An experimental setup for creating and imaging 4He2 * excimer cluster tracers in superfluid helium-4 via neutron-3He absorption reaction.

For the purpose of future visualization of the flow field in superfluid helium-4, clusters of the triplet state excimer 4He2 * are generated along the micro-scale recoil tracks of the neutron-absorption reaction n + 3He → 3T + p. This reaction is induced by neutron irradiation of the 3He fraction contained in natural isotopic abundance liquid helium with neutron beams either from the Japan Proton Accelerator Research Complex, Materials and Life Science Experimental Facility (JPARC)/Materials and Life Science Experimental Facility or from the Kyoto University Institute for Integrated Radiation and Nuclear Science. These 4He2 * clusters are expected to be ideal tracers of the normal-fluid component in superfluid helium with several advantageous properties. Evidence of the excimer generation is inferred by detection of laser induced fluorescence emitted from the 4He2 * clusters excited by a purpose-built short pulse gain-switched titanium:sapphire (Ti:sa) laser operating at a wavelength of 905 nm. The setup and performance characteristics of the laser system including the Ti:sa and two continuous wave re-pumping lasers are described. Detection at the fluorescence wavelength of 640 nm is performed by using optical bandpass filtered photomultiplier tubes (PMT). Electrical noise in the PMT acquisition traces could successfully be suppressed by post-processing with a simple algorithm. Despite other laser-related backgrounds, the excimer was clearly identified by its fluorescence decay characteristics. Production of the excimer was found to be proportional to the neutron flux, adjusted via insertion of different collimators into the neutron beam. These observations suggest that the apparatus we constructed does function in the expected manner and, therefore, has the potential for groundbreaking turbulence research with superfluid helium.

Optimal moderator materials at various proton energies considering photon dose rate after irradiation for an accelerator-driven 9Be(p, n) boron neutron capture therapy neutron source.

We evaluated the accelerator beam power and the neutron-induced radioactivity of (9)Be(p, n) boron neutron capture therapy (BNCT) neutron sources having a MgF2, CaF2, or AlF3 moderator and driven by protons with energy from 8 MeV to 30 MeV. The optimal moderator materials were found to be MgF2 for proton energies less than 10 MeV because of lower required accelerator beam power and CaF2 for higher proton energies because of lower photon dose rate at the treatment position after neutron irradiation.

Project for the development of the linac based NCT facility in University of Tsukuba.

A project team headed by University of Tsukuba launched the development of a new accelerator based BNCT facility. In the project, we have adopted Radio-Frequency Quadrupole (RFQ)+Drift Tube Linac (DTL) type linac as proton accelerators. Proton energy generated from the linac was set to 8MeV and average current was 10mA. The linac tube has been constructed by Mitsubishi Heavy Industry Co. For neutron generator device, beryllium is selected as neutron target material; high intensity neutrons are generated by the reaction with beryllium and the 80kW proton beam. Our team chose beryllium as the neutron target material. At present beryllium target system is being designed with Monte-Carlo estimations and heat analysis with ANSYS. The neutron generator consists of moderator, collimator and shielding. It is being designed together with the beryllium target system. We also acquired a building in Tokai village; the building has been renovated for use as BNCT treatment facility. It is noteworthy that the linac tube had been installed in the facility in September 2012. In BNCT procedure, several medical devices are required for BNCT treatment such as treatment planning system, patient positioning device and radiation monitors. Thus these are being developed together with the linac based neutron source. For treatment planning system, we are now developing a new multi-modal Monte-Carlo treatment planning system based on JCDS. The system allows us to perform dose estimation for BNCT as well as particle radiotherapy and X-ray therapy. And the patient positioning device can navigate a patient to irradiation position quickly and properly. Furthermore the device is able to monitor movement of the patient׳s position during irradiation.

Optimum design of a moderator system based on dose calculation for an accelerator driven Boron Neutron Capture Therapy.

An accelerator based BNCT has been desired because of its therapeutic convenience. However, optimal design of a neutron moderator system is still one of the issues. Therefore, detailed studies on materials consisting of the moderator system are necessary to obtain the optimal condition. In this study, the epithermal neutron flux and the RBE dose have been calculated as the indicators to look for optimal materials for the filter and the moderator. As a result, it was found that a combination of MgF2 moderator with Fe filter gave best performance, and the moderator system gave a dose ratio greater than 3 and an epithermal neutron flux over 1.0×10(9)cm(-2)s(-1).

Spallation ultracold-neutron production in superfluid helium.

The first ultracold-neutron (UCN) production in superfluid helium placed in a spallation neutron source is carried out. A UCN density of 0.7 UCN/cm(3), which can be used in experiments, is achieved for a proton-beam power of 78 W and a He-II temperature of 1.2 K. The present new UCN source is not limited by Liouville's theorem and extraction losses, which were serious problems in the previous sources. The present source has the possibility of extremely high-density UCN production compared with previous UCN sources.