Implementing microfluidic flow device model in utilizing dural substitutes as pulp capping materials for vital pulp therapy.

Vital pulp therapy (VPT) has gained prominence with the increasing trends towards conservative dental treatment with specific indications for preserving tooth vitality by selectively removing the inflamed tissue instead of the entire dental pulp. Although VPT has shown high success rates in long-term follow-up, adverse effects have been reported due to the calcification of tooth canals by mineral trioxide aggregates (MTAs), which are commonly used in VPT. Canal calcification poses challenges for accessing instruments during retreatment procedures. To address this issue, this study evaluated the mechanical properties of dural substitute intended to alleviate intra-pulp pressure caused by inflammation, along with assessing the biological responses of human dental pulp stem cells (hDPSCs) and human umbilical vein endothelial cells (HUVECs), both of which play crucial roles in dental pulp. The study examined the application of dural substitutes as pulp capping materials, replacing MTA. This assessment was conducted using a microfluidic flow device model that replicated the blood flow environment within the dental pulp. Computational fluid dynamics simulations were employed to ensure that the fluid flow velocity within the microfluidic flow device matched the actual blood flow velocity within the dental pulp. Furthermore, the dural substitutes (Biodesign; BD and Neuro-Patch; NP) exhibited resistance to penetration by 2-hydroxypropyl methacrylate (HEMA) released from the upper restorative materials and bonding agents. Finally, while MTA increased the expression of angiogenesis-related and hard tissue-related genes in HUVEC and hDPSCS, respectively, BD and NP did not alter gene expression and preserved the original characteristics of both cell types. Hence, dural substitutes have emerged as promising alternatives for VPT owing to their resistance to HEMA penetration and the maintenance of stemness. Moreover, the microfluidic flow device model closely replicated the cellular responses observed in live pulp chambers, thereby indicating its potential use as anin vivotesting platform.

Influence of Post-Curing in Nitrogen-Saturated Condition on the Degree of Conversion and Color Stability of 3D-Printed Resin Crowns.

Post-curing is the process of applying extra light to complete the polymerization process of 3D printing. The mechanical properties of light-cured three-dimensional (3D) printed resin can be improved by decreasing the oxygen concentrations during post-curing, and nitrogen-saturated post-curing has been applied for this purpose. This study aimed to evaluate and compare the color stability of 3D-printed resin crowns that were post-cured in both normal air and nitrogen-saturated conditions. Crowns were fabricated with a 3D printer and post-cured in normal air (control group; air) or nitrogen-saturated conditions (experimental group; nitrogen). The specimens in each group were subdivided into four subgroups, each exposed to different discoloration agents: distilled water, coffee, wine, and curry. Post-immersion color changes were measured using a digital spectrophotometer and analyzed using repeated-measures ANOVA. Fourier transform infrared (FT-IR) spectroscopy evaluated the degree of conversion of resin over immersion times for both post-curing conditions. Upon comparing the effects of post-curing conditions, a significant difference between the control and experimental groups in terms of immersion time in the wine and curry subgroups was found. FT-IR analysis showed a significant difference in the degree of conversion between the air and nitrogen groups from 10 to 300 s. These findings suggest that nitrogen-saturated post-curing can potentially enhance the conversion rate of 3D-printed resin crowns, thereby improving their color stability.

Evaluation of residual dentin thickness using quantitative light-induced fluorescence technology.

This study aimed to determine whether a correlation exists between residual dentin thickness and quantitative light-induced fluorescence (QLF) values and, if so, to analyze its tendencies. Forty extracted sound human molars were assigned to filled and unfilled groups. The teeth were submerged in a mold with clear acrylic resin. Red utility wax was inserted into the pulp chamber space in the filled group to simulate vital pulp. The specimen was sectioned longitudinally to observe the inside of the pulp space. The samples were cut horizontally from the highest point of the pulp space 2 mm apart. QLF images were then taken of 2 mm, 1 mm, and 0.5 mm samples using the QLF-D Biluminator™ 2 + system. Three operators independently evaluated the QLF images, and the statistical analysis was conducted using one-way analysis of variance, Pearson correlation coefficients, and intraclass correlation coefficients. In the filled group, the mean ΔF values for residual dentin thicknesses of 2 mm, 1 mm, and 0.5 mm were - 3.22, - 7.84, and - 11.52, respectively. In the unfilled group, the mean ΔF values were 0, - 6.90, and - 10.14, respectively. A positive correlation was found between residual dentin thickness and ΔF values (P < 0.05). The intraclass correlation coefficients for observations made by the three operators for the filled and unfilled groups were 0.831 and 0.917, respectively (P < 0.05). In conclusion, residual dentin thickness and ΔF values were significantly correlated and had a highly positive correlation regardless of the QLF device operator.

Effect of icariin surface treatment on the resorption of denuded roots after replantation in rat.

AIM: Limiting the incidence of resorption associated with delayed replantation of avulsed teeth is critical for long-term tooth survival. In this study, we assessed whether icariin, a natural product with anti-osteoclastic properties, could reduce root resorption in a rat model of tooth replantation. METHODOLOGY: Cytocompatibility of icariin (10, 20, 40 and 80 µM) was evaluated by CCK-8 proliferation assay in vitro, and an osteoclastogenesis assay was performed to evaluate the effect of icariin on the differentiation of rat bone marrow macrophages and human peripheral blood monocytes into tartrate-resistant acid phosphatase-stained (TRAP+ ) multinucleated giant cells (MNGCs). Differentiation of human periodontal ligament stem cells (hPDLSCs) treated with icariin (10 µM) was also evaluated at 5, 10 and 21 days of osteogenic induction. The first maxillary molars of five-week-old male Sprague-Dawley rats were extracted, denuded of PDL, then treated either with neutralized collagen solution (Carrier control) or icariin in collagen (3 µg/µL) before replantation into their sockets. The animals were euthanized 2 weeks post-surgery for micro-computed tomography (micro-CT) imaging and histological analyses. RESULTS: Icariin was cytocompatible and significantly reduced the differentiation of TRAP+ MNGCs in a dose-dependent manner compared to the control. Moreover, icariin enhanced alkaline phosphatase activity, expression of osteogenic marker genes and proteins, and calcium deposition in hPDLSCs. Micro-CT imaging of the replanted samples demonstrated a significantly higher volume of remaining roots in the icariin-treated group than in the control group. Histological analysis revealed a marked number of resorptive lacunae with TRAP activity in the control group, whereas icariin-treated samples showed signs of functional healing and reduced osteoclastic activity. CONCLUSIONS: Icariin was biocompatible and demonstrated potent anti-osteoclastic and pro-osteogenic properties that reduced resorption and promoted functional healing of denuded roots in a rat maxillary first molar model of replantation. These findings indicate that root surface treatment with icariin may be a clinically relevant and practical method for improving the retention and survival of teeth with compromised PDL after delayed replantation following traumatic avulsion.

Biological Function and Potential Applications of Garcinol in Human Dental Pulp Stem Cells.

INTRODUCTION: The regeneration of pulp tissue is crucial for true regenerative endodontic treatment, which requires a reduction in osteogenic differentiation. Garcinol, a histone acetyltransferase inhibitor, is a natural regulator that is known to suppress the osteogenic differentiation of dental pulp stem cells. In this study, the inhibitory effect of garcinol on the osteogenic differentiation of human dental pulp stem cells (hDPSCs) was evaluated using three-dimensional culture under in vitro and in vivo conditions. METHODS: hDPSCs were obtained from caries-free third molars and cultured with 10 µM garcinol for 7 days in an ultra-low attachment plate. The cell stemness and expression of osteogenic differentiation-related genes were analyzed using reverse transcription-polymerase chain reaction and single-cell analysis. A transplantation experiment was performed in mice to investigate whether garcinol-treated hDPSCs showed restrained osteogenic differentiation. RESULTS: hDPSCs cultured in the U-shaped ultra-low attachment plate showed the highest expression of stemness-related genes. Garcinol-treated hDPSCs demonstrated downregulation of osteogenic differentiation, with lower expression of bone sialoprotein, which is related to bone formation, and higher expression of dentin sialophosphoprotein, which is related to dentin formation. However, the garcinol-treated hDPSCs did not show any alterations in their stemness. Consistent results were observed in the transplantation experiment in mice. CONCLUSIONS: Garcinol reduced the osteogenic differentiation of hDPSCs, which can contribute to true regenerative endodontic treatment.

Three-dimensional accuracy of endodontic access preparations using novel nonrestrictive static guides: A laboratory study.

This study compared the accuracy of traditional endodontic access to conservative access cavities prepared with or without novel nonrestrictive endodontic access guides by operators with different levels of clinical experience without visual aids, using a three-dimensional volumetric accuracy analysis method. The accuracy of the preparations was analysed using a novel 3D volumetric analysis by calculating the intersection and volume of the actual cavities to the planned model cavities. The experienced operator significantly outperformed the inexperienced operator in the free hand groups, while accuracy of conservative access cavities prepared using the novel guides were comparable and significantly higher than the other groups (p < 0.05). The results demonstrated clinical experience enhanced endodontic preparations accuracy and that nonrestrictive guides achieve accurate conservative access cavities which are independent of the operator skill level. Additionally, the three-dimensional volumetric analysis is a consistent and objective method to judge the accuracy of guided endodontic techniques.

In vitro response of dental pulp stem cells to dural substitute grafts: Analysis of cytocompatibility and bioactivity.

AIM: The objective of this study was to assess and compare the cytocompatibility of decellularized porcine small intestine submucosal dural graft from Biodesign (BD) and polyester urethane-based Neuro-Patch (NP) dural substitute with the mineral trioxide aggregate (MTA) and the cyanoacrylate-based Histoacryl surgical adhesive. Furthermore, the study evaluated the inflammatory response and osteogenic differentiation of human dental pulp stem cells (hDPSCs) when cultured in direct contact with the dural substitutes in comparison with MTA. METHODOLOGY: The viability of hDPSCs in direct contact with the tested materials was investigated in vitro by a CCK-8 assay. Additionally, the effects of dural substitutes and MTA on the expression of the inflammatory mediator interleukin-6 (IL-6) was investigated via enzyme-linked immunosorbent assay (ELISA), whilst effects on the differentiation were evaluated using alizarin red staining, alkaline phosphatase staining, ELISA and energy-dispersive X-ray elemental mapping. RESULTS: The dural substitutes were cytocompatible and promoted cellular adhesion. The Histoacryl and MTA demonstrated cytotoxicity in fresh preparations but showed a more favourable cellular reaction when set. Investigations of biological activity indicated that dural substitute membranes did not induce an inflammatory response or osteogenic differentiation of hDPSCs. In contrast, MTA induced the expression of IL-6 and alkaline phosphatase activity contributing to enhanced differentiation and mineralization. CONCLUSIONS: The dural substitute membranes showed cytocompatibility, did not provoke an inflammatory response and maintained the stemness of hDPSCs better than MTA. Additionally, the set Histoacryl surgical adhesive demonstrated good biocompatibility. Taken together, these results highlight the potential use of dural substitutes in regenerative endodontic procedures as coronal barriers alternative to MTA to reduce the incidence of intracanal calcifications.

An Endodontic Forecasting Model Based on the Analysis of Preoperative Dental Radiographs: A Pilot Study on an Endodontic Predictive Deep Neural Network.

INTRODUCTION: This study aimed to evaluate the use of deep convolutional neural network (DCNN) algorithms to detect clinical features and predict the three-year outcome of endodontic treatment on preoperative periapical radiographs. METHODS: A database of single-root premolars that received endodontic treatment or retreatment by endodontists with presence of three-year outcome was prepared (n = 598). We constructed a 17-layered DCNN with a self-attention layer (Periapical Radiograph Explanatory System with Self-Attention Network [PRESSAN-17]), and the model was trained, validated, and tested to 1) detect 7 clinical features, that is, full coverage restoration, presence of proximal teeth, coronal defect, root rest, canal visibility, previous root filling, and periapical radiolucency and 2) predict the three-year endodontic prognosis by analyzing preoperative periapical radiographs as an input. During the prognostication test, a conventional DCNN without a self-attention layer (residual neural network [RESNET]-18) was tested for comparison. Accuracy and area under the receiver-operating-characteristic curve were mainly evaluated for performance comparison. Gradient-weighted class activation mapping was used to visualize weighted heatmaps. RESULTS: PRESSAN-17 detected full coverage restoration (area under the receiver-operating-characteristic curve = 0.975), presence of proximal teeth (0.866), coronal defect (0.672), root rest (0.989), previous root filling (0.879), and periapical radiolucency (0.690) significantly, compared to the no-information rate (P < .05). Comparing the mean accuracy of 5-fold validation of 2 models, PRESSAN-17 (67.0%) showed a significant difference to RESNET-18 (63.4%, P < .05). Also, the area under average receiver-operating-characteristic of PRESSAN-17 was 0.638, which was significantly different compared to the no-information rate. Gradient-weighted class activation mapping demonstrated that PRESSAN-17 correctly identified clinical features. CONCLUSIONS: Deep convolutional neural networks can detect several clinical features in periapical radiographs accurately. Based on our findings, well-developed artificial intelligence can support clinical decisions related to endodontic treatments in dentists.

