Antimicrobial Coatings Based on a Photoreactive (Meth)acrylate Syrup and Ferulic Acid-The Effectiveness against Staphylococcus epidermidis.

A novel photopolymerizable (meth)acrylate oligomer syrup modified with ferulic acid (FA) was verified as an antimicrobial coating binder against a biofilm of Staphylococcus epidermidis. A solution-free UV-LED-initiated photopolymerization process of aliphatic (meth)acrylates and styrene was performed to prepare the oligomer syrup. The influence of ferulic acid on the UV crosslinking process of the varnish coatings (kinetic studies using photo-DSC) as well as their chemical structure (FTIR) and mechanical (adhesion, hardness), optical (gloss, DOI parameter), and antibacterial properties against S. epidermidis were investigated. The photo-DSC results revealed that FA has a positive effect on reducing the early occurrence of slowing processes and has a favorable effect on the monomer conversion increment. It turned out, unexpectedly, that the more FA in the coating, the greater its adhesion to a glass substrate and hardness. The coating containing 0.9 wt. part of FA exhibited excellent antimicrobial properties against S. epidermidis, i.e., the bacterial number after 24 h was only 1.98 log CFU/mL. All the coatings showed relatively high hardness, gloss (>80 G.U.), and DOI parameter values (30-50 a.u.).

Thermally Stable UV-Curable Pressure-Sensitive Adhesives Based on Silicon-Acrylate Telomers and Selected Adhesion Promoters.

A new type of UV-curable pressure-sensitive adhesive containing Si atoms (Si-PSAs) was prepared by a solution-free UV-initiated telomerization process of n-butyl acrylate, acrylic acid, methyl methacrylate, and 4-acrylooxybenzophenone using triethylsilane (TES) as a telogen and an acylphosphine oxide (APO) as a radical photoinitiator. Selected commercial adhesion promoters were tested as additives in the formulation of adhesive compositions, i.e., (i) an organic copolymer with polar groups (carboxyl and hydroxyl); (ii) a hydroxymetal-organic compound; and (iii) a quaternary ammonium salt and (iv) a chlorinated polyolefin. No fillers, crosslinking agents, or photoinitiators were used in the adhesive compositions. NMR techniques confirmed the incorporation of silicon atoms into the polyacrylate structure. The influence of adhesion promoters on the kinetics of the UV-crosslinking process of Si-PSAs was investigated by a photo-DSC technique. The obtained Si-PSAs were characterized by adhesion (to steel, glass, PMMA, and PE), tack, and cohesion at 20 °C. Finally, the wetting angle of Si-PSAs with water was checked and their thermal stability was proved (TGA). Unexpectedly, the quaternary ammonium salt had the most favorable effect on improving the thermal stability of Si-PSAs (302 °C) and adhesion to glass and PMMA. In contrast, Si-PSAs containing the hydroxymetal-organic compound showed excellent adhesion to steel.

Investigation of 2,4-Dihydroxylaryl-Substituted Heterocycles as Inhibitors of the Growth and Development of Biotrophic Fungal Pathogens Associated with the Most Common Cereal Diseases.

Climate change forces agriculture to face the rapidly growing virulence of biotrophic fungal pathogens, which in turn drives researchers to seek new ways of combatting or limiting the spread of diseases caused by the same. While the use of agrochemicals may be the most efficient strategy in this context, it is important to ensure that such chemicals are safe for the natural environment. Heterocyclic compounds have enormous biological potential. A series of heterocyclic scaffolds (1,3,4-thiadiazole, 1,3-thiazole, 1,2,4-triazole, benzothiazine, benzothiadiazine, and quinazoline) containing 2,4-dihydroxylaryl substituents were investigated for their ability to inhibit the growth and development of biotrophic fungal pathogens associated with several important cereal diseases. Of the 33 analysed compounds, 3 were identified as having high inhibitory potential against Blumeria and Puccinia fungi. The conducted research indicated that the analysed compounds can be used to reduce the incidence of fungal diseases in cereals; however, further thorough research is required to investigate their effects on plant-pathogen systems, including molecular studies to determine the exact mechanism of their activity.

