Improving Recovery of Diatoms Bio-Silica Using Chemical Treatment with VAUS TM.

High-temperature baking is a typical method to remove organic matter from diatoms, but it's not suitable for bio-silica because of the high crystallinity. This study provides a method using the VAUS™ to remove organic matter from diatoms more quickly and biocompatibly. Organic matter was removed by using VAUS™, while NaOCl was utilized to remove the organic matter from the silicate frustule. The optimal frequency for organic matter removal was investigated to domestically produced M. nummuloides. The removal efficiency of TOC/TN was calculated and analyzed. The C and Si elements were analyzed in EDS, while visual confirmation of organic matter removal was analyzed by using XRD. TOC RE% at a frequency of 35kHz exhibited the highest value, indicating a statistically significant difference. XRD analysis demonstrated that the organic matter was almost removed using NaOCl compared to the high-temperature baked M. nummuloides. In the EDS analysis, there were significant differences in the C and Si elements with respect to frequency. This is very similar to the values from the positive control group, high-temperature baked M. nummuloides. This new procedure of applying periodic negative pressure to NaOCl pre-treatment is considered to be an effective method of chemically removing organic matter from diatoms.

A Reconfigurable Proangiogenic Hydrogel Patch Enabling Minimally Invasive Drug Delivery.

Hydrogel is widely used for the sustained delivery of bioactive molecules that can treat various injuries, diseases, and tissue defects. However, inserting hydrogel implants without disrupting their functionality and microstructure often requires a large incision, leading to potential complications, such as infection, scarring, and pain. The gel implant is often manually rolled and inserted through a catheter for a minimally invasive delivery. However, success heavily depends on the user's skills, which can inadvertently damage the implant. To address this issue, we developed a reconfigurable hydrogel patch that can self-fold into a small tube and unfold spontaneously after implantation through a catheter. The hydrogel path was assembled by layering a drug-releasing poly(ethylene glycol) diacrylate (PEGDA) hydrogel sheet onto a PEGDA and polyethylenimine (PEI) hydrogel sheet, which rapidly swells and degrades homogeneously at controlled rates. The dynamics of the self-folding and unfolding process could be controlled by differences in the expansion ratio and elastic modulus between the two gel layers according to a mathematical model that closely matched experimental results. The unfolding process triggered a sustained release of the protein cargo. Specifically, the reconfigurable gel loaded with angiopoietin 1 significantly enhanced neovascularization, nearly doubling the vascular density compared to the control group following implantation through a tube with 15% smaller diameter than the original shape of the gel patch. This gel biopatch will be broadly useful for the minimally invasive delivery of a wide array of therapeutic molecules, potentially enhancing therapeutic outcomes.

Effect of Circadian Rhythm Modulated Blood Flow on Nanoparticle based Targeted Drug Delivery in Virtual In Vivo Arterial Geometries.

Delivery of drug using nanocarriers tethered with vasculature-targeting epitopes aims to maximize the therapeutic efficacy of the drug while minimizing the drug side effects. Circadian rhythm which is governed by the central nervous system has implications for targeted drug delivery due to sleep-wake cycle changes in blood flow dynamics. This paper presents an advanced fluid dynamics modeling method that is based on viscous incompressible shear-rate fluid (blood) coupled with an advection-diffusion equation to simulate the formation of drug concentration gradients in the blood stream and buildup of concentration at the targeted site. The method is equipped with an experimentally calibrated nanoparticle-endothelial cell adhesion model that employs Robin boundary conditions to describe nanoparticle retention based on probability of adhesion, a friction model accounting for surface roughness of endothelial cell layer, and a dispersion model based on Taylor-Aris expression for effective diffusion in the boundary layer. The computational model is first experimentally validated and then tested on engineered bifurcating arterial systems where impedance boundary conditions are applied at the outflow to account for the downstream resistance at each outlet. It is then applied to a virtual geometric model of an in vivo arterial tree developed through MRI-based image processing techniques. These simulations highlight the potential of the computational model for drug transport, adhesion, and retention at multiple sites in virtual in vivo models. The model provides a virtual platform for exploring circadian rhythm modulated blood flow for targeted drug delivery while minimizing the in vivo experimentation. Statement of Significance: A novel integration of nanoparticle-based drug delivery framework with shear-rate dependent blood flow model is presented. The framework is comprised of a unique combination of mechanics-based dispersion model, an asperity model for endothelium surface roughness, and a stochastic nanoparticle-endothelial cell adhesion model. Simulations of MRI based in vivo carotid artery system showcase the effects of vessel geometry on nanoparticle adhesion and retention at the targeted site. Vessel geometry and target site location impact nanoparticle adhesion; curved and bifurcating regions favor local accumulation of drug. It is also shown that aligning drug administration with circadian rhythm and sleep cycle can enhance the efficacy of drug delivery processes. These simulations highlight the potential of the computational modeling for exploring circadian rhythm modulated blood flow for targeted drug delivery while minimizing the in vivo experimentation.

