Impact of late gadolinium enhancement image acquisition resolution on neural network based automatic scar segmentation.

BACKGROUND: Automatic myocardial scar segmentation from late gadolinium enhancement (LGE) images using neural networks promises an alternative to time-consuming and observer-dependent semi-automatic approaches. However, alterations in data acquisition, reconstruction as well as post-processing may compromise network performance. The objective of the present work was to systematically assess network performance degradation due to a mismatch of point-spread function between training and testing data. METHODS: Thirty-six high-resolution (0.7×0.7×2.0 mm3) LGE k-space datasets were acquired post-mortem in porcine models of myocardial infarction. The in-plane point-spread function and hence in-plane resolution Δx was retrospectively degraded using k-space lowpass filtering, while field-of-view and matrix size were kept constant. Manual segmentation of the left ventricle (LV) and healthy remote myocardium was performed to quantify location and area (% of myocardium) of scar by thresholding (≥ SD5 above remote). Three standard U-Nets were trained on training resolutions Δxtrain = 0.7, 1.2 and 1.7 mm to predict endo- and epicardial borders of LV myocardium and scar. The scar prediction of the three networks for varying test resolutions (Δxtest = 0.7 to 1.7 mm) was compared against the reference SD5 thresholding at 0.7 mm. Finally, a fourth network trained on a combination of resolutions (Δxtrain = 0.7 to 1.7 mm) was tested. RESULTS: The prediction of relative scar areas showed the highest precision when the resolution of the test data was identical to or close to the resolution used during training. The median fractional scar errors and precisions (IQR) from networks trained and tested on the same resolution were 0.0 percentage points (p.p.) (1.24 - 1.45), and - 0.5 - 0.0 p.p. (2.00 - 3.25) for networks trained and tested on the most differing resolutions, respectively. Deploying the network trained on multiple resolutions resulted in reduced resolution dependency with median scar errors and IQRs of 0.0 p.p. (1.24 - 1.69) for all investigated test resolutions. CONCLUSION: A mismatch of the imaging point-spread function between training and test data can lead to degradation of scar segmentation when using current U-Net architectures as demonstrated on LGE porcine myocardial infarction data. Training networks on multi-resolution data can alleviate the resolution dependency.

Relaxation enhancement by microwave irradiation may limit dynamic nuclear polarization.

Dynamic nuclear polarization enables the hyperpolarization of nuclear spins beyond the thermal-equilibrium Boltzmann distribution. However, it is often unclear why the experimentally measured hyperpolarization is below the theoretically achievable maximum polarization. We report a (near-) resonant relaxation enhancement by microwave (MW) irradiation, leading to a significant increase in the nuclear polarization decay compared to measurements without MW irradiation. For example, the increased nuclear relaxation limits the achievable polarization levels to around 35% instead of hypothetical 60%, measured in the DNP material TEMPO in 1H glassy matrices at 3.3 K and 7 T. Applying rate-equation models to published build-up and decay data indicates that such relaxation enhancement is a common issue in many samples when using different radicals at low sample temperatures and high Boltzmann polarizations of the electrons. Accordingly, quantification and a better understanding of the relaxation processes under MW irradiation might help to design samples and processes towards achieving higher nuclear hyperpolarization levels.

Beat phenomena of oscillating readouts.

PURPOSE: To demonstrate slowly varying, erroneous magnetic field gradients for oscillating readouts due to the mechanically resonant behavior of gradient systems. METHODS: Projections of a static phantom were acquired using a one-dimensional (1D) EPI sequence with varying EPI frequencies ranging from 1121 to 1580 Hz on clinical 3T systems (30 mT/m, 200 T/m/s). Phase due to static B0 inhomogeneities was eliminated by a complex division of two separate scans with different polarities of the EPI readout. The temporal evolution of phase was evaluated and related to the mechanical resonances of the gradient systems derived from the gradient modulation transfer function. Additionally, the impact of temporally varying mechanical resonance effects on EPI was evaluated using an echo-planar spectroscopic imaging sequence. RESULTS: A beat phenomenon resulting in a slowly varying phase was observed. Its temporal frequency was given by the difference between the EPI frequency and the mechanical resonance frequency of the activated gradient axis. The maximum erroneous, oscillating phase during phase encoding was ±0.5 rad for an EPI frequency of 1281 Hz. Echo-planar spectroscopic imaging images showed the resulting time-dependent stretching/compression of the FOV. CONCLUSION: Oscillating readouts such as those used in EPI can result in low-frequency, erroneous phase contributions, which are explained by the beat phenomenon. Therefore, EPI phase-correction approaches may need to include beat effects for accurate image reconstruction.