Hexakis[p-(hydroxymethyl)phenoxy]cyclotriphosphazene as an Environmentally Friendly Modifier for Polyurethane Powder Coatings with Increased Thermal Stability and Corrosion Resistance.

Protection against fire and the corrosion of metals is necessary to ensure human safety. Most of the fire and corrosion inhibitors do not meet the ecological requirements. Therefore, effective and ecological methods of protecting metals are currently a challenge for researchers. In this work, the influence of hexakis(4-(hydroxymethyl)phenoxy)cyclotriphosphazene (HHPCP) on the characteristics of powder coatings was examined. The coatings' properties were investigated by measuring the roughness, hardness, adhesion to the steel surface, cupping, gloss, scratch resistance, and water contact angle. The thermal stability was studied by furnace test and TGA analysis. The corrosion resistance test was carried out in a 3.5% NaCl solution. The distribution of phosphazene-derived segments in the coating was examined by GD-EOS analysis. Modified coatings show better corrosion and thermal resistance and can be used for the protection of the steel surface. Their better corrosion resistance is due to the electroactive properties of the phosphazene ring and its higher concentration at the coating surface, confirmed by GD-EOS analysis. The increase in thermal resistance is due to the effect of the formation of phosphoric metaphosphoric and polyphosphoric acids during the decomposition of HHCPC, which remain in the condensed char phase and play a crucial role in surface protection.

Transcriptional response of Cu-deficient barley (Hordeum vulgare L.) to foliar-applied nano-Cu: Molecular crosstalk between Cu loading into plants and changes in Cu homeostasis genes.

For safe and effective nutrient management, the cutting-edge approaches to plant fertilization are continuously developed. The aim of the study was to analyze the transcriptional response of barley suffering from Cu deficiency to foliar application of nanoparticulate Cu (nano-Cu) and its ionic form (CuSO4) at 100 and 1000 mg L-1 for the examination of their supplementing effect. The initial interactions of Cu-compounds with barley leaves were analyzed with spectroscopic (ICP-OES) and microscopic (SEM-EDS) methods. To determine Cu cellular status, the impact of Cu-compounds on the expression of genes involved in regulating Cu homeostasis (PAA1, PAA2, RAN1, COPT5), aquaporins (NIP2.1, PIP1.1, TIP1.1, TIP1.2) and antioxidant defense response (SOD CuZn, SOD Fe, SOD Mn, CAT) after 1 and 7 days of exposure was analyzed. Although Cu accumulation in plant leaves was detected overtime, the Cu content in leaves exposed to nano-Cu for 7 days was 44.5% lower than in CuSO4 at 100 mg L-1. However, nano-Cu aggregates remaining on the leaf surface indicated a potential difference between measured Cu content and the real Cu pool present in the plant. Our study revealed significant changes in the pattern of gene expression overtime depending on Cu-compound type and dose. Despite the initial puzzling patterns of gene expression, after 7 days all Cu transporters showed significant down-regulation under Cu-compounds exposure to prevent Cu excess in plant cells. Conversely, aquaporin gene expression was induced after 7 days, especially by nano-Cu and CuSO4 at 100 mg L-1 due to the stimulatory effect of low Cu doses. Our study revealed that the gradual release of Cu ions from nano-Cu at a lower rate provided a milder molecular response than CuSO4. It might indicate that nano-Cu maintained better metal balance in plants than the conventional compounds, thus may be considered as a long-term supplier of Cu.

Corrigendum: Glutathione and copper ions as critical factors of green plant regeneration efficiency of triticale in vitro anther culture.

[This corrects the article DOI: 10.3389/fpls.2022.926305.].

New Pressure-Sensitive Acrylic Adhesives for Low Energy Substrates Prepared via UV-Induced Telomerization with a Fluorine-Based Telogen.

