RESUMO
We present newly developed buffer systems that significantly improve the efficiency of a photochemically induced surface modification at the single molecule level. Buffers with paramagnetic cations and radical oxygen promoting species facilitate laser-assisted protein adsorption by photobleaching (LAPAP) of single fluorescently labelled oligonucleotides or biotin onto multi-photon-lithography-structured 2D and 3D acrylate scaffolds. Single molecule fluorescence microscopy has been used to quantify photopainting efficiency. We identify specific cation interaction sites for members of the cyanine, coumarin and rhodamine classes of fluorophores using quantum mechanical calculations. We show that our buffer systems provide an up to three-fold LAPAP-efficiency increase for the cyanine fluorophore, while keeping excitation parameters constant.
RESUMO
Until very recently, the enhancement of multiphoton-based optical lithography by stimulated emission depletion (STED) inspired techniques was limited mostly to (meth)acrylates. Epoxides, which play an important role in semiconductor clean-room technology, were basically excluded from capitalizing on STED-inspired lithography, and if they were successfully used in STED-inspired lithography, the achievable structure sizes remained at 125 nm and above. We now found that using 2-chlorothioxanthone (CTX) as a sensitizer for a sulfonium salt acting as the photoinitiator allows for shrinking the structure size down to 83 nm. Compared to the previously used sensitizer 2-isopropylthioxanthone, the triplet lifetime of CTX within the epoxide monomers is supposed to be prolonged by 40%, which renders an optical depletion via excited triplet state absorption more efficient, leading to a sub-100 nm structuring capability.
RESUMO
Recently, 2D/3D direct laser writing has attracted increased attention due to its broad applications ranging from biomedical engineering to aerospace. 3D nanolithography of water-soluble protein-based scaffolds have been envisioned to provide a variety of tunable properties. In this paper, we present a functional protein-based photoresist with tunable mechanical properties that is suitable for multiphoton lithography (MPL). Through the use of methacrylated streptavidin or methacrylated bovine serum albumin in combination with polyethylene glycol diacrylate or methacrylated hyaluronic acid as crosslinkers and a vitamin-based photoinitiator, we were able to write two- and three-dimensional structures as small as 200 nm/600 nm lateral/axial features, respectively. We also demonstrated that Young's modulus can be tuned by the photoresist composition, and we were able to achieve values as low as 40 kPa. Furthermore, we showed that Young's modulus can be recovered after drying and rehydration (i.e. shelf time determination). The retained biological functionality of the streptavidin scaffolds was demonstrated using fluorescently labelled biotins. Using single-molecule fluorescence microscopy, we estimated the density of streptavidin in the written features (1.8 ± 0.2 × 105 streptavidins per 1.00 ± 0.05 µm³ of feature volume). Finally, we showed applicability of our 2D scaffold as a support for a fluorescence absorbance immuno-assay (FLISA), and as a delivery platform of extracellular vesicles to HeLa cells.
RESUMO
Direct laser writing by two-photon lithography has been enhanced substantially during the past two decades by techniques borrowed from stimulated emission depletion (STED) microscopy. However, STED-inspired lithography was so far limited to radical polymerizations, mostly to acrylates and methacrylates. Cationic polymers did not derive benefits from this technique. Specifically, epoxide polymerization, which plays a paramount role in semiconductor clean-room technology, has not yet been reported with a second, depleting laser focus in the outer rim of the point spread function. We now found that using a thioxanthone as a sensitizer and sulfonium or iodonium salts as photoinitiators enables at least partial optical on/off switching of two-photon polymerization and, in the case of the sulfonium salt, allows for writing epoxy lines with widths shrunk by approx. two-thirds compared to lines written with two-photon polymerization alone.
RESUMO
Stimulated emission depletion (STED) has been used to break the diffraction limit in fluorescence microscopy. Inspired by this success, similar methods were used to reduce the structure size in three-dimensional, subdiffractional optical lithography. So far, only a very limited number of radical polymerization starters proved to be suitable for STED-inspired lithography. In this contribution, we introduce the starter Michler's ethyl ketone (MEK), which has not been used so far for STED-inspired lithography. In contrast to the commonly used 7-diethylamino-3-thenoylcoumarin (DETC), nanostructures written with MEK show low autofluorescence in the visible range. Therefore, MEK is promising for being used as a starter for protein or cell scaffolds in physiological research because the autofluorescence of DETC so far excluded the use of the green emission channel in multicolor fluorescence or confocal microscopy. In turn, because of the weak transitions of MEK in the visible spectrum, STED, in its original sense, cannot be applied to deplete MEK in the outer rim of the point spread function. However, a 660 nm laser can be used for depletion because this wavelength is well within the absorption spectrum of transient states, possibly of triplet states. We show that polymerization can be fully stopped by applying transient state absorption at 660 nm and that structure sizes down to approx. 40 nm in the lateral and axial directions can be achieved, which means 1/20 of the optical wavelength used for writing.
RESUMO
Three-dimensional photopolymerization techniques such as multiphoton polymerization lithography (MPL) and stimulated emission depletion (STED) lithography are powerful tools for fabricating structures in the sub-µm range. Combining these techniques with microfluidics enables us to broaden the range of their applications. In this study, we show a microfluidic device enhanced with MPL structures carrying STED-lithographically written nanoanchors that promote binding of the von Willebrand factor (vWF). The density of vWF is adjusted by varying the number of the nanoanchors on the 3D structures. This allows us to study the impact of the density of vWF on the activation of thrombocytes. The activation of the thrombocytes seems to decrease with the density of vWF on the 3D scaffolds inside the microfluidic channels.
Assuntos
Plaquetas , Microfluídica/métodos , Humanos , Imunoglobulina G , Dispositivos Lab-On-A-Chip , Polimerização , Ligação Proteica , Fator de von Willebrand/metabolismoRESUMO
High-resolution imaging is essential for analysis of the steps and way stations of cargo transport in in vitro models of the endothelium. In this study, we demonstrate a microfluidic system consisting of two channels horizontally separated by a cell-growth-promoting membrane. Its design allows for high-resolution (down to single-molecule level) imaging using a high numerical aperture objective with a short working distance. To reduce optical aberrations and enable single-molecule-sensitive imaging, an observation window was constructed in the membrane via laser cutting with subsequent structuring using 3D multiphoton lithography for improved cell growth. The upper channel was loaded with endothelial cells under flow conditions, which showed polarization and junction formation. A coculture of human vascular endothelial cells with pericytes was developed that mimics the blood-brain barrier. Finally, this dual channel microfluidics system enabled 3D localization microscopy of the cytoskeleton and 3D single-molecule-sensitive tracing of lipoprotein particles.
Assuntos
Barreira Hematoencefálica , Microfluídica , Técnicas de Cocultura , Células Endoteliais , Humanos , PericitosRESUMO
Utilizing Bragg surface plasmon polaritons (SPPs) on metal nanostructures for the use in optical devices has been intensively investigated in recent years. Here, we demonstrate the integration of nanostructured metal electrodes into an ITO-free thin film bulk heterojunction organic solar cell, by direct fabrication on a nanoimprinted substrate. The nanostructured device shows interesting optical and electrical behavior, depending on angle and polarization of incidence and the side of excitation. Remarkably, for incidence through the top electrode, a dependency on linear polarization and angle of incidence can be observed. We show that these peculiar characteristics can be attributed to the excitation of dispersive and non-dispersive Bragg SPPs on the metal-dielectric interface on the top electrode and compare it with incidence through the bottom electrode. Furthermore, the optical and electrical response can be controlled by the organic photoactive material, the nanostructures, the materials used for the electrodes and the epoxy encapsulation. Our device can be used as a detector, which generates a direct electrical readout and therefore enables the measuring of the angle of incidence of up to 60° or the linear polarization state of light, in a spectral region, which is determined by the active material. Our results could furthermore lead to novel organic Bragg SPP-based sensor for a number of applications.
RESUMO
If two metal nanoparticles are ultimately approached, a tunneling current prevents both an infinite redshift of the bonding dipolar plasmon and an infinite increase of the electric field in the hot spot between the nanoparticles. We argue that a Coulomb blockade suppresses the tunneling current and sustains a redshift even for sub-nanometer approach up to moderate fields. Only for stronger optical fields, the Coulomb blockade is lifted and a charge transfer plasmon is formed. Numerical simulations show that such scenarios are well in reach with manageable nanoparticle dimensions, even at room temperature. Applications may include ultrafast, optically driven switches, photo detectors operating at 500 THz, or highly nonlinear devices.
