Comparing the crystal structures and spectroscopic properties of a p-hydroxy styrylquinolinium dye with those of its p-dimethylamino analogue.

Two previously synthesized styrylquinolinium dyes, namely (E)-1-butyl-4-(4-(dimethylamino)styryl)quinolinium iodide (D36) and (E)-1-butyl-4-(4-hydroxystyryl)quinolinium iodide (D34), were compared in terms of their properties by single-crystal X-ray diffraction (XRD), Hirshfeld surface analysis, Fourier transform Raman (FT-Raman), Fourier transform infrared (FT-IR), fluorescence, and ultraviolet-visible (UV-Vis) spectroscopy, and 1H- and 13C-NMR methods. Both dyes D36 and D34 crystallized in the triclinic and monoclinic systems in the centrosymmetric space groups P-1 and P21/n, respectively. The unit cell of D36 contains two molecules of the dye, participating in weak intermolecular interactions, whereas that of D34 contains four formula units. The phenolic hydroxy group of D34 participates in the formation of a hydrogen bond with the iodide anion. The 4-styrylquinolinium moieties of the cationic dye molecules are nearly planar. The dihedral angle between the mean planes through the ten-membered quinolinium system and the benzene ring is 7.5° in D36 and 5.9(1)° in D34. The structural parameters planarity and bond length alternation (BLA) are discussed, which are important for the evaluation of the first hyperpolarizability ß at the molecular level, even in a centrosymmetric crystal. The UV-visible spectra of the dyes in 14 solvents of different polarities were investigated. The reversible solvatochromic behavior of the dyes is demonstrated experimentally and compared with known "binuclear dyes" by evaluating the Rezende model. Dye D36 does not fluoresce, and D34 has a very low emission in the solvents tested.

Pyridin-4-ylmethanaminium perchlorate mono-hydrate.

Pyridin-4-ylmethanaminium perchlorate monohydrate (synonym: 4-picolyl-ammonium perchlorate monohydrate), C6H9N2 +·ClO4 -·H2O, crystallizes in the monoclinic system (space group P21/n) with the asymmetric unit comprising two formula units (Z' = 2). All mol-ecular entities are located on general positions. The two crystallographically distinct 4-picolyl-ammonium cations exhibit different conformations. The two unique perchlorate anions are non-disordered, showing an r.m.s. deviation of 0.011 Šfrom mol-ecular T d symmetry. The supra-molecular structure in the solid state features an intricate tri-periodic network of N-H⋯O, O-H⋯N and O-H⋯O hydrogen bonds.

N,N-Diethyl-N'-[(E)-4-pyridylmethylene]benzene-1,4-diamine: a combined X-ray and density functional theory study.

The crystal structure of the title compound, C16H19N3, comprises neutral molecules of a dipolar Schiff base chromophore. A density functional theory (DFT) optimized structure at the B3LYP/6-31G(d) level is compared with the molecular structure in the solid state. The compound crystallizes in the noncentrosymmetric space group Pna2(1) with a herring-bone packing motif and is therefore a potential candidate for nonlinear optical effects in the bulk.

Synthesis, spectroscopic and structural elucidation of tyrosinamide hydrogensquarate monohydrate.

Synthesis, isolation, spectroscopic and structural elucidation of tyrosinamide hydrogensquarate monohydrate (I) is reported on the basis of quantum chemical DFT calculations, vibrational analysis and experimental linear-polarized IR-spectroscopy in solid state. These data are compared with those obtained using single crystal X-ray diffraction, which show that the molecules of (I) in the unit cell formed 3D network through moderate intermolecular (Tyr)OH...O = C(Sq) (2.727 A), O=C-NH2...OH(Tyr) (2.991 A), O=C-NH2...OH(Sq) (2.988 A), O=C-NH2...O=C-NH2 (3.068 A), N+H3...O=C(Sq) (2.737, 2.953, 2.954 A), OH2...O=C(Sq) (2.839 A) and (Sq)OH...OH2 (2.607 A) hydrogen bonds. The relationship between the structure and spectroscopic properties is studied.

Synthesis, spectroscopic and structural elucidation of sympathomimetic amine, tyraminium dihydrogenphosphate.

The synthesis, isolation, spectroscopic and structural elucidation of sympathomimetic amine, tyramine dihydrogenphosphate are of interest due to its biological activity and the establishing correlation between spectroscopic properties and structure. The complex approach for investigation included single crystal X-ray diffraction, new technique in linear-polarized IR-spectroscopy in solid state and quantum chemical calculations with a view to predict the electronic structure and vibrational data of interacting species in entitled compound, the correlation structure-spectroscopic properties as well as the influence of intermolecular interaction on IR-characteristic bands are carried out.