CMRsim-A python package for cardiovascular MR simulations incorporating complex motion and flow.

PURPOSE: To present an open-source MR simulation framework that facilitates the incorporation of complex motion and flow for studying cardiovascular MR (CMR) acquisition and reconstruction. METHODS: CMRsim is a Python package that allows simulation of CMR images using dynamic digital phantoms with complex motion as input. Two simulation paradigms are available, namely, numerical and analytical solutions to the Bloch equations, using a common motion representation. Competitive simulation speeds are achieved using TensorFlow for GPU acceleration. To demonstrate the capability of the package, one introductory and two advanced CMR simulation experiments are presented. The latter showcase phase-contrast imaging of turbulent flow downstream of a stenotic section and cardiac diffusion tensor imaging on a contracting left ventricle. Additionally, extensive documentation and example resources are provided. RESULTS: The Bloch simulation with turbulent flow using approximately 1.5 million particles and a sequence duration of 710 ms for each of the seven different velocity encodings took a total of 29 min on a NVIDIA Titan RTX GPU. The results show characteristic phase contrast and magnitude modulation present in real data. The analytical simulation of cardiac diffusion tensor imaging with bulk-motion phase sensitivity took approximately 10 s per diffusion-weighted image, including preparation and loading steps. The results exhibit the expected alteration of diffusion metrics due to strain. CONCLUSION: CMRsim is the first simulation framework that allows one to feasibly incorporate complex motion, including turbulent flow, to systematically study advanced CMR acquisition and reconstruction approaches. The open-source package features modularity and transparency, facilitating maintainability and extensibility in support of reproducible research.

Modelling and correcting the impact of RF pulses for continuous monitoring of hyperpolarized NMR.

Monitoring the build-up or decay of hyperpolarization in nuclear magnetic resonance requires radio-frequency (RF) pulses to generate observable nuclear magnetization. However, the pulses also lead to a depletion of the polarization and, thus, alter the spin dynamics. To simulate the effects of RF pulses on the polarization build-up and decay, we propose a first-order rate-equation model describing the dynamics of the hyperpolarization process through a single source and a relaxation term. The model offers a direct interpretation of the measured steady-state polarization and build-up time constant. Furthermore, the rate-equation model is used to study three different methods to correct the errors introduced by RF pulses: (i) a 1/cos⁡n-1θ correction (θ denoting the RF pulse flip angle), which is only applicable to decays; (ii) an analytical model introduced previously in the literature; and (iii) an iterative correction approach proposed here. The three correction methods are compared using simulated data for a range of RF flip angles and RF repetition times. The correction methods are also tested on experimental data obtained with dynamic nuclear polarization (DNP) using 4-oxo-TEMPO in 1H glassy matrices. It is demonstrated that the analytical and iterative corrections allow us to obtain accurate build-up times and steady-state polarizations (enhancements) for RF flip angles of up to 25∘ during the polarization build-up process within ±10 % error when compared to data acquired with small RF flip angles (<3 ∘). For polarization decay experiments, corrections are shown to be accurate for RF flip angles of up to 12∘. In conclusion, the proposed iterative correction allows us to compensate for the impact of RF pulses offering an accurate estimation of polarization levels, build-up and decay time constants in hyperpolarization experiments.

4D Flow cardiovascular magnetic resonance consensus statement: 2023 update.

