RESUMO
Introduction: Duchenne muscular dystrophy (DMD) is a genetic disorder that induces progressive muscular degeneration. Currently, the increase in DMD individuals' life expectancy is not being matched by an increase in quality of life. The functioning of the hand and wrist is central for performing daily activities and for providing a higher degree of independence. Active exoskeletons can assist this functioning but require the accurate decoding of the users' motor intention. These methods have, however, never been systematically analyzed in the context of DMD. Methods: This case study evaluated direct control (DC) and pattern recognition (PR), combined with an admittance model. This enabled customization of myoelectric controllers to one DMD individual and to a control population of ten healthy participants during a target-reaching task in 1- and 2- degrees of freedom (DOF). We quantified real-time myocontrol performance using target reaching times and compared the differences between the healthy individuals and the DMD individual. Results and Discussion: Our findings suggest that despite the muscle tissue degeneration, the myocontrol performance of the DMD individual was comparable to that of the healthy individuals in both DOFs and with both control approaches. It was also evident that PR control performed better for the 2-DOF tasks for both DMD and healthy participants, while DC performed better for the 1-DOF tasks. The insights gained from this study can lead to further developments for the intuitive multi-DOF myoelectric control of active hand exoskeletons for individuals with DMD.
RESUMO
BACKGROUND: Many wheelchair users experience disabilities in stabilising and positioning of the head. For these users, adequate head support is required. Although several types of head supports are available, further development of these systems is needed to improve functionality and quality of life, especially for the group of severely challenged users. For this group, user needs have not been clearly established. In this article, we provide an overview of the state-of-the-art in wheelchair mounted head supports and associated scientific evidence in order to identify requirements for the next generation of head support systems. MATERIALS AND METHODS: A scoping review was performed including scientific literature (PubMed/Scopus), patents (Espacenet/Google Scholar) and commercial information. Types of head support and important system characteristics for future head support systems were proposed from consultations with wheelchair users (n = 3), occupational therapists (n = 3) and an expert panel. RESULTS: Forty scientific papers, 90 patents and 80 descriptions of commercial devices were included in the scoping review. The identified head support systems were categorised per head support type. Only limited scientific clinical evidence with respect to the effectiveness of existing head support systems was found. From the user and expert consultations, a need was identified for personalised head support systems that intuitively combine changes in sitting and head position with continuous optimal support of the head to accommodate severely challenged users. CONCLUSIONS: This study presents the state-of-the-art in head support systems. Additionally, several important system characteristics are introduced that provide guidance for the development and improvement of head supports.Implications for rehabilitationEspecially for the group of severely challenged wheelchair users, current head support systems require further development to improve their users' quality of life.The desired system characteristics which are discussed in this review are an important step in the definition of requirements for the next generation of head supports.
Assuntos
Pessoas com Deficiência , Cadeiras de Rodas , Humanos , Qualidade de VidaRESUMO
In order to fabricate functional organoids and microtissues, a high cell density is generally required. As such, the placement of cell suspensions in molds or microwells to allow for cell concentration by sedimentation is the current standard for the production of organoids and microtissues. Even though molds offer some level of control over the shape of the resulting microtissue, this control is limited as microtissues tend to compact towards a sphere after sedimentation of the cells. 3D bioprinting on the other hand offers complete control over the shape of the resulting structure. Even though the printing of dense cell suspensions in the ink has been reported, extruding dense cellular suspensions is challenging and generally results in high shear stresses on the cells and a poor shape fidelity of the print. As such, additional materials such as hydrogels are added in the bioink to limit shear stresses, and to improve shape fidelity and resolution. The maximum cell concentration that can be incorporated in a hydrogel-based ink before the ink's rheological properties are compromised, is significantly lower than the concentration in a tissue equivalent. Additionally, the hydrogel components often interfere with cellular self-assembly processes. To circumvent these limitations, we report a simple and inexpensive xanthan bath based embedded printing method to 3D print dense functional linear tissues using dilute particle suspensions consisting of cells, spheroids, hydrogel beads, or combinations thereof. Using this method, we demonstrated the self-organization of functional cardiac tissue fibers with a layer of epicardial cells surrounding a body of cardiomyocytes.
