier state vanishes â(1-p/p_{c})^{1/2}. This makes shells sensitive to imperfections which can strongly reduce p_{c} in an avoided buckling bifurcation. We find the same softening scaling in the vicinity of the reduced critical buckling pressure also in the presence of imperfections. We can also show that the effect of axisymmetric imperfections on the buckling instability is identical to the effect of a point force that is preindenting the shell. In the Pogorelov limit, the energy barrier maximum diverges â(p/p_{c})^{-3} and the corresponding indentation diverges â(p/p_{c})^{-2}. Numerical prefactors for proportionalities both in the softening and the Pogorelov regime are calculated analytically. This also enables us to obtain results for the critical unbuckling pressure and the Maxwell pressure.
RESUMO
We present a new system based on alginate gels for the encapsulation of a ferrofluid drop, which allows us to create millimeter-sized elastic capsules that are highly deformable by inhomogeneous magnetic fields. We use a combination of experimental and theoretical work in order to characterize and quantify the deformation behavior of these ferrofluid-filled capsules. We introduce a novel method for the direct encapsulation of unpolar liquids by sodium alginate. By adding 1-hexanol to the unpolar liquid, we can dissolve sufficient amounts of CaCl2 in the resulting mixture for ionotropic gelation of sodium alginate. The addition of polar alcohol molecules allows us to encapsulate a ferrofluid as a single phase rather than an emulsion without impairing ferrofluid stability. This encapsulation method increases the amount of encapsulated magnetic nanoparticles resulting in high deformations of approximately 30% (in height-to-width ratio) in inhomogeneous magnetic field with magnetic field variations of 50 mT over the size of the capsule. This offers possible applications of capsules as actuators, switches, or valves in confined spaces like microfluidic devices. We determine both elastic moduli of the capsule shell, Young's modulus and Poisson's ratio, by employing two independent mechanical methods, spinning capsule measurements and capsule compression between parallel plates. We then show that the observed magnetic deformation can be fully understood from magnetic forces exerted by the ferrofluid on the capsule shell if the magnetic field distribution and magnetization properties of the ferrofluid are known. We perform a detailed analysis of the magnetic deformation by employing a theoretical model based on nonlinear elasticity theory. Using an iterative solution scheme that couples a finite element/boundary element method for the magnetic field calculation to the solution of the elastic shape equations, we achieve quantitative agreement between theory and experiment for deformed capsule shapes using the Young modulus from mechanical characterization and the surface Poisson ratio as a fit parameter. This detailed analysis confirms the results from mechanical characterization that the surface Poisson ratio of the alginate shell is close to unity, that is, deformations of the alginate shell are almost area conserving.
RESUMO
We investigate the deformation of elastic microcapsules adsorbed at liquid-liquid interfaces. An initially spherical elastic capsule at a liquid-liquid interface undergoes circumferential stretching due to the liquid-liquid surface tension and becomes lens- or discus-shaped, depending on its bending rigidity. The resulting elastic capsule deformation is qualitatively similar, but distinct from the deformation of a liquid droplet into a liquid lens at a liquid-liquid interface. We discuss the deformed shapes of droplets and capsules adsorbed at liquid-liquid interfaces for a whole range of different surface elasticities: from droplets (only surface tension) deforming into liquid lenses, droplets with a Hookean membrane (finite stretching modulus, zero bending modulus) deforming into elastic lenses, to microcapsules (finite stretching and bending modulus) deforming into rounded elastic lenses. We calculate capsule shapes at liquid-liquid interfaces numerically using shape equations from nonlinear elastic shell theory. Finally, we present theoretical results for the contact angle (or the capsule height) and the maximal capsule curvature at the three phase contact line. These results can be used to infer information about the elastic moduli from optical measurements. During capsule deformation into a lens-like shape, surface energy of the liquid-liquid interface is converted into elastic energy of the capsule shell giving rise to an overall adsorption energy gain by deformation. Soft hollow capsules exhibit a pronounced increase of the adsorption energy as compared to filled soft particles and, thus, are attractive candidates as foam and emulsion stabilizers.