Hemodynamic assessment is an integral part of the diagnosis and management of cardiovascular disease. Four-dimensional cardiovascular magnetic resonance flow imaging (4D Flow CMR) allows comprehensive and accurate assessment of flow in a single acquisition. This consensus paper is an update from the 2015 '4D Flow CMR Consensus Statement'. We elaborate on 4D Flow CMR sequence options and imaging considerations. The document aims to assist centers starting out with 4D Flow CMR of the heart and great vessels with advice on acquisition parameters, post-processing workflows and integration into clinical practice. Furthermore, we define minimum quality assurance and validation standards for clinical centers. We also address the challenges faced in quality assurance and validation in the research setting. We also include a checklist for recommended publication standards, specifically for 4D Flow CMR. Finally, we discuss the current limitations and the future of 4D Flow CMR. This updated consensus paper will further facilitate widespread adoption of 4D Flow CMR in the clinical workflow across the globe and aid consistently high-quality publication standards.

Analysis of temporal encoding efficiency of MR fingerprinting sequences.

PURPOSE: MR Fingerprinting (MRF) relies on highly-undersampled images to simultaneously estimate multiple tissue parameters of interest. While a good understanding of the encoding principle behind MRF exists, we want to shed light on the question of when parameters are encoded during an MRF acquisition. THEORY AND METHODS: We analyze the importance of each time point by leaving it out during matching (leave-one-out, LOO) assuming linear reconstruction is applied and study its influence on the reconstructed parameter map. To accelerate the analysis, we treat LOO as a small perturbation (LOOP) to the full matching problem and derive an analytical formula by leveraging Stolk and Sbrizzi's analysis on the interplay of k-space sampling and transient state dynamics. To study the influence of geometry and parameter distribution, we deploy LOOP on randomly sliced 3D brain geometries with randomized T1/T2 values to identify primary encoding regions independent of geometry. RESULTS: LOOP can be evaluated orders of magnitude faster than conventional matching and visualizes temporal encoding efficiency. We use the findings to accelerate an MRF sequence by truncation as well as to remove undersampling artifacts through an iterative omission scheme in an ill-working MRF sequence in both in-silico and in-vivo experiments. CONCLUSION: LOOP is an analytical approach to quantify and visualize parameter encoding in MRF.

Clinical quantitative coronary artery stenosis and coronary atherosclerosis imaging: a Consensus Statement from the Quantitative Cardiovascular Imaging Study Group.

The detection and characterization of coronary artery stenosis and atherosclerosis using imaging tools are key for clinical decision-making in patients with known or suspected coronary artery disease. In this regard, imaging-based quantification can be improved by choosing the most appropriate imaging modality for diagnosis, treatment and procedural planning. In this Consensus Statement, we provide clinical consensus recommendations on the optimal use of different imaging techniques in various patient populations and describe the advances in imaging technology. Clinical consensus recommendations on the appropriateness of each imaging technique for direct coronary artery visualization were derived through a three-step, real-time Delphi process that took place before, during and after the Second International Quantitative Cardiovascular Imaging Meeting in September 2022. According to the Delphi survey answers, CT is the method of choice to rule out obstructive stenosis in patients with an intermediate pre-test probability of coronary artery disease and enables quantitative assessment of coronary plaque with respect to dimensions, composition, location and related risk of future cardiovascular events, whereas MRI facilitates the visualization of coronary plaque and can be used in experienced centres as a radiation-free, second-line option for non-invasive coronary angiography. PET has the greatest potential for quantifying inflammation in coronary plaque but SPECT currently has a limited role in clinical coronary artery stenosis and atherosclerosis imaging. Invasive coronary angiography is the reference standard for stenosis assessment but cannot characterize coronary plaques. Finally, intravascular ultrasonography and optical coherence tomography are the most important invasive imaging modalities for the identification of plaques at high risk of rupture. The recommendations made in this Consensus Statement will help clinicians to choose the most appropriate imaging modality on the basis of the specific clinical scenario, individual patient characteristics and the availability of each imaging modality.

Ramping down a clinical 3 T scanner: a journey into MRI and MRS at 0.75 T.