Modeling of spatiotemporal dynamics of ligand-coated particle flow in targeted drug delivery processes.

Nanoparticles tethered with vasculature-binding epitopes have been used to deliver the drug into injured or diseased tissues via the bloodstream. However, the extent that blood flow dynamics affects nanoparticle retention at the target site after adhesion needs to be better understood. This knowledge gap potentially underlies significantly different therapeutic efficacies between animal models and humans. An experimentally validated mathematical model that accurately simulates the effects of blood flow on nanoparticle adhesion and retention, thus circumventing the limitations of conventional trial-and-error-based drug design in animal models, is lacking. This paper addresses this technical bottleneck and presents an integrated mathematical method that derives heavily from a unique combination of a mechanics-based dispersion model for nanoparticle transport and diffusion in the boundary layers, an asperity model to account for surface roughness of endothelium, and an experimentally calibrated stochastic nanoparticle-cell adhesion model to describe nanoparticle adhesion and subsequent retention at the target site under external flow. PLGA-b-HA nanoparticles tethered with VHSPNKK peptides that specifically bind to vascular cell adhesion molecules on the inflamed vascular wall were investigated. The computational model revealed that larger particles perform better in adhesion and retention at the endothelium for the particle sizes suitable for drug delivery applications and within physiologically relevant shear rates. The computational model corresponded closely to the in vitro experiments which demonstrates the impact that model-based simulations can have on optimizing nanocarriers in vascular microenvironments, thereby substantially reducing in vivo experimentation as well as the development costs.

Neuronal innervation regulates the secretion of neurotrophic myokines and exosomes from skeletal muscle.

Myokines and exosomes, originating from skeletal muscle, are shown to play a significant role in maintaining brain homeostasis. While exercise has been reported to promote muscle secretion, little is known about the effects of neuronal innervation and activity on the yield and molecular composition of biologically active molecules from muscle. As neuromuscular diseases and disabilities associated with denervation impact muscle metabolism, we hypothesize that neuronal innervation and firing may play a pivotal role in regulating secretion activities of skeletal muscles. We examined this hypothesis using an engineered neuromuscular tissue model consisting of skeletal muscles innervated by motor neurons. The innervated muscles displayed elevated expression of mRNAs encoding neurotrophic myokines, such as interleukin-6, brain-derived neurotrophic factor, and FDNC5, as well as the mRNA of peroxisome-proliferator-activated receptor γ coactivator 1α, a key regulator of muscle metabolism. Upon glutamate stimulation, the innervated muscles secreted higher levels of irisin and exosomes containing more diverse neurotrophic microRNAs than neuron-free muscles. Consequently, biological factors secreted by innervated muscles enhanced branching, axonal transport, and, ultimately, spontaneous network activities of primary hippocampal neurons in vitro. Overall, these results reveal the importance of neuronal innervation in modulating muscle-derived factors that promote neuronal function and suggest that the engineered neuromuscular tissue model holds significant promise as a platform for producing neurotrophic molecules.

Delivery-mediated exosomal therapeutics in ischemia-reperfusion injury: advances, mechanisms, and future directions.