Assuntos
Bioimpressão , Tinta , Suspensões , Banhos , Bioimpressão/métodos , Impressão Tridimensional , Hidrogéis/química , Engenharia Tecidual , Alicerces TeciduaisRESUMO
Duchenne muscular dystrophy (DMD) is a genetic disorder that results in progressive muscular degeneration. Although medical advances increased their life expectancy, DMD individuals are still highly dependent on caregivers. Hand/wrist function is central for providing independence, and robotic exoskeletons are good candidates for effectively compensating for deteriorating functionality. Robotic hand exoskeletons require the accurate decoding of motor intention typically via surface electromyography (sEMG). Traditional low-density sEMG was used in the past to explore the muscular activations of individuals with DMD; however, it cannot provide high spatial resolution. This study characterized, for the first time, the forearm high-density (HD) electromyograms of three individuals with DMD while performing seven hand/wrist-related tasks and compared them to eight healthy individuals (all data available online). We looked into the spatial distribution of HD-sEMG patterns by using principal component analysis (PCA) and also assessed the repeatability and the amplitude distributions of muscle activity. Additionally, we used a machine learning approach to assess DMD individuals' potentials for myocontrol. Our analysis showed that although participants with DMD were able to repeat similar HD-sEMG patterns across gestures (similarly to healthy participants), a fewer number of electrodes was activated during their gestures compared to the healthy participants. Additionally, participants with DMD activated their muscles close to maximal contraction level (0.63 ± 0.23), whereas healthy participants had lower normalized activations (0.26 ± 0.2). Lastly, participants with DMD showed on average fewer PCs (3), explaining 90% of the complete gesture space than the healthy (5). However, the ability of the DMD participants to produce repeatable HD-sEMG patterns was unexpectedly comparable to that of healthy participants, and the same holds true for their offline myocontrol performance, disproving our hypothesis and suggesting a clear potential for the myocontrol of wearable exoskeletons. Our findings present evidence for the first time on how DMD leads to progressive alterations in hand/wrist motor control in DMD individuals compared to healthy. The better understanding of these alterations can lead to further developments for the intuitive and robust myoelectric control of active hand exoskeletons for individuals with DMD.
RESUMO
Duchenne muscular Dystrophy (DMD) is a progressive degenerative muscle disease, affecting, among others, the upper extremities. Effective hand rehabilitation can improve the hand function of people with DMD. To reach this goal, we first need to gain more insight into the hand cognitive-motor performance of people with DMD. This is the first study employing a systematic analysis on multi-finger, cognitive-motor performance of people with DMD. For this purpose, we propose an active dynamic visuo-motor task. The task employed six visual stimuli, a subset of which was activated at each trial. The stimuli were activated with a frequency of 1, 2, 3 and 4 Hz. Eight healthy participants and three participants with DMD performed the task. Additionally, the healthy participants performed seven sessions, and we assessed the training effects. Task-related cognitive-motor performance was evaluated using information transfer rate (ITR) and perceived workload. Regarding ITR, healthy participants performed significantly better than DMD participants; however, this was more evident for trials involving more than three fingers. Workload showed no difference between the healthy and the DMD groups. Healthy participants significantly improved their performance during training. Our results suggest that hand rehabilitation of people with DMD should consider multi-finger dynamic training. However, additional research with more people with DMD is needed for further generalization of our conclusions.
