RESUMO
BACKGROUND: The extrusion of apical debris is related to various factors, and may be affected by variations in technique or instrumentation system. Although the extrusion cannot be completely prevented, it is crucial to minimize the amount of extruded material. OBJECTIVES: The present study aimed to compare apical debris extrusion by the novel TruNatomy (TRN), OneCurve (OC) and ProTaper Next (PTN) instruments in curved root canals. MATERIAL AND METHODS: A total of 60 multi-rooted human mandibular molar teeth with moderate and severe curvature were selected and randomly divided into 3 groups. The root canals were prepared with the OC, TRN and PTN files. For collecting the debris extruded through the apical foramen, Eppendorf tubes were used. After the vaporizing period, the tubes were re-weighed, and the amount of the extruded debris was calculated by subtracting the initial weight from the final weight. Statistical analysis was performed with the Shapiro-Wilk and Kruskal-Wallis tests. The statistical significance level was set at p < 0.05. RESULTS: The least amount of debris was extruded with TRN and the greatest with PTN, but the difference between the groups was not significant (p = 0.257). CONCLUSIONS: All instrumentation systems were associated with debris extrusion. The tested file systems presented similar results in terms of apical debris extrusion in curved canals. The novel TRN system demonstrated promising results, comparable to OC and PTN.
Assuntos
Preparo de Canal Radicular , Ápice Dentário , Humanos , Ápice Dentário/cirurgia , Dente Molar/cirurgiaRESUMO
To compare the penetration of Ah Plus and MTA Fillapex after irrigation activation with sonic, passive ultrasonic, SWEEPS and XP-Endo Finisher using confocal microscopy. Instrumented root canals of 160 mandibular premolar teeth were allocated randomly to four groups (n = 40/group) and eight subgroups according to the activation techniques and canal sealers (n = 20/subgroup). After the obturation, three sections at 1-2, 5-6 and 9-10 mm levels from the apex were examined. Penetration area and maximum penetration depth values were represented as mean and standard deviation, and results below 0.05 were considered statistically significant. For penetration area and maximum penetration depth, the statistical difference was found in terms of material, device and region (Maximum penetration depth: p = 0.006, p < 0.001, p < 0.001; Penetration area: p = 0.004, p < 0.001, p < 0.001). SWEEPS was found to be relatively higher than other groups. Sealers presented similar results when evaluated independently of the region. The use of SWEEPS for irrigation activation is promising in terms of tubule penetration.
Assuntos
Materiais Restauradores do Canal Radicular , Cavidade Pulpar , Projetos de Pesquisa , Dente Pré-Molar , Microscopia Confocal , Resinas EpóxiRESUMO
This study aimed to evaluate dentinal tubule penetration of the root canal filling material using various techniques such as cold lateral compaction, new generation thermoplastic core carrier and continuous-wave obturation. The root canals of premolar teeth were instrumented, and the teeth were allocated randomly to three groups (n = 15/group). After the obturation with three different techniques, three sections of 2-mm thickness at 2, 5 and 8-mm from the apex were examined under a confocal laser scanning microscope. The data were analysed of variance with a significance level of P < 0.05. There was no significant difference between techniques when parameters were evaluated in total (penetration depth P = 0.418, penetration area P = 0.701). The mean value of the cold lateral compaction group for maximum penetration depth was obtained higher than continuous wave (P = 0.004), whilst there was no significant difference between the thermoplastic core carrier and the other groups.
