Flexible-type ultrathin holographic endoscope for microscopic imaging of unstained biological tissues.

Ultrathin lensless fibre endoscopes offer minimally invasive investigation, but they mostly operate as a rigid type due to the need for prior calibration of a fibre probe. Furthermore, most implementations work in fluorescence mode rather than label-free imaging mode, making them unsuitable for general medical diagnosis. Herein, we report a fully flexible ultrathin fibre endoscope taking 3D holographic images of unstained tissues with 0.85-µm spatial resolution. Using a bare fibre bundle as thin as 200-µm diameter, we design a lensless Fourier holographic imaging configuration to selectively detect weak reflections from biological tissues, a critical step for label-free endoscopic reflectance imaging. A unique algorithm is developed for calibration-free holographic image reconstruction, allowing us to image through a narrow and curved passage regardless of fibre bending. We demonstrate endoscopic reflectance imaging of unstained rat intestine tissues that are completely invisible to conventional endoscopes. The proposed endoscope will expedite a more accurate and earlier diagnosis than before with minimal complications.

8 W 240 fs diode-pumped Yb:Y2O3 ceramic thin-rod femtosecond amplifier.

A diode-pumped Yb:Y2O3 ceramic thin-rod amplifier which operates in the femtosecond regime is studied here. In a single-stage and direct four-pass amplification scheme, the amplifier delivers maximum output power of 8.1 W at a center wavelength of 1030.5 nm and spectral bandwidth of 4.8 nm. Assume a sech2-shaped pulse, a pulse duration of 239 fs is measured, exhibiting a time-bandwidth product value of 0.324. To the best of our knowledge, our Yb:Y2O3 ceramic thin-rod femtosecond amplifier exhibits the shortest pulse duration with Watt-level output power among all Yb:Y2O3-based femtosecond amplifiers.

Label-free neuroimaging in vivo using synchronous angular scanning microscopy with single-scattering accumulation algorithm.

Label-free in vivo imaging is crucial for elucidating the underlying mechanisms of many important biological systems in their most native states. However, the applicability of existing modalities has been limited to either superficial layers or early developmental stages due to tissue turbidity. Here, we report a synchronous angular scanning microscope for the rapid interferometric recording of the time-gated reflection matrix, which is a unique matrix characterizing full light-specimen interaction. By applying single scattering accumulation algorithm to the recorded matrix, we removed both high-order sample-induced aberrations and multiple scattering noise with the effective aberration correction speed of 10,000 modes/s. We demonstrated in vivo imaging of whole neural network throughout the hindbrain of the larval zebrafish at a matured stage where physical dissection used to be required for conventional imaging. Our method will expand the scope of applications for optical imaging, where fully non-invasive interrogation of living specimens is critical.

Comparative study of Yb:KYW planar waveguide lasers Q-switched by direct- and evanescent-field interaction with carbon nanotubes.

Both direct- and evanescent-field interactions with carbon nanotubes (CNTs) are applied to achieve stable Q-switched operation of Yb:KYW planar waveguide lasers. The performance characteristics were investigated in a same cavity configuration and analyzed in detail in the following three cases, CNTs deposited onto end mirror (M-coating), output coupler (OC-coating) and top surface of the planar waveguide (WG-coating). Maximum output powers, repetition rates, and minimum pulse durations are 61 mW, 1103 kHz and 215 ns for OC-coating, 39 mW, 1052 kHz and 275 ns for WG-coating, and 26 mW, 1119 kHz and 217 ns for M-coating, respectively. From the calculation of the configuration-dependent stability range, the beam size and the electric field distribution in the Yb:KYW planar waveguide, it is confirmed that the evanescent-field interaction scheme makes stable Q-switching possible with much lower intensities at saturable absorber compared to the direct-field interaction scheme in the presented waveguide laser operation.

Exploring anti-reflection modes in disordered media.

