Fe-Porphyrin Cross-Linked Hydrogel for Reactive Oxygen Species Scavenging and Oxygen Generation in Diabetic Wounds.

Healing chronic diabetic wounds is challenging because of excessive reactive oxygen species (ROS) and hypoxia in the wound microenvironment. To address this issue, we propose a hydrogel wound dressing composed of polyethylene glycol (PEG) cross-linked with a biomimetic catalase, Fe-containing porphyrin (FeP) (i.e., FeP hydrogel). The immobilized FeP can serve as a catalyst for both ROS scavenging and O2 generation. The properties of the hydrogels were optimized by varying the composition ratios of the two constituent materials based on their mechanical properties and catalytic activity. Our in vitro cell experiments revealed that the FeP-80 hydrogel enhanced the proliferation and migration of keratinocytes and dermal fibroblasts and promoted the expression of angiogenic growth factors in keratinocytes. When tested with an in vivo diabetic chronic wound model, the FeP-80 hydrogel promoted wound healing by facilitating re-epithelialization, promoting angiogenesis, and suppressing inflammation, compared with other control groups.

Batteryless implantable device with built-in mechanical clock for automated and precisely timed drug administration.

Adherence to medication plays a crucial role in the effective management of chronic diseases. However, patients often miss their scheduled drug administrations, resulting in suboptimal disease control. Therefore, we propose an implantable device enabled with automated and precisely timed drug administration. Our device incorporates a built-in mechanical clock movement to utilize a clockwork mechanism, i.e., a periodic turn of the hour axis, enabling automatic drug infusion at precise 12-h intervals. The actuation principle relies on the sophisticated design of the device, where the rotational movement of the hour axis is converted into potential mechanical energy and is abruptly released at the exact moment for drug administration. The clock movement can be charged either automatically by mechanical agitations or manually by winding the crown, while the device remains implanted, thereby enabling the device to be used permanently without the need for batteries. When tested using metoprolol, an antihypertensive drug, in a spontaneously hypertensive animal model, the implanted device can deliver drug automatically at precise 12-h intervals without the need for further attention, leading to similarly effective blood pressure control and ultimately, prevention of ventricular hypertrophy as compared with scheduled drug administrations. These findings suggest that our device is a promising alternative to conventional methods for complex drug administration.

Microneedles coated with composites of phenylboronic acid-containing polymer and carbon nanotubes for glucose measurements in interstitial fluids.

A microneedle (MN) sensor coated with a sensing composite material was proposed for measuring glucose concentrations in interstitial fluid (ISF). The sensing composite material was prepared by blending a polymer containing glucose-responsive phenylboronic acid (PBA) moieties (i.e., polystyrene-block-poly(acrylic acid-co-acrylamidophenylboronic acid)) with conductive carbon nanotubes (CNTs). The polymer exhibited reversible swelling behavior in response to glucose concentrations, which influenced the distribution of the embedded CNTs, resulting in sensitive variations in electrical percolation, even when coated onto a confined surface of the MN in the sensor. We varied the ratio of PBA moieties and the loading amount of CNTs in the sensing composite material of the MN sensor and tested them in vitro using an ISF-mimicking gel with physiological glucose concentrations to determine the optimal sensitivity conditions. When tested in animal models with varying blood glucose concentrations, the MN sensor coated with the selected sensing material exhibited a strong correlation between the measured electrical currents and blood glucose concentrations, showing accuracy comparable to that of a glucometer in clinical use.

Fe-containing metal-organic framework with D-penicillamine for cancer-specific hydrogen peroxide generation and enhanced chemodynamic therapy.

Chemodynamic therapy (CDT) is based on the production of cytotoxic reactive oxygen species, such as hydroxyl radicals (•OH). Thus, CDT can be advantageous when it is cancer-specific, in terms of efficacy and safety. Therefore, we propose NH2-MIL-101(Fe), a Fe-containing metal-organic framework (MOF), as a carrier of Cu (copper)-chelating agent, d-penicillamine (d-pen; i.e., the NH2-MIL-101(Fe)/d-pen), as well as a catalyst with Fe-metal clusters for Fenton reaction. NH2-MIL-101(Fe)/d-pen in the form of nanoparticles was efficiently taken into cancer cells and released d-pen in a sustained manner. The released d-pen chelated Cu that is highly expressed in cancer environments and this produces extra H2O2, which is then decomposed by Fe in NH2-MIL-101(Fe) to generate •OH. Therefore, the cytotoxicity of NH2-MIL-101(Fe)/d-pen was observed in cancer cells, not in normal cells. We also suggest a formulation of NH2-MIL-101(Fe)/d-pen combined with NH2-MIL-101(Fe) loaded with the chemotherapeutic drug, irinotecan (CPT-11; NH2-MIL-101(Fe)/CPT-11). When intratumorally injected into tumor-bearing mice in vivo, this combined formulation exhibited the most prominent anticancer effects among all tested formulations, owing to the synergistic effect of CDT and chemotherapy.