Structural and spectroscopic elucidation of tetrapetide glycyl-(L)-prolyl-glycyl-glycine and its hydrogensquarate.

The IR-spectroscopic and structural elucidation of tetrapeptide glycyl-(L)-prolyl-glycyl-glycine and its hydrogensquarate was performed by employing linear-polarized IR-spectroscopy of oriented colloid suspensions in nematic host as well as mass spectrometry. Quantum-chemical ab initio calculations were carried out in order to evaluate both the electronic structure and optical properties of the compound studied.

Determination of cephalosporins in solid binary mixtures by polarized IR- and Raman spectroscopy.

Quantitative IR- and Raman spectroscopic determinations of four cephalosporin antibiotics in six solid binary mixtures have been conducted. This is a new approach for spectroscopic determination of these antibiotics, since the corresponding quantitative analysis in solution only has been reported so far. The correlation coefficient r2 was found to be in the confidence intervals within 99.32-99.88% and 99.90-95.54% for the systems under study by using the absorption ratios of the characteristic bands at 800 cm(-1) and 721 cm(-1) present in the IR- and Raman spectra of the antibiotic compounds cephalexin, cephalotin, cephaloglycin and cephamandole, respectively. Solid-state linear dichroic infrared (IR-LD) spectral analysis of the solid mixtures was carried out in order to obtain experimental IR-spectroscopic assignment of the compounds studied. Independent high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) analysis was performed for the validation of the vibrational spectroscopic data. The application of this instrumental analytical tool for the analysis of 10 tablets of the commercial products Cefamandole and Cefalotin (Actavis) was also studied.

Determination of phenacetin and salophen analgetics in solid binary mixtures with caffeine by infrared linear dichroic and Raman spectroscopy.

Quantitative infrared (IR) and Raman spectroscopic approach for determination of phenacetin (Phen) and salophen (Salo) in binary solid mixtures with caffeine: phenacetin/caffeine (System 1) and salophen/caffeine (System 2) is presented. Absorbance ratios of 746 cm(-1) or 721 cm(-1) peaks (characteristic for each of determined compounds in the Systems 1 and 2) to 1509 cm(-1) and 1616 cm(-1) (attributed to Phen and Salo, respectively) were used. The IR spectroscopy gives confidence of 98.9% (System 1) and 98.3% (System 2), while the Raman spectroscopic data are with slightly higher confidence of 99.1% for both systems. The limits of detection for the compounds studied were 0.013 and 0.012 mole fraction for IR and Raman methods, respectively. Solid-state linear dichroic infrared (IR-LD) spectral analysis of solid mixtures was carried out with a view to obtaining experimental IR spectroscopic assignment of the characteristic IR bands of both determined compounds. The orientation technique as a nematic liquid crystal suspension was used, combined with the so-called reducing-difference procedure for polarized spectra interpretation. The possibility for obtaining supramolecular stereo structural information for Phen and Salo by comparing spectroscopic and crystallographic data has also been shown. An independent high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) analysis was performed for comparison and validation of vibrational spectroscopy data. Applications to 10 tablets of commercial products APC and Sedalgin are given.

Synthesis, spectroscopic and structural elucidation of 3-ethylamino-2-(4-nitro-benzoyl)-but-2-enoic acid phenylamide.

3-Ethylamino-2-(4-nitro-benzoyl)-but-2-enoic acid phenylamide is synthesized, isolated, spectroscopical and structural characterized by means of linear-polarized IR-spectroscopy (IR-LD) of oriented solids as a colloidal suspension in nematic liquid crystal. The experimental IR-band assignment and structural information are supported by quantum chemical calculations at MP2 and B3LYP level of theory and 6-311++G** basis set. The geometry is characterized by two inramolecular hydrogen bonds of NH...O=C with bond lengths of 2.589 and 3.449 angstroms. The NHO angles are 142.1(3) degrees and 125.8(4) degrees , respectively. A transoide configuration of amide fragments is predicted with a torsion NH-C=O angle of 150.6 degrees . Phenyl fragments are mutually perpendicular oriented closing an angle of 92.6 degrees .

Spectroscopic and structural elucidation of L-tyrosine-containing dipeptides valyl-tyrosine and tyrosyl-alanine: solid-state IR-LD spectroscopy, quantum chemical calculations and vibrational analysis.