OBJECT: Lower-field MR is reemerging as a viable, potentially cost-effective alternative to high-field MR, thanks to advances in hardware, sequence design, and reconstruction over the past decades. Evaluation of lower field strengths, however, is limited by the availability of lower-field systems on the market and their considerable procurement costs. In this work, we demonstrate a low-cost, temporary alternative to purchasing a dedicated lower-field MR system. MATERIALS AND METHODS: By ramping down an existing clinical 3 T MRI system to 0.75 T, proton signals can be acquired using repurposed 13C transmit/receive hardware and the multi-nuclei spectrometer interface. We describe the ramp-down procedure and necessary software and hardware changes to the system. RESULTS: Apart from presenting system characterization results, we show in vivo examples of cardiac cine imaging, abdominal two- and three-point Dixon-type water/fat separation, water/fat-separated MR Fingerprinting, and point-resolved spectroscopy. In addition, the ramp-down approach allows unique comparisons of, e.g., gradient fidelity of the same MR system operated at different field strengths using the same receive chain, gradient coils, and amplifiers. DISCUSSION: Ramping down an existing MR system may be seen as a viable alternative for lower-field MR research in groups that already own multi-nuclei hardware and can also serve as a testing platform for custom-made multi-nuclei transmit/receive coils.

MRXCAT2.0: Synthesis of realistic numerical phantoms by combining left-ventricular shape learning, biophysical simulations and tissue texture generation.

BACKGROUND: Standardised performance assessment of image acquisition, reconstruction and processing methods is limited by the absence of images paired with ground truth reference values. To this end, we propose MRXCAT2.0 to generate synthetic data, covering healthy and pathological function, using a biophysical model. We exemplify the approach by generating cardiovascular magnetic resonance (CMR) images of healthy, infarcted, dilated and hypertrophic left-ventricular (LV) function. METHOD: In MRXCAT2.0, the XCAT torso phantom is coupled with a statistical shape model, describing population (patho)physiological variability, and a biophysical model, providing known and detailed functional ground truth of LV morphology and function. CMR balanced steady-state free precession images are generated using MRXCAT2.0 while realistic image appearance is ensured by assigning texturized tissue properties to the phantom labels. FINDING: Paired CMR image and ground truth data of LV function were generated with a range of LV masses (85-140 g), ejection fractions (34-51%) and peak radial and circumferential strains (0.45 to 0.95 and - 0.18 to - 0.13, respectively). These ranges cover healthy and pathological cases, including infarction, dilated and hypertrophic cardiomyopathy. The generation of the anatomy takes a few seconds and it improves on current state-of-the-art models where the pathological representation is not explicitly addressed. For the full simulation framework, the biophysical models require approximately two hours, while image generation requires a few minutes per slice. CONCLUSION: MRXCAT2.0 offers synthesis of realistic images embedding population-based anatomical and functional variability and associated ground truth parameters to facilitate a standardized assessment of CMR acquisition, reconstruction and processing methods.

AI Cardiac MRI Scar Analysis Aids Prediction of Major Arrhythmic Events in the Multicenter DERIVATE Registry.

Background Scar burden with late gadolinium enhancement (LGE) cardiac MRI (CMR) predicts arrhythmic events in patients with postinfarction in single-center studies. However, LGE analysis requires experienced human observers, is time consuming, and introduces variability. Purpose To test whether postinfarct scar with LGE CMR can be quantified fully automatically by machines and to compare the ability of LGE CMR scar analyzed by humans and machines to predict arrhythmic events. Materials and Methods This study is a retrospective analysis of the multicenter, multivendor CarDiac MagnEtic Resonance for Primary Prevention Implantable CardioVerter DebrillAtor ThErapy (DERIVATE) registry. Patients with chronic heart failure, echocardiographic left ventricular ejection fraction (LVEF) of less than 50%, and LGE CMR were recruited (from January 2015 through December 2020). In the current study, only patients with ischemic cardiomyopathy were included. Quantification of total, dense, and nondense scars was carried out by two experienced readers or a Ternaus network, trained and tested with LGE images of 515 and 246 patients, respectively. Univariable and multivariable Cox analyses were used to assess patient and cardiac characteristics associated with a major adverse cardiac event (MACE). Area under the receiver operating characteristic curve (AUC) was used to compare model performances. Results In 761 patients (mean age, 65 years ± 11, 671 men), 83 MACEs occurred. With use of the testing group, univariable Cox-analysis found New York Heart Association class, left ventricle volume and/or function parameters (by echocardiography or CMR), guideline criterion (LVEF of ≤35% and New York Heart Association class II or III), and LGE scar analyzed by humans or the machine-learning algorithm as predictors of MACE. Machine-based dense or total scar conferred incremental value over the guideline criterion for the association with MACE (AUC: 0.68 vs 0.63, P = .02 and AUC: 0.67 vs 0.63, P = .01, respectively). Modeling with competing risks yielded for dense and total scar (AUC: 0.67 vs 0.61, P = .01 and AUC: 0.66 vs 0.61, P = .005, respectively). Conclusion In this analysis of the multicenter CarDiac MagnEtic Resonance for Primary Prevention Implantable CardioVerter DebrillAtor ThErapy (DERIVATE) registry, fully automatic machine learning-based late gadolinium enhancement analysis reliably quantifies myocardial scar mass and improves the current prediction model that uses guideline-based risk criteria for implantable cardioverter defibrillator implantation. ClinicalTrials.gov registration no.: NCT03352648 Published under a CC BY 4.0 license. Supplemental material is available for this article.

