RESUMO
The model for ocean surface wave propagation can be formulated either in the form of deterministic models or stochastic models. The stochastic models appear to be particularly attractive in the global domain due to their computational efficiency. However, in the nearshore region, the phase becomes highly correlated, and the phase information therefore becomes critical. Therefore, a simplified consistent nonlinear mild-slope equation model has been developed in order to take advantage of the deterministic model for handling phase information, as well as the stochastic model for numerical simplicity. We demonstrate the advanced performance of the present model for random waves by comparing it with laboratory data and previous models.
RESUMO
In this study, we present a facile surface modification method using green solvents for a commercial polyimide (PI) nanofiltration membrane to exhibit good acid stability. To enhance acid stability, the PI organic solvent nanofiltration membrane was modified using Fenton's reaction, an oxidative cross-linking process, using environmentally friendly solvents: water and ethanol. The surface properties of the pristine and modified PI membranes were investigated and compared using various analytical tools. We studied the surface morphology using scanning electron microscopy, performed elemental analysis using X-ray photoelectron spectroscopy, investigated chemical bonds using attenuated total reflectance-Fourier transform infrared spectroscopy, and studied thermal stability using thermogravimetric analysis. The acid resistances of the pristine and modified membranes were confirmed through performance tests. The pristine PI nanofiltration membrane exposed to a 50 w/v% sulfuric acid for 4 h showed an increase in the normalized water flux to 205% and a decrease in the MgSO4 normalized rejection to 44%, revealing damage to the membrane. The membrane modified by the Fenton reaction exhibited a decline in flux and improved rejection, which are typical performance changes after surface modification. However, the Fenton-modified membrane exposed to 50 w/v% sulfuric acid for 4 h showed a flux increase of 7% and a rejection increase of 4%, indicating improved acid resistance. Furthermore, the Fenton post-treatment enhanced the thermal stability and organic solvent resistance of the PI membrane. This study shows that the acid resistance of PI membranes can be successfully improved by a novel and facile Fenton reaction using green solvents.
RESUMO
In research on membranes, the addition of co-solvents to the polymer dope solution is a common method for tuning the morphology and separation performance. For organic solvent nanofiltration (OSN) applications, we synthesized polybenzimidazole (PBI) membranes with high separation properties and stability by adding acetonitrile (MeCN) to the dope solution, followed by crosslinking with dibromo-p-xylene. Accordingly, changes in the membrane structure and separation properties were investigated when MeCN was added. PBI/MeCN membranes with a dense and thick active layer and narrow finger-like macrovoids exhibited superior rejection properties in the ethanol solution compared with the pristine PBI membrane. After crosslinking, they displayed superior rejection properties (96.56% rejection of 366-g/mol polypropylene glycol). In addition, the membranes demonstrated stable permeances for various organic solvents, including acetone, methanol, ethanol, toluene, and isopropyl alcohol. Furthermore, to evaluate the feasibility of the modified PBI OSN membranes, ecamsule, a chemical product in the fine chemical industry, was recovered. Correspondingly, the efficient recovery of ecamsule from a toluene/methanol solution using the OSN process with PBI/MeCN membranes demonstrated their applicability in many fine chemical industries.
RESUMO
The membrane filtration process is the most widely used purification process in various industries due to its high separation efficiency, process simplicity, and low cost. Although there is a wide range of membrane products with diverse materials and pore sizes on the market, there is a technological gap between microfiltration and ultrafiltration membranes. Here we developed highly porous polyvinylidene fluoride (PVDF) membranes with a selective skin layer with a pore size range of 20 to 80 nm by using a thermal-vapor assisted phase separation method. Porous and bi-continuous sublayers were generated from spinodal decomposition induced by cooling. The overall membrane structure and pore size changed with the dope composition, while the pore size and thickness of the selective skin layer were effectively controlled by water vapor exposure. The excellent nanoparticle removal efficiencies of the prepared PVDF membranes were confirmed, indicating their potential application in high-level purification processes to remove small trace organic or inorganic impurities from various industrial fluids.
RESUMO
A nonlinear frequency-domain model and a probabilistic wave breaking model have been employed together to simulate the propagation of nearshore wave breaking and to provide estimates of related statistical quantities such as skewness and asymmetry. This combination of models requires a pre-specification of the frequency dependence of dissipation. Prior work has suggested that a frequency-squared weighting for the dissipation term is most appropriate via physical arguments. However, the original frequency distribution function significantly underpredicts the higher-order moments, particularly the accuracy of asymmetry predictions is in need of further improvement. An intensity of frequency dependence for the breaking-induced damping coefficient is introduced here to further adjust the dissipation function in order to increase the accuracy of asymmetry predictions. By correcting the frequency dependence function with a new form of frequency dependence in the breaking coefficient, the model results are in better agreement with the measurements of the spectrum and higher-order statistics, as well as with the free surface elevation measurements. It is also seen from testing the model with three different cases that the more evident the influence of the breaking mechanism is on the wave transformation process, the more pronounced the contribution of this modification is.
RESUMO
In this study, the effect of graphene oxide nanosheets (GONs) embedded in a thin-film composite (TFC) polyamide (PA) membrane on the acid resistance of the membrane was investigated by comparison with the effect of oxidized single-walled carbon nanotubes (o-SWNTs). Both GONs and o-SWNTs increased the hydrophilicity of the membranes and caused the formation of ridges and clustered bumps on the surfaces, resulting in slightly improved water permeability. However, the o-SWNTs-embedded membrane did not show a difference in acid resistance depending on the concentration of embedded material, but the acid resistance of the GONs-embedded membrane increased with increasing concentration. The acid resistance of the GONs-embedded membranes appears to be mainly due to the barrier effect caused by the nanosheet shape of the GONs along with a sacrificial role of the PA layer protruded by the addition of GONs and the decrease of acid reaction sites by the hydrogen bonding between GONs and PA. When the TFC PA membrane was prepared with a high amount (300 ppm) of the GONs without considering aggregation of GONs, membrane selectivity exceeding 95% was maintained 4.7 times longer than the control TFC membrane. This study shows that the acid resistance can be enhanced by the use of GONs, which give a barrier effect to the membrane.
RESUMO
A new nonlinear frequency-domain model based on the mild-slope equation is outlined. The model is an enhancement over previous work in that a closer correspondence between scaling of nonlinearity and horizontal variation of bathymetry is made relative to earlier models. This results in additional terms in the nonlinear summation terms of the model, as amplitude gradient terms are required in order to formulate a consistent model. From the resulting elliptic model, a parabolic approximation is developed in order to efficiently model the equations. Comparisons between the present model, previously-formulated models, and experimental data show that the present model does evidence improvement in performance over previous models.
RESUMO
With the emergence of the coronavirus disease (COVID-19), it is essential that face masks demonstrating significant anti-droplet and hydrophobic characteristics are developed and distributed. In this study, a commercial compressed-polyurethane (C-PU) mask was modified by applying a hydrophobic and anti-droplet coating using a silica sol, which was formed by the hydrolysis of tetraethoxysilane (TEOS) under alkaline conditions and hydrolyzed hexadecyltrimethoxysilane (HDTMS) to achieve hydrophobization. The modified mask (C-PU/Si/HDTMS) demonstrated good water repellency resulting in high water contact angle (132°) and low sliding angle (17°). Unmodified and modified masks were characterized using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). A drainage test confirmed the strong interaction between the mask surface and coating. Moreover, the coating had negligible effect on the average pore size of the C-PU mask, which retained its high breathability after modification. The application of this coating is a facile approach to impart anti-droplet, hydrophobic, and self-cleaning characteristics to C-PU masks.
RESUMO
The nylon 6 nanofiber-reinforced cellulose acetate (NF-r-CA) film as a fiber-based transparent substrate is used to develop the highly transparent electrodes with excellent durable and extremely foldable properties. Mechanical properties of the NF-r-CA films are greatly improved, suggesting that the nanofibers provide an effective reinforcement. The NF-r-CA transparent films show smooth surface morphologies (RRMS ~ 27 nm) than as-spun nylon 6 nanofiber membrane, indicating the successful infiltration of cellulose acetate into the voids of nylon nanofiber membranes. The NF45-r-CA electrodes prepared using AgNWs concentration of 0.025 wt% and electrospinning time of 45 min are highly transparent (~90%), lower sheet resistance (~24 Ω sq-1) and mechanically robust (59.7 MPa). The sheet resistance of NF45-r-CA electrodes remains almost constant, and the change ratio is less than 0.01% even after a repeated bending test of 10,000 cycles (bending radius ~1 mm), whereas ITO electrode shows gradual increase in sheet resistance and then eventually no electrical signal at about 270 cycles. We also demonstrate the successful fabrication of the foldable polymer-disperse liquid crystal film utilizing highly transparent NF45-r-CA electrode, which shows outstanding working stability after bending test of 500 cycles at an extreme bending radius of 1.5 mm.