L-Tyrosine-containing dipeptides valyl-tyrosine (H-Val-Tyr-OH) and tyrosyl-alanine (H-Tyr-Ala-OH) are characterized structurally by means of quantum chemical ab initio calculations and solid-state linear-dichroic infrared (IR-LD) spectroscopy. The IR-characteristic bands are assigned by application of reducing-difference procedure for polarized IR-spectra interpretation. Infrared data obtained are supported as well by the made vibrational analysis. The structures of both peptides are predicted on the basis of conformational analysis and structural information, obtained by the shown IR-spectroscopic tool.

Structural and spectroscopic analysis of hydrogensquarates of glycine-containing tripeptides.

The hydrogensquarates of glycine-containing tripeptides glycylglycylglycine (H-Gly-Gly-Gly-OH), glycylglycylmethionine (H-Gly-Gly-Met-OH), and methionylglycylglycine (H-Met-Gly-Gly-OH) have been characterized structurally. Quantum chemical ab initio calculations, solid-state linear-dichroic infrared (IR-LD) spectroscopy, 1H and 13C NMR data, ESI-MS, HPLC-MS/MS, TGV, and DSC methods were employed. The structures consist in a positively charged peptide moiety and a negative hydrogensquarate anion (HSq), stabilized by strong intermolecular hydrogen bonds.

Experimental and computational studies of the structure and vibrational spectra of aminomethyl-dimethyl-phosphine oxide and its 15N labeled isomer.

Infrared (4000-100 cm(-1)) spectra of aminomethyl-dimethyl-phosphine oxide and 15N-aminomethyl-dimethyl-phosphine oxide have been measured. Geometric parameters (bond distances and angles), net electronic charges and vibrational spectroscopic data of both compounds calculated at various levels of theory (B3LYP/6-31G* and Moeller-Plesset perturbational theory (MP2)/6-31G*) are reported. The theoretical spectral results are discussed mainly in terms of comparison with infrared (4000-100 cm(-1)) spectral data. Better coincidence was achieved with the frequencies calculated at the MP2/6-31G* level: the standard deviation is 16 cm(-1). The calculated isotopic frequency shifts, induced by the 15N labeling, are in good accordance with the measured ones. Complete vibrational assignment is made with the help of MP2 force field calculations. Data obtained here are used to reassign some of the vibrational frequencies.

Experimental and computational studies of the structure and vibrational spectra of 2-[5,5-dimethyl-3-(2-phenyl-vinil)-cyclohex-2-enylidene]-malononitrile.

The FTIR spectra (4000-100 cm(-1)) and Raman spectra (3500-30 cm(-1)) of 2-[5,5-dimethyl-3-(2-phenyl-vinil)-cyclohex-2-enylidene]-malononitrile in solid state were measured. In addition, the structure and harmonic vibrational frequencies of this molecule were theoretically evaluated using B3LYP density functional methods. The computed vibrational frequencies are used to determine the types of molecular motions associated with each of the experimental bands observed. Bond length alternation (BLA) was established. Comparison with the experimental spectra provides important information about the ability of this computational method to describe the vibrational modes in this type of "push-pull" systems with potential non-linear optical applications.

Experimental and computational studies of the structure and vibrational spectra of pyridinium-betaine of squaric acid.

The FTIR spectra of pyridinium-betaine of squaric acid in 4000-100 cm(-1) frequency region in solid state were measured. In addition, the structure and harmonic vibrational frequencies of this molecule were theoretically evaluated using restricted Hartree-Fock and B3LYP density functional methods. The computed vibrational frequencies are used to determine the types of molecular motions associated with each of the experimental bands observed. Comparison with the experimental spectra provides important information about the ability of these computational methods to describe the vibrational modes in these highly polar strained ring compounds.

Vibrational spectra and structure of benzil and its 18O- and d10-labelled derivatives: a quantum chemical and experimental study.

Geometry and vibrational spectroscopic data of benzil-d0 benzil-d10 and benzil-18O calculated at various levels of theory (RHF/6-31G*, B3LYP/6-31G*, BLYP/6-31G*) are reported. The theoretical results are discussed mainly in terms of the comparisons with infrared (4000-100 cm(-1)) and Raman (4000-50 cm(-1)) spectral data. The calculated isotopic frequency shifts, induced by the 18O- and d10-labeling, are in a good agreement with the measured values. A complete vibrational assignment was made with the help of ab initio force field calculations. The data thus obtained were used for reassigning some vibrational frequencies. The results of the optimized molecular structure obtained on the basis of RHF and the DFT calculations are presented and compared with the experimental X-ray diffraction for the benzil-d0 single crystal. It turns out that the best structural parameters are predicted by the B3LYP/6-31G* method.