RESUMO
This study demonstrated that polymerization behavior of plant oil-based acrylic monomers (POBMs) synthesized in one-step transesterification reaction from naturally rich in oleic acid olive, canola, and high-oleic soybean oils is associated with a varying mass fraction of polyunsaturated fatty acid fragments (linoleic (C18:2) and linolenic (C18:3) acid esters) in plant oil. Using miniemulsion polymerization, a range of stable copolymer latexes was synthesized from 60 wt.% of each POBM and styrene to determine the impact of POBM chemical composition (polyunsaturation) on thermal and mechanical properties of the resulted polymeric materials. The unique composition of each plant oil serves as an experimental tool to determine the effect of polyunsaturated fatty acid fragments on POBM polymerization behavior and thermomechanical properties of crosslinked films made from POBM-based latexes. The obtained results show that increasing polyunsaturation in the copolymers results in an enhanced crosslink density of the latex polymer network which essentially impacts the mechanical properties of the films (both Young's modulus and toughness). Maximum toughness was observed for crosslinked latex films made from 50 wt.% of each POBM in the monomer feed.
Assuntos
Acrilatos/metabolismo , Ácidos Graxos/metabolismo , Óleos de Plantas/metabolismo , Polímeros/metabolismo , EmulsõesRESUMO
In recent years, polymer chemistry has experienced an intensive development of a new field regarding the synthesis of aliphatic and aromatic biobased monomers obtained from renewable plant sources. A one-step process for the synthesis of new vinyl monomers by the reaction of direct transesterification of plant oil triglycerides with N-(hydroxyethyl)acrylamide has been recently invented to yield plant oil-based monomers (POBMs). The features of the POBM chemical structure, containing both a polar (hydrophilic) fragment capable of electrostatic interactions, and hydrophobic acyl fatty acid moieties (C15-C17) capable of van der Waals interactions, ensures the participation of the POBMs fragments of polymers in intermolecular interactions before and during polymerization. The use of the POBMs with different unsaturations in copolymerization reactions with conventional vinyl monomers allows for obtaining copolymers with enhanced hydrophobicity, provides a mechanism of internal plasticization and control of crosslinking degree. Synthesized latexes and latex polymers are promising candidates for the formation of hydrophobic polymer coatings with controlled physical and mechanical properties through the targeted control of the content of different POBM units with different degrees of unsaturation in the latex polymers.
Assuntos
Acrilatos/química , Materiais Biocompatíveis/química , Emulsões , Óleos de Plantas/química , Polimerização , Polímeros/química , Interações Hidrofóbicas e HidrofílicasRESUMO
Macromolecules of amphiphilic invertible polymers (AIPs) are capable of self-assembly into micellar assemblies of various morphologies in solvents of different polarities. The micellar assemblies in aqueous media are capable of encapsulating poorly aqueous soluble cargo and can undergo inverse conformational change and cargo release in contact with non-polar media, including potentially, cell membranes. Thus, invertible micellar assemblies have significant potential in drug delivery and related domains. However, to date there have been few investigations into their interactions with lipid membranes. Herein, we investigate the interactions of three recently developed AIPs of varying hydrophobicity/hydrophilicity balance with a highly fluidic microcavity supported 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) lipid bilayer. We combined electrochemical impedance spectroscopy (EIS) with fluorescence correlation spectroscopy (FCS) to understand how the AIP micellar assemblies impacted bilayer permeability and fluidity respectively, across polymer concentrations above and below their critical micelle concentrations (cmcs). At concentration as above their cmcs, all of the AIPs explored increased permeability and decreased the fluidity of the lipid membrane. The extent of impact depended on the hydrophobicity of the AIP. PEG600-PTHF650, the most hydrophobic of the polymers, synthesized from PEG (molecular weight 600â¯g/mol) and PTHF (molecular weight 650â¯g/mol) exerted the greatest influence on the bilayer's physical properties and fluorescence imaging and correlation data indicate that PEG600-PTHF650 micelles loaded with BODIPY probes adsorb and invert at the lipid membrane with release of cargo into the bilayer. This study should help inform future advancement of AIPs for membrane molecular delivery.