Actuating compact wearable augmented reality devices by multifunctional artificial muscle.

An artificial muscle actuator resolves practical engineering problems in compact wearable devices, which are limited to conventional actuators such as electromagnetic actuators. Abstracting the fundamental advantages of an artificial muscle actuator provides a small-scale, high-power actuating system with a sensing capability for developing varifocal augmented reality glasses and naturally fit haptic gloves. Here, we design a shape memory alloy-based lightweight and high-power artificial muscle actuator, the so-called compliant amplified shape memory alloy actuator. Despite its light weight (0.22 g), the actuator has a high power density of 1.7 kW/kg, an actuation strain of 300% under 80 g of external payload. We show how the actuator enables image depth control and an immersive tactile response in the form of augmented reality glasses and two-way communication haptic gloves whose thin form factor and high power density can hardly be achieved by conventional actuators.

Single-Cell RNA Sequencing Analysis of Human Dental Pulp Stem Cell and Human Periodontal Ligament Stem Cell.

INTRODUCTION: Many studies have investigated the transcriptome profiles of dental stem cells for regenerative medicine. However, such studies use bulk RNA and do not consider cell-level heterogeneity. Here, we investigated the characteristics and heterogeneity of human dental pulp stem cells (hDPSCs) and human periodontal ligament stem cells (hPDLSCs) at the single-cell level and examined the differences between them. METHODS: hDPSCs and hPDLSCs were obtained from caries-free premolars (n = 2). Single-cell RNA sequencing of hDPSCs and hPDLSCs was performed using a Single Emulsion Systems (Dolomite Microfluidics, Royston, UK) droplet microfluidic device and the Illumina NextSeq550 system (Illumina, San Diego, CA). Data alignment was performed using STAR v2.4.0, and further analysis was performed using the Seurat, singleR, and clusterProfiler packages in R (R Foundation for Statistical Computing, Vienna, Austria). RESULTS: hDPSCs and hPDLSCs were separated into 3 clusters. hDPSCs mainly exhibited osteogenic and neurogenic cell populations. The main populations of hPDLSCs comprised osteogenic and myofibroblastic populations. hPDLSCs showed high "scores" for osteogenic gene expression, whereas hDPSCs had high neurogenic and endogenic scores. CONCLUSIONS: Single-cell RNA sequencing of hDPSCs and hPDLSCs revealed that the genes were expressed in specific clusters. The results of these analyses can be used as reference databases and valuable resources for further research in dental therapeutics.

Evaluation of the International Society for Cutaneous Lymphoma Algorithm for the Diagnosis of Early Mycosis Fungoides.

The International Society for Cutaneous Lymphoma (ISCL) proposes a diagnostic algorithm for early mycosis fungoides (MF) that includes clinical, histological, immunophenotypical, and molecular criteria. Here, we analyzed the immunologic markers and features of T-cell clonality in 38 early MF cases and 22 non-MF cases to validate the ISCL algorithm. We found that CD5 and CD7 expression differed significantly between early MF and non-MF cases, with epidermal discordance of CD7 expression more frequently identified in early MF. Notably, increasing the cut-off value for CD7 expression from 10% to 22.5% improved its sensitivity. Furthermore, TCR-γ and ß chain rearrangements were more frequently detected in early MF than in non-MF cases. Based on these findings, we propose CD5 and CD7 deficiency as mandatory immunopathologic criteria and PCR-based testing for TCR-γ and ß chains as required molecular/biologic criteria to improve the efficiency of early MF diagnosis using the ISCL algorithm.