Considerations for hyperpolarized 13 C MR at reduced field: Comparing 1.5T versus 3T.

PURPOSE: In contrast to conventional MR, signal-to-noise ratio (SNR) is not linearly dependent on field strength in hyperpolarized MR, as polarization is generated outside the MR system. Moreover, field inhomogeneity-induced artifacts and other practical limitations associated with field strengths ≥ $$ \ge $$ 3T are alleviated at lower fields. The potential of hyperpolarized 13 $$ {}^{13} $$ C spectroscopy and imaging at 1.5T versus 3T is demonstrated in silico, in vitro, and in vivo for applications on clinical MR systems. THEORY AND METHODS: Theoretical noise and SNR behavior at different field strengths are investigated based on simulations. A thorough field comparison between 1.5T and 3T is performed using thermal and hyperpolarized 13 $$ {}^{13} $$ C spectroscopy and imaging. Cardiac in vivo data is obtained in pigs using hyperpolarized [1- 13 $$ {}^{13} $$ C]pyruvate spectroscopy and imaging at 1.5T and 3T. RESULTS: Based on theoretical considerations and simulations, the SNR of hyperpolarized MR at identical acquisition bandwidths is independent of the field strength for typical coil setups, while adaptively changing the acquisition bandwidth proportional to the static magnetic field allows for net SNR gains of up to 40% at 1.5T compared to 3T. In vitro 13 $$ {}^{13} $$ C data verified these considerations with less than 7% deviation. In vivo feasibility of hyperpolarized [1- 13 $$ {}^{13} $$ C]pyruvate dynamic metabolic spectroscopy and imaging at 1.5T is demonstrated in the pig heart with comparable SNR between 1.5T and 3T while B 0 $$ {}_0 $$ artifacts are noticeably reduced at 1.5T. CONCLUSION: Hyperpolarized 13 $$ {}^{13} $$ C MR at lower field strengths is favorable in terms of SNR and off-resonance effects, which makes 1.5T a promising alternative to 3T, especially for clinical cardiac metabolic imaging.

Diffuse myocardial fibrosis precedes subclinical functional myocardial impairment and provides prognostic information in systemic sclerosis.

AIMS: Myocardial involvement is common in patients with systemic sclerosis (SSc) and causes myocardial fibrosis and subtle ventricular dysfunction. However, the temporal onset of myocardial involvement during the progression of the disease and its prognostic value are yet unknown. We used cardiovascular magnetic resonance (CMR) to investigate subclinical functional impairment and diffuse myocardial fibrosis in patients with very early diagnosis of SSc (VEDOSS) and established SSc and examined whether this was associated with mortality. METHODS AND RESULTS: One hundred and ten SSc patients (86 established SSc, 24 VEDOSS) and 15 healthy controls were prospectively recruited. The patients were followed-up for a median duration of 7.0 years (interquartile range 6.0-7.3 years). Study subjects underwent CMR including assessment of myocardial fibrosis [native T1 and extracellular volume (ECV)] and measurement of global longitudinal (GLS) and circumferential (GCS) myocardial strain. Native T1 values and ECV were elevated in VEDOSS and SSc patients compared with controls (P < 0.001). GLS was similar in VEDOSS and controls but significantly impaired in patients with established SSc (P < 0.001). GCS was similar over all groups (P = 0.88). There were 12 deaths during follow-up. Elevated native T1 [hazard ratio (HR) 5.8, 95% confidence interval (CI): 1.7-20.4; P = 0.006] and reduced GLS (HR 6.1, 95% CI: 1.3-29.9; P = 0.038) identified subjects with increased risk of death. Only native T1 was predictive for cardiovascular mortality (P < 0.001). CONCLUSION: Subclinical myocardial involvement first manifests as diffuse myocardial fibrosis identified by the expansion of ECV and increased native T1 in VEDOSS patients while subtle functional impairment only occurs in established SSc. Native T1 and GLS have prognostic value for all-cause mortality in SSc patients.