Assuntos
Butileno Glicóis/química , Bicamadas Lipídicas/química , Polietilenoglicóis/química , Polímeros/química , Espectroscopia Dielétrica , Difusão , Corantes Fluorescentes/química , Interações Hidrofóbicas e Hidrofílicas , Micelas , Conformação Molecular , Permeabilidade , Fosfatidilcolinas/química , Solventes/química , Espectrometria de FluorescênciaRESUMO
Vinyl monomers from soybean, sunflower, linseed, and olive oils were copolymerized with styrene (St), methyl methacrylate (MMA), and vinyl acetate (VAc) to determine the reactivity of biobased monomers in radical copolymerization, as well as their feasibility in emulsion processes for the synthesis of biobased latexes. Radical copolymerization of plant-oil-based monomers is described with the classical Mayo-Lewis equation. Using emulsion (or miniemulsion) polymerization with MMA or VAc, stable aqueous polymer dispersions with latex particles measuring 80-160 nm and containing 3-35 wt % of biobased monomer units were successfully synthesized. The number-average molecular weight of the latex copolymers (20 000-150 000) decreases by increasing the degree of unsaturation in monomers and their content in the reaction feed. The presence of plant-oil-based fragments changes the T g of resulting copolymers from 105 to 79 °C in copolymerization with MMA and from 30 to 11 °C in copolymerization with Vac. As a result, biobased units provide considerable flexibility (elongation at break of about 250%) and improve the toughness of the normally rigid and brittle poly(MMA). Even a small amount (2-5%) of biobased fragments incorporated into the structure of poly(VAc) significantly improves water resistance and provides hydrophobicity to the resulting polymer latex films. The obtained results clearly indicate that the vinyl monomers from plant oils can be considered as good candidates for internal plasticization of polymeric materials through reducing intermolecular interactions in copolymers.
RESUMO
Systematic review of experimental and clinical data on the use of curcumin in the treatment of osteosarcoma is presented. The current status of curcumin's therapeutic potential against bone cancer is analyzed in regard to using polymeric micelles (including recently developed invertible, responsive, micelles) as a platform for curcumin delivery to treat osteosarcoma. The potential of micellar assemblies from responsive macromolecules in a controlled delivery of curcumin to osteosarcoma cells, and the release using a new inversion mechanism is revealed.
RESUMO
Amphiphilic invertible polymers (AIPs) are a new class of macromolecules that self-assemble into micellar structures and rapidly change structure in response to changes in solvent polarity. Using small-angle neutron scattering (SANS) data, we obtained a quantitative description of the invertible micellar assemblies (IMAs). The detailed composition and size of the assemblies (including the effect of temperature) were measured in aqueous and toluene polymer solutions. The results show that the invertible macromolecules self-assemble into cylindrical core-shell micellar structures. The composition of the IMAs in aqueous and toluene solutions was used to reveal the inversion mechanism by changing the polarity of the medium. Our experiments demonstrate that AIP unimers self-assemble into IMAs in aqueous solution, predominantly through interactions between the hydrophobic moieties of macromolecules. The hydrophobic effect (or solvophobic interaction) is the major driving force for self-assembly. When the polarity of the environment is changed from polar to nonpolar, poly(ethylene glycol) (PEG) and aliphatic dicarboxylic acid fragments of AIP macromolecules tend to replace each other in the core and the shell of the IMAs. However, neither the interior nor the exterior of the IMAs consists of fragments of a single component of the macromolecule. In aqueous solution, with the temperature increasing from 15 to 35 °C, the IMAs' mixed core from aliphatic dicarboxylic acid and PEG moieties and PEG-based shell change the structure. As a result of the progressive dehydration of the macromolecules, the hydration level (water content) in the micellar core decreases at 25 °C, followed by dehydrated PEG fragments entering the interior of the IMAs when the temperature increases to 35 °C.
Assuntos
Polietilenoglicóis/síntese química , Tensoativos/síntese química , Ácidos Dicarboxílicos/química , Micelas , Difração de Nêutrons , Polietilenoglicóis/química , Espalhamento a Baixo Ângulo , Solventes/química , Tensoativos/químicaRESUMO
Strategically designed amphiphilic invertible polymers (AIPs) are capable of (i) self-assembling into invertible micellar assemblies (IMAs) in response to changes in polarity of environment, polymer concentration, and structure, (ii) accommodating (solubilizing) substances that are otherwise insoluble in water, and (iii) inverting their molecular conformation in response to changes in the polarity of the local environment. The unique ability of AIPs to invert the molecular conformation depending on the polarity of the environment can be a decisive factor in establishing the novel stimuli-responsive mechanism of solubilized drug release that is induced just in response to a change in the polarity of the environment. The IMA capability to solubilize lipophilic drugs and deliver and release the cargo molecules by conformational inversion of polymer macromolecules in response to a change of the polarity of the environment was demonstrated by loading IMA with a phytochemical drug, curcumin. It was demonstrated that four sets of micellar vehicles based on different AIPs were capable of delivering the curcumin from water to an organic medium (1-octanol) by means of unique mechanism: AIP conformational inversion in response to changing polarity from polar to nonpolar. The IMAs are shown to be nontoxic against human cells up to a concentration of 10 mg/L. On the other hand, the curcumin-loaded IMAs are cytotoxic to breast carcinoma cells at this concentration, which confirms the potential of IMA-based vehicles in controlled delivery of poorly water-soluble drug candidates and release by means of this novel stimuli-responsive mechanism.