Assuntos
Mãos/fisiopatologia , Distrofia Muscular de Duchenne/fisiopatologia , Desempenho Psicomotor , Adulto , Humanos , Masculino , Adulto JovemRESUMO
With recent improvements in healthcare, individuals with Duchenne muscular dystrophy (DMD) have prolonged life expectancy, and it is therefore vital to preserve their independence. Hand function plays a central role in maintaining independence in daily living. This requires sufficient grip force and the ability to modulate it with no substantially added effort. Individuals with DMD have low residual grip force and its modulation is challenging and fatiguing. To assist their hand function, we developed a novel dynamic hand orthosis called SymbiHand, where the user's hand motor intention is decoded by means of surface electromyography, enabling the control of an electrohydraulic pump for actuation. Mechanical work is transported using hydraulic transmission and flexible structures to redirect interaction forces, enhancing comfort by minimizing shear forces. This paper outlines SymbiHand's design and control, and a case study with an individual with DMD. Results show that SymbiHand increased the participant's maximum grasping force from 2.4 to 8 N. During a grasping force-tracking task, muscular activation was decreased by more than 40% without compromising task performance. These results suggest that SymbiHand has the potential to decrease muscular activation and increase grasping force for individuals with DMD, adding to the hand a total mass of no more than 241 g. Changes in mass distributions and an active thumb support are necessary for improved usability, in addition to larger-scale studies for generalizing its assistive potential.
Assuntos
Eletromiografia/métodos , Mãos , Distrofia Muscular de Duchenne/reabilitação , Próteses e Implantes , Atividades Cotidianas , Algoritmos , Força da Mão , Humanos , Intenção , Masculino , Músculo Esquelético/fisiopatologia , Distrofia Muscular de Duchenne/fisiopatologia , Aparelhos Ortopédicos , Satisfação do Paciente , Desenho de Prótese , Polegar , Adulto JovemRESUMO
Duchenne muscular dystrophy (DMD) is a muscular condition that leads to muscle loss. Orthotic devices may present a solution for people with DMD to perform activities of daily living (ADL). One such device is the active trunk support but it needs a control interface to identify the user's intention. Myoelectric control interfaces can be used to detect the user's intention and consequently control an active trunk support. Current research on the control of orthotic devices that use surface electromyography (sEMG) signals as control inputs, focuses mainly on muscles that are directly linked to the movement being performed (intuitive control). However in some cases, it is hard to detect a proper sEMG signal (e.g., when there is significant amount of fat), which can result in poor control performance. A way to overcome this problem might be the introduction of other, non-intuitive forms of control. This paper presents an explorative study on the comparison and learning behavior of two different control interfaces, one using sEMG of trunk muscles (intuitive) and one using sEMG of leg muscles that can be potentially used for an active trunk support (non-intuitive). Six healthy subjects undertook a 2-D Fitts's law style task. They were asked to steer a cursor into targets that were radially distributed symmetrically in five directions. The results show that the subjects were generally able to learn to control the tasks using either of the control interfaces and improve their performance over time. Comparison of both control interfaces demonstrated that the subjects were able to learn the leg control interface task faster than the trunk control interface task. Moreover, the performance on the diagonal-targets was significantly lower compared to the one directional-targets for both control interfaces. Overall, the results show that the subjects were able to control a non-intuitive control interface with high performance. Moreover, the results indicate that the non-intuitive control may be a viable solution for controlling an active trunk support.
Assuntos
Eletromiografia/métodos , Aparelhos Ortopédicos , Atividades Cotidianas , Humanos , Aprendizagem , Músculo Esquelético/fisiologia , Distrofia Muscular de Duchenne , TroncoRESUMO
BACKGROUND: Arm support devices are available to support people with Duchenne muscular dystrophy (DMD), but active trunk support devices are lacking. An active trunk support device can potentially extend the reach of the arm and stabilize the unstable trunk of people with DMD. In a previous study, we showed that healthy people were able to control an active trunk support using four different control interfaces (based on joystick, force on feet, force on sternum and surface electromyography). All four control interfaces had different advantages and disadvantages. The aim of this study was to explore which of the four inputs is detectably used by people with DMD to control an active trunk support. RESULTS: The results were subject-dependent in both experiments. In the active experiment, the joystick was the most promising control interface. Regarding the static experiment, surface electromyography and force on feet worked for two out of the three subjects. CONCLUSIONS: To our knowledge, this is the first time that people with DMD have engaged in a control task using signals other than those related to their arm muscles. According to our findings, the control interfaces have to be customised to every DMD subject.