Antioxidant and Anti-Inflammatory Effect and Probiotic Properties of Lactic Acid Bacteria Isolated from Canine and Feline Feces.

Oxidative stress is a phenomenon caused by an imbalance between the production of reactive oxygen species and antioxidant defenses. It plays an important role in numerous disease states, including chronic kidney disease, neurological disorders, cardiovascular diseases, diabetes, and cancer. Lactic acid bacteria (LAB) are known to have prominent antioxidant properties. Therefore, this study aimed to measure the antioxidant activity and anti-inflammatory potential of LAB isolated from animals for the efficient use of probiotics with host specificity. Antioxidant activity measurements of sixteen strains revealed that ABTS radical scavenging activities ranged from 26.3 to 57.4%, and DPPH free radical scavenging activities ranged from 4.7 to 13.5%. Based on the antioxidant activity assessment, five strains (Enterococcus faecium MG9003(YH9003), Enterococcus faecium MG9007(YH9007), Lactobacillus reuteri MG9012(YH9012), Lactobacillus fermentum MG9014(YH9014), and Pediococcus pentosaceus MG9015(YH9015)) were selected with the consideration of fermentation productivity (>1 × 109 CFU/g). The selected strains exhibited nitric oxide inhibition and inhibited inducible nitric oxide synthase and cyclooxygenase expression. Furthermore, probiotic properties, including intestinal adhesion and stability, were identified. Our results show that the selected animal-derived strains can be effective probiotic candidates for potential effects on animal hosts.

The Effect of Mechanical Vibration on Osteogenesis of Periodontal Ligament Stem Cells.

INTRODUCTION: Appropriate occlusal forces can prevent ankylosis after tooth replantation or transplantation. However, the "proper occlusal forces" on periodontal ligament (PDL) healing have not yet been defined due to insufficient in vitro studies and uncertain in vitro models. Herein, we presented a mechanical vibration device as an in vitro model to determine such favorable occlusal forces. METHODS: Human periodontal ligament stem cells (hPDLSCs) were exposed to mechanical vibration force with 4 frequencies (30, 90, 150, and 210 rpm). Cell viability and the expression of osteogenic differentiation-related genes and proteins were tested in vitro. The calvarial transplantation experiment was performed to assess the bone formation ability of 150 rpm mechanical vibration stimulation (MVS). RESULTS: MVS at 150 and 210 rpm significantly reduced cell viability in the early stages. The 150-rpm MVS decreased osteogenic marker expression at the early time point (3 days) but had no harmful effects at the late time point (14 days). Furthermore, hPDLSC cell sheets treated with 150-rpm MVS had potential to decrease bone formation in rat calvarial defects serendipitously and facilitated functional PDL-like tissue formation. CONCLUSIONS: We found that MVS at a frequency of 150 rpm could provide a strategy for a transient reduction in the osteogenic potential of hPDLSCs and promote PDL-like tissue formation. Thus, 150-rpm MVS could be used as a controllable proper occlusal force to prevent ankylosis and promote PDL healing after tooth replantation or transplantation.

Preserving the vitality of teeth adjacent to a large radicular cyst in periapical microsurgery: a case report with 4-year follow-up.

BACKGROUND: Radicular cysts may enlarge considerably, cause extensive bone destruction, and jeopardize the integrity of the associated vital teeth. The different treatment approaches are aimed mainly at eliminating the cystic epithelial membrane while reducing the risk of injury to vital structures. Contrary to other treatment modalities, preapical surgery offers an unequivocal single occasion resolution for the patient. However, it has been associated with higher risk of collateral damages. CASE PRESENTATION: A patient presented with a large radicular cyst originating from a maxillary lateral incisor. The adjacent central and canine teeth initially failed to exhibit responses to sensibility tests but showed signs of vitality. Microsurgical management was aimed at enucleating the cystic membrane while maintaining adjacent teeth vitality. Upon careful and controlled cyst enucleation under the dental operating microscope, the neurovascular bundle of one of the involved teeth was visualized and its integrity was maintained throughout the procedure. RESULTS: The procedure was successful and follow up recalls revealed recovery of normal sensibility of tooth 11 and 13 with complete bone regeneration around their apices. CONCLUSION: Within the limitation of the present case report, we demonstrated that complete excision of large periapical cyst can be performed without sacrificing the vitality of the adjacent teeth, by preserving the integrity of their neurovascular supply through controlled microsurgical enucleation, and by a potential apical vascular repair ensuing unintended injury. Diagnosing the pulp vitality of non-offending teeth whose apices protrude into the cystic lumen is a complex process and can be misleading. Pressure from the growing cyst can inhibit vital teeth responses to neural-based sensibility tests leading to false negative results. Thus, in such cases, the use of blood perfusion-based vitality testing is recommended for correct initial diagnosis.

Volume Percentage of Filling Voids in Root Canals Prepared by a Novel Nickel-Titanium Rotary System (TruNatomy) Using Two Different Obturation Techniques.

This study aimed to compare the volume percentage of filling voids in root canals prepared with a newly introduced rotary system, TruNatomy (Dentsply Maillefer), and obturated by the modified continuous wave (CW) or single cone (SC) filling technique. Plastic tooth models with four canals were enlarged by using TruNatomy files and randomly allocated into either the CW or SC group. The volume percentage of filling voids at 1-6 mm from the apex was analyzed by using microcomputed tomography; mean values were compared by using independent two-sample t-tests (p < 0.05). The mean volume percentages of the filling voids were 2.81 ± 1.11% and 1.77 ± 0.82% in the CW and SC groups, respectively. In the apical area (1-4 mm), volume percentages in the palatal were significantly different between the CW and SC groups; in the middle area (4-6 mm), volume percentages in the palatal and the second mesiobuccal canals were significantly different (p < 0.05). The SC group showed lower volume percentages of filling voids than the CW group. The canals prepared by the TruNatomy system can be obturated well by both the SC and CW techniques. The SC technique showed a lower number of voids, especially in the palatal canals.

Survival and prognostic factors of managing cracked teeth with reversible pulpitis: A 1- to 4-year prospective cohort study.

AIM: This prospective clinical study evaluated the clinical performance of managing cracked teeth with reversible pulpitis through a combination of internal and external splinting and investigated factors that can affect pulp survival after splinting. METHODOLOGY: Thirty-four teeth diagnosed with cracks and reversible pulpitis were enrolled and treated with bidirectional crack splinting: 1) immediate splinting with a stainless-steel band, 2) internal splinting with crack line removal and resin filling and 3) external splinting with a temporary crown followed by final crown placement. If the symptoms remained/recurred, root canal treatment was performed. Patients were followed up at 3, 6 and 12 months, then annually thereafter. Kaplan-Meier survival analysis to calculate the survival of the treated teeth and Cox univariate proportional hazards regression model to investigate prognostic factors were performed. RESULTS: Twenty-nine (97%) teeth were followed up for up to 4 years. The pulp survival rate was 72% after banding and 91% after final crown cementation. No tooth was extracted (100% tooth survival rate). In the univariate Cox proportional hazard test, pain on percussion was the only statistically significant factor (hazard ratio = 11.77). Teeth with pain on percussion at the first visit had a pulp survival rate of 46% during the follow-up period. In comparison, their counterparts without pain had a 94% pulp survival rate. CONCLUSIONS: Bidirectional splinting successfully managed cracked teeth with reversible pulpitis. Pain on percussion (mechanical allodynia) may be an important factor in deciding whether to attempt root canal treatment on symptomatic cracked teeth. A step-by-step approach with bidirectional crack splinting should be encouraged for a cracked tooth with a vital pulp without mechanical allodynia rather than pre-emptive root canal treatment.

Isolation and Characterization of Effective Bacteria That Reduce Ammonia Emission from Livestock Manure.

Ammonia from livestock manure reacts with chemical components discharged from various emission sources to produce airborne particulate matter. This study aimed to investigate a novel effective microbial agent to suppress ammonia gas emitted from manure. Both isolated L12I and 12III strains, identified as Pediococcus acidilactici (PA), were selected for their superior activity in assays performed with the evaluation criteria such as acid production, ammonia decomposition, and urease inhibition, which are key factors influencing ammonia excretion. The survivability of PA strains was confirmed by an increase in DNA abundance in the manure. PA strains lowered the pH of manure and suppressed the growth of hyper-ammonia-producing bacteria (HAB) possessing urease activity. The L12I and 12III treatment groups showed 23.58% and 38.00% emission reductions, respectively. Especially, the 12III strain was proven to be the more effective strain for reducing ammonia gas emission, with the best ability to reduce pH and inhibit HAB. The strains could have an additive effect in improving the manure quality as a nitrogen fertilizer by preserving the total nitrogen and urea content. These results suggest that PA strains can be used as unprecedented microbial agents to improve manure-derived environmental pollution and improve fertilizer quality.

Comparison of Biocompatibility of Calcium Silicate-Based Sealers and Epoxy Resin-Based Sealer on Human Periodontal Ligament Stem Cells.

The aim of this study was to evaluate the biocompatibility of calcium silicate-based sealers (CeraSeal and EndoSeal TCS) and epoxy resin-based sealer (AH-Plus) in terms of cell viability, inflammatory response, expression of mesenchymal phenotype, osteogenic potential, cell attachment, and morphology, of human periodontal ligament stem cells (hPDLSCs). hPDLSCs were acquired from the premolars (n = 4) of four subjects, whose ages extended from 16 to 24 years of age. Flow cytometry analysis showed stemness of hPDLSCs was maintained in all materials. In cell viability test, AH-Plus showed the lowest cell viability, and CeraSeal showed significantly higher cell viability than others. In ELISA test, AH-Plus showed higher expression of IL-6 and IL-8 than calcium silicate-based sealers. In an osteogenic potential test, AH-Plus showed a lower expression level than other material; however, EndoSeal TCS showed a better expression level than others. All experiments were repeated at least three times per cell line. Scanning electronic microscopy studies showed low degree of cell proliferation on AH-Plus, and high degree of cell proliferation on calcium silicate-based sealers. In this study, calcium silicate-based sealers appear to be more biocompatible and less cytotoxic than epoxy-resin based sealers.

A One-Year Radiographic Healing Assessment after Endodontic Microsurgery Using Cone-Beam Computed Tomographic Scans.

This study aimed to evaluate one-year radiographic healing after endodontic microsurgery using CBCT with modified PENN 3D criteria and to compare the outcome with results evaluated using Molven's criteria. A total of 107 teeth from 96 patients were evaluated one year after endodontic microsurgery by using CBCT scans with modified PENN 3D criteria and periapical radiographs with Molven's criteria. Both preoperative and postoperative lesion volumes were calculated using ITK-SNAP (free software). Radiographic healing assessment using periapical radiographs and CBCT images, and preoperative and postoperative lesion volume measurements were performed independently by two examiners. The assessment using Molven's criteria resulted in 75 complete healings, 18 incomplete healings, eight uncertain healings, and six unsatisfactory healings. Based on modified PENN 3D criteria, 64 teeth were categorized as complete healing, 29 teeth as limited healing, six teeth as uncertain healing, and eight teeth as unsatisfactory healing. With the one-year follow-up, CBCT scans showed a lower healing tendency than did periapical radiography. The volumes of apical radiolucency after the surgery were reduced by 77.7% on average at one-year follow up.

The application of "bone window technique" using piezoelectric saws and a CAD/CAM-guided surgical stent in endodontic microsurgery on a mandibular molar case.

Apical surgery for a mandibular molar is still challenging for many reasons. This report describes the applications of computer-guided cortical 'bone-window technique' using piezoelectric saws that prevented any nerve damage in performing endodontic microsurgery of a mandibular molar. A 49-year-old woman presented with gumboil on tooth #36 (previously endodontically treated tooth) and was diagnosed with chronic apical abscess. Periapical lesions were confirmed using cone-beam computed tomography (CBCT). Endodontic microsurgery for the mesial and distal roots of tooth #36 was planned. Following the transfer of data of the CBCT images and the scanned cast to an implant surgical planning program, data from both devices were merged. A surgical stent was designed, on the superimposed three-dimensional model, to guide the preparation of a cortical window on the buccal side of tooth #36. Endodontic microsurgery was performed with a printed surgical template. Minimal osteotomy was required and preservation of the buccal cortical plate rendered this endodontic surgery less traumatic. No postoperative complications such as mental nerve damage were reported. Window technique guided by a computer-aided design/computer-aided manufacture based surgical template can be considerably useful in endodontic microsurgery in complicated cases.