RESUMO
Introduction: Previous research has highlighted the duality of self-consciousness, which simultaneously plays adaptive and maladaptive roles. This study aims to develop a measure that categorically distinguishes between different types of self-consciousness styles based on the Regulatory Focus Theory (RFT) and examines their relationship with mental health-related indicators. Methods: Data were gathered through an online mental health survey conducted at a University Student Counseling Center in Seoul. The study involved exploratory factor analysis, confirmatory factor analysis, and reliability and validity analysis, which resulted in the development of a 14-question Self-Consciousness Type Scale (SCTS). Results: Both exploratory and confirmatory factor analyses validated the two-factor structure of the SCTS. The fit indices of the final model indicated a good fit, with high internal consistency for both sub-factors. Convergent and discriminant validity were confirmed through correlations between the sub-scales. Cluster analysis identified four distinct subtypes of self-consciousness styles: Growth-oriented, Defensive, Ambivalent, and Low-focus self-consciousness. Group difference analysis revealed significant differences in mental health-related variables among the subtypes, supporting the 2 × 2 model of prevention-focused and promotion-focused self-consciousness. Discussion: The findings support the SCTS as a valid measurement tool capable of distinguishing four distinct types of self-consciousness, aligning with the multidimensional model of self-consciousness. The study's limitations and implications were discussed based on the results, emphasizing the potential applications of the SCTS in mental health research and practice.
RESUMO
A lot of research has been focused on increasing the specific surface area of adsorbents over a long period of time to remove heavy metal ions from wastewater using the adsorbent. However, porous adsorbents with high specific surface area have demonstrated drawbacks in water purification processes, such as high pressure drop and limitations in the adsorption capacity of heavy metal ions. In recent years, a mechanism-based convergence method involving adsorption/chemical precipitation has emerged as a promising strategy to surmount the constraints associated with porous adsorbents. The mechanism involves amine groups on chelating fibers dissociating OH- ions from water molecules, thereby raising the pH near the fibers. This elevated pH promotes the crystallization of heavy metal ions on the fiber surfaces. The removal of heavy metal ions proceeds through a sequence of adsorption and chemical precipitation processes. An adsorbent based on chelating fibers, integrating adsorption technology with chemical precipitation, demonstrates superior performance in removing significant quantities of heavy metal ions (ca. 1000-2000 mg/g for Cd2+, Cu2+ and Pb2+) when compared to developed porous adsorbents (ca. 50-760 mg/g for same ions). This review paper introduces advanced polymer fibers endowed with the capability to integrate hybrid technology, delves into the mechanism of hybrid technology, and examines its application in process technology for the effective removal of heavy metal ions. The versatility of these advanced fibers extends far beyond the removal of heavy metal ions in water treatment, making them poised to garner significant attention from researchers across diverse fields due to their broad range of potential applications. After further processes involving the removal of templates from chelating polymeric fibers used as supports and the reduction of precipitated heavy metal oxide crystals, the resulting heavy metal crystals can exhibit thin walls and well-interconnected porous structures, suitable for catalytic applications.
Assuntos
Precipitação Química , Metais Pesados , Polímeros , Poluentes Químicos da Água , Purificação da Água , Metais Pesados/química , Adsorção , Purificação da Água/métodos , Poluentes Químicos da Água/química , Polímeros/química , Águas Residuárias/química , Porosidade , Íons/químicaRESUMO
The effectiveness of a copper(II) complex with a Schiff base derived from 2-amino-4-phenyl-5-methylthiazole and salicylaldehyde (APMS) as a corrosion inhibitor for XC18 steel in an HCl solution was investigated. Experimental findings indicated a slight negative correlation between inhibition efficiencies in 1 M HCl and temperature but a positive correlation with both inhibitor concentration and immersion time, respectively. The weight loss measurement revealed that APMS achieved a maximum inhibition rate of 92.07% at 303 K. A fitting analysis demonstrated that APMS adheres to the Langmuir adsorption isotherm. The electrochemical results revealed an enhanced inhibitive performance of APMS, with the efficiency increasing as concentrations increased, ultimately reaching a peak of 94.47% at 5 × 10-3 mol L-1. Potentiodynamic polarization measurements revealed that APMS acted as a mixed-type inhibitor without affecting the corrosion mechanism. Scanning electron microscopy investigations of the metal surfaces corroborated the presence of an adsorbed organic layer. Advanced theoretical calculations utilizing density functional theory and first-principles density-functional tight-binding were conducted to gain insights into the behavior of APMS on the metal surface. APMS derives its advantages from crucial inter- and intramolecular interactions, resulting in the formation of a resilient adsorption layer, in line with the experimental findings. It is found that the presence of the APMS-based inhibitor exhibits a significant synergistic corrosion inhibition effect. The current study offers a design direction for enhancing the structural characteristics of Schiff base metal complexes, laying the groundwork for multifunctional frameworks to minimize corrosion rates with considerations for real-world use and cost-efficiency. The ability to replace harmful, expensive constituents with sustainable, and cost-effective organic alternatives represents a significant outcome of this study.