Diagnostic performance of 3D cardiac magnetic resonance perfusion in elderly patients for the detection of coronary artery disease as compared to fractional flow reserve.

OBJECTIVES: In patients of advanced age, the feasibility of myocardial ischemia testing might be limited by age-related comorbidities and falling compliance abilities. Therefore, we aimed to test the accuracy of 3D cardiac magnetic resonance (CMR) stress perfusion in the elderly population as compared to reference standard fractional flow reserve (FFR). METHODS: Fifty-six patients at age 75 years or older (mean age 79 ± 4 years, 35 male) underwent 3D CMR perfusion imaging and invasive coronary angiography with FFR in 5 centers using the same study protocol. The diagnostic accuracy of CMR was compared to a control group of 360 patients aged below 75 years (mean age 61 ± 9 years, 262 male). The percentage of myocardial ischemic burden (MIB) relative to myocardial scar burden was further analyzed using semi-automated software. RESULTS: Sensitivity, specificity, and positive and negative predictive values of 3D perfusion CMR deemed similar for both age groups in the detection of hemodynamically relevant (FFR < 0.8) stenosis (≥ 75 years: 86%, 83%, 92%, and 75%; < 75 years: 87%, 80%, 82%, and 85%; p > 0.05 all). While MIB was larger in the elderly patients (15% ± 17% vs. 9% ± 13%), the diagnostic accuracy of 3D CMR perfusion was high in both elderly and non-elderly populations to predict pathological FFR (AUC: 0.906 and 0.866). CONCLUSIONS: 3D CMR perfusion has excellent diagnostic accuracy for the detection of hemodynamically relevant coronary stenosis, independent of patient age. KEY POINTS: • The increasing prevalence of coronary artery disease in elderly populations is accompanied with a larger ischemic burden of the myocardium as compared to younger individuals. • 3D cardiac magnetic resonance perfusion imaging predicts pathological fractional flow reserve in elderly patients aged ≥ 75 years with high diagnostic accuracy. • Ischemia testing with 3D CMR perfusion imaging has similarly high accuracy in the elderly as in younger patients and it might be particularly useful when other non-invasive techniques are limited by aging-related comorbidities and falling compliance abilities.

Pathophysiology of LV Remodeling Following STEMI: A Longitudinal Diffusion Tensor CMR Study.

BACKGROUND: Adverse LV remodeling post-ST-segment elevation myocardial infarction (STEMI) is associated with a poor prognosis, but the underlying mechanisms are not fully understood. Diffusion tensor (DT)-cardiac magnetic resonance (CMR) allows in vivo characterization of myocardial architecture and provides unique mechanistic insight into pathophysiologic changes following myocardial infarction. OBJECTIVES: This study evaluated the potential associations between DT-CMR performed soon after STEMI and long-term adverse left ventricular (LV) remodeling following STEMI. METHODS: A total of 100 patients with STEMI underwent CMR at 5 days and 12 months post-reperfusion. The protocol included DT-CMR for assessing fractional anisotropy (FA), secondary eigenvector angle (E2A) and helix angle (HA), cine imaging for assessing LV volumes, and late gadolinium enhancement for calculating infarct and microvascular obstruction size. Adverse remodeling was defined as a 20% increase in LV end-diastolic volume at 12 months. RESULTS: A total of 32 patients experienced adverse remodeling at 12 months. Compared with patients without adverse remodeling, they had lower FA (0.23 ± 0.03 vs 0.27 ± 0.04; P < 0.001), lower E2A (37 ± 6° vs 51 ± 7°; P < 0.001), and, on HA maps, a lower proportion of myocytes with right-handed orientation (RHM) (8% ± 5% vs 17% ± 9%; P < 0.001) in their acutely infarcted myocardium. On multivariable logistic regression analysis, infarct FA (odds ratio [OR]: <0.01; P = 0.014) and E2A (OR: 0.77; P = 0.001) were independent predictors of adverse LV remodeling after adjusting for left ventricular ejection fraction (LVEF) and infarct size. There were no significant changes in infarct FA, E2A, or RHM between the 2 scans. CONCLUSIONS: Extensive cardiomyocyte disorganization (evidenced by low FA), acute loss of sheetlet angularity (evidenced by low E2A), and a greater loss of organization among cardiomyocytes with RHM, corresponding to the subendocardium, can be detected within 5 days post-STEMI. These changes persist post-injury, and low FA and E2A are independently associated with long-term adverse remodeling.