Ischemia-reperfusion injury (IRI) poses significant challenges across various organ systems, including the heart, brain, and kidneys. Exosomes have shown great potentials and applications in mitigating IRI-induced cell and tissue damage through modulating inflammatory responses, enhancing angiogenesis, and promoting tissue repair. Despite these advances, a more systematic understanding of exosomes from different sources and their biotransport is critical for optimizing therapeutic efficacy and accelerating the clinical adoption of exosomes for IRI therapies. Therefore, this review article overviews the administration routes of exosomes from different sources, such as mesenchymal stem cells and other somatic cells, in the context of IRI treatment. Furthermore, this article covers how the delivered exosomes modulate molecular pathways of recipient cells, aiding in the prevention of cell death and the promotions of regeneration in IRI models. In the end, this article discusses the ongoing research efforts and propose future research directions of exosome-based therapies.

Biofilm removal effect of diatom complex on 3D printed denture base resin.

For patients who have difficulty in mechanical cleaning of dental appliances, a denture cleaner that can remove biofilm with dense extracellular polymeric substances is needed. The purpose of this study is to evaluate the efficacy of diatom complex with active micro-locomotion for removing biofilms from 3D printed dentures. The diatom complex, which is made by doping MnO2 nanosheets on diatom biosilica, is mixed with H2O2 to generate fine air bubbles continuously. Denture base resin specimens were 3D printed in a roof shape, and Pseudomonas aeruginosa (107 CFU/mL) was cultured on those for biofilm formation. Cleaning solutions of phosphate-buffered saline (negative control, NC), 3% H2O2 with peracetic acid (positive control, PC), denture cleanser tablet (DCT), 3% H2O2 with 2 mg/mL diatom complex M (Melosira, DM), 3% H2O2 with 2 mg/mL diatom complex A (Aulacoseira, DA), and DCT with 2 mg/mL DM were prepared and applied. To assess the efficacy of biofilm removal quantitatively, absorbance after cleaning was measured. To evaluate the stability of long-term use, surface roughness, ΔE, surface micro-hardness, and flexural strength of the 3D printed dentures were measured before and after cleaning. Cytotoxicity was evaluated using Cell Counting Kit-8. All statistical analyses were conducted using SPSS for Windows with one-way ANOVA, followed by Scheffe's test as a post hoc (p < 0.05). The group treated with 3% H2O2 with DA demonstrated the lowest absorbance value, followed by the groups treated with 3% H2O2 with DM, PC, DCT, DCT + DM, and finally NC. As a result of Scheffe's test to evaluate the significance of difference between the mean values of each group, statistically significant differences were shown in all groups based on the NC group. The DA and DM groups showed the largest mean difference though there was no significant difference between the two groups. Regarding the evaluation of physical and mechanical properties of the denture base resin, no statistically significant differences were observed before and after cleaning. In the cytotoxicity test, the relative cell count was over 70%, reflecting an absence of cytotoxicity. The diatom complex utilizing active micro-locomotion has effective biofilm removal ability and has a minimal effect in physical and mechanical properties of the substrate with no cytotoxicity.

Graphene Hybrid Tough Hydrogels with Nanostructures for Tissue Regeneration.

Over the past few decades, hydrogels have attracted considerable attention as promising biomedical materials. However, conventional hydrogels require improved mechanical properties, such as brittleness, which significantly limits their widespread use. Recently, hydrogels with remarkably improved toughness have been developed; however, their low biocompatibility must be addressed. In this study, we developed a tough graphene hybrid hydrogel with nanostructures. The resultant hydrogel exhibited remarkable mechanical properties while representing an aligned nanostructure that resembled the extracellular matrix of soft tissue. Owing to the synergistic effect of the topographical properties, and the enhanced biochemical properties, the graphene hybrid hydrogel had excellent stretchability, resilience, toughness, and biocompatibility. Furthermore, the hydrogel displayed outstanding tissue regeneration capabilities (e.g., skin and tendons). Overall, the proposed graphene hybrid tough hydrogel may provide significant insights into the application of tough hydrogels in tissue regeneration.

Transparent Intracellular Sensing Platform with Si Needles for Simultaneous Live Imaging.