Assuntos
Butileno Glicóis/química , Curcumina/química , Micelas , Nanocápsulas/química , Polietilenoglicóis/química , Polímeros/química , Tensoativos/química , 1-Octanol/química , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Curcumina/metabolismo , Curcumina/farmacologia , Estabilidade de Medicamentos , Células HEK293 , Humanos , Interações Hidrofóbicas e Hidrofílicas , Transição de Fase , Solubilidade , Água/químicaRESUMO
Host-guest interactions between cyclohexasilane (Si(6)H(12)) and amphiphilic invertible macromolecules based on PEG and sebacic acid in acetonitrile (neither a solvent for cyclohexasilane nor a support for the micellization of amphiphilic invertible macromolecules) have been investigated. Despite the extended conformation of the macromolecules and the absence of self-assembled polymeric domains, a macromolecular amphiphilicity itself contributes to localizing Si(6)H(12) by AIP and thus enables Lewis acid-base interactions between Si(6)H(12) and the AIP carbonyl groups. The obtained results demonstrate an interesting phenomenon in that insoluble Si(6)H(12) can be localized by AIP macromolecules in a medium that does not support the formation of polymeric domains.
Assuntos
Acetonitrilas/química , Polietilenoglicóis/química , Silanos/química , Ácidos Decanoicos/química , Ácidos Dicarboxílicos/química , SolubilidadeRESUMO
The environment-dependent behavior of invertible polyesters has been studied by 1H NMR spectroscopy. In dilute toluene solutions, the micelle exterior is made up of the lipophilic fragments, and the interior consists of the hydrophilic constituents. The polyester inverts the structure in an aqueous medium to form micelles with a hydrophobic inner part and a hydrophilic outer part. Increasing polyester concentration leads to the formation of hierarchical structures both in toluene and in an aqueous medium as a result of the aggregation of unimolecular micelles and the formation of hydrophilic and lipophilic domains. On the contrary, no unimolecular micelles or micellar aggregation has been observed in acetone or chloroform.
RESUMO
In this study, highly stable gold and silver nanoparticles evenly distributed within a crosslinked poly(acrylamide)/poly(N-(hydroxymethyl)acrylamide) (PAAm-PHMAAm) network have been fabricated without addition of a reducing agent. Remarkably, the same chemical hydrogel composition has been involved in the successful fabrication of spherical gold and silver nanoparticles within the hydrogel template. The hydrogel network acts simultaneously as an efficient reducing agent and stabilizer. The PAAm-PHMAAm hydrogel network binds metal ions and, following reduction of bound to crosslinked template metal ions, proceeds via oxidation of hydroxymethyl hydrogel fragments. A one-electron mechanism is proposed for the formation of the silver and gold nanoparticles.
RESUMO
A silver complex is transformed into amphiphilic nanoparticles at room temperature using nanoreactors formed from an amphiphilic polyester. It takes a few minutes to form silver nanocolloids with a narrow particle size distribution. Developed silver forms a stable dispersion in both polar and nonpolar media. The amphiphilic polyester acts as a reducing and stabilizing agent simultaneously. The size of the synthesized amphiphilic silver nanoparticles depends on the concentration of the invertible polyester and solvent polarity.
RESUMO
We synthesized and characterized novel amphiphilic polyesters with both hydrophilic and hydrophobic functionalities. The polyesters are soluble in organic and aqueous media and reveal the formation of inverse architectures whose behavior could be correlated to their chemical structure. We foresee that the amphiphilic properties of the polyesters reported here are obviously the basis of new architectures both in solution and on the solid surfaces, which could be used in a broad range of applications. The described synthesis of the copolymers is very simple and is based on commercially available products. That makes this approach attractive in various uses.