Implantable device with magnetically rotating disk for needle-free administrations of emergency drug.

Prompt administration of first-aid drugs can save lives during medical emergencies such as anaphylaxis and hypoglycemia. However, this is often performed by needle self-injection, which is not easy for patients under emergency conditions. Therefore, we propose an implantable device capable of on-demand administration of first-aid drugs (i.e., the implantable device with a magnetically rotating disk [iMRD]), such as epinephrine and glucagon, via a noninvasive simple application of the magnet from the outside skin (i.e., the external magnet). The iMRD contained a disk embedded with a magnet, as well as multiple drug reservoirs that were sealed with a membrane, which was designed to rotate at a precise angle only when the external magnet was applied. During this rotation, the membrane on a designated single-drug reservoir was aligned and torn to expose the drug to the outside. When implanted in living animals, the iMRD, actuated by an external magnet, delivers epinephrine and glucagon, similar to conventional subcutaneous needle injections.

Implantable device actuated by manual button clicks for noninvasive self-drug administration.

Self-injectable therapy has several advantages in the treatment of metabolic disorders. However, frequent injections with needles impair patient compliance and medication adherence. Therefore, we develop a fully implantable device capable of on-demand administration of self-injection drugs via noninvasive manual button clicks on the outer skin. The device is designed to infuse the drug only at the moment of click actuation, which allows for an accurate and reproducible drug infusion, and also prevents unwanted drug leakage. Using a mechanical means of drug infusion, this implantable device does not contain any electronic compartments or batteries, making it compact, and semi-permanent. When tested in animals, the device can achieve subcutaneous injection-like pharmacokinetic and pharmacodynamic effects for self-injection drugs such as exenatide, insulin, and glucagon.

Metal-organic framework for biomimetic nitric oxide generation and anticancer drug delivery.

The potential therapeutic implications of nitric oxide (NO) have drawn a great deal of interest for reversing multidrug resistance (MDR) in cancer; however, previous strategies utilized unstable or toxic NO donors often oxidized by the excessive addition of reactive oxygen species, leading to unexpected side effects. Therefore, this study proposed a metal-organic framework (MOF), Porous coordination network (PCN)-223-Fe, to be loaded with a biocompatible NO donor, L-arginine (L-arg; i.e., PCN-223-Fe/L-arg). This specific MOF possesses a ligand of Fe-porphyrin, a biomimetic catalyst. Thus, with PCN-223-Fe/L-arg, L-arg was released in a sustained manner, which generated NO by a catalytic reaction between L-arg and Fe-porphyrin in PCN-223-Fe. Through this biomimetic process, PCN-223-Fe/L-arg could generate sufficient NO to reverse MDR at the expense of hydrogen peroxide already present and highly expressed in cancer environments. For treatment of MDR cancer, this study also proposed PCN-223-Fe loaded with an anticancer drug, irinotecan (CPT-11; i.e., PCN-223-Fe/CPT-11), to be formulated together with PCN-223-Fe/L-arg. Owing to the synergistic effect of reversed MDR by NO generation and sustained release of CPT-11, this combined formulation exhibited a higher anticancer effect on MDR cancer cells (MCF-7/ADR). When intratumorally injected in vivo, coadministration of PCN-223-Fe/L-arg and PCN-223-Fe/CPT-11 greatly suppressed tumor growth in nude mice bearing MDR tumors.

Cabozantinib-Loaded PLGA Nanoparticles: A Potential Adjuvant Strategy for Surgically Resected High-Risk Non-Metastatic Renal Cell Carcinoma.

Patients with high-risk non-metastatic renal cell carcinoma (RCC) are at risk of metastatic relapse following nephrectomy. Cabozantinib (CZ), a potent multitarget tyrosine kinase inhibitor, interferes with angiogenesis and immunosuppression associated with surgery-induced metastasis. Here, we explored the therapeutic potential of CZ-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (CZ-PLGA-NPs) as an adjuvant strategy for targeting post-nephrectomy metastasis. A clinically relevant subline recapitulating post-nephrectomy lung metastasis of high-risk human RCC, namely Renca-SRLu5-Luc, was established through in vivo serial selection of luciferase-expressing murine RCC Renca-Luc cells. CZ was encapsulated into PLGA-NPs via the conventional single emulsion technique. The multifaceted preclinical antimetastatic efficacy of CZ-PLGA-NPs was assessed in Renca-SRLu5-Luc cells. CZ-PLGA-NPs with a smooth surface displayed desirable physicochemical properties, good CZ encapsulation efficiency, as well as controlled and sustained CZ release. CZ-PLGA-NPs exhibited remarkable dose-dependent toxicity against Renca-SRLu5-Luc cells by inducing G2/M cell cycle arrest and apoptosis. CZ-PLGA-NPs attenuated in vitro colony formation, migration, and invasion by abrogating AKT and ERK1/2 activation. An intravenous injection of CZ-PLGA-NPs markedly reduced lung metastatic burden and prolonged lifespan with favorable safety in the Renca-SRLu5-Luc experimental lung metastasis model. The novel CZ-PLGA-NPs system with multifaceted antimetastatic effects and alleviating off-target toxicity potential is a promising adjunctive agent for patients with surgically resected high-risk RCC.

