Automatic feedback control of an Er-doped fiber laser with an intracavity loss modulator.

Suppression of Q-switching instabilities with an actively controlled intracavity loss modulator is demonstrated in an Er-doped waveguide laser that is mode locked with a slow saturable absorber at repetition rates of as much as 100 MHz. By automatic gain control in the feedback loop, stable mode locking is achieved over the entire parameter range of the laser. This approach renders laser stabilization independent of the characteristics of the gain medium and intracavity power. The pulse-shaping dynamics is not affected by the presence of the intracavity loss modulator.

Large-area broadband saturable Bragg reflectors by use of oxidized AlAs.

Broadband saturable Bragg reflectors (SBRs) are designed and fabricated by monolithic integration of semiconductor saturable absorbers with broadband Bragg mirrors. The wet oxidation of AlAs creates low-index AlxOy layers for broadband, high-index-contrast AlGaAs/AlxOy or InGaAlP/AlxOy mirrors. SBR mirror designs indicate greater than 99% reflectivity over bandwidths of 294, 466, and 563 nm for center wavelengths of 800, 1300, and 1550 nm, respectively. Highly strained and unstrained absorbers are stably integrated with the oxidized mirrors. Large-scale lateral oxidation techniques permit the fabrication of SBRs with diameters of 500 microm. Large-area, broadband SBRs are used to self-start and mode lock a variety of laser systems at wavelengths from 800 to 1550 nm.

Attosecond active synchronization of passively mode-locked lasers by balanced cross correlation.

A balanced cross correlator, the optical equivalent of a balanced microwave phase detector, is demonstrated. Its use in synchronizing an octave-spanning Ti:sapphire laser and a 30-fs Cr:forsterite laser yields 300-attosecond timing jitter measured from 10 mHz to 2.3 MHz. The spectral overlap between the two lasers is strong enough to permit direct detection of the difference in carrier-envelope offset frequency between the two lasers.

Stabilization of an active harmonically mode-locked fiber laser using two-photon absorption.

Two-photon absorption provided by a semiconductor mirror structure is shown to reduce amplitude fluctuations significantly in a harmonically mo e-locked fiber ring laser. Pulse dropouts are eliminated in a laser that produces picosecond pulses at a repetition rate of 2 GHz.