Preliminary experience of cardiac proton spectroscopy at 0.75 T.

Recent work on high-performance lower-field MR systems has renewed the interest in assessing relative advantages and disadvantages of magnetic fields less than 1 T. The objective of the present work was to investigate signal-to-noise ratio (SNR) scaling of point-resolved spectroscopy as a function of field strength and to test the feasibility of proton MRS of triglycerides (TGs) in human in vivo myocardium at 0.75 T relative to 1.5 T and 3 T. Measurements at 0.75 T were obtained by temporarily ramping down a clinical 3 T MR scanner. System configurations at 0.75, 1.5 and 3 T featured identical hard- and software, except for differences in transmit/receive coil geometries and receive channel count, which were accounted for in SNR comparisons. Proton MRS was performed at 0.75 T, 1.5 T and 3 T in ex vivo tissue and in vivo calf muscle to measure T1 and T2 values as a function of field strength, which in turn served as input to simulations of SNR scaling and field-dependent TG fit errors. Preliminary in vivo spectra of myocardium were acquired at 0.75 T, 1.5 T and 3 T in healthy subjects. Measurements of both ex vivo tissue and in vivo muscle tissue at 0.75 T versus 1.5 T and 3 T confirmed decreasing T1 and increasing T2 * for decreasing field strengths. Using measured T1 , T2 and T2 * as input and using field-dependent echo time and bandwidth scaling, simulated Cramér-Rao lower bounds of TG amplitudes at 0.75 T were 2.3 and 4.5 times larger with respect to 1.5 T and 3 T, respectively. In vivo measurements demonstrate that human proton spectroscopy of TGs in cardiac muscle is feasible at 0.75 T, supporting the potential practical value of lower-field high-performance MR systems.

Hyperpolarized Metabolic and Parametric CMR Imaging of Longitudinal Metabolic-Structural Changes in Experimental Chronic Infarction.

BACKGROUND: Prolonged ischemia and myocardial infarction are followed by a series of dynamic processes that determine the fate of the affected myocardium toward recovery or necrosis. Metabolic adaptions are considered to play a vital role in the recovery of salvageable myocardium in the context of stunned and hibernating myocardium. OBJECTIVES: The potential of hyperpolarized pyruvate cardiac magnetic resonance (CMR) alongside functional and parametric CMR as a tool to study the complex metabolic-structural interplay in a longitudinal study of chronic myocardial infarction in an experimental pig model is investigated. METHODS: Metabolic imaging using hyperpolarized [1-13C] pyruvate and proton-based CMR including cine, T1/T2 relaxometry, dynamic contrast-enhanced, and late gadolinium enhanced imaging were performed on clinical 3.0-T and 1.5-T MR systems before infarction and at 6 days and 5 and 9 weeks postinfarction in a longitudinal study design. Chronic myocardial infarction in pigs was induced using catheter-based occlusion and compared with healthy controls. RESULTS: Metabolic image data revealed temporarily elevated lactate-to-bicarbonate ratios at day 6 in the infarcted relative to remote myocardium. The temporal changes of lactate-to-bicarbonate ratios were found to correlate with changes in T2 and impaired local contractility. Assessment of pyruvate dehydrogenase flux via the hyperpolarized [13C] bicarbonate signal revