Clinical Validation of Face-Fit Surface-Lighting Micro Light-Emitting Diode Mask for Skin Anti-Aging Treatment.

Photobiomodulation therapy based on micro light-emitting diodes (µLEDs) holds remarkable potential for the beauty industry. Here, a cosmetically effective face-fit surface-lighting µLED mask for skin anti-aging is introduced. The face-conformable mask enables deep tissue treatment through proximal light irradiation, with a 3D origami structure capable of adapting to complex facial contours with closed adherence. A blister-assisted laser transfer achieves rapid and accurate µLEDs transfer at a high throughput of 50 chips per second, facilitating a mass-producible and large-area process. Finally, clinical trials demonstrate significant improvements in elasticity, sagging, and wrinkles across six facial areas, with a maximum enhancement of 340% in deep skin elasticity of the perioral area compared to the conventional LED mask group.

Light-Material Interactions Using Laser and Flash Sources for Energy Conversion and Storage Applications.

This review provides a comprehensive overview of the progress in light-material interactions (LMIs), focusing on lasers and flash lights for energy conversion and storage applications. We discuss intricate LMI parameters such as light sources, interaction time, and fluence to elucidate their importance in material processing. In addition, this study covers various light-induced photothermal and photochemical processes ranging from melting, crystallization, and ablation to doping and synthesis, which are essential for developing energy materials and devices. Finally, we present extensive energy conversion and storage applications demonstrated by LMI technologies, including energy harvesters, sensors, capacitors, and batteries. Despite the several challenges associated with LMIs, such as complex mechanisms, and high-degrees of freedom, we believe that substantial contributions and potential for the commercialization of future energy systems can be achieved by advancing optical technologies through comprehensive academic research and multidisciplinary collaborations.

Microwave-transparent metallic metamaterials for autonomous driving safety.

Maintaining the surface transparency of protective covers using transparent heaters in extreme weather is imperative for enhancing safety in autonomous driving. However, achieving both high transmittance and low sheet resistance, two key performance indicators for transparent heaters, is inherently challenging. Here, inspired by metamaterial design, we report microwave-transparent, low-sheet-resistance heaters for automotive radars. Ultrathin (approximately one ten-thousandth of the wavelength), electrically connected metamaterials on a millimetre-thick dielectric cover provide near-unity transmission at specific frequencies within the W band (75-110 GHz), despite their metal filling ratio exceeding 70 %. These metamaterials yield the desired phase delay to adjust Fabry-Perot resonance at each target frequency. Fabricated microwave-transparent heaters exhibit exceptionally low sheet resistance (0.41 ohm/sq), thereby heating the dielectric cover above 180 °C at a nominal bias of 3 V. Defrosting tests demonstrate their thermal capability to swiftly remove thin ice layers in sub-zero temperatures.

Universal selective transfer printing via micro-vacuum force.

Transfer printing of inorganic thin-film semiconductors has attracted considerable attention to realize high-performance soft electronics on unusual substrates. However, conventional transfer technologies including elastomeric transfer printing, laser-assisted transfer, and electrostatic transfer still have challenging issues such as stamp reusability, additional adhesives, and device damage. Here, a micro-vacuum assisted selective transfer is reported to assemble micro-sized inorganic semiconductors onto unconventional substrates. 20 µm-sized micro-hole arrays are formed via laser-induced etching technology on a glass substrate. The vacuum controllable module, consisting of a laser-drilled glass and hard-polydimethylsiloxane micro-channels, enables selective modulation of micro-vacuum suction force on microchip arrays. Ultrahigh adhesion switchability of 3.364 × 106, accomplished by pressure control during the micro-vacuum transfer procedure, facilitates the pick-up and release of thin-film semiconductors without additional adhesives and chip damage. Heterogeneous integration of III-V materials and silicon is demonstrated by assembling microchips with diverse shapes and sizes from different mother wafers on the same plane. Multiple selective transfers are implemented by independent pressure control of two separate vacuum channels with a high transfer yield of 98.06%. Finally, flexible micro light-emitting diodes and transistors with uniform electrical/optical properties are fabricated via micro-vacuum assisted selective transfer.

Vertically Integrated CMOS Ternary Logic Device with Low Static Power Consumption and High Packing Density.

A ternary logic system to realize the simplest multivalued logic architecture can enhance energy efficiency compared to a binary logic system by reducing the number of transistors and interconnections. For the ternary logic system, a ternary logic device to harness three stable states is needed. In this study, a vertically integrated complementary metal-oxide-semiconductor ternary logic device is demonstrated by monolithically integrating a thin-film transistor (TFT) over a transistor-based threshold switch (TTS). Because the TFT and the TTS have their own source (S), drain (D), and gate (G), there are physically six electrodes. But the hybrid ternary logic device of the TFT over the TTS has only four electrodes: S, D, GTFT, and GTTS like a single MOSFET. It is because the D of the underlying TTS is electrically tied with the S of the superjacent TFT. By combining an on- and off-state of the TFT and the TTS, ternary logic values of low current ("0"-state), middle current ("1"-state), and high current ("2"-state) are realized. Particularly, static power consumption at the "1"-state is decreased by employing the TTS with low off-state leakage current compared to previously reported other ternary logic devices. In addition, a footprint of the ternary logic device with the vertically overlaying structure that has a framework of "one over the other" can be lowered by roughly twice compared to that with the laterally deployed structure that has an organization of "one alongside the other".

3D Neuromorphic Hardware with Single Thin-Film Transistor Synapses Over Single Thin-Body Transistor Neurons by Monolithic Vertical Integration.

Neuromorphic hardware with a spiking neural network (SNN) can significantly enhance the energy efficiency for artificial intelligence (AI) functions owing to its event-driven and spatiotemporally sparse operations. However, an artificial neuron and synapse based on complex complementary metal-oxide-semiconductor (CMOS) circuits limit the scalability and energy efficiency of neuromorphic hardware. In this work, a neuromorphic module is demonstrated composed of synapses over neurons realized by monolithic vertical integration. The synapse at top is a single thin-film transistor (1TFT-synapse) made of poly-crystalline silicon film and the neuron at bottom is another single transistor (1T-neuron) made of single-crystalline silicon. Excimer laser annealing (ELA) is applied to activate dopants for the 1TFT-synapse at the top and rapid thermal annealing (RTA) is applied to do so for the 1T-neuron at the bottom. Internal electro-thermal annealing (ETA) via the generation of Joule heat is also used to enhance the endurance of the 1TFT-synapse without transferring heat to the 1T-neuron at the bottom. As neuromorphic vision sensing, classification of American Sign Language (ASL) is conducted with the fabricated neuromorphic module. Its classification accuracy on ASL is ≈92.3% even after 204 800 update pulses.

Flash-Induced High-Throughput Porous Graphene via Synergistic Photo-Effects for Electromagnetic Interference Shielding.

Porous 2D materials with high conductivity and large surface area have been proposed for potential electromagnetic interference (EMI) shielding materials in future mobility and wearable applications to prevent signal noise, transmission inaccuracy, system malfunction, and health hazards. Here, we report on the synthesis of lightweight and flexible flash-induced porous graphene (FPG) with excellent EMI shielding performance. The broad spectrum of pulsed flashlight induces photo-chemical and photo-thermal reactions in polyimide films, forming 5 × 10 cm2-size porous graphene with a hollow pillar structure in a few milliseconds. The resulting material demonstrated low density (0.0354 g cm-3) and outstanding absolute EMI shielding effectiveness of 1.12 × 105 dB cm2 g-1. The FPG was characterized via thorough material analyses, and its mechanical durability and flexibility were confirmed by a bending cycle test. Finally, the FPG was utilized in drone and wearable applications, showing effective EMI shielding performance for internal/external EMI in a drone radar system and reducing the specific absorption rate in the human body.

Ultrathin Metal Film on Graphene for Percolation-Threshold-Limited Thermal Emissivity Control.

Translucent Au/graphene hybrid films are shown to be effective in reducing thermal emission from the underlying surfaces when the deposition thickness of Au is close to the percolation threshold. The critical Au deposition thickness for an abrupt change in emissivity is reduced from 15 nm (Si substrate) to a percolation-threshold-limited thickness of 8.5 nm (graphene/Si substrate) because of the chemical inertness of graphene leading to the deposited Au atoms forming a thin, crystalline layer. The effect of the graphene layer on the optical properties of the hybrid film is highlighted by a drastic increase in infrared absorptivity, whereas the visible absorptivity is marginally affected by the presence of a graphene layer. The level of thermal emission from the Au/graphene hybrid films with the percolation-threshold-limited Au thickness is stable even with high background temperatures of up to 300 °C and mechanical strains of ≈4%. As an example of a thermal management application, an anti-counterfeiting device is demonstrated; thermal-camouflage-masked text fabricated with an Au/graphene hybrid film is discernible only using a thermographic camera. Ultrathin metal film assisted by a graphene layer will provide a facile platform for thermal management with semi-transparency, flexibility, and transferability to arbitrary surfaces.

Anti-inflammatory role of Artemisia argyi methanol extract by targeting the caspase-11 non-canonical inflammasome in macrophages.

ETHNOPHARMACOLOGICAL RELEVANCE: Artemisia argyi possesses pharmacological activities against various immunopathological conditions associated with inflammation. AIM OF THE STUDY: This study explored the inhibitory role of Artemisia argyi methanol extract (Aa-ME) in inflammatory responses and the underlying mechanism in macrophages. MATERIALS AND METHODS: Caspase-11 non-canonical inflammasome was activated in J774A.1 macrophage by Pam3CSK4 treatment and lipopolysaccharide (LPS) transfection. Aa-ME-mediated in vitro anti-inflammatory action was examined using MTT assay, lactate dehydrogenase (LDH) activity assay, enzyme-linked immunosorbent assay (ELISA), nitric oxide (NO) generation assay, and quantitative real-time polymerase chain reaction (qPCR). Aa-ME-mediated in vivo anti-inflammatory action was examined in LPS-stimulated lethal septic mice. RESULTS: Aa-ME inhibited caspase-11 non-canonical inflammasome-stimulated pyroptosis and the secretion of IL-1ß and IL-18 in J774A.1 macrophages. Aa-ME also inhibited NO generation by downregulating inducible NO synthase (iNOS) expression in LPS-primed and caspase-11 non-canonical inflammasome-triggered J774A.1 cells. The mechanism study revealed Aa-ME suppressed the auto-proteolytic activation of caspase-11 and gasdermin D (GSDMD) in J774A.1 cells and also interfered with caspase-11-mediated direct recognition of LPS. Moreover, Aa-ME alleviated LPS-induced lethal sepsis in mice by increasing their survival rate without significant toxicity. CONCLUSION: These results suggest a novel mechanism by which Aa-ME alleviates inflammatory responses by deactivating caspase-11 non-canonical inflammasome in macrophages.

High-index-contrast photonic structures: a versatile platform for photon manipulation.

In optics, the refractive index of a material and its spatial distribution determine the characteristics of light propagation. Therefore, exploring both low- and high-index materials/structures is an important consideration in this regard. Hollow cavities, which are defined as low-index bases, exhibit a variety of unusual or even unexplored optical characteristics and are used in numerous functionalities including diffraction gratings, localised optical antennas and low-loss resonators. In this report, we discuss the fabrication of hollow cavities of various sizes (0.2-5 µm in diameter) that are supported by conformal dielectric/metal shells, as well as their specific applications in the ultraviolet (photodetectors), visible (light-emitting diodes, solar cells and metalenses), near-infrared (thermophotovoltaics) and mid-infrared (radiative coolers) regions. Our findings demonstrate that hollow cavities tailored to specific spectra and applications can serve as versatile optical platforms to address the limitations of current optoelectronic devices. Furthermore, hollow cavity embedded structures are highly elastic and can minimise the thermal stress caused by high temperatures. As such, future applications will likely include high-temperature devices such as thermophotovoltaics and concentrator photovoltaics.

Cooling Metals via Gap Plasmon Resonance.

We report highly emissive and radiatively cooled metallic surfaces that sustain multiple and high-amplitude gap plasmon cavity modes within the principal thermal radiation spectrum at room temperature (i.e., 8-13 µm). A square-lattice array of Cu/ZnS/Cu gap plasmon cavities with five different widths was designed to avoid the near-field coupling between adjacent cavities and the anticrossing of a cavity mode and the first diffraction mode. The gap plasmon cavities fabricated on a Si substrate exhibited an effective emissivity of >0.62, up to an incidence of 60°. Outdoor solar heating experiments showed that the Cu/ZnS/Cu multicavity array lowered the Si substrate temperature by 4 °C at a maximum solar irradiance of 800 W/m2, which is equivalent to a near-one-sun intensity, relative to a planar Cu/ZnS/Cu multilayer. Such mid-infrared spectrum management of metals enables heat dissipation via radiation, which will be further utilized for designing electrodes that cool optoelectronic devices with the same metal/dielectric/metal configuration.

Association of Vitamin D Deficiency with Diabetic Nephropathy.

BACKGROUND: Low 25-hydroxyvitamin D (25OHD) levels are associated with the incidence of type 2 diabetes mellitus (T2DM). However, the association between 25OHD and metabolic health status or diabetic complications is inconclusive. We evaluated this relationship between vitamin D status and metabolic parameters and complications of T2DM. METHODS: This study included 1,392 patients with T2DM who visited Eulji and Ewha Diabetes Center between January 2011 and August 2016. Anthropometric parameters and laboratory tests including glycated hemoglobin (HbA1c), lipid profile, liver and kidney function, and urinary albumin-to-creatinine ratio (UACR) were evaluated. Diabetic macro- and microvascular complications were determined through a medical record review. Serum 25OHD concentrations were measured by chemiluminescent immunoassay. RESULTS: The mean 25OHD level was 16.8±9.6 ng/mL. Vitamin D deficiency (<20 ng/mL) and severe deficiency (<10 ng/mL) were observed in 990 (71.1%) and 351 (25.2%) participants, respectively. 25OHD level was positively correlated with age and highdensity lipoprotein cholesterol (HDL-C) level and negatively correlated with HbA1c, triglyceride level, and UACR. HDL-C and UACR were significantly associated with 25OHD after adjusting for other variables. Vitamin D deficiency was independently related to nephropathy after adjusting for confounding variables. CONCLUSION: Vitamin D deficiency was common among Korean T2DM patients; it was independently associated with microalbuminuria and HDL level, and positively related to diabetic nephropathy.

Tuning of polarized room-temperature thermal radiation based on nanogap plasmon resonance.

When a one-dimensional (1D) metal array is coupled to a planar metal mirror with a dielectric gap, localized plasmon resonance is excited inside the gap at a specific polarization of light in free space. Herein, we report on the completely polarized, mid-infrared thermal radiation that is released from gap plasmon resonators with a nanometer-thick dielectric. We fabricated nanogap plasmon resonators with 1D Au or Ni array of various widths (w) using laser interference lithography. An atomic layer deposition process was used to introduce a 10 nm-thick alumina gap between a 1D metal array and a planar metal mirror. It was observed that only for the Au nanogap plasmon resonators, high-amplitude absorption peaks that were attributed to gap plasmon modes with different orders appeared at discrete wavelengths in a polarization-resolved spectrum. In addition, all the pronounced peaks were gradually redshifted with increasing w. At w = 1.2-1.6 µm, the fundamental gap plasmon mode was tuned to the main wavelengths (8-9 µm) of thermal radiation at room temperature (e.g., ∼300 K), which led to polarization-selective camouflage against standard infrared thermal imaging. The results of electromagnetic simulations quantitatively agreed with the measured absorbance spectra in both peak wavelength and amplitude. We believe that these experimental efforts towards achieving radiation/absorption spectra tailored at mid-infrared wavelengths will be further exploited in thermal-radiation harnessed energy devices, spectroscopic sensors, and radiative coolers.

Integrated ray-wave optics modeling for macroscopic diffractive lighting devices.

We studied a high-accuracy hybrid optics modeling for macroscopic lighting devices containing highly diffractive elements. For a two-dimensional (2D) grating, we achieved forward and backward diffraction distributions at omnidirectional incidence by conducting rigorous coupled-wave analysis and then assigned the diffuse information to a virtual, planar surface in a ray-optics model. By using the integrated ray-wave optics simulation, we obtained extraction efficiencies and far-field distributions of millimeter-scale (0.5 × 0.5 × 0.1 mm3) flip-chip GaN-based light-emitting diodes (LEDs) with embedded 2D gratings. The increased index contrast of 2D gratings progressively improved the extraction of light via the top face of the substrates, thus inducing a vertical beaming effect that strongly supported measured data. The outcoupling features related to the index contrast of gratings were understood by performing Fourier analysis; a high-index-contrast grating preferred to excite high-order diffraction modes, thereby effectively converting tightly bound waveguide modes into leaky light through the top escape route. The simulation strategy developed herein will be essential for designing directional illuminations and micro-LED displays.

Optical Tunneling Mediated Sub-Skin-Depth High Emissivity Tungsten Radiators.