Assuntos
Guta-Percha , Materiais Restauradores do Canal Radicular , Cavidade Pulpar , Resinas Epóxi , Microscopia Confocal , Obturação do Canal Radicular/métodos , Preparo de Canal Radicular/métodos , SeringasRESUMO
Background. This study aimed to compare the cyclic fatigue resistance of ProTaper Next, Hyflex CM, 2Shape, and TF-Adaptive nickel-titanium endodontic file systems with various alloy properties and production methods and investigate the fractured cross-sectional surface of files due to cyclic fatigue by scanning electron microscopy (SEM). Methods. A total of 120 instruments were used (n=30). For standardization, #25/.06 apical diameter and taper angle were selected for each file system. The experiment of files was subjected to a static cyclic fatigue model. The time for files' failure was recorded with a digital chronometer and multiplied by the rotation speed to calculate the number of cycles. Kolmogorov-Smirnov, one-way ANOVA, and post hoc Bonferroni analysis were used for statistical analysis. Statistical significance was set at P < 0.05. Results. The number of cycles for the failure of files was compared between the groups, and significant differences were found (P < 0.05). The number of cycles for instrument failure was recorded from the highest to the lowest as follows: Hyflex CM, TF-Adaptive, ProTaper Next, and 2Shape. Conclusion. The files were fractured at different average numbers of cycles in an artificial canal in all the groups. The Hyflex CM demonstrated better cyclic fatigue resistance than TF Adaptive, ProTaper Next, and 2Shape file systems. Factors such as production patterns, alloy properties, and the phase in which the files were produced might affect the lifespan of file systems.
RESUMO
Background. This study aimed to evaluate the effects of repeated sterilization cycles on the surface alterations of various nickel-titanium instruments, including ProTaper Next (PTN), TF Adaptive (TFA), HyFlex CM (HCM), and 2Shape (2S). Methods. Twenty-four new NiTi files of four different alloys were selected. The instruments in each group were divided into two equal groups, as follows: control and sterilization. The first group was chosen as the control without applying any sterilization procedure, while in group 2, five cycles of sterilization procedures were applied. The surface topographies were evaluated using scanning electron microscope (SEM) and atomic force microscope (AFM). The root mean square (RMS) and maximum height (MH) values and three-dimensional images were recorded. The data were analyzed with the Shapiro-Wilk test, one-way ANOVA, and post hoc Tukey tests. The statistical significance level was set at P ≤ 0.05. Results. Before the experiment, HCM demonstrated the highest RMS value, and 2S showed the lowest. After the procedures, the RMS and MH values deteriorated on the surface of PTX, TFA, and 2S (P < 0.001). The HCM was not affected by sterilization processes (P > 0.05). Conclusion. The initial irregularity on the surface did not affect the rate of alteration. The HCM files demonstrated superior surface properties after several cycles of sterilization. The PTN, TFA, and 2S presented similar surface responses after five cycles of autoclave sterilization.
RESUMO
The aim of this study was to compare the amount of apically extruded debris during root canal instrumentation using ProTaper Next (PTN), Twisted File (TF) Adaptive, and Reciproc instruments. Forty-five extracted human maxillary canines were selected and randomly assigned into 3 groups. The root canals were prepared using PTN instruments with continuous rotation (n=15), TF Adaptive instruments with adaptive motion (n=15), Reciproc instruments with reciprocating motion (n=15). During the preparations, canals were irrigated using distilled water and material extruded apically was collected in pre-weighed Eppendorf tubes. After a 5-day drying period in an incubator, the tubes were weighed and the dry weight of the extruded debris was calculated. Data distributions were assessed via the Shapiro-Wilk test, and groups were compared via the Kruskal-Wallis test. The greatest amount of debris extruded by TF Adaptive and the least by PTN, but the difference was insignificant between groups (p=0.259). All instrumentation systems were associated with debris extrusion.
Assuntos
Apicectomia/instrumentação , Cavidade Pulpar/cirurgia , Movimento (Física) , Preparo de Canal Radicular/instrumentação , Rotação , Ápice Dentário/cirurgia , Dente Canino , Desenho de Equipamento , Humanos , Técnicas In Vitro , Maxila , Irrigação TerapêuticaRESUMO
Abstract The aim of this study was to compare the amount of apically extruded debris during root canal instrumentation using ProTaper Next (PTN), Twisted File (TF) Adaptive, and Reciproc instruments. Forty-five extracted human maxillary canines were selected and randomly assigned into 3 groups. The root canals were prepared using PTN instruments with continuous rotation (n=15), TF Adaptive instruments with adaptive motion (n=15), Reciproc instruments with reciprocating motion (n=15). During the preparations, canals were irrigated using distilled water and material extruded apically was collected in pre-weighed Eppendorf tubes. After a 5-day drying period in an incubator, the tubes were weighed and the dry weight of the extruded debris was calculated. Data distributions were assessed via the Shapiro-Wilk test, and groups were compared via the Kruskal-Wallis test. The greatest amount of debris extruded by TF Adaptive and the least by PTN, but the difference was insignificant between groups (p=0.259). All instrumentation systems were associated with debris extrusion.