RESUMO
The aim of this study was to develop a potential process for bioethanol production from Hydrodictyon reticulatum (HR), a filamentous freshwater alga, using Saccharomyces cerevisiae (KCTC7017). From the sugar solutions prepared by the four different hydrolysis methods, bioethanol production ranged from 11.0 g/100 g dried material (acid hydrolysis) to 22.3 g/ 100 g dried material (enzymatic hydrolysis, EH). Bioethanol was fermented from a highly concentrated sugar solution obtained by a decompression-mediated (vacuum) enrichment method (VE). As the results, ethanol was more efficiently produced from HR when sugar solutions were concentrated by VE following EH (EH/VE). Using multiple feeding of the sugar solution prepared by EH/VE from HR, ethanol reached up to a concentration of 54.3 g/l, corresponding to 24.9 g/100 g dried material, which attained the economic level of product concentration (approximately 5%). The results indicate that by using HR, it is feasible to establish a bioethanol production process, which is effective for using microalgae as the raw material for ethanol production.
Assuntos
Técnicas de Cultura Celular por Lotes/métodos , Biocombustíveis , Clorófitas/metabolismo , Etanol/metabolismo , Fermentação , Saccharomyces cerevisiae/metabolismo , Biomassa , Reatores Biológicos , Hidrólise , Saccharomyces cerevisiae/efeitos dos fármacos , Açúcares/metabolismo , Açúcares/farmacologiaRESUMO
Various types of Hsp90 inhibitors have been and continue to undergo clinical investigation. One development candidate is the purine-based, synthetic Hsp90 inhibitor 1 (MPC-3100), which successfully completed a phase I clinical study. However, further clinical development of 1 was hindered by poor solubility and consequent formulation issues and promoted development of a more water soluble prodrug. Towards this end, numerous pro-moieties were explored in vitro and in vivo. These studies resulted in identification of L-alanine ester mesylate, 2i (MPC-0767), which exhibited improved aqueous solubility, adequate chemical stability, and rapid bioconversion without the need for solubilizing excipients. Based on improved physical characteristics and favorable PK and PD profiles, 2i mesylate was selected for further development. A convergent, scalable, chromatography-free synthesis for 2i mesylate was developed to support further clinical evaluation.
Assuntos
Adenina/análogos & derivados , Alanina/análogos & derivados , Antineoplásicos/síntese química , Benzodioxóis/química , Proteínas de Choque Térmico HSP90/antagonistas & inibidores , Pró-Fármacos/síntese química , Adenina/química , Adenina/farmacologia , Alanina/síntese química , Alanina/metabolismo , Alanina/farmacologia , Animais , Antineoplásicos/farmacocinética , Antineoplásicos/farmacologia , Benzodioxóis/farmacologia , Haplorrinos , Humanos , Mesilatos/síntese química , Mesilatos/farmacocinética , Mesilatos/farmacologia , Camundongos , Microssomos Hepáticos/metabolismo , Pró-Fármacos/farmacocinética , Pró-Fármacos/farmacologia , Solubilidade , ÁguaRESUMO
Hydrothermal stability of a porous nickel-supported silica membrane was successfully improved by deposition of titania multilayers on colloidal silica particles embedded in the porous nickel fiber support. Porous nickel-supported silica membranes were prepared by means of a dipping-freezing-fast drying (DFF) method. The titania layers were deposited on colloidal silica particles by repeating hydrolysis and condensation reactions of titanium isopropoxide on the silica particle surfaces. The deposition of thin titania layers on the nickel-supported silica membrane was verified by various analytical tools. The water flux and the solute rejection of the porous Ni fiber-supported silica membranes did not change after titania layer deposition, indicating that thickness of titania layers deposited on silica surface is enough thin not to affect the membrane performance. Moreover, improvement of the hydrothermal stability in the titania-deposited silica membranes was confirmed by stability tests, indicating that thin titania layers deposited on silica surface played an important role as a diffusion barrier against 90 degrees C water into silica particles.