RESUMO
The human hand is important for the performance of activities of daily living which are directly related to quality of life. Various conditions, such as Duchenne muscular dystrophy (DMD) can affect the function of the human hand and wrist. The ability to assess the impairment in the hand and the wrist by measuring the range of motion (ROM), is essential for the development of effective rehabilitation protocols. Currently the clinical standard is the goniometer. In this study we explore the feasibility and reliability of an optical sensor (Leap motion sensor) in measuring active hand/wrist ROM. We measured the hand/wrist ROM of 20 healthy adults with the goniometer and the Leap motion sensor, in order to check the agreement between the two methods and additionally, we performed a test-retest of the Leap motion sensor with 12 of them, to assess its reliability. The results suggest low agreement between the goniometer and the leap motion sensor, yet showing a large decrease in measurement time and high reliability when using the later. Despite the low agreement between the two methods, we believe that the Leap motion sensor shows potential to contribute to the development of hand rehabilitation protocols and be used with patients in a clinical setting.
Assuntos
Mãos/fisiologia , Amplitude de Movimento Articular , Punho/fisiologia , Adulto , Feminino , Humanos , Masculino , Reprodutibilidade dos Testes , Adulto JovemRESUMO
PURPOSE: When downsizing the femoral component to prevent mediolateral overhang, notching of the anterior femoral cortex may occur, which could be solved by flexing the femoral component. In this study, we investigated the effect of flexion of the femoral component on patellar tendon moment arm, patellofemoral forces and kinematics in posterior-referencing CR-TKA. Our hypothesis was that flexion of the femoral component increases the patellar tendon moment arm, reduces the patellofemoral forces and provides stable kinematics. METHODS: A validated musculoskeletal model of CR-TKA was used. The flexion of the femoral component was increased in four steps (0°, 3°, 6°, 9°) using posterior referencing, and different alignments were analysed in combination with three implant sizes (3, 4, 5). A chair-rising trial was analysed using the model, while simultaneously estimating quadriceps muscle force, patellofemoral contact force, tibiofemoral and patellofemoral kinematics. RESULTS: Compared to the reference case (size 4 and 0° flexion), for every 3° of increase in flexion of the femoral component the patellar tendon moment arm increased by 1% at knee extension. The peak quadriceps muscle force and patellofemoral contact force decreased by 2%, the patella shifted 0.8 mm more anteriorly and the remaining kinematics remained stable, with knee flexion. With the smaller size, the patellar tendon moment arm decreased by 6%, the quadriceps muscle force and patellofemoral contact force increased by 8 and 12%, and the patellar shifted 5 mm more posteriorly. Opposite trends were found with the bigger size. CONCLUSION: Flexing the femoral component with posterior referencing reduced the patellofemoral contact forces during a simulated chair-rising trial with a patient-specific musculoskeletal model of CR-TKA. There seems to be little risk when flexing and downsizing the femoral component, compared to when using a bigger size and neutral alignment. These findings provide relevant information to surgeons who wish to prevent anterior notching when downsizing the femoral component.