Resumo O objetivo deste estudo foi comparar a quantidade de detritos apicalmente extruídos durante a instrumentação do canal radicular usando os instrumentos ProTaper Next (PTN), Twisted File (TF) Adaptative e Reciproc. Quarenta e cinco caninos superiores humanos extraídos foram selecionados e distribuídos aleatoriamente em 3 grupos. Os canais radiculares foram preparados utilizando instrumentos PTN com rotação contínua (n = 15), instrumentos TF Adaptative com movimento adaptativo (n = 15), instrumentos Reciproc com movimento oscilatório (n = 15). Durante os preparos, os canais foram irrigados com água destilada e o material extruído foi coletado apicalmente em tubos Eppendorf pré-pesados. Após um período de secagem de 5 dias numa incubadora, os tubos foram pesados e o peso seco dos resíduos extruídos foi calculado. A distribuição dos dados foi avaliada pelo teste de Shapiro-Wilk e os grupos foram comparados pelo teste de Kruskal-Wallis. A maior quantidade de detritos extruídos foi proporcionada pelo TF Adaptive e a menor pelo PTN, mas a diferença não foi estatisticamente significante entre os grupos (p=0,259). Todos os sistemas de instrumentação promoveram extrusão de detritos apicalmente.
Assuntos
Humanos , Apicectomia/instrumentação , Rotação , Preparo de Canal Radicular/instrumentação , Ápice Dentário/cirurgia , Cavidade Pulpar/cirurgia , Movimento (Física) , Técnicas In Vitro , Dente Canino , Desenho de Equipamento , Irrigação Terapêutica , MaxilaRESUMO
OBJECTIVES: The aim of this clinical study was to evaluate the influence of the instrumentation techniques on the incidence and intensity of postoperative pain in single-visit root canal treatment. MATERIAL AND METHODS: Ninety patients with single root/canal and non-vital pulps were included. The patients were assigned into 3 groups according to root canal instrumentation technique used; modified step-back, reciprocal, and rotational techniques. Root canal treatment was carried out in a single visit and the severity of postoperative pain was assessed via 4-point pain intensity scale. All the participants were called through the phone at 12, 24 and 48 h to obtain the pain scores. Data were analyzed through the Kruskal-Wallis test. RESULTS: There was significant difference between all groups (p<0.05). The modified step-back technique produced postoperative pain significantly lower than the rotational (p=0.018) and reciprocal (p=0.020) techniques. No difference was found between the reciprocal and rotational techniques (p=0.868). Postoperative pain in the first 12 h period (p=0.763) and in the 24 h period (p=0.147) was not significantly different between the groups. However, the difference in the 48 h period was statistically different between the groups (p=0.040). CONCLUSION: All instrumentation techniques caused postoperative pain. The modified step-back technique produced less pain compared to the rotational and reciprocal techniques.
Assuntos
Instrumentos Odontológicos/efeitos adversos , Dor Pós-Operatória/etiologia , Tratamento do Canal Radicular/efeitos adversos , Tratamento do Canal Radicular/instrumentação , Adulto , Idoso , Desenho de Equipamento , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Medição da Dor , Índice de Gravidade de Doença , Estatísticas não Paramétricas , Fatores de Tempo , Resultado do Tratamento , Adulto JovemRESUMO
Abstract Postoperative pain is a frequent complication associated with root canal treatment, especially during apical instrumentation of tooth with preexisting periradicular inflammation Objectives The aim of this clinical study was to evaluate the influence of the instrumentation techniques on the incidence and intensity of postoperative pain in single-visit root canal treatment. Material and Methods Ninety patients with single root/canal and non-vital pulps were included. The patients were assigned into 3 groups according to root canal instrumentation technique used; modified step-back, reciprocal, and rotational techniques. Root canal treatment was carried out in a single visit and the severity of postoperative pain was assessed via 4-point pain intensity scale. All the participants were called through the phone at 12, 24 and 48 h to obtain the pain scores. Data were analyzed through the Kruskal–Wallis test. Results There was significant difference between all groups (p<0.05). The modified step-back technique produced postoperative pain significantly lower than the rotational (p=0.018) and reciprocal (p=0.020) techniques. No difference was found between the reciprocal and rotational techniques (p=0.868). Postoperative pain in the first 12 h period (p=0.763) and in the 24 h period (p=0.147) was not significantly different between the groups. However, the difference in the 48 h period was statistically different between the groups (p=0.040). Conclusion All instrumentation techniques caused postoperative pain. The modified step-back technique produced less pain compared to the rotational and reciprocal techniques.