RESUMO
The fabrication of two- and three-dimensional scaffolds mimicking the extracellular matrix and providing cell stimulation is of high importance in biology and material science. We show two new, biocompatible polymers, which can be 3D structured via multiphoton lithography, and determine their mechanical properties. Atomic force microscopy analysis of structures with sub-micron feature sizes reveals Young's modulus values in the 100 MPa range. Assessment of biocompatibility of the new resins was done by cultivating human umbilical vein endothelial cells on two-dimensionally structured substrates for four days. The cell density and presence of apoptotic cells has been quantified.
RESUMO
Mobility of proteins and lipids plays a major role in physiological processes. Platforms which were developed to study protein interaction between immobilized and mobile proteins suffer from shortcomings such as fluorescence quenching or complicated fabrication methods. Here we report a versatile platform comprising immobilized histidine-tagged proteins and biotinylated proteins in a mobile phase. Importantly, multiphoton photolithography was used for easy and fast fabrication of the platform and allows, in principle, extension of its application to three dimensions. The platform, which is made up of functionalized polymer structures embedded in a mobile lipid bilayer, shows low background fluorescence and allows for mobility of arbitrary proteins.
Assuntos
Acrilatos/química , Bicamadas Lipídicas/química , Polímeros/química , Proteínas/química , Difusão , Fluorescência , Processos FotoquímicosRESUMO
Spasers and nanolasers produce a significant amount of heat, which impedes their realizability. We numerically investigate the farfield emission and thermal load in optically pumped spasers with a coupled electromagnetic/thermal model, including additional temperature discontinuities due to interfacial Kapitza resistance. This approach allows to explore multiple combinations of constitutive materials suitable for robust manufacturable spasers. Three main channels of heat generation are quantified: metal absorption at pumping and spasing wavelengths and nonradiative relaxations in the gain material. Out-radiated power becomes comparable with absorption for spasers of realistic dimensions. Two optimized spaser configurations emitting light near 520 nm are compared in detail: a prolate metal-core/gain-shell and an oblate gain-core/metal-shell. The metal-shell design, which with the increasing size transforms into a metal-clad nanolaser, achieves an internal light-extraction efficiency of 22.4%, and stably operates up to several hundred picoseconds, an order of magnitude longer than the metal-core spaser.
RESUMO
Stimulated emission depletion (STED) nanolithography allows nanofabrication below the diffraction limit. Recently, it was applied to nanoanchors for protein fixation down to the single molecule level. We now combined STED nanolithography with laser-assisted protein adsorption by photobleaching (LAPAP) for optical and selective attachment of proteins to subdiffractional structures. In turn, STED was used for imaging of fluorescently tagged streptavidin to reveal protein binding to STED-lithographically patterned acrylate structures via LAPAP. Protein localization down to 56 nm spots was achieved using all-optical methods at visible wavelengths.
Assuntos
Nanotecnologia/métodos , Fotodegradação , Polímeros/química , Lasers , Polímeros/efeitos da radiação , Ligação Proteica , Estreptavidina/químicaRESUMO
An electromagnetic wave impinging on a gold nanosponge coherently excites many electromagnetic hot-spots inside the nanosponge, yielding a polarization-dependent scattering spectrum. In contrast, a hole, recombining with an electron, can locally excite plasmonic hot-spots only within a horizon given by the lifetime of localized plasmons and the speed carrying the information that a plasmon has been created. This horizon is about 57 nm, decreasing with increasing size of the nanosponge. Consequently, photoluminescence from large gold nanosponges appears unpolarized.
RESUMO
Multiphoton polymerization (MPP) enables 3D fabrication of micro- and nanoscale devices with complex geometries. Using MPP, we create a 3D platform for protein assays. Elevating the protein-binding sites above the substrate surface allows an optically sectioned readout, minimizing the inevitable background signal from nonspecific protein adsorption at the substrate surface. Two fluorescence-linked immunosorbent assays are demonstrated, the first one relying on streptavidin-biotin recognition and the second one on antibody recognition of apolipoprotein A1, a major constituent of high-density lipoprotein particles. Signal-to-noise ratios exceeding 1000 were achieved. The platform has high potential for 3D multiplexed recognition assays with an increased binding surface for on-chip flow cells.