RESUMO
We study the influence of thermal fluctuations on the buckling behavior of thin elastic capsules with spherical rest shape. Above a critical uniform pressure, an elastic capsule becomes mechanically unstable and spontaneously buckles into a shape with an axisymmetric dimple. Thermal fluctuations affect the buckling instability by two mechanisms. On the one hand, thermal fluctuations can renormalize the capsule's elastic properties and its pressure because of anharmonic couplings between normal displacement modes of different wavelengths. This effectively lowers its critical buckling pressure [Kosmrlj and Nelson, Phys. Rev. X 7, 011002 (2017)2160-330810.1103/PhysRevX.7.011002]. On the other hand, buckled shapes are energetically favorable already at pressures below the classical buckling pressure. At these pressures, however, buckling requires to overcome an energy barrier, which only vanishes at the critical buckling pressure. In the presence of thermal fluctuations, the capsule can spontaneously overcome an energy barrier of the order of the thermal energy by thermal activation already at pressures below the critical buckling pressure. We revisit parameter renormalization by thermal fluctuations and formulate a buckling criterion based on scale-dependent renormalized parameters to obtain a temperature-dependent critical buckling pressure. Then we quantify the pressure-dependent energy barrier for buckling below the critical buckling pressure using numerical energy minimization and analytical arguments. This allows us to obtain the temperature-dependent critical pressure for buckling by thermal activation over this energy barrier. Remarkably, both parameter renormalization and thermal activation lead to the same parameter dependence of the critical buckling pressure on temperature, capsule radius and thickness, and Young's modulus. Finally, we study the combined effect of parameter renormalization and thermal activation by using renormalized parameters for the energy barrier in thermal activation to obtain our final result for the temperature-dependent critical pressure, which is significantly below the results if only parameter renormalization or only thermal activation is considered.
RESUMO
We provide a C/C++ software for the shape analysis of deflated elastic capsules in a pendant capsule geometry, which is based on an elastic description of the capsule material as a quasi two-dimensional elastic membrane using shell theory. Pendant capsule elastometry provides a new in situ and non-contact method for interfacial rheology of elastic capsules that goes beyond determination of the Gibbs- or dilational modulus from area-dependent measurements of the surface tension using pendant drop tensiometry, which can only give a rough estimate of the elastic capsule properties as they are based on a purely liquid interface model. Given an elastic model of the capsule membrane, pendant capsule elastometry determines optimal elastic moduli by fitting numerically generated axisymmetric shapes optimally to an experimental image. For each digitized image of a deflated capsule elastic moduli can be determined, if another image of its undeformed reference shape is provided. Within this paper, we focus on nonlinear Hookean elasticity because of its low computational cost and its wide applicability, but also discuss and implement alternative constitutive laws. For Hookean elasticity, Young's surface modulus (or, alternatively, area compression modulus) and Poisson's ratio are determined; for Mooney-Rivlin elasticity, the Rivlin modulus and a dimensionless shape parameter are determined; for neo-Hookean elasticity, only the Rivlin modulus is determined, using a fixed dimensionless shape parameter. Comparing results for different models we find that nonlinear Hookean elasticity is adequate for most capsules. If series of images are available, these moduli can be evaluated as a function of the capsule volume to analyze hysteresis or aging effects depending on the deformation history or to detect viscoelastic effects for different volume change rates. An additional wrinkling wavelength measurement allows the user to determine the bending modulus, from which the layer thickness can be derived. We verify the method by analyzing several materials, compare the results to available rheological measurements, and review several applications. We make the software available under the GPL license at github.com/jhegemann/opencapsule.
RESUMO
We discuss the adsorption of semiflexible polymers to a planar attractive wall and focus on the questions of the adsorption threshold for polymers of finite length and their loop and tail distributions using both Monte Carlo simulations and analytical arguments. For the adsorption threshold, we find three regimes: (i) a flexible or Gaussian regime if the persistence length is smaller than the adsorption potential range, (ii) a semiflexible regime if the persistence length is larger than the potential range, and (iii) for finite polymers, a novel crossover to a rigid rod regime if the deflection length exceeds the contour length. In the flexible and semiflexible regimes, finite size corrections arise because the correlation length exceeds the contour length. In the rigid rod regime, however, it is essential how the global orientational or translational degrees of freedom are restricted by grafting or confinement. We discuss finite size corrections for polymers grafted to the adsorbing surface and for polymers confined by a second (parallel) hard wall. Based on these results, we obtain a method to analyze adsorption data for finite semiflexible polymers such as filamentous actin. For the loop and tail distributions, we find power laws with an exponential decay on length scales exceeding the correlation length. We derive and confirm the loop and tail power law exponents for flexible and semiflexible polymers. This allows us to explain that, close to the transition, semiflexible polymers have significantly smaller loops and both flexible and semiflexible polymers desorb by expanding their tail length. The tail distribution allows us to extract the free energy per length of adsorption for actin filaments from experimental data [D. Welch et al., Soft Matter 11, 7507 (2015)].