Assuntos
Humanos , Masculino , Feminino , Adulto , Pessoa de Meia-Idade , Idoso , Adulto Jovem , Dor Pós-Operatória/etiologia , Tratamento do Canal Radicular/efeitos adversos , Tratamento do Canal Radicular/instrumentação , Instrumentos Odontológicos/efeitos adversos , Fatores de Tempo , Índice de Gravidade de Doença , Medição da Dor , Resultado do Tratamento , Estatísticas não Paramétricas , Desenho de EquipamentoRESUMO
To evaluate the influence of passive ultrasonic irrigation (PUI) to remove the smear layer with different irrigation solutions. Seventy-eight single rooted mandibular premolars were used. The working lengths were measured and the root canals were prepared by using nickel titanium rotary files. The specimens were subjected to six different irrigation regimens: sodium hypochloride (NaOCl) with classic irrigation (CI); NaOCl with PUI; EDTA with CI; EDTA with PUI; QMix with CI; and QMix with PUI. The specimens were split longitudinally. Scanning electron microscopy images were taken to evaluate the amount of residual smear layer and scored. Statistical analysis was performed with the Kruskal-Wallis test. The Dunn's test was used for post hoc testing after the Kruskal-Wallis test. The smear layer scores of apical thirds were significantly higher than coronal and middle thirds except for NaOCl + CI group (p < 0.001). The irrigation with PUI improved the efficacy of all irrigation solutions on removal of smear layer in both coronal and middle thirds (p < 0.001). The PUI activation increased the activity of NaOCl, EDTA, and QMix, respectively without any significance. All irrigation regimens were significantly more effective in coronal and middle thirds compared to apical third. PUI significantly increased the efficacy of smear layer removal regardless of irrigation solution.
RESUMO
BACKGROUND: The type of instrument affects the amount of debris extruded. The aim of this study was to compare the effect of retreatment systems and supplementary file application on the amount of apical debris extrusion. MATERIALS AND METHODS: Forty-eight extracted mandibular premolars with a single canal and similar length were selected. The root canals were prepared with the ProTaper Universal system with a torque-controlled engine. The root canals were dried and were obturated using Gutta-percha and sealer. The specimens were randomly divided into four equal groups according to the retreatment procedures (Group 1, Mtwo retreatment files; Group 2, Mtwo retreatment files + Mtwo rotary file #30 supplementary file; Group 3, ProTaper Universal retreatment (PTUR) files; and Group 4, PTUR files + ProTaper F3 supplementary file). The extruded debris during instrumentation were collected into preweighed Eppendorf tubes. The amount of apically extruded debris was calculated by subtracting the initial weight of the tube from the final weight. Three consecutive weights were obtained for each tube. RESULTS: No statistically significant difference was found in the amount of apically extruded debris between Groups 1 and 3 (P = 0.590). A significant difference was observed between Groups 1 and 2 (P < 0.05), and between Groups 3 and 4 (P < 0.05). CONCLUSIONS: The use of supplementary file significantly increased the amount of apically extruded debris.
RESUMO
BACKGROUND: An ideal root canal obturation requires a complete dentinal wall adaptation of sealer and Gutta-percha combinations without any gap formations. AIMS: The aim of the study was to evaluate the dentinal wall adaptation ability of MTA Fillapex root canal sealer using stereo electron microscope (SEM). METHODS: Twenty-four, single-rooted, human maxillary incisor teeth were used. All canals were prepared with a rotary nickel-titanium (Ni-Ti) instrument to a size F3 file. Teeth divided into two equal groups and one of the experimental groups was filled with AH Plus, and the other group was filled with MTA Fillapex using Gutta-percha single cone as a core material. The roots were prepared for SEM evaluation, and serial scanning electron photomicrographs were taken at ×50, ×100, ×500, and ×1000 magnifications. The gaps between the root canal sealer and canal walls were detected and measured in coronal, middle, and apical thirds. For each section, the highest value among the detected gap formations was recorded. STATISTICAL ANALYSIS: Mann-Whitney U-test, Freidman, and Wilcoxon tests were used. RESULTS: The statistical analysis showed no significant difference between two sealers in terms of gap formation (P > 0.05). CONCLUSIONS: MTA Fillapex has a similar dentinal wall adaptation ability as AH Plus does.
RESUMO
AIM: The aim of this study was to compare the efficacy of hand file, nickel titanium rotary instrument, and two reciprocating instruments for removing gutta-percha and sealer from the root canals. MATERIALS AND METHODS: Eighty-eight mandibular premolar teeth were used. The root canals were shaped and filled with gutta-percha and a resin-based sealer. The specimens were divided into four groups according to the technique by which the root filling material was removed: Group 1 - Wave One; Group 2 - Reciproc; Group 3 - ProTaper; and Group 4 - Gates-Glidden burs and stainless steel hand file. Then teeth were split longitudinally and photographed. The images were transferred to a computer. The ratio of remaining filling material to the root canal periphery was calculated with the aid of ImageJ software. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney tests. RESULTS: A significant difference was found among all groups (P < 0.001). The WaveOne group demonstrated significantly less remaining filling material. The greatest amount of filling material was found in specimens where gutta-percha was removed with Gates-Glidden burs and stainless steel hand file. CONCLUSION: The reciprocating files were found to be significantly more effective in removing the filling material from the canal walls compared to the rotational file and hand file.
RESUMO
OBJECTIVE: The aim of this study was to compare the efficacy of QMiX and ethylenediaminetetraacetic acid (EDTA) solutions with diode laser treatment in smear layer removal. BACKGROUND DATA: Removing the smear layer from the apical thirds of root canals is difficult, regardless of the solution used. Researchers have been improved some irrigation agitation methods to overcome this challenge, and agitation of irrigants with laser devices has become popular. METHODS: Seventy-five extracted mandibular premolars were used. After root canals were, prepared the specimens were divided into five groups (n = 15): Group 1, no irrigation; Group 2, 17% EDTA; Group 3, QMiX solution; Group 4, 17% EDTA with diode laser; and Group 5, QMiX with diode laser. The roots were split longitudinally and prepared for scanning electron microscopic (SEM) investigation. The smear layer was evaluated under × 500, × 1000, and × 2000 magnifications. RESULTS: The amount of smear layer was found significantly high in the control group (p < 0.001). In the EDTA group, the amount of smear layer was significantly high at the apical thirds, and the differences among the three regions were statistically significant (p < 0.001). In the QMiX group, no difference was found between the coronal and middle thirds; however, the amount of smear layer was significantly high at the apical thirds (p < 0.001). In the EDTA plus laser and the QMiX plus laser groups, the smear layer was found significantly high at the apical thirds (p < 0.001). However, no differences were found between the coronal and middle thirds in either group. CONCLUSIONS: None of the solutions completely removed the smear layer, especially at the apical thirds. Diode laser treatment with solutions decreased the amount of smear layer, without significance.
Assuntos
Biguanidas/farmacologia , Ácido Edético/farmacologia , Lasers Semicondutores/uso terapêutico , Polímeros/farmacologia , Camada de Esfregaço/terapia , Humanos , Microscopia Eletrônica de Varredura , Pessoa de Meia-Idade , Camada de Esfregaço/tratamento farmacológico , Camada de Esfregaço/patologiaRESUMO
Introduction. Root fractures, defined as fractures involving dentine, cementum, and pulpal and supportive tissues, constitute only 0.5-7% of all dental injuries. Horizontal root fractures are commonly observed in the maxillary anterior region and 75% of these fractures occur in the maxillary central incisors. Methods. A 14-year-old female patient was referred to our clinic three days after a traffic accident. In radiographic examination, the right maxillary central incisor was fractured horizontally in apical thirds. Initially, following local infiltrative anesthetics, the coronal fragment was repositioned and this was radiographically confirmed. Then the stabilization splint was applied and remained for three months. After three weeks, according to the results of the vitality tests, the right and left central incisors were nonvital. For the right central incisor, both the coronal and apical fragments were involved in the endodontic preparation. Results. For the right central tooth, both the coronal and apical root fragments were endodontically treated and obturated at a single visit with white mineral trioxide aggregate whilst the fragments were stabilized internally by insertion of a size 40 Hedstrom stainless-steel endodontic file into the canal. Conclusion. Four-year follow-up examination revealed satisfactory clinical and radiographic findings with hard tissue repair of the fracture line.
RESUMO
OBJECTIVE: The aim of this study was to evaluate the color and enamel structure changes after intracoronal bleaching with sodium perborate under neodymium:yttrium-aluminum-garnet (Nd:YAG) and diode laser irradiation. BACKGROUND DATA: Although some studies investigated the efficacy of laser irradiation during intracoronal bleaching, no study has been conducted to investigate the changes in both color and enamel structure during intracoronal bleaching with laser irradiation. METHODS: Thirty-six extracted mandibular incisors were used. The root canals were prepared and filled with AH Plus and gutta-percha. Baseline color values and Raman spectra were obtained from all samples. The samples were randomly divided into three groups as follows: group 1, intracoronal bleaching with sodium perborate plus NdYAG laser irradiation; group 2, intracoronal bleaching with sodium perborate plus diode laser irradiation; and group 3, intracoronal bleaching with sodium perborate without any laser irradiation. Following the bleaching procedures, the final baseline color values and Raman spectra were obtained. The baseline and final values were statistically analyzed. Statistical analyses were performed with SPSS 18.0 software using Anova and the Kruskal-Wallis test. RESULTS: There was a significant difference between the Nd:YAG laser and control groups (p<0.05). There was no significant difference between the diode laser group and the control group, or the diode laser group and the Nd:YAG laser group. There was no significant difference among all groups in terms of Raman relative intensity (RRI) and fluorescence intensity (FI) percentage values (p>0.05). CONCLUSIONS: Laser application, especially Nd:YAG laser irradiation, was able to increase the efficacy of intracoronal bleaching with sodium perborate. Laser irradiation significantly increased the bleaching efficacy without any changes in the enamel surface structure.
Assuntos
Boratos , Esmalte Dentário/efeitos da radiação , Lasers Semicondutores , Lasers de Estado Sólido , Terapia com Luz de Baixa Intensidade , Clareamento Dental , Esmalte Dentário/efeitos dos fármacos , Humanos , Análise Espectral Raman , Técnicas de Cultura de TecidosRESUMO
The aim of this study was to evaluate the dentinal microcrack formation of ProTaper Universal, ProTaper Next, and WaveOne. Sixty extracted mandibular molars were selected. The mesial roots were resected and randomly divided into four groups (n = 15). The canals were prepared with hand files (group 1), ProTaper Universal (group 2), ProTaper Next (group 3), and WaveOne (group 4) instrument systems. The roots were separated horizontally at 3, 6, and 9 mm from the apex. Digital images were captured at ×40 magnification using scanning electron microscopy to detect microcrack formation. Statistical analysis was performed by Pearson Chi-square test. The prevalence of microcracks in group 2, group 3, and group 4 were significantly higher when compared to group 1 (p < 0.001). Group 2, group 3, and group 4 demonstrated similar prevalence of microcracks without significant difference (p > 0.05) in all sections. All instruments caused microcracks except for hand file. The highest percentage of microcrack was recorded in 3 mm section for all groups.
Assuntos
Cavidade Pulpar/patologia , Preparo de Canal Radicular/efeitos adversos , Preparo de Canal Radicular/métodos , Humanos , Microscopia Eletrônica de Varredura/métodosRESUMO
The aim of this study was to evaluate the effect of glide path preparation on the surface topography changes of WaveOne and OneShape single files using atomic force microscopy analysis. Two commercially available brands of single file systems were analyzed, including 15 specimens/brand as following: Group I; WaveOne 0.08/25 (Dentsply Maillefer, Ballaigues, Switzerland) and Group II; OneShape 0.06/25 (Micro Mega, Besançon, France). In each group, 3 new files were subjected to AFM analysis as received from manufacturer, and 12 files were analyzed after preparation of root canals. A total of 20 human maxillary molar teeth were selected. In each group, 12 files were divided into 4 subgroups according to instruments that were used in one or three root canals with or without a previous glide path (n = 3). After preparation the surface analysis of single files was performed on 11 different points located along a 3-mm section starting at the tip of each file using AFM. Root mean square (RMS) values were recorded to investigate the surface features of endodontic files. The differences between RMS values were tested by one-way ANOVA. There was no statistically significant difference between the groups (p > 0.05). Creation of a glide path did not affect the surface topography of single file systems.
Assuntos
Cavidade Pulpar/ultraestrutura , Preparo de Canal Radicular/instrumentação , Preparo de Canal Radicular/métodos , Humanos , Microscopia de Força Atômica , Dente Molar , Propriedades de SuperfícieRESUMO
The aim of this study was to compare in vitro reduction of Enterococcus faecalis by using three agitation methods. Fifty-five mandibular premolar teeth were used. The root canals were prepared by using ProTaper instruments to size F4. Fresh bacterial suspensions were inoculated into each canal and the teeth were incubated at 37°C under aerobic conditions for 3 weeks. The specimens in negative control group were not contaminated and the teeth in positive control receive no further instrumentation or irrigation after contamination. The contaminated teeth were divided into three experimental groups and two control groups. The experimental groups were as follows according to agitation of NaOCl irrigation solution; group 1, the brush-covered NaviTip FX needle; group 2, EndoVac apical negative pressure irrigation system; and group 3, self-adjusting file (SAF). Following the final irrigation, samples obtained with sterile #40 H-file from teeth and the file used were placed into sterile microcentrifuge tubes. After the incubation period, bacterial colony numbers were noted as CFU/ml. Three teeths were randomly selected from each group for scanning electron microscope evaluation. The three groups were compared with the Kruskal-Wallis test. Comparisons between three groups were made with the Mann-Whitney U-test with Bonferroni correction. SAF was significantly effective in elimination of E. faecalis when compared to EndoVac (p < 0.05). There was no difference between NaviTip FX needle and other two methods (p > 0.05). In conclusion, agitation of NaOCl with SAF for 2 min may be an effective alternative approach.
Assuntos
Cavidade Pulpar/microbiologia , Odontologia/métodos , Desinfecção/métodos , Enterococcus faecalis/isolamento & purificação , Hipoclorito de Sódio/uso terapêutico , Irrigação Terapêutica/métodos , Contagem de Colônia Microbiana , Cavidade Pulpar/efeitos dos fármacos , Enterococcus faecalis/efeitos dos fármacos , Microscopia Eletrônica de Varredura , Preparo de Canal Radicular/métodos , Propriedades de SuperfícieRESUMO
The aim of this clinical study was to test the efficacy of a light-emitting diode (LED) light and a diode laser, when bleaching with sodium perborate. Thirty volunteers were selected to participate in the study. The patients were randomly divided into two groups. The initial colour of each tooth to be bleached was quantified with a spectrophotometer. In group A, sodium perborate and distilled water were mixed and placed into the pulp chamber, and the LED light was source applied. In group B, the same mixture was used, and the 810 nm diode laser was applied. The final colour of each tooth was quantified with the same spectrophotometer. Initial and final spectrophotometer values were recorded. Mann-Whitney U-test and Wicoxon tests were used to test differences between both groups. Both devices successfully whitened the teeth. No statistical difference was found between the efficacy of the LED light and the diode laser.