Vertically ordered Si needles are of particular interest for long-term intracellular recording owing to their capacity to infiltrate living cells with negligible damage and minimal toxicity. Such intracellular recordings could greatly benefit from simultaneous live cell imaging without disrupting their culture, contributing to an in-depth understanding of cellular function and activity. However, the use of standard live imaging techniques, such as inverted and confocal microscopy, is currently impeded by the opacity of Si wafers, typically employed for fabricating vertical Si needles. Here, we introduce a transparent intracellular sensing platform that combines vertical Si needles with a percolated network of Au-Ag nanowires on a transparent elastomeric substrate. This sensing platform meets all prerequisites for simultaneous intracellular recording and imaging, including electrochemical impedance, optical transparency, mechanical compliance, and cell viability. Proof-of-concept demonstrations of this sensing platform include monitoring electrical potentials in cardiomyocyte cells and in three-dimensionally engineered cardiovascular tissue, all while conducting live imaging with inverted and confocal microscopes. This sensing platform holds wide-ranging potential applications for intracellular research across various disciplines such as neuroscience, cardiology, muscle physiology, and drug screening.

Intracerebral Nanoparticle Transport Facilitated by Alzheimer Pathology and Age.

Nanoparticles have emerged as potential transporters of drugs targeting Alzheimer's disease (AD), but their design should consider the blood-brain barrier (BBB) integrity and neuroinflammation of the AD brain. This study presents that aging is a significant factor for the brain localization and retention of nanoparticles, which we engineered to bind with reactive astrocytes and activated microglia. We assembled 200 nm-diameter particles using a block copolymer of poly(lactic-co-glycolic acid) (PLGA) and CD44-binding hyaluronic acid (HA). The resulting PLGA-b-HA nanoparticles displayed increased binding to CD44-expressing reactive astrocytes and activated microglia. Upon intravascular injection, nanoparticles were localized to the hippocampi of both APP/PS1 AD model mice and their control littermates at 13-16 months of age due to enhanced transvascular transport through the leaky BBB. No particles were found in the hippocampi of young adult mice. These findings demonstrate the brain localization of nanoparticles due to aging-induced BBB breakdown regardless of AD pathology.

In-drop thermal cycling of microcrystal assembly for senescence control (MASC) with minimal variation in efficacy.

The secretome from mesenchymal stem cells (MSCs) has recently gained attention for new therapeutics. However, clinical application requires in vitro cell manufacturing to attain enough cells. Unfortunately, this process often drives MSCs into a senescent state that drastically changes cellular secretion activities. Antioxidants are used to reverse and prevent the propagation of senescence; however, their activity is short-lived. Polymer-stabilized crystallization of antioxidants has been shown to improve bioactivity, but the broad crystal size distribution (CSD) significantly increases the efficacy variation. Efforts were made to crystalize drugs in microdroplets to narrow the CSD, but the fraction of drops containing at least one crystal can be as low as 20%. To this end, this study demonstrates that in-drop thermal cycling of hyaluronic acid-modified antioxidant crystals, named microcrystal assembly for senescence control (MASC), can drive the fraction of microdrops containing crystals to >86% while achieving significantly narrower CSDs (13±3µm) than in bulk (35±11µm). Therefore, this approach considerably improves the practicality of CSD-control in drops. In addition to exhibiting uniform release, MASC made with antioxidizing N-acetylcysteine extended the release time by 40%. MASC further improves the restoration of reactive oxygen species homeostasis in MSCs, thus minimizing cellular senescence and preserving desired secretion activities. We propose that MASC is broadly useful to controlling senescence of a wide array of therapeutic cells during biomanufacturing.

Antimicrobial efficacy of self-locomotive manganese oxide nanozyme-doped diatom microbubbler on orthodontic brackets in vitro.

BACKGROUND: Orthodontic brackets provide a favorable environment for Streptococcus mutans biofilm formation, increasing the risk of white spots and dental caries. Manganese oxide (MnO2) nanozyme-doped diatom microbubbler (DM) is a recently developed material for biofilm removal. DM can generate oxygen by catalase-mimicking activity in Hydrogen peroxide (H2O2) solution and move with ejecting oxygen microbubbles to produce a mechanical self-cleansing effect. This study aimed to evaluate the feasibility of DM as a novel bracket cleaner. METHODS: DM was prepared according to the protocol and analyzed using a scanning electron microscope (SEM). We treated S. mutans biofilms grown over bracket with phosphate-buffered saline (PBS group), 0.12% chlorhexidine (CHX group), 3% H2O2 (H2O2 group), and co-treatment with 3 mg/mL of DM and 3% H2O2 (DM group). The biofilm removal effect was analyzed using crystal violet assay, and the results were observed using SEM. The viability of S. mutans in remaining biofilms was evaluated using confocal laser scanning microscopy (CLSM). Finally, we examined the effect of all materials on mature multispecies biofilms formed on debonded brackets. RESULTS: Crystal violet assay results revealed that the CHX group removed more biofilms than the control group, and the DM group removed biofilms more effectively than the CHX group (p < 0.0001). SEM and CLSM images showed that CHX killed S. mutans but failed to remove most biofilms on brackets. However, DM effectively removed biofilms and mature multispecies biofilms on debonded brackets (p < 0.0001). CONCLUSIONS: Co-treatment with DM and H2O2 is effective in removing biofilms on orthodontic brackets compared to conventional antibacterial agents.