Tailoring the spectrum of thermal radiation at high temperatures is a central issue in the study of thermal radiation harnessed energy resources. Although bulk metals with periodic cavities incorporated into their surfaces provide high emissivity, they require a complicated micron metal etch, thereby precluding reliable, continuous operation. Here, we report thermally stable, highly emissive, ultrathin (<20 nm) tungsten (W) radiators that were prepared in a scalable and cost-effective route. Alumina/W/alumina multiwalled, submicron cavity arrays were fabricated sequentially using nanoimprinting lithography, thin film deposition, and calcination processes. To highlight the practical importance of high-temperature radiators, we developed a thermophotovoltaic (TPV) system equipped with fabricated W radiators and low-bandgap GaSb photovoltaic cells. The TPV system produced electric power reliably during repeated temperature cycling between 500 and 1200 K; the power density at 1200 K was fixed to be approximately 1.0 W/cm2. The temperature-dependent electric power was quantitatively reproduced using a one-dimensional energy conversion model. The symmetric configuration of alumina/W/alumina multiwall together with the presence of a void inside each cavity alleviated thermal stress, which was responsible for the stable TPV performance. The short-current-density (JSC) of developed TPV system was augmented significantly by decreasing the W thickness below its skin depth. A 17 nm thick W radiator yielded a 32% enhancement in JSC compared to a 123 nm thick W radiator. Electromagnetic analysis indicated that subskin-depth W cavity arrays led to suppressed surface reflection due to the mitigated screening effect of free electrons, thereby enhancing the absorption of light within each W wall. Such optical tunneling-mediated absorption or radiation was valid for any metal material and morphology (e.g., planar or patterned).

RetainVis: Visual Analytics with Interpretable and Interactive Recurrent Neural Networks on Electronic Medical Records.

We have recently seen many successful applications of recurrent neural networks (RNNs) on electronic medical records (EMRs), which contain histories of patients' diagnoses, medications, and other various events, in order to predict the current and future states of patients. Despite the strong performance of RNNs, it is often challenging for users to understand why the model makes a particular prediction. Such black-box nature of RNNs can impede its wide adoption in clinical practice. Furthermore, we have no established methods to interactively leverage users' domain expertise and prior knowledge as inputs for steering the model. Therefore, our design study aims to provide a visual analytics solution to increase interpretability and interactivity of RNNs via a joint effort of medical experts, artificial intelligence scientists, and visual analytics researchers. Following the iterative design process between the experts, we design, implement, and evaluate a visual analytics tool called RetainVis, which couples a newly improved, interpretable, and interactive RNN-based model called RetainEX and visualizations for users' exploration of EMR data in the context of prediction tasks. Our study shows the effective use of RetainVis for gaining insights into how individual medical codes contribute to making risk predictions, using EMRs of patients with heart failure and cataract symptoms. Our study also demonstrates how we made substantial changes to the state-of-the-art RNN model called RETAIN in order to make use of temporal information and increase interactivity. This study will provide a useful guideline for researchers that aim to design an interpretable and interactive visual analytics tool for RNNs.

An Optically Flat Conductive Outcoupler Using Core/Shell Ag/ZnO Nanochurros.

Transparent conductive electrodes (TCEs) featuring a smooth surface are indispensable for preserving pristine electrical characteristics in optoelectronic and transparent electronic devices. For high-efficiency organic light emitting diodes (OLEDs), a high outcoupling efficiency, which is crucial, is only achieved by incorporating a wavelength-scale undulating surface into a TCE layer, but this inevitably degrades device performance. Here, an optically flat, high-conductivity TCE composed of core/shell Ag/ZnO nanochurros (NCs) is reported embedded within a resin film on a polyethylene terephthalate substrate, simultaneously serving as an efficient outcoupler and a flexible substrate. The ZnO NCs are epitaxially grown on the {100} planes of a pentagonal Ag core and the length of ZnO shells is precisely controlled by the exposure time of Xe lamp. Unlike Ag nanowires films, the Ag/ZnO NCs films markedly boost the optical tunneling of light. Green-emitting OLEDs (2.78 × 3.5 mm2 ) fabricated with the Ag/ZnO TCE exhibit an 86% higher power efficiency at 1000 cd m-2 than ones with an Sn-doped indium oxide TCE. A full-vectorial electromagnetic simulation suggests the suppression of plasmonic absorption losses within their Ag cores. These results provide a feasibility of multifunctional TCEs with synthetically controlled core/shell nanomaterials toward the development of high-efficiency LED and solar cell devices.

Polarization-sensitive beam steering from quantum emitters coupled with birefringent metamaterials.

One-dimensional metal/dielectric subwavelength periodic patterns have dielectric or metallic material dispersions depending on the polarization of incident light. This feature enables the development of artificial, ultrathin, birefringent films. In this study, we report polarization-sensitive beam steering from quantum emitters coupled with one-dimensional metal/dielectric metamaterial films. Electromagnetic simulations show that an Al/ITO metamaterial film functioning as a quarter-wave plate leads to vertically directed radiation for one polarization and a saddle-shaped, diverging radiation pattern for the orthogonal polarization. The strategy studied herein is extended to achieve polarized, vertically directed emission from organic light-emitting diodes. A tailored Al/ITO metamaterial mirror yields an approximately 30-fold improvement in polarization ratio, in conjunction with polarization-dependent Purcell factor enhancement.