Sensing and manipulating targets hidden under scattering media are universal problems that take place in applications ranging from deep-tissue optical imaging to laser surgery. A major issue in these applications is the shallow light penetration caused by multiple scattering that reflects most of incident light. Although advances have been made to eliminate image distortion by a scattering medium, dealing with the light reflection has remained unchallenged. Here we present a method to minimize reflected intensity by finding and coupling light into the anti-reflection modes of a scattering medium. In doing so, we achieved more than a factor of 3 increase in light penetration. Our method of controlling reflected waves makes it readily applicable to in vivo applications in which detector sensors can only be positioned at the same side of illumination and will therefore lay the foundation of advancing the working depth of many existing optical imaging and treatment technologies.

Gigahertz repetition rate, sub-femtosecond timing jitter optical pulse train directly generated from a mode-locked Yb:KYW laser.

We show that a 1.13 GHz repetition rate optical pulse train with 0.70 fs high-frequency timing jitter (integration bandwidth of 17.5 kHz-10 MHz, where the measurement instrument-limited noise floor contributes 0.41 fs in 10 MHz bandwidth) can be directly generated from a free-running, single-mode diode-pumped Yb:KYW laser mode-locked by single-wall carbon nanotube-coated mirrors. To our knowledge, this is the lowest-timing-jitter optical pulse train with gigahertz repetition rate ever measured. If this pulse train is used for direct sampling of 565 MHz signals (Nyquist frequency of the pulse train), the jitter level demonstrated would correspond to the projected effective-number-of-bit of 17.8, which is much higher than the thermal noise limit of 50 Ω load resistance (~14 bits).

Relation between transmission eigenchannels and single-channel optimizing modes in a disordered medium.

The wave transport through disordered media, although a random process, has some universal physical properties. One of these properties that has been investigated in this report is the relation between transmission eigenchannels and the so-called single-channel optimizing mode, which maximizes the intensity of the transmitted wave at a single specific output channel. Since single-channel optimizing modes have higher transmittance than the uncontrolled waves, it has been predicted before that transmission eigenchannels with higher transmittance preferentially contribute to the single-channel optimizing modes in proportion to the square of eigenvalues. In this Letter, we report the experimental validation of this prediction by measuring cross-correlation between the single-channel optimizing modes and the transmission eigenchannels.

Study of operation dynamics for crystal temperature measurement in a diode end-pumped monolithic Yb:YAG laser.

A temperature measurement scheme was proposed in a diode end-pumped thin monolithic Yb:YAG laser by analyzing the red-shifting behaviors of each lasing peak. The amount of peak shift was measured on the basis of the threshold lasing spectrum by using a chopped pump beam. In order to determine the effective scale factor, the ratio between the peak shift and the temperature rise, the dynamics of the spectral shift, the output beam profile, and the output power were investigated. The effective scale factor was determined to be about 0.0114 nm/°C in the case of the crystal sandwiched by copper bocks with a hole, wherein the plane stress approximation is valid. On the other hand, the effective scale factor significantly decreased in the case of the crystal sandwiched by sapphire plates.

1.2-GHz repetition rate, diode-pumped femtosecond Yb:KYW laser mode-locked by a carbon nanotube saturable absorber mirror.

We demonstrate a 1.2-GHz repetition rate, diode-pumped, self-starting, 168-fs (FWHM) pulsewidth Yb:KYW laser mode-locked by a carbon nanotube (CNT) saturable absorber mirror. To our knowledge, this result corresponds to the highest repetition rate from CNT-mode-locked femtosecond bulk solid-state lasers, reaching the GHz regime for the first time.

Lag synchronization in coupled Nd:YAG lasers pumped by laser diodes.

We experimentally investigate lag synchronization in mutually coupled Nd:YAG lasers. Two laser diode pumped Nd:YAG lasers, when they are electronically coupled, exhibit lag synchronization for a strong coupling strength region. We investigate the synchronous behaviors of the lasers by analyzing error dynamics, phase portraits, and similarity function. We confirm the observation of lag synchronization by obtaining the probability distribution of the intermittent lag synchronization length before lag synchronization.