Magnetically actuating implantable pump for the on-demand and needle-free administration of human growth hormone.

A bolus of human growth hormone (hGH) is often prescribed for the treatment of growth hormone deficiency, which requires frequent injections in current clinical settings. This painful needle-involved delivery often results in poor patient compliance, leading to low medication adherence and poor clinical outcomes. Therefore, we propose a magnetically actuating implantable pump (MAP) that can infuse an accurate dose of hGH only at the time of non-invasive magnet application from the skin. The MAP herein could reproducibly infuse 20.6 ±â€¯0.9 µg hGH per actuation without any leak at times without actuation. The infused amount increased proportionally with an increase in the number of actuations. When the MAP was implanted and actuated with a magnet in animals with growth hormone deficiency for 21 days, the profiles of plasma hGH concentration and insulin-like growth factor (IGF)-1, as well as changes in body weight, were similar to those observed in animals treated with conventional subcutaneous hGH injections. Therefore, we anticipate that the MAP fabricated in this study can be a non-invasive alternative to administer hGH without repeated and frequent needle injections.

Microchannel-embedded implantable device with fibrosis suppression for prolonged controlled drug delivery.

For the prolonged, controlled delivery of systemic drugs, we propose an implantable drug-delivery chip (DDC) embedded with pairs of a microchannel and drug-reservoir serving as a drug diffusion barrier and depot, respectively. We pursued a DDC for dual drugs: a main-purpose drug, diclofenac (DF), for systemic exposure, and an antifibrotic drug, tranilast (TR), for local delivery. Thus, the problematic fibrotic tissue formation around the implanted device could be diminished, thereby less hindrance in systemic exposure of DF released from the DDC. First, we separately prepared DDCs for DF or TR delivery, and sought to find a proper microchannel length for a rapid onset and sustained pattern of drug release, as well as the required drug dose. Then, two distinct DDCs for DF and TR delivery, respectively, were assembled to produce a Dual_DDC for the concurrent delivery of DF and TR. When the Dual_DDC was implanted in living rats, the DF concentration in blood plasma did not drop significantly in the later periods after implantation relative to that in the early periods before fibrotic tissue formation. When the Dual_DDC was implanted without TR, there was a significant decrease in the blood plasma DF concentration as the time elapsed after implantation. Biopsied tissues around the Dual_DDC exhibited a significant decrease in the fibrotic capsule thickness and collagen density relative to the Dual_DDC without TR, owing to the effect of the local, sustained release of the TR.

Indwelling urinary catheter assembled with lidocaine-loaded polymeric strand for local sustained alleviation of bladder discomfort.

Indwelling urinary catheters (IUCs) are used in clinical settings to assist detrusor contraction in hospitalized patients. However, an inserted IUC often causes catheter-related bladder discomfort. To resolve this, we propose an IUC coupled with local, sustained release of an anesthetic drug, lidocaine. For this, a thin strand composed of poly (lactic-co-glycolic acid) and lidocaine was separately prepared as a drug delivery carrier, which was then wound around the surface of the IUC to produce the drug-delivery IUC. Our results revealed that the drug-delivery IUC could exert the pain-relief effects for up to 7 days when placed in the bladder of living rats. Cystometrogram tests indicated that the drug-delivery IUC could significantly relieve bladder discomfort compared with the IUC without lidocaine. Furthermore, the expression of pain-related inflammatory markers, such as nerve growth factor, cyclooxygenase-2, and interleukin-6 in the biopsied bladder tissues was significantly lower when the drug-delivery IUC was used. Therefore, we conclude that an IUC simply assembled with a drug-loaded polymer strand can continuously release lidocaine to allow for the relief of bladder discomfort during the period of IUC insertion.

Magnetically-driven implantable pump for on-demand bolus infusion of short-acting glucagon-like peptide-1 receptor agonist.