Assuntos
Membranas Artificiais , Nanofibras/química , Nanofibras/ultraestrutura , Dióxido de Silício/química , Titânio/química , Água/química , Cristalização/métodos , Temperatura Alta , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Porosidade , Propriedades de SuperfícieRESUMO
Membrane fouling remains a critical factor limiting the widespread use of membrane processes in water and wastewater treatment. To mitigate membrane fouling, we introduced a patterned morphology on the membrane surface using a lithographic method. A modified immersion precipitation method was developed to relieve the formation of dense layer at the solvent-nonsolvent interface, that is, the opposite side of the patterned surface. Diverse patterned membranes, such as pyramid-, prism-, and embossing-patterned membranes, were prepared and compared with a flat membrane in terms of morphology, permeability, and biofouling. Patterned membrane fidelity was largely dependent on the polymer concentration in cast solution. The patterned surface augmented the water flux in proportion to the roughness factor of the patterned membrane. However, the type of pattern did not affect substantially the mean pore size on the patterned surface. Deposition of microbial cells on the patterned membrane was significantly reduced compared to that on the flat membrane in the membrane bioreactor (MBR) for wastewater treatment. This was attributed to hydraulic resistance of the apex of the patterned surface, which induced local turbulence.
Assuntos
Filtração/instrumentação , Membranas Artificiais , Eliminação de Resíduos Líquidos/métodos , Purificação da Água/métodos , Incrustação Biológica , Reatores Biológicos , Permeabilidade , Polímeros/química , Poluentes Químicos da Água/análiseRESUMO
Ab initio molecular modeling is used to design nonfluorous polymers that are potentially soluble in liquid CO2. We have used calculations to design three nonfluorous compounds meant to model the monomeric repeat units of polymers that exhibit multiple favorable binding sites for CO2. These compounds are methoxy isopropyl acetate, 2-methoxy ethoxy-propane, and 2-methoxy methoxy-propane. We have synthesized oligomers or polymers based on these small compounds and have tested their solubility in CO2. All three of these exhibit appreciable solubility in CO2. At 25 degrees C, oligo(3-acetoxy oxetane)6 is 5 wt % soluble at 25 MPa, the random copolymer (vinyl methoxymethyl ether30-co-vinyl acetate9) is 5 wt % soluble at 70 MPa and random copolymer (vinyl 1-methoxyethyl ether30-co-vinyl acetate9) is 3 wt % soluble at 120 MPa. These oligomers and polymers represent new additions to the very short list of nonfluorous CO2-soluble polymers. However, none of these are more soluble than poly(vinyl acetate), which exhibits the highest CO2 solubility of any known polymer containing only the elements C, H, and O.
RESUMO
Efforts towards developing orally bioavailable HIV-1 maturation inhibitors starting from betulinic acid 1 are described. SAR resulted in improved potency, physicochemical properties, and enhanced oral absorption in rats.
Assuntos
Fármacos Anti-HIV/síntese química , Antivirais/síntese química , Química Farmacêutica/métodos , HIV-1/metabolismo , Terpenos/química , Administração Oral , Amidas/química , Animais , Fármacos Anti-HIV/farmacologia , Antivirais/farmacologia , Desenho de Fármacos , Humanos , Concentração Inibidora 50 , Leucócitos Mononucleares/efeitos dos fármacos , Modelos Químicos , Triterpenos Pentacíclicos , Ratos , Triterpenos/química , Ácido BetulínicoRESUMO
[structure: see text] The design of a nonpeptidic scaffold based on 4,7-diphenyl-1,6-disubstituted indanes mimicking i, i+3, i+4, and i+7 residues of an alpha-helix has been described, and its synthesis has been accomplished. This strategy makes general approaches possible to helix mimetic scaffolds that could be targeted to different proteins by changing the nature of the substituents.
Assuntos
Derivados de Benzeno/química , Indanos/química , Estrutura Secundária de Proteína , Proteínas/química , Modelos Moleculares , Mimetismo Molecular , Estrutura Molecular , Proteínas/síntese químicaRESUMO
Dorsoventral patterning of the Drosophila ventral neuroectoderm is established by the expression of three evolutionarily conserved homeodomain genes: ventral nervous system defective (vnd), intermediate neuroblasts defective (ind), and muscle segment homeobox (msh) in the medial, intermediate, and lateral columns of the ventral neuroectoderm, respectively. It was not clear whether extrinsic factor(s) from the CNS midline cells influence the initial dorsoventral patterning by controlling the expression of the dorsoventral patterning genes. We show here that the CNS midline cells, specified by single-minded (sim), are essential for maintaining expression of the dorsoventral patterning genes. Ectopic expression of sim in the ventral neuroectoderm during the blastoderm stage repressed expression of the three homeodomain genes in the ventral neuroectoderm. This indicates that the identity of the CNS midline cells is established by a series of repressions of the three homeodomain genes in the ventral neuroectoderm. Ectopic expression of sim in the ventral neuroectoderm during initial neurogenesis induced ectopic ind expression in the medial column in addition to that in the intermediate column via EGFR signaling between the ventral neuroectoderm and midline cells. In contrast, it repressed the expression of vnd and msh in the medial and lateral columns, respectively. Our findings demonstrate that the CNS midline cells provide extrinsic positional information via EGFR signaling that maintains the initial subdivision of the ventral neuroectoderm into three dorsoventral columns during initial neurogenesis.
Assuntos
Sistema Nervoso Central/citologia , Drosophila/citologia , Ectoderma/citologia , Animais , Sistema Nervoso Central/embriologia , Sistema Nervoso Central/metabolismo , Drosophila/embriologia , Drosophila/metabolismo , Proteínas de Drosophila/biossíntese , Ectoderma/metabolismo , Regulação da Expressão Gênica no Desenvolvimento/fisiologiaRESUMO
BACKGROUND/AIMS: Currently, the role of liver transplantation in the treatment of hepatocellular carcinoma (HCC) with cirrhosis is controversial. What remain to be determined are the best treatment protocol and who are likely to have a good outcome after liver transplantation. METHODS: Twenty-five patients with hepatocellular carcinoma underwent liver transplantation between 1993 and 2001 at the Department of Surgery, Catholic University of Korea. The follow-up period was from one month to 51 months. The pathologic findings, the recurrence, and survival of the 25 cases were analyzed. RESULTS: Two patients had a tumor larger than 5 cm in diameter and three patient had above 3 nodules in number. Five patients had bilobar tumors. Vascular invasion was present in 11 patients (45.8%). Among the 25 patients, postsurgical TNM staging was stage III in 3 patients, stage IVA in 5 patients, and stage IVB in 1 patient. Number of high risk patients were 16 (64%). During follow-up, 23 of the 25 patients (92%) were alive and the number of disease-free survivals was 21 among the 23 patients (91.3%). CONCLUSIONS: According to our small experience, HCC can be a good indication of liver transplantation, especially in low risk patients and even in the recurrent cases. A long-term survival can be achieved by aggressive treatment. However, the best protocol remains to be determined, especially for the case with large tumors.
Assuntos
Carcinoma Hepatocelular/cirurgia , Neoplasias Hepáticas/cirurgia , Transplante de Fígado , Adulto , Idoso , Carcinoma Hepatocelular/mortalidade , Carcinoma Hepatocelular/patologia , Feminino , Humanos , Neoplasias Hepáticas/mortalidade , Neoplasias Hepáticas/patologia , Masculino , Pessoa de Meia-Idade , Fatores de Risco , Taxa de SobrevidaRESUMO
OBJECTIVE: To evaluate the stability of emulsions under different temperatures simulating clinical conditions of storage and exposure during infusion, five total nutrient admixture formulas in this institution were analyzed: adult, patients with hepatic failure, infants, stressed patients, and patients with renal failure. METHODS: Each mixture was allocated in a sterile 100-mL glass bottle, which was prefilled and refilled with nitrogen gas. Bottles were stored at 4 degrees C for 0 d, 3 d, and 7 d and then exposed to three different temperatures: usual room temperature (18 degrees C to 25 degrees C), high (>28 degrees C) in a water bath, or storage (4 degrees C) for 24 and 48 h. The gross inspection of the emulsions and parallel measurements of pH, particle sizes, divalent ions, peroxide levels, and microbial cultures were performed. RESULTS: Every lot was stable near 18 degrees C, but 8 of 10 lots stored for 7 d (25 degrees C and >28 degrees C) and 15 of 20 lots stored for 3 and 7 d (25 degrees C and >28 degrees C) showed coalescence. The overall coalescence incidences by storage, exposure, and heat were statistically significant (P < 0.005). CONCLUSION: For the safety of total nutrient admixtures, special attention is required to keep the ambient temperature below 28 degrees C and completely exclude air from the container.