Extending the Bioavailability of Hydrophilic Antioxidants for Metal Ion Detoxification via Crystallization with Polysaccharide Dopamine.

Although metal ions, such as silver and gold, have been shown to have strong antimicrobial properties, their potential to have toxic effects on human and environmental health has gained interest with an improved understanding of their mechanisms to promote oxidative stress. Redox control is a major focus of many drug delivery systems and often incorporates an antioxidant as the active pharmaceutical ingredient (API) to neutralize overproduced reactive oxygen species (ROS). Nevertheless, there are still limitations with bioavailability and extended redox control with regard to antioxidant drug delivery. Herein, this study develops a colloidal antioxidant crystal system that dissolves sustainably through polymer stabilization using sodium hyaluronate conjugated with dopamine (HA-dopa). We explore the role of dopamine incorporation into crystal-stabilizing polymers and quantify the balance between drug-polymer interactions and competing polymer-polymer interactions. We propose that this type of analysis is useful in the engineering of and provides insight into the release behavior of polymer-crystal complexes. In developing our crystal complex, N-acetylcysteine (NAC) was used as the model antioxidant to protect against silver ion toxicity. We found that our optimized HA-dopa-stabilized NAC crystals prolong the release time of NAC 5-fold compared to a polymer-free NAC crystal. Therefore, following sublethal exposure to AgNO3, the extended lifetime of NAC was able to maintain normal intracellular ROS levels, modulate metabolic function, mitigate fluctuations in ATP levels and ATP synthase activity, and preserve contraction frequency in engineered cardiac muscle tissue. Furthermore, the protective effects of the HA-dopa-stabilized NAC crystals were extended to a Daphnia magna model where silver-ion-induced change to both cell-level biochemistry and organ function was alleviated. As such, we propose that the packaging of hydrophilic antioxidants as colloidal crystals drastically extends the lifetime of the API, better maintains ROS homeostasis post metal ion exposure, and therefore preserves both intracellular biochemistry and tissue functionality.

Self-locomotive, antimicrobial microrobot (SLAM) swarm for enhanced biofilm elimination.

Biofilm is a major cause of infections and infrastructure deterioration, largely due to molecular diffusion restrictions that hamper the antimicrobial activity of traditional antibiotics and disinfectants. Here, we present a self-locomotive, antimicrobial microrobot (SLAM) swarm that can penetrate, fracture, and detach biofilm and, in turn, nullify bacterial resistance to antibiotics. The SLAM is assembled by loading a controlled mass of manganese oxide nanosheets on diatoms with the polydopamine binder. In hydrogen peroxide solution, SLAMs produce oxygen bubbles that generate thrust to penetrate the rigid and dense Pseudomonas aeruginosa biofilm and self-assemble into a swarm that repeatedly surrounds, expands, and bursts oxygen bubbles. The resulting cavities continue to deform and fracture extracellular polymeric substances from microgrooved silicone substrates and wounded skin explants while decreasing the number of viable bacterial cells. Additionally, SLAM allows irrigating water or antibiotics to access the residual biofilm better, thus enhancing the synergistic efficacy in killing up to 99.9% of bacterial cells.

Empowering engineered muscle in biohybrid pump by extending connexin 43 duration with reduced graphene oxides.

Engineered skeletal muscle act as therapeutics invaluable to treat injured or diseased muscle and a "living" material essential to assemble biological machinery. For normal development, skeletal myoblasts should express connexin 43, one of the gap junction proteins that promote myoblast fusion and myogenesis, during the early differentiation stage. However, myoblasts cultured in vitro often down-regulate connexin 43 before differentiation, limiting myogenesis and muscle contraction. This study demonstrates that tethering myoblasts with reduced graphene oxide (rGO) slows connexin 43 regression during early differentiation and increases myogenic mRNA synthesis. The whole RNA sequencing also confirms that the rGO on cells increases regulator genes for myogenesis, including troponin, while decreasing negative regulator genes. The resulting myotubes generated a three-fold larger contraction force than the rGO-free myotubes. Accordingly, a valveless biohybrid pump assembled with the rGO-tethered muscle increased the fluid velocity and flow rate considerably. The results of this study would provide an important foundation for developing physiologically relevant muscle and powering up biomachines that will be used for various bioscience studies and unexplored applications.

Manganese Oxide Nanozyme-Doped Diatom for Safe and Efficient Treatment of Peri-Implantitis.

Peri-implantitis is a major cause of dental implant failure. Bacterial biofilm contamination on the implant induces surrounding bone resorption and soft tissue inflammation, leading to severe deterioration of oral health. However, conventional biofilm removal procedures, such as mechanical decontamination and antiseptic application, are not effective enough to induce reosseointegration on decontaminated implant surfaces. This is due to (1) incomplete decontamination of the biofilm from inaccessible areas and (2) physicochemical alteration of implant surfaces caused by decontamination procedures. Herein, a safe and effective therapeutic approach for peri-implantitis is developed, which involves decontamination of implant-bound biofilms using the kinetic energy of microsized oxygen bubbles generated from the catalytic reaction between hydrogen peroxide (H2O2) and manganese oxide (MnO2) nanozyme sheet-doped silica diatom microparticles (Diatom Microbubbler, DM). Rapidly moving microsized DM particles are able to penetrate narrow spaces between implant screws, exerting just the right amount of force to entirely destroy biofilms without harming the surrounding mucosa or implant surfaces, as opposed to conventional antiseptics such as chlorhexidine or 3% H2O2 when used alone. Consequently, decontamination with DM facilitates successful reosseointegration on the peri-implantitis-affected implant surface. In summary, our new DM-based therapeutic approach will become a promising alternative to resolve clinically challenging aspects of peri-implantitis.

Extracellular Microenvironmental Control for Organoid Assembly.

Organoids, which are multicellular clusters with similar physiological functions to living organs, have gained increasing attention in bioengineering. As organoids become more advanced, methods to form complex structures continue to develop. There is evidence that the extracellular microenvironment can regulate organoid quality. The extracellular microenvironment consists of soluble bioactive molecules, extracellular matrix, and biofluid flow. However, few efforts have been made to discuss the microenvironment optimal to engineer specific organoids. Therefore, this review article examines the extent to which engineered extracellular microenvironments regulate organoid quality. First, we summarize the natural tissue and organ's unique chemical and mechanical properties, guiding researchers to design an extracellular microenvironment used for organoid engineering. Then, we summarize how the microenvironments contribute to the formation and growth of the brain, lung, intestine, liver, retinal, and kidney organoids. The approaches to forming and evaluating the resulting organoids are also discussed in detail. Impact statement Organoids, which are multicellular clusters with similar physiological function to living organs, have been gaining increasing attention in bioengineering. As organoids become more advanced, methods to form complex structures continue to develop. This review article focuses on recent efforts to engineer the extracellular microenvironment in organoid research. We summarized the natural organ's microenvironment, which informs researchers of key factors that can influence organoid formation. Then, we summarize how these microenvironmental controls significantly contribute to the formation and growth of the corresponding brain, lung, intestine, liver, retinal, and kidney organoids. The approaches to forming and evaluating the resulting organoids are discussed in detail, including extracellular matrix choice and properties, culture methods, and the evaluation of the morphology and functionality through imaging and biochemical analysis.

Transcriptomic and physiological analysis of endocrine disrupting chemicals Impacts on 3D Zebrafish liver cell culture system.