Novel pressure-sensitive adhesives (PSA) for low energy substrates were prepared by a solvent-free UV-initiated telomerization process using n-butyl acrylate, butyl methacrylate, and lauryl methacrylate (LMA), with trifluoroethanol (TFEtOH) as a telogen, and acylphosphine oxide (APO) as a radical photoinitiator. A crosslinking monomer (an aliphatic urethane acrylate, L9033) and a radical UV-photoinitiator (α-hydroxyalkylphenone) were also tested as components of the adhesive compositions. The influence of LMA and TFEtOH on the UV-phototelomerization process kinetics and the physicochemical features of the obtained fluorotelomers, as well as the concentration of L9033 on the PSA adhesion to a polyethylene surface, were investigated. FT-IR results indicated that the fluorine groups were successfully introduced into the telomer structure. The highest adhesion relative to a polyethylene substrate (12.3 N/25 mm), and the highest hydrophobicity (with a contact angle of 95° for a water/PSA system) were observed for adhesives based on a telomer syrup containing 5 wt. parts of TFEtOH and 30 wt. parts of LMA (per 100 wt. parts of the monomer mixture). Additionally, it was revealed that a higher aliphatic urethane acrylate content and a higher UV dose increased the adhesion feature.

Reference genes expression stability in Avena sativa L. during compatible and incompatible interactions with Puccinia graminis.

A reliable qPCR experiment requires the selection of reference genes with a stable level of expression in a given experimental system. This study attempts to determine the reference genes (RGs) for the A. sativa-P. graminis experimental setup. We evaluated nine candidate reference genes in A. sativa (oat line Pg4 and the cultivar Kasztan) during compatible and incompatible interactions with different pathotypes of Puccinia graminis f. sp. avenae in six time points post-inoculation. The identification of genes with high expression stability was performed by four algorithms (geNorm, NormFinder, BestKeeper and ΔCt method). We found that the most appropriate combination of RGs for RT-qPCR data normalization were HNR (heterogeneous nuclear ribonucleoprotein 27C) + EF1A (elongation factor 1-alpha) + EIF4A (eukaryotic initiation factor 4A-3). The worst candidates for normalization in this dataset were CYP (cyclophilin) and TUA (alpha tubulin). Identified reference genes are suitable candidates for the standardization of gene expression studies in the A. sativa-P. graminis interaction system and potentially other related pathogens. To date, this is the first report of RGs selection in this pathosystem.

Validation of reference genes as an internal control for studying Avena sativa-Puccinia coronata interaction by RT-qPCR.

In this study we evaluated eleven candidate reference genes in Avena sativa during compatible and incompatible interactions with two different pathotypes of Puccinia coronata f. sp. avenae in six time points post-inoculation. The identification of genes with high expression stability was performed by four algorithms (geNorm, NormFinder, BestKeeper and ΔCt method). The results obtained confirmed that the combination of two genes would be sufficient for reliable normalization of the expression data. In general, the most stable in the tested plant-pathogen system were HNR (heterogeneous nuclear ribonucleoprotein 27C) and EF1A (elongation factor 1-alpha). ARF (ADP-ribosylation factor) and EIF4A (eukaryotic initiation factor 4A-3) could also be considered as exhibiting high expression stability. CYP (cyclophilin) was shown by all assessment methods to be the worst candidate for normalization in this dataset. To date, this is the first report of reference genes selection in A. sativa-P. coronata interaction system. Identified reference genes enable reliable and comprehensive RT-qPCR analysis of oat gene expression in response to crown rust infection. Understanding the molecular mechanisms involved in the host-pathogen interactions may expand knowledge of durable resistance strategies beneficial to modern oat breeding.

Glutathione and copper ions as critical factors of green plant regeneration efficiency of triticale in vitro anther culture.

Plant tissue culture techniques are handy tools for obtaining unique plant materials that are difficult to propagate or important for agriculture. Homozygous materials derived through in vitro cultures are invaluable and significantly accelerate the evaluation of new varieties, e.g., cereals. The induction of somatic embryogenesis/androgenesis and the regeneration and its efficiency can be influenced by the external conditions of tissue culture, such as the ingredients present in the induction or regeneration media. We have developed an approach based on biological system, molecular markers, Fourier Transform Infrared spectroscopy, and structural equation modeling technique to establish links between changes in sequence and DNA methylation at specific symmetric (CG, CHG) and asymmetric (CHH) sequences, glutathione, and green plant regeneration efficiency in the presence of variable supplementation of induction medium with copper ions. The methylation-sensitive Amplified Fragment Length Polymorphism was used to assess tissue culture-induced variation, Fourier Transform Infrared spectroscopy to describe the glutathione spectrum, and a structural equation model to develop the relationship between sequence variation, de novo DNA methylation within asymmetric sequence contexts, and copper ions in the induction medium, as well as, glutathione, and green plant efficiency. An essential aspect of the study is demonstrating the contribution of glutathione to green plant regeneration efficiency and indicating the critical role of copper ions in influencing tissue culture-induced variation, glutathione, and obtaining green regenerants. The model presented here also has practical implications, showing that manipulating the concentration of copper ions in the induction medium may influence cell function and increases green plant regeneration efficiency.

