Adsorption of o-, m- and p-nitrophenols onto organically modified bentonites.

Experiments were conducted on the adsorption characteristics of o-, m- and p-nitrophenols by organically modified bentonites at different temperatures. Two organobentonites (HDTMA-B and PEG-B) were synthesized using hexadecyltrimethylammonium bromide (HDTMABr) and poly(ethylene glycol) butyl ether (PEG). Synthesized HDTMA-B and PEG-B were characterized by XRD, FTIR and DTA-TG analyses and their specific surface area, particle size and pore size distributions were determined. BET surface areas and basal spacings (d(001)) of the HDTMA-B and PEG-B were found to be 38.71 m(2)g(-1), 69.04 m(2)g(-1) and 21.96 Å, 15.17 Å, respectively. Increased adsorption with temperature indicates that the process is endothermic for o-nitrophenol. On the other hand m- and p-nitrophenols exhibited lower rates of adsorption at higher temperatures suggesting a regular exothermic process taking place. Results were analyzed according to the Langmuir, Freundlich and Dubinin-Redushkevich (D-R) isotherm equations using linearized correlation coefficient at different temperatures. R(L) separation factors for Langmuir and the n values for Freundlich isotherms showed that m- and p-nitrophenols are favorably adsorbed by HDTMA-B and, p-nitrophenol is favored by PEG-B. Adsorption of o-, m- and p-nitrophenols as single components or from their binary mixtures on HDTMA-B and, p-nitrophenol on PEG-B are all defined to be physical in nature.

Adsorption of Pb(II) ions from aqueous solution by native and activated bentonite: kinetic, equilibrium and thermodynamic study.

In this study, the adsorption kinetics, equilibrium and thermodynamics of Pb(II) ions on native (NB) and acid activated (AAB) bentonites were examined. The specific surface areas, pore size and pore-size distributions of the samples were fully characterized. The adsorption efficiency of Pb(II) onto the NB and AAB was increased with increasing temperature. The kinetics of adsorption of Pb(II) ions was discussed using three kinetic models, the pseudo-first-order, the pseudo-second-order and the intra-particle diffusion model. The experimental data fitted very well the pseudo-second-order kinetic model. The initial sorption rate and the activation energy were also calculated. The activation energy of the sorption was calculated as 16.51 and 13.66 kJ mol(-1) for NB and AAB, respectively. Experimental results were also analysed by the Langmuir, Freundlich and Dubinin-Redushkevich (D-R) isotherm equations at different temperatures. R(L) separation factor for Langmuir and the n value for Freundlich isotherm show that Pb(II) ions are favorably adsorbed by NB and AAB. Thermodynamic quantities such as Gibbs free energy (DeltaG), the enthalpy (DeltaH) and the entropy change of sorption (DeltaS) were determined as about -5.06, 10.29 and 0.017 kJ mol(-1) K(-1), respectively for AAB. It was shown that the sorption processes were an endothermic reactions, controlled by physical mechanisms and spontaneously.

Equilibrium and kinetic studies for the sorption of 3-methoxybenzaldehyde on activated kaolinites.

The sorption of 3-methoxybenzaldehyde on activated kaolinites has been investigated at different temperatures. Two types of activation tests were performed. The sorption equilibrium was studied by sorption isotherms in the temperature range 303-333K for natural (untreated), thermally and acid activated kaolinites. It was shown that the isotherm shapes were not affected by temperature and activation types of kaolinite. The absorbance data at 312nm were fitted reasonably well with the Langmuir and Freundlich isotherm models and the model parameters were determined for different temperatures. Thermodynamic quantities such as Gibbs free energy (DeltaG), the enthalpy (DeltaH) and the entropy change of sorption (DeltaS) were determined for natural, thermally and acid activated kaolinites. It was shown that the sorption processes were an endothermic reactions, controlled by physical mechanisms and spontaneously. Adsorption capacity of acid activated kaolinite for 3-methoxybenzaldehyde was higher compared to that of natural and thermally activated kaolinites at various temperatures. The adsorption and desorption rate constants (k(a) and k(d)) were obtained separately by applying a geometric approach to the first order Langmuir model. This method provided good conformity between the K from Langmuir parameters and K(geo) (k(a)/k(d)) from geometric approach.