In recent decades, extensive efforts have focused on developing in vitro platforms mimicking fish livers to better understand the acute or chronic effects of toxicants on lower aquatic vertebrates. Fish liver cell lines have emerged as a promising culture system for these in vitro platforms because they complement the currently limited in vitro tools that mostly consist of mammalian cell lines and adhere to the 3Rs: replacement, reduction, and refinement of living animal tests. However, monolayer cell lines have lower transcriptional and physiological responses upon exposure to toxic chemicals than freshly isolated primary cells. To overcome this challenge, we utilized a three-dimensional (3D) spheroid-based in vitro platform, in which hepatocyte cells had self-organized into spheroid forms via E-cadherin bonds. This platform exhibited augmented transcriptomic and phenotypic regulation of liver cells in comparison to monolayer cells. We examined the organoid platform using the zebrafish liver (ZFL) cell line as a model system. ZFL cells spontaneously clustered into 3D spheroids with long-term viability by optimizing cell seeding density on a non-adherent substrate. Interestingly, 3D ZFL spheroids treated with estrogenic chemicals were activated to synthesize a higher level of vitellogenin (Vtg) than monolayer cells. Whole-transcriptome sequencing analysis confirmed that 3D ZFL spheroids had greater transcriptional regulation of genes related to reproductive toxicological response and liver functions, such as the urea cycle, estrogen receptors, and vitellogenin, compared to monolayer cells. These results may contribute to the engineering of novel 3D in vitro platforms for screening harmful chemicals and improving understanding of the underlying liver toxicity mechanisms at the molecular and cellular levels.

Adaptive biohybrid pumping machine with flow loop feedback.

Tissue-engineered living machines is an emerging discipline that employs complex interactions between living cells and engineered scaffolds to self-assemble biohybrid systems for diverse scientific research and technological applications. Here, we report an adaptive, autonomous biohybrid pumping machine with flow loop feedback powered by engineered living muscles. The tissue is made from skeletal muscle cells (C2C12) and collagen I/Matrigel matrix, which self-assembles into a ring that compresses a soft hydrogel tube connected at both ends to a rigid fluidic platform. The muscle ring contracts in a repetitive fashion autonomously squeezing the tube, resulting in an impedance pump. The resulting flow is circulated back to the muscle ring forming a feedback loop, which allows the pump to respond to the cues received from the flow it generates and adaptively manage its pumping performances based on the feedback. The developed biohybrid pumping system may have broad utility and impact in health, medicine and bioengineering.

Removal effect of Candida albicans biofilms from the PMMA resin surface by using a manganese oxide nanozyme-doped diatom microbubbler.

To prevent oral candidiasis, removal of the Candida biofilms from dentures is important. However, common denture cleaners are insufficiently effective in removing biofilms. A manganese oxide (MnO2) nanozyme-doped diatom microbubbler (DM) can generate oxygen gas microbubbles by a catalase-mimicking activity in hydrogen peroxide (H2O2). DM can invade and destroy biofilms with the driving force of continuously generated microbubbles. In this study, the Candida biofilm removal efficiency by co-treatment of DM and H2O2 was investigated. Diatom particles were reacted with (3-aminopropyl)triethoxysilane to prepare amine-substituted diatom particles. These particles were reacted with potassium permanganate to fabricate DMs. The morphology and components of DM were analyzed by using a scanning electron microscope (SEM). Four types of denture base resin specimens on which biofilms of Candida albicans were formed were treated with phosphate-buffered saline (PBS group), Polident 5-Minute (Polident group), 0.12% chlorhexidine gluconate (CHX group), 3% H2O2 (H2O2 group), and co-treatment of 3 mg/mL of DM and 3% H2O2 (DM group). The biofilm removal effect of each group was quantitatively analyzed by crystal violet assay, and the results were visually confirmed by SEM images. After each treatment, the remaining C. albicans were stained with Hoechst 33342/propidium iodide, and observed with confocal laser scanning microscopy (CLSM) to evaluate the viability. MnO2 nanozyme sheets were successfully doped on the surface of the fabricated DM. Although biofilms were not effectively removed in the Polident and CHX groups, CLSM images showed that CHX was able to effectively kill C. albicans in the biofilms on all resin specimen types. According to the crystal violet analysis, the H2O2 groups removed the biofilms on heat-activated and 3D-printed resins (P < .01), but could not remove the biofilms on autopolymerizing and milled resins significantly (P = .1161 and P = .1401, respectively). The DM groups significantly removed C. albicans from all resin specimen types (P < .01).