Assuntos
Artroplastia do Joelho/métodos , Simulação por Computador , Prótese do Joelho , Articulação Patelofemoral/fisiologia , Desenho de Prótese , Fenômenos Biomecânicos , Humanos , Ligamentos Articulares/fisiologia , Ligamento Patelar/fisiologia , Músculo Quadríceps/fisiologia , Amplitude de Movimento Articular/fisiologiaRESUMO
PURPOSE: In total knee arthroplasty (TKA), the posterior tibial slope is not always reconstructed correctly, and the knee ligaments may become too tight in flexion. To release a tight flexion gap, surgeons can increase the posterior tibial slope using two surgical resection techniques: the anterior tibial cortex (ACR) or the centre of tibial plateau (CPR) referencing. It is not known how this choice affects the knee laxity and function during activities of daily living. The aim of this study was to investigate the effect of tibial slope on knee laxity, kinematics and forces during a squatting activity using computer simulation techniques. We hypothesised that the effects depend on the referencing technique utilised. METHODS: A validated musculoskeletal model of TKA was used. Knee laxity tests were simulated in flexion and extension. Then, a squat motion was simulated to calculate: movement of the tibiofemoral joint (TFJ) contact points and patello-femoral joint (PFJ) contact force. All analyses were repeated with more anterior (-3°), neutral (0°), and more posterior tibial slope (+3°, +6°, +9°), and with two referencing techniques (ACR, CPR). RESULTS: Knee laxities increased dramatically with more posterior slope with the ACR technique (up to 400%), both in flexion and in extension. The CPR technique, instead, had much smaller effects (up to 42% variations). During squatting, more slope with the ACR technique resulted in larger movements of the TFJ contact point. The PFJ contact force decreased considerably with more slope with the CPR technique (12% body weight reduction every 3° more posterior slope), thanks to the preservation of the patellar height and quadriceps-femur load sharing. CONCLUSION: ACR technique alters considerably the knee laxity, both in flexion and extensions, and surgeons should be cautious about its use. More slope with CPR technique induces more favourable TFJ kinematics and loading of the knee extensor apparatus and does not substantially alter knee laxity. Preferably, the tibial slope resection should be pre-planned thoroughly and performed using CPR technique as accurately as possible. Surgeons can directly translate the results of this study into the clinical practice.
Assuntos
Artroplastia do Joelho , Simulação por Computador , Articulação do Joelho/fisiologia , Tíbia/anatomia & histologia , Atividades Cotidianas , Idoso , Fenômenos Biomecânicos , Fêmur/cirurgia , Humanos , Articulação do Joelho/cirurgia , Ligamentos Articulares/cirurgia , Patela/cirurgia , Articulação Patelofemoral/cirurgia , Músculo Quadríceps/fisiologia , Amplitude de Movimento Articular , Tíbia/cirurgiaRESUMO
BACKGROUND: Robotic arm supports aim at improving the quality of life for adults with Duchenne muscular dystrophy (DMD) by augmenting their residual functional abilities. A critical component of robotic arm supports is the control interface, as is it responsible for the human-machine interaction. Our previous studies showed the feasibility of using surface electromyography (sEMG) as a control interface to operate robotic arm supports in adults with DMD (22-24 years-old). However, in the biomedical engineering community there is an often raised skepticism on whether adults with DMD at the last stage of their disease have sEMG signals that can be measured and used for control. FINDINGS: In this study sEMG signals from Biceps and Triceps Brachii muscles were measured for the first time in a 37 year-old man with DMD (Brooke 6) that lost his arm function 15 years ago. The sEMG signals were measured during maximal and sub-maximal voluntary isometric contractions and evaluated in terms of signal-to-noise ratio and co-activation ratio. Beyond the profound deterioration of the muscles, we found that sEMG signals from both Biceps and Triceps muscles were measurable in this individual, although with a maximum signal amplitude 100 times lower compared to sEMG from healthy subjects. The participant was able to voluntarily modulate the required level of muscle activation during the sub-maximal voluntary isometric contractions. Despite the low sEMG amplitude and a considerable level of muscle co-activation, simulations of an elbow orthosis using the measured sEMG as driving signal indicated that the sEMG signals of the participant had the potential to provide control of elbow movements. CONCLUSIONS: To the best of our knowledge this is the first time that sEMG signals from a man with DMD at the last-stage of the disease were measured, analyzed and reported. These findings offer promising perspectives to the use of sEMG as an intuitive and natural control interface for robotic arm supports in adults with DMD until the last stage of the disease.
Assuntos
Eletromiografia , Distrofia Muscular de Duchenne/fisiopatologia , Cotovelo/fisiologia , Humanos , Contração Isométrica , Masculino , Movimento , Músculo Esquelético/fisiopatologia , Aparelhos Ortopédicos , Qualidade de Vida , Robótica , Processamento de Sinais Assistido por Computador , Razão Sinal-Ruído , Adulto JovemRESUMO
Duchenne muscular Dystrophy (DMD) Is a progressive muscle degenerative disease. Active hand assistive devices, can improve the quality of life of people with DMD. Such devices show a rejection rate due to complexity. Our hypothesis is, that a simple orthosis might prove more functional and realistic in assisting people with DMD. To investigate, we developed a portable setup that provides various visual stimuli and records the response of the subjects' fingers through a mouse clicking task. Six LEDs served as visual stimuli. The subjects' responses were obtained through mechanical interaction with two vertical mice. Different combinations of frequencies and numbers of stimuli were tested with 8 healthy subjects and one with DMD. Performance was evaluated in terms of information transfer rate (ITR), pattern accuracy and perceived workload. The outcome shows that lower complexity results in lower ITR and lower workload for all subjects. While for healthy subjects, maximum ITR was 4.3 bits/s, for DMD maximum ITR was 2.5 bits/s. Both maxima were achieved at the same trial (3 fingers at 2 Hz). This trial agrees with a pareto optimization analysis of ITR with respect to workload. The results support our hypothesis for a simple yet functional solution. Furthermore healthy subjects and the individual with DMD, in principal show similar finger control, albeit with lower absolute performance.
Assuntos
Periféricos de Computador , Mãos/fisiopatologia , Distrofia Muscular de Duchenne/reabilitação , Tecnologia Assistiva , Adulto , Feminino , Mãos/fisiologia , Humanos , Masculino , Análise e Desempenho de Tarefas , Adulto JovemRESUMO
BACKGROUND: Adults with Duchenne muscular dystrophy (DMD) can benefit from devices that actively support their arm function. A critical component of such devices is the control interface as it is responsible for the human-machine interaction. Our previous work indicated that surface electromyography (sEMG) and force-based control with active gravity and joint-stiffness compensation were feasible solutions for the support of elbow movements (one degree of freedom). In this paper, we extend the evaluation of sEMG- and force-based control interfaces to simultaneous and proportional control of planar arm movements (two degrees of freedom). METHODS: Three men with DMD (18-23 years-old) with different levels of arm function (i.e. Brooke scores of 4, 5 and 6) performed a series of line-tracing tasks over a tabletop surface using an experimental active arm support. The arm movements were controlled using three control methods: sEMG-based control, force-based control with stiffness compensation (FSC), and force-based control with no compensation (FNC). The movement performance was evaluated in terms of percentage of task completion, tracing error, smoothness and speed. RESULTS: For subject S1 (Brooke 4) FNC was the preferred method and performed better than FSC and sEMG. FNC was not usable for subject S2 (Brooke 5) and S3 (Brooke 6). Subject S2 presented significantly lower movement speed with sEMG than with FSC, yet he preferred sEMG since FSC was perceived to be too fatiguing. Subject S3 could not successfully use neither of the two force-based control methods, while with sEMG he could reach almost his entire workspace. CONCLUSIONS: Movement performance and subjective preference of the three control methods differed with the level of arm function of the participants. Our results indicate that all three control methods have to be considered in real applications, as they present complementary advantages and disadvantages. The fact that the two weaker subjects (S2 and S3) experienced the force-based control interfaces as fatiguing suggests that sEMG-based control interfaces could be a better solution for adults with DMD. Yet force-based control interfaces can be a better alternative for those cases in which voluntary forces are higher than the stiffness forces of the arms.