RESUMO
This study explores the combined potential of severe plastic deformation (SPD) via differential speed rolling (DSR) and plasma electrolytic oxidation (PEO) to enhance the material performance of 6061 Al alloys. To this end, DSR was carried out at a roll-speed-ratio of 1:4 to obtain ~75% total thickness reduction and a final microstructure of <1 µm. The rest of the samples were annealed to obtain various grain sizes of ~1, ~25, and ~55 µm. Through DSR, the hardness of the material increased from ~64 to ~102 HV. Different grain sizes altered the plasma behavior which further influence the growth of the coating layer, where the fine grain size produced a compact structure beneficial for corrosion protection. This synergy offers tailored materials ideal for high-performance applications across diverse industries, combining enhanced bulk properties from DSR with optimized surface attributes from PEO.
RESUMO
Growing research activity on layered double hydroxide (LDH)-based materials for novel applications has been increasing; however, promoting LDH layer growth and examining its morphologies without resorting to extreme pressure conditions remains a challenge. In the present study, we enhance LDH growth and morphology examination without extreme pressure conditions. By synthesizing Mg-Al LDH directly on plasma electrolytic oxidation (PEO)-treated Mg alloy surfaces and pores at ambient pressure, the direct synthesis was achieved feasibly without autoclave requirements, employing a suitable chelating agent. Additionally, enhancing corrosion resistance involved incorporating electron donor-acceptor compounds into a protective layer, with 8-Hydroxyquinoline-5-sulfonic acid (HQS) that helps in augmenting Mg alloy corrosion resistance through the combination of LDH ion-exchange ability and the organic layer. DFT simulations were used to explain the mutual interactions in the LDH system and provide a theoretical knowledge of the interfacial process at the molecular level.
RESUMO
The scaffold is a porous three-dimensional (3D) material that supports cell growth and tissue regeneration. Such 3D structures should be generated with simple techniques and nontoxic ingredients to mimic bio-environment and facilitate tissue regeneration. In this work, simple but powerful techniques are demonstrated for the fabrication of lamellar and honeycomb-mimic scaffolds with poly(L-lactic acid). The honeycomb-mimic scaffolds with tunable pore size ranging from 70 to 160 µm are fabricated by crystal needle-guided thermally induced phase separation in a directional freezing apparatus. The compressive modulus of the honeycomb-mimic scaffold is ≈4 times higher than that of scaffold with randomly oriented pore structure. The fabricated honeycomb-mimic scaffold exhibits a hierarchical structure from nanofibers to micro-/macro-tubular structures. Pre-osteoblast MC3T3-E1 cells cultured on the honeycomb-mimic nanofibrous scaffolds exhibit an enhanced osteoblastic phenotype, with elevated expression levels of osteogenic marker genes, than those on either porous lamellar scaffolds or porous scaffolds with randomly oriented pores. The advanced techniques for the fabrication of the honeycomb-mimic structure may potentially be used for a wide variety of advanced functional materials.
Assuntos
Nanofibras , Osteoblastos , Poliésteres , Alicerces Teciduais , Alicerces Teciduais/química , Nanofibras/química , Camundongos , Animais , Osteoblastos/citologia , Osteoblastos/metabolismo , Osteoblastos/efeitos dos fármacos , Poliésteres/química , Porosidade , Linhagem Celular , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Engenharia Tecidual/métodos , Osteogênese/efeitos dos fármacosRESUMO
There is growing focus on the crucial task of effectively capturing carbon dioxide (CO2) from the atmosphere to mitigate environmental consequences. Metal-organic frameworks (MOFs) have been used to replace many conventional materials in gas separation, and the incorporation of ionic liquids (ILs) into porous MOFs has shown promise as a new technique for improving CO2 capture and separation. However, the driving force underlying the electronic modulation of MOF nanostructures and the mechanisms behind their high CO2 adsorption remain unclear. This study reports the effect of encapsulating different imidazolium ILs in porous ZIF-8, to clarify the adsorption mechanism of CO2 using density functional theory (DFT)-based approaches. For this purpose, a range of anions, including bis(trifluoromethylsulfonyl)imide [NTf2], methanesulfonate [MeSO3], and acetate [AC], were combined with the 1-ethyl-3-methylimidazolium [EMIM]+ cation. [EMIM]+-based ILs@ZIF-8 composites were computationally investigated to identify suitable materials for CO2 capture. First, the intermolecular and intramolecular interactions between [EMIM]+ and different anions were examined in detail, and their effects on CO2 adsorption were explored. Subsequently, the integration of these ILs into the ZIF-8 solid structure was studied to reveal how their interactions influenced the CO2 adsorption behavior. Our results demonstrate that the incorporation of ILs strongly affects the adsorption capability of CO2, which is highly dependent on the nature of the ILs inside the ZIF-8 framework. DFT simulations further confirmed that the incorporation of ILs into ZIF-8 led to superior CO2 capture compared to isolated ILs and pristine ZIF-8. This improvement was attributed to the mutual interactions between the ILs and ZIF-8, which effectively fine-tuned CO2 adsorption within the composite structure. This understanding may act as a general guide for gaining more insight into the interfacial interactions between ILs and ZIFs structures and how these molecular-level interactions can help predict the selection of ILs for CO2 adsorption and separation, thereby addressing environmental challenges with greater precision and effectiveness.