Assuntos
Proteínas/análise , Adsorção , Anticorpos , Biotina , Polimerização , EstreptavidinaRESUMO
Here, we report that hybrid multilayered plasmonic nanostars can be universally used as feedback agents for coherent random lasing in polar or nonpolar solutions containing gain material. We show that silver-enhancement of gold nanostars reduces the pumping threshold for coherent random lasing substantially for both a typical dye (R6G) and a typical fluorescent polymer (MEH-PPV). Further, we reveal that the lasing intensity and pumping threshold of random lasers based on silver-enhanced gold nanostars are not influenced by the silica coating, in contrast to gold nanostar-based random lasers, where silica-coated gold nanostars support only amplified spontaneous emission but no coherent random lasing.
RESUMO
Bulk gold shows photoluminescence (PL) with a negligible quantum yield of â¼10-10, which can be increased by orders of magnitude in the case of gold nanoparticles. This bears huge potential to use noble metal nanoparticles as fluorescent and unbleachable stains in bioimaging or for optical data storage. Commonly, the enhancement of the PL yield is attributed to nanoparticle plasmons, specifically to the enhancements of scattering or absorption cross sections. Tuning the shape or geometry of gold nanostructures (e.g., via reducing the distance between two nanoparticles) allows for redshifting both the scattering and the PL spectra. However, while the scattering cross section increases with a plasmonic redshift, the PL yield decreases, indicating that the common simple picture of a plasmonically boosted gold luminescence needs more detailed consideration. In particular, precise experiments as well as numerical simulations are required. Hence, we systematically varied the distance between the tips of two gold bipyramids on the nanometer scale using AFM manipulation and recorded the PL and the scattering spectra for each separation. We find that the PL intensity decreases as the interparticle coupling increases. This anticorrelation is explained by a theoretical model where both the gold-intrinsic d-band hole recombination probabilities as well as the field strength inside the nanostructure are considered. The scattering cross section or the field strength in the hot-spot between the tips of the bipyramids are not relevant for the PL intensity. Besides, we not only observe PL supported by dipolar plasmon resonances, but also measure and simulate PL supported by higher order plasmonic modes.
RESUMO
We report on simultaneous frequency domain optical-resolution photoacoustic and fluorescence microscopy with sub-µm lateral resolution. With the help of a blood smear, we show that photoacoustic and fluorescence images provide complementary information. Furthermore, we compare theoretically predicted signal-to-noise ratios of sinusoidal modulation in frequency domain with pulsed excitation in time domain.
RESUMO
Huge spectral coverage of random lasing throughout the visible up to the infrared range is achieved with star-shaped gold nanoparticles ("nanostars"). As intrinsically broadband scattering centers, the nanostars are suspended in solutions of various laser dyes, forming randomly arranged resonators which support coherent laser modes. The narrow emission line widths of 0.13 nm or below suggest that gold nanostars provide an efficient coherent feedback for random lasers over an extensive range of wavelengths, all together spanning almost a full optical octave from yellow to infrared.
RESUMO
It is known (yet often ignored) from quantum mechanical or energetic considerations, that the threshold gain of the quasi-static spaser depends only on the dielectric functions of the metal and the gain material. Here, we derive this result from the purely classical electromagnetic scattering framework. This is of great importance, because electrodynamic modelling is far simpler than quantum mechanical one. The influence of the material dispersion and spaser geometry are clearly separated; the latter influences the threshold gain only indirectly, defining the resonant wavelength. We show that the threshold gain has a minimum as a function of wavelength. A variation of nanoparticle shape, composition, or spasing mode may shift the plasmonic resonance to this optimal wavelength, but it cannot overcome the material-imposed minimal gain. Furthermore, retardation is included straightforwardly into our framework; and the global spectral gain minimum persists beyond the quasi-static limit. We illustrate this with two examples of widely used geometries: Silver spheroids and spherical shells embedded in and filled with gain materials.