Reference gene selection in bovine caruncular epithelial cells under pregnancy-associated hormones exposure.

Examination of transcriptional regulation occurring during pregnancy establishment and maintenance requires the identification of endogenous reference genes characterized by high expression stability. Since the expression of some reference genes may be modulated by pregnancy-associated hormones, the goal of our study was to identify suitable reference genes unaffected by hormonal treatment. In our study bovine caruncular epithelial cells were subjected to progesterone, estrogen and prostaglandin F2α treatment. Ten candidate reference genes (ACTR1A, CNOT11, HDAC1, HPRT1, RPL19, RPS9, SDHA, SUZ12, UXT and ZNF131) were evaluated with the use of four approaches (geNorm, NormFinder, BestKeeper, delta Ct). We found that RPS9 and SUZ12 displayed the highest expression stability in the tested material. Moreover, HPRT1 and SDHA were found inappropriate for RT-qPCR data normalization as they demonstrated the highest expression variability out of all candidates analysed. Hence geNorm calculations shown that the use of just two best-performing genes would be sufficient for obtaining reliable results, we propose that RPS9 and SUZ12 be used as suitable endogenous controls in future studies investigating gene expression in normal and compromised pregnancies.

Thermoplastic Intumescent Coatings Modified with Pentaerythritol-Occluded Carbon Nanotubes.

A thermoplastic intumescent coating system (IC) based on poly(vinyl acetate) was modified by two forms of multiwalled carbon nanotubes (CNTs), i.e., by a nanofiller powder and its solid dispersions in pentaerythritol (PER-CNTs). It was revealed that only the PER-CNTs modifier allows us to obtain solvent-borne ICs with a relatively high CNTs concentration (1-3 wt. parts of CNTs/100 wt. parts of paint solids) and acceptable application viscosity. Thermal insulation time (TIT) and intumescent factor (IF) of the ICs on a steel substrate (a fire test according to a cellulosic fire curve), as well as morphology, chemical structure (by the FT-IR technique) and mechanical strength of the charred systems, were investigated. It was found that the CNTs powder decreases TIT and IF values while PER-occluded CNTs improve these parameters (e.g., +4.6 min and +102% vs. an unmodified sample, respectively). Compressive strength of the charred ICs was improved by the PER-CNTs modifier as well.

Structural Adhesives Tapes Based on a Solid Epoxy Resin and Multifunctional Acrylic Telomers.

Thermally curable pressure-sensitive structural adhesives tapes (SATs) were compounded using a solid epoxy resin and multifunctional acrylic telomer solutions (MATs) prepared by a thermally initiated telomerization process in an epoxy diluent containing two kinds of telogens (CBr4 or CBrCl3). Dynamic viscosity, K-value, and volatile mater content in MATs (i.e., MAT-T with CBr4, MAT-B with CBrCl3) were investigated in relation to telogen type and content. The influence of MATs on the self-adhesive features and curing behavior of UV-crosslinked tapes as well as on the shear strength of thermally cured aluminum-SAT-aluminum joints was investigated as well. Increasing the telogen dose (from 5 to 15 wt. parts) caused significant improvement in the adhesion (+315% and +184%), tack (+147% and +298%), and cohesion (+414% and +1716%) of SATs based on MAT-T and MAT-B, respectively. Additionally, MATs with high telogen content (especially the MAT-T-type) improved the resistance of cured joints to aviation fuel, humidity, and elevated temperature. The highest overlap shear strength values were registered for SATs based on MATs containing 7.5 wt. parts of CBr4 (16.7 MPa) or 10 wt. parts of CBrCl3 (15.3 MPa).

Development and Characterization of Bioactive Poly(butylene-succinate) Films Modified with Quercetin for Food Packaging Applications.

The preparation of biodegradable active packaging materials is still a major challenge. Here, we report the fabrication and characterization of poly(butylene succinate)-based (PBS) films enriched with a natural polyphenolic antioxidant-quercetin. The PBS-based films with various quercetin content (0.05; 0.10; 0.25 and 0.50 pph on PBS) were prepared via a solvent casting method. Physical (optical, mechanical, thermal, moisture and water sorption, water vapor and UV-vis barrier) and biofunctional (antioxidant and antibacterial against Escherichia coli and Staphylococcus aureus) film properties were tested. The migration of quercetin into model food liquid systems was determined. As a result of quercetin addition, significant changes in color, opacity and UV-blocking effect were observed. The presence of the active substance did not significantly affect the thermal properties of the PBS matrix. However, the mechanical properties of the films were slightly decreased. The films exhibited excellent free radicals (DPPH, ABTS, O2-) scavenging and some bactericidal activities. PBS-quercetin films with superior functional properties have many possibilities for active food packaging applications.

Physical Effects of Radiation Modification of Biodegradable Xylitol-Based Materials Synthesized Using a Combination of Different Monomers.

There is a possibility of obtaining xylitol-based elastomers sharing common characteristics of biodegradability, thermal stability, and elastomeric behavior by using monomers with different chain-lengths. Therefore, we have synthesized eight elastomers using a combination of four different diols (ethanediol, 1.3-propanediol, 1.4-buanediol, and 1.5-pentanediol) and two different dicarboxylic acids (succinic acid and adipic acid). The obtained materials were further modified by performing e-beam treatment with a dose of 100 kGy. Materials both before and after radiation modification were tested by DSC, DMTA, TGA, tensile tests, gel fraction determination, hydrolytic and enzymatic degradation tests, 1H NMR and 13C NMR and FTIR.

Synthesis and Characterization of Novel Hybrid Flocculants Based on Potato Starch Copolymers with Hollow Carbon Spheres.

Novel carbon nanofiller-based starch-g-polyacrylamide hybrid flocculation materials (St-PAM-CS) were in situ prepared using potato starch (St), acrylamide (AM), and hollow mesoporous carbon spheres (CSs; diameters of 300-400 nm). Structures of different St-PAM-CS systems were characterized by Fourier transform infrared (FTIR) spectroscopy, X-Ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), laser scanning microscopy (LSM), and particle size analysis. The flocculation tests were evaluated by removing high turbidity kaolin suspension-initial absorbance 1.84. The effect of the St to AM molar ratio, doses, and content of CSs in hybrids on flocculation efficiency were examined. Satisfactory flocculation efficiency was obtained for all hybrids with 1 wt.% of the CS component. The highest reduction of the kaolin suspension absorbance (to 0.06) was observed for a 3 mL dose of the starch hybrid with the highest AM content. Additionally, St-PAM-CS showed a reduction in the sludge volume in time. The hybrids reached better flocculation efficiency in relation to the reference systems without CSs. The proposed flocculation mechanism (considering bridging, patching, and formation of hydrogen bonds) has been confirmed by the recorded results.

E-Beam Effects on Poly(Xylitol Dicarboxylate-co-diol Dicarboxylate) Elastomers Tailored by Adjusting Monomer Chain Length.

Poly(xylitol dicarboxylate-co-diol dicarboxylate) elastomers can by synthesized using wide variety of monomers with different chain lengths. Obtained materials are all biodegradable, thermally stable elastomers, but their specific properties like glass transition temperature, degradation susceptibility, and mechanical moduli can be tailored for a specific application. Therefore, we synthesized eight elastomers using a combination of two dicarboxylic acids, namely suberic and sebacic acid, and four different diols, namely ethanediol, 1,3-propanediol, 1,4-buanediol, and 1,5-pentanediol. Materials were further modified by e-beam treatment with a dose of 100 kGy. Materials both before and after radiation modification were tested using tensile tests, gel fraction determination, 1H NMR, and 13C NMR. Thermal properties were tested by Differential Scanning Calorimetry (DSC), Dynamic Thermomechanical Analysis (DMTA) and Thermogravimetric Analysis (TGA). Degradation susceptibility to both enzymatic and hydrolytic degradation was also determined.

Is Every Wild Species a Rich Source of Disease Resistance? Avena fatua L.-Potential Donor of Resistance to Powdery Mildew.

Identifying effective sources of disease resistance is an important aspect of an effective plant protection strategy. Wild species related to cultivars constitute a rich reservoir of resistance genes. Studies conducted in oat have shown that wild species are donors of resistance genes to crown and stem rust, powdery mildew or fusarium head blight. The aim of the present study was to prove whether A. fatua could be a source of effective resistance genes to powdery mildew. This species is widespread all over the world due to its very good adaptability and can be regarded as a potential source of resistance to fungal diseases, including powdery mildew. The conducted research has shown that A. fatua is a species with a low level of resistance to powdery mildew when compared to other wild species of the genus Avena L. A total of 251 accessions were evaluated, and only 23 were identified as resistant to the individual isolates used in the host-pathogen tests. It follows that resistance to powdery mildew is not common among wild Avena species, and its good environmental adaptation is not associated to resistance to powdery mildew.

Epoxy-Based Structural Self-Adhesive Tapes Modified with Acrylic Syrups Prepared via a Free Radical Photopolymerization Process.

New modifiers (i.e., acrylic syrups; ASs) of epoxy-resin-based thermally curable structural self-adhesive tapes (SATs) were prepared via a free radical bulk polymerization (FRBP) of n-butyl acrylate, butyl methacrylate, glycidyl methacrylate, and hydroxybutyl acrylate. In the process, two kinds of UV-photoinitiators (i.e., monoacylphosphine oxide/Omnirad TPO and bisacylphosphine oxide/Omnirad 819) and various mixing speed of the monomers mixture (200-1000 rpm) were applied. The TPO-based syrups exhibited a lower copolymers content (10-24 wt%), dynamic viscosity (<0.1 Pa·s), molecular weights (Mn and Mw, and polydispersity (1.9-2.5) than these with Omnirad 819. Additionally, the higher mixing speed significantly reduced monomers conversion and viscosity of ASs as well as molecular weights of the acrylate copolymers. These parameters influenced the properties of thermally uncured (e.g., adhesion) and thermally cured SATs (shear strength of aluminum/SAT/aluminum overlap joints). Better self-adhesive features were observed for SATs-TPO (based on ASs with lower monomers conversion, Mn and Mw); however, a slightly higher shear strength was noted for the thermally cured SAT-819 (ASs with higher monomers conversion, Mn and Mw). An impact of polydispersity of the acrylate copolymers as well as crosslinking degree of thermally cured SATs on the mechanical strength was also revealed.

Effect of the B:Zn:H2O Molar Ratio on the Properties of Poly(Vinyl Acetate) and Zinc Borate-Based Intumescent Coating Materials Exposed to a Quasi-Real Cellulosic Fire.

In order to investigate an influence of the B:Zn:H2O molar ratio on the fire protection efficiency of poly(vinyl acetate)-based thermoplastic intumescent coating materials (ICs), systems containing ammonium polyphosphate, melamine, pentaerythritol and different types of zinc borates (ZBs) were tested in a vertical position in quasi-real fire conditions. 3ZnO·2B2O3·6H2O (ZB6), 2ZnO·3B2O3·3.5H2O (ZB3.5) or 3ZnO·2B2O3 (ZB0) were added in amounts of 1-10 wt. parts/100 wt. parts of the other coating components mixture. Char formation processes and thermal insulation features were investigated using an open-flame furnace heated according to the cellulosic fire curve. Thermogravimetric features (DTG), chemical structures (FTIR) and mechanical strength of the ICs and the chars were analyzed as well. It was revealed that the type and dose of the ZBs significantly affect thermal insulation time (TIT) (up to 450 °C of a steel substrate) and sagging (SI) of the fire-heated coatings as well as the compressive strength of the created chars. The highest TIT value (+89%) was noted for the sample with 2.5 wt. parts of ZB3.5 while the lowest SI (-65%) was observed for the coatings containing 10 wt. parts of the hydrated borates (i.e., ZB3.5 or ZB6). The best mechanical strength was registered for the sample filled with the anhydrous modifier (3 wt. parts of ZB0). The presented results show that the ICs with the proper ZBs can be used for effective fire protection of vertically positioned steel elements.