Assuntos
Braço , Eletromiografia/métodos , Movimento , Distrofia Muscular de Duchenne/reabilitação , Tecnologia Assistiva , Adolescente , Algoritmos , Estudos de Viabilidade , Feminino , Humanos , Masculino , Modelos Teóricos , Preferência do Paciente , Desenho de Prótese , Desempenho Psicomotor , Robótica , Processamento de Sinais Assistido por Computador , Adulto JovemRESUMO
Knowing the forces in the human body is of great clinical interest and musculoskeletal (MS) models are the most commonly used tool to estimate them in vivo. Unfortunately, the process of computing muscle, joint contact, and ligament forces simultaneously is computationally highly demanding. The goal of this study was to develop a fast surrogate model of the tibiofemoral (TF) contact in a total knee replacement (TKR) model and apply it to force-dependent kinematic (FDK) simulations of activities of daily living (ADLs). Multiple domains were populated with sample points from the reference TKR contact model, based on reference simulations and design-of-experiments. Artificial neural networks (ANN) learned the relationship between TF pose and loads from the medial and lateral sides of the TKR implant. Normal and right-turn gait, rising-from-a-chair, and a squat were simulated using both surrogate and reference contact models. Compared to the reference contact model, the surrogate contact model predicted TF forces with a root-mean-square error (RMSE) lower than 10 N and TF moments lower than 0.3 N·m over all simulated activities. Secondary knee kinematics were predicted with RMSE lower than 0.2 mm and 0.2 deg. Simulations that used the surrogate contact model ran on average three times faster than those using the reference model, allowing the simulation of a full gait cycle in 4.5 min. This modeling approach proved fast and accurate enough to perform extensive parametric analyses, such as simulating subject-specific variations and surgical-related factors in TKR.
Assuntos
Artroplastia do Joelho , Fenômenos Mecânicos , Modelos Biológicos , Atividades Cotidianas , Fenômenos Biomecânicos , HumanosRESUMO
Pressure ulcers are a significant problem in health care, due to high costs and large impact on patients' life. In general, pressure ulcers develop as tissue viability decreases due to prolonged mechanical loading. The relation between load and tissue viability is highly influenced by individual characteristics. It is proposed that measurements of skin blood flow regulation could provide good assessment of the risk for pressure ulcer development, as skin blood flow is essential for tissue viability. . Therefore, the aim of this systematic review is to gain insight in the relation between mechanical load and the response of the skin and underlying tissue to this loading measured in-vivo with non-invasive techniques. A systematic literature search was performed to identify articles analysing the relation between mechanical load (pressure and/or shear) and tissue viability measured in-vivo. Two independent reviewers scored the methodological quality of the 22 included studies. Methodological information as well as tissue viability parameters during load application and after load removal were extracted from the included articles and used in a meta-analysis. Pressure results in a decrease in skin blood flow parameters, compared to baseline; showing a larger decrease with higher magnitudes of load. The steepness of the decrease is mostly dependent on the anatomical location. After load removal the magnitude of the post-reactive hyperaemic peak is related to the magnitude of pressure. Lastly, shear in addition to pressure, shows an additional negative effect, but the effect is less apparent than pressure on skin viability.
Assuntos
Pressão/efeitos adversos , Pele/lesões , Sobrevivência de Tecidos/fisiologia , Humanos , Úlcera por Pressão/fisiopatologia , Pele/irrigação sanguínea , Pele/fisiopatologiaRESUMO
BACKGROUND: A variety of techniques for measuring lower limb loading exists, each with their own limitations. A new ambulatory biofeedback system was developed to overcome these limitations. In this study, we described the technical aspects and validated the accuracy of this system. METHODS: A bench press was used to validate the system in the static situation. Ten healthy volunteers were measured by the new biofeedback system and a dual-belt instrumented treadmill to validate the system in the dynamic situation. RESULTS: Bench press results showed that the sensor accurately measured peak loads up to 1000 N in the static situation. In the healthy volunteers, the load curves measured by the biofeedback system were similar to the treadmill. However, the peak loads and loading rates were lower in the biofeedback system in all participants at all speeds. CONCLUSIONS: Advanced sensor technologies used in the new biofeedback system resulted in highly accurate measurements in the static situation. The position of the sensor and the design of the biofeedback system should be optimized to improve results in the dynamic situation.
Assuntos
Biorretroalimentação Psicológica , Teste de Esforço , Terapia por Exercício , Humanos , Extremidade Inferior , Suporte de CargaRESUMO
While there is an extensive number of studies on the development and evaluation of electromyography (EMG)- and force-based control interfaces for assistive devices, no studies have focused on testing these control strategies for the specific case of adults with Duchenne muscular dystrophy (DMD). This paper presents a feasibility study on the use of EMG and force as control interfaces for the operation of active arm supports for men with DMD. We have built an experimental active elbow support, with a threefold objective: 1) to investigate whether adult men with DMD could use EMG- and force-based control interfaces; 2) to evaluate their performance during a discrete position-tracking task; and 3) to examine users' acceptance of the control methods. The system was tested in three adults with DMD (21-22 years). Although none of the three participants had performed any voluntary movements with their arms for the past 3-5 years, all of them were 100% successful in performing the series of tracking tasks using both control interfaces (mean task completion time EMG: [Formula: see text] , force: [Formula: see text] ). While movements with the force-based control were considerably smoother in Subject 3 and faster in Subject 1, EMG based-control was perceived as less fatiguing by all three subjects. Both EMG- and force-based interfaces are feasible solutions for the control of active elbow supports in adults with DMD and should be considered for further investigations on multi-DOF control.
Assuntos
Articulação do Cotovelo/fisiopatologia , Eletromiografia/métodos , Exoesqueleto Energizado , Distrofia Muscular de Duchenne/fisiopatologia , Distrofia Muscular de Duchenne/reabilitação , Robótica/instrumentação , Biorretroalimentação Psicológica/instrumentação , Biorretroalimentação Psicológica/métodos , Desenho de Equipamento , Análise de Falha de Equipamento , Estudos de Viabilidade , Humanos , Masculino , Sistemas Homem-Máquina , Distrofia Muscular de Duchenne/diagnóstico , Robótica/métodos , Estresse Mecânico , Resultado do Tratamento , Adulto JovemRESUMO
Unfortunately, the original version of this article [1] contained an error. Equation 6 was included incorrectly: in the original equation variable slinks3 was missing.The correct Equation 6 can be found below:
RESUMO
BACKGROUND: Persons suffering from progressive muscular weakness, like those with Duchenne muscular dystrophy (DMD), gradually lose the ability to stand, walk and to use their arms. This hinders them from performing daily activities, social participation and being independent. Wheelchairs are used to overcome the loss of walking. However, there are currently few efficient functional substitutes to support the arms. Arm supports or robotic arms can be mounted to wheelchairs to aid in arm motion, but they are quite visible (stigmatizing), and limited in their possibilities due to their fixation to the wheelchair. The users prefer inconspicuous arm supports that are comfortable to wear and easy to control. METHODS: In this paper the design, characterization, and pilot validation of a passive arm support prototype, which is worn on the body, is presented. The A-gear runs along the body from the contact surface between seat and upper legs via torso and upper arm to the forearm. Freedom of motion is accomplished by mechanical joints, which are nearly aligned with the human joints. The system compensates for the arm weight, using elastic bands for static balance, in every position of the arm. As opposed to existing devices, the proposed kinematic structure allows trunk motion and requires fewer links and less joint space without compromising balancing precision. The functional prototype has been validated in three DMD patients, using 3D motion analysis. RESULTS: Measurements have shown increased arm performance when the subjects were wearing the prototype. Upward and forward movements were easier to perform. The arm support is easy to put on and remove. Moreover, the device felt comfortable for the subjects. However, downward movements were more difficult, and the patients would prefer the device to be even more inconspicuous. CONCLUSION: The A-gear prototype is a step towards inconspicuousness and therefore well-received dynamic arm supports for people with muscular weakness.