For type 2 diabetic patients, short acting glucagon-like peptide-1 receptor agonist (GLP-1 RA) is often prescribed with frequent needled injections. Long-acting GLP-1 RA for less frequent injections do not mimic physiologic secretion of GLP-1. Therefore, an implantable pump is proposed in this work, which can deliver a short-acting GLP-1 RA, exenatide, without needles and batteries. The implanted pump can infuse an accurate amount of exenatide bolus only when a noninvasive magnetic force is applied from outside the body. The pump includes a safety feature of patterned magnets for actuation to prevent accidental infusion possibly caused by a general household magnet. The reservoir for exenatide is made of a flexible biomaterial and thus, a negative pressure build-up in the reservoir can be prevented even after multiple actuations and almost all drug consumption (~ 94%). This allows a reproducible drug dose for a longer period after implantation, hence less frequent replenishment procedures. The pump is also equipped with an intermediate container with two distinct check-valves and thus, the reservoir of exenatide can be further separated and better prevented from infiltration of the bodily fluid surrounding the implanted pump. When tested in Goto-Kakizaki rats, the pump demonstrates the efficacy of exenatide similar to conventional subcutaneous injections. Therefore, the pump can be promising for patient-friendly, optimal delivery of short-acting GLP-1 RA that better follows the physiologic secretion profile of GLP-1.

Elastic net of polyurethane strands for sustained delivery of triamcinolone around silicone implants of various sizes.

We propose an elastic net made of a biocompatible polymer to wrap silicone implants of various sizes, which also allows for the sustained release of an anti-inflammatory drug, triamcinolone, to prevent fibrosis. For this, we first prepared a strand composed of a mixture of polyurethane and triamcinolone via electrospinning, which was then assembled to prepare the elastic drug-delivery net (DDN). The DDN was prepared to just fit for wrapping the small silicone implant sample herein, but was also able to wrap a sample 7 times as large at 72% strain due to the elastic property of polyurethane. The DDN exhibited sustained drug release for 4 weeks, the profile of which was not very different between the intact and strained DDNs. When implanted in a subcutaneous pocket in living rats, the DDN-wrapped silicone implant samples showed an obvious antifibrotic effect due to the sustained release of triamcinolone. Importantly, this effect was similar for the small and large silicone samples, both wrapped with the same DDN. Therefore, we conclude that this drug-loaded net made of an elastic, biocompatible polymer has high potential for sustained drug delivery around silicone implants manufactured in various sizes.

Implantable multireservoir device with stimulus-responsive membrane for on-demand and pulsatile delivery of growth hormone.

Implantable devices for on-demand and pulsatile drug delivery have attracted considerable attention; however, many devices in clinical use are embedded with the electronic units and battery inside, hence making them large and heavy for implantation. Therefore, we propose an implantable device with multiple drug reservoirs capped with a stimulus-responsive membrane (SRM) for on-demand and pulsatile drug delivery. The SRM is made of thermosensitive POSS(MEO2MA-co-OEGMA) and photothermal nanoparticles of reduced graphene oxide (rGO), and each of the drug reservoirs is filled with the same amount of human growth hormone (hGH). Therefore, with noninvasive near-infrared (NIR) irradiation from the outside skin, the rGO nanoparticles generate heat to rupture the SRM in the implanted device, which can open a single selected drug reservoir to release hGH. Therefore, the device herein is shown to release hGH reproducibly only at the times of NIR irradiation without drug leakage during no irradiation. When implanted in rats with growth hormone deficiency and irradiated with an NIR light from the outside skin, the device exhibits profiles of hGH and IGF1 plasma concentrations, as well as body weight change, similar to those in animals treated with conventional s.c. hGH injections.

Silicone Implant Coated with Tranilast-Loaded Polymer in a Pattern for Fibrosis Suppression.

Pathologic fibrosis around silicone implants is problematic, and thus, these implants have been coated with a mixture of a biocompatible polymer and antifibrotic drug for sustained drug release to prevent fibrosis. However, a coating applied over an entire surface would be subject to mechanical instability as the implant would be severely crumpled for implant insertion. Therefore, in this work, we proposed localized, patterned coating dots, each composed of poly(lactic-co-glycolic acid) (PLGA) and tranilast, to be applied on the surface of silicone implants. The drug loaded in the pattern-coated implant herein was well retained after a cyclic tensile test. Due to the presence of PLGA in each coating dot, the tranilast could be released in a sustained manner for more than 14 days. When implanted in a subcutaneous pocket in living rats for 12 weeks, compared with the intact implant, the pattern-coated implant showed a decreased capsule thickness and collagen density, as well as less transforming growth factor-ß (TGF-ß) expression and fewer fibroblasts; importantly, these changes were similar between the surfaces with and without the coating dots. Therefore, we conclude that the pattern-coating strategy proposed in this study can still effectively prevent fibrosis by maintaining the physical stability of the coatings.