Nanospray-assisted deposition of silver nanoparticles for mapping of a peptide in nanofibrous layers via surface-enhanced Raman spectrometry.

Surface-enhanced Raman spectrometry (SERS) is a universal detection tool identifying molecules via vibrations of their chemical bonds. Its function requires the close localization of metal nanostructures and the analyte. In this work, we present a lab-made instrumentation for the deposition of silver nanoparticles on a strongly hydrophilic nanofibrous composite via a nanospray for SERS mapping of an incorporated peptide. The nanospray-sample distance was revealed as the most crucial parameter since it directly influences the moisture of the deposited colloid. Residual water was recognized as a sensitivity enhancer. Additionally, we continuously introduced a solution of sodium chloride to the colloid increasing its ionic strength, which formed a more homogeneous profile of the deposit. After the deposition process, the treated sample was scanned via a SERS laser and the collected Raman spectra were transformed into a distribution map of the peptide at a concentration of 5 µg/g.

Effects of emulsion, dispersion, and blend electrospinning on hyaluronic acid nanofibers with incorporated antiseptics.

Nanofibrous materials are used in drug delivery as carriers of active ingredients. These can be incorporated into the materials with various electrospinning methods that differ mainly in the way spinning solutions are prepared. Each method affects primarily the encapsulation efficiency and distribution of active ingredients in the materials. This study focuses on the incorporation of octenidine dihydrochloride (OCT) and triclosan (TRI) into nanofibrous materials electrospun from native hyaluronic acid emulsions, dispersions, and blends. OCT had no substantial effect on fiber morphology, which is affected by the solvent system. All OCT encapsulation efficiencies were comparable (approximately 90%). TRI encapsulation efficiencies varied greatly depending on the method used. Merely 3% of TRI was encapsulated when it was spun from a dispersion. Encapsulation efficiency was higher, and TRI was incorporated in clusters when an emulsion was used. The best result was achieved with a blend, in which case 96% of TRI was encapsulated.

Nanofibrous material from hyaluronan derivatives preserving fibrous structure in aqueous environment.

Nanofibrous materials produced from natural polymers have wide range of potential uses in regenerative medicine. This paper focuses on preparation of nanofibrous layers produced from intentionally hydrophobized derivatives of hyaluronan, which is known for its ability to promote wound healing. This structural modification of hyaluronan expands the range of potential uses of this promising material, which is otherwise limited due to the hydrophilic nature of hyaluronic acid. The aim of this research was preparation of nanofibrous material that would retain its fibrous structure and dimensional stability even after getting into contact with an aqueous medium, which is impossible to achieve with layers composed solely of native hyaluronan. As a result, such material would be able to retain its breathability and good mechanical properties when both dry and wet. Furthermore, all prepared materials were proved non-toxic for cells. This self-supporting nanofibrous matrix can be used as a scaffold, or porous wound dressing.

The Effects of Electric Field Dynamics on the Quality of Large-Area Nanofibrous Layers.

This paper presents technological modifications of an electrostatic spinning device, which significantly increase the thickness homogeneity (i.e., quality) of produced layers by creating auxiliary dynamic electric fields in the vicinity of the spinning and collector electrodes. A moving body was installed above the needleless spinning electrode, which destabilized the standing wave occurring on the free surface of the spinning solution. Furthermore, an endless belt design was used for the collector electrode instead of a roll-to-roll design, which made it possible to substantially increase the surface speed of the substrate and, therefore, the dynamics of the electric field at the place of collection of the fibers being spun. As a result, the coefficient of variation of the area weight of 912 samples cut out from the deposited nanofibrous layer, which was (1000 × 500) mm2 in size and had an average area weight of (17.2 ± 0.8) g/m2, was less than 4.5%. These results were obtained only when the dynamics of both the spinning and collector electrodes were increased at the same time. These modifications resulted in a significant increase in the quality of deposited nanofibrous layers up to the standard required for their use in pharmaceutical applications.

Antimicrobial nanofibrous mats with controllable drug release produced from hydrophobized hyaluronan.

Due to their large active surface, high loading efficiency, and tunable dissolution profiles, nanofibrous mats are often cited as promising drug carriers or antimicrobial membranes. Hyaluronic acid has outstanding biocompatibility, but it is hydrophilic. Nanofibrous structures made from hyaluronan dissolve immediately, making them unsuitable for controlled drug release and longer applications. We aimed to prepare a hyaluronan-based antimicrobial nanofibrous material, which would retain its integrity in aqueous environments. Self-supporting nanofibrous mats containing octenidine dihydrochloride or triclosan were produced by electrospinning from hydrophobized hyaluronan modified with a symmetric lauric acid anhydride. The nanofibrous mats required no cross-linking to be stable in PBS for 7 days. The encapsulation efficiency of antiseptics was nearly 100%. Minimal release of octenidine was observed, while up to 30% of triclosan was gradually released in 72 h. The nanofibrous materials exhibited antimicrobial activity, the fibroblast viability was directly dependent on the antiseptic content and its release.

Electrospray: More than just an ionization source.

Electrospraying (ES) is a potential-driven process of liquid atomization, which is employed in the field of analytical chemistry, particularly as an ionization technique for mass spectrometric analyses of biomolecules. In this review, we demonstrate the extraordinary versatility of the electrospray by overviewing the specifics and advanced applications of ES-based processing of low molecular mass compounds, biomolecules, polymers, nanoparticles, and cells. Thus, under suitable experimental conditions, ES can be used as a powerful tool for highly controlled deposition of homogeneous films or various patterns, which may sometimes even be organized into 3D structures. We also emphasize its capacity to produce composite materials including encapsulation systems and polymeric fibers. Further, we present several other, less common ES-based applications. This review provides an insight into the remarkable potential of ES, which can be very useful in the designing of innovative and unique strategies.

Surface Treatment of Acetabular Cups with a Direct Deposition of a Composite Nanostructured Layer Using a High Electrostatic Field.

A composite nanofibrous layer containing collagen and hydroxyapatite was deposited on selected surface areas of titanium acetabular cups. The layer was deposited on the irregular surface of these 3D objects using a specially developed electrospinning system designed to ensure the stability of the spinning process and to produce a layer approximately 100 micrometers thick with an adequate thickness uniformity. It was verified that the layer had the intended nanostructured morphology throughout its entire thickness and that the prepared layer sufficiently adhered to the smooth surface of the model titanium implants even after all the post-deposition sterilization and stabilization treatments were performed. The resulting layers had an average thickness of (110 ± 30) micrometers and an average fiber diameter of (170 ± 49) nanometers. They were produced using a relatively simple and cost-effective technology and yet they were verifiably biocompatible and structurally stable. Collagen- and hydroxyapatite-based composite nanostructured surface modifications represent promising surface treatment options for metal implants.

Electrospinning of Fibrous Layers Containing an Antibacterial Chlorhexidine/Kaolinite Composite.

The aim of this study was to prepare self-supporting homogeneous nano/microfibrous layers with a content of the clay mineral kaolinite and kaolinite modified with the antibacterial agent chlorhexidine (CH). Fibers were made of hydrophobic polymers-polyurethane and polycaprolactone. Polymer suspensions for electrospinning contained 2, 5, and 8 wt % (relative to the total weight of the suspension) of kaolinite or CH/kaolinite and were electrospun using 4SPIN LAB. The morphology of prepared fibrous layers was characterized using scanning electron microscopy; energy-dispersive X-ray spectroscopy mapping and Raman spectroscopy were used to confirm the presence and distribution of kaolinite in the layers. Fiber diameters decreased after adding kaolinite or CH/kaolinite and ranged from 600 nm to 5 µm. Antibacterial CH was found in kaolinite itself as well as separately in the fibers (result of imperfect bonding of CH onto the surface of kaolinite). The encapsulation efficiency of all samples exceeded 64%, and the highest efficiency was observed in samples with 2 wt % CH/kaolinite. Samples containing CH exhibited good antibacterial activity against Staphylococcus aureus, and the effectiveness of which was affected by the concentration of the antibacterial agent. The release of CH was very slow, and there was no initial burst release. Overall, no more than 5% of the CH was released over a course of 168 h. The Korsmeyer-Peppas model revealed that CH is released by a diffusion mechanism.

Non-invasive diagnostic system and its opto-mechanical probe for combining confocal Raman spectroscopy and optical coherence tomography.

Non-invasive optical diagnostic methods allow important information about studied systems to be obtained in a non-destructive way. Complete diagnosis requires information about the chemical composition as well as the morphological structure of a sample. We report on the development of an opto-mechanical probe that combines Raman spectroscopy (RS) and optical coherence tomography (OCT), two methods that provide all the crucial information needed for a non-invasive diagnosis. The aim of this paper is to introduce the technical design, construction and optimization of a dual opto-mechanical probe combining two in-house developed devices for confocal RS and OCT. The unique benefit of the probe is a gradual acquisition of OCT and RS data, which allows to use the acquired OCT images to pinpoint locations of interest for RS measurements. The parameters and the correct functioning of the probe were verified by RS scanning of various samples (silicon wafer and ex vivo tissue) based on their OCT images - lateral as well as depth scanning was performed. Both the OCT and RS systems were developed, optimized and tested with the ultimate aim of verifying the functionality of the probe. Picture: Schematic illustration and visualization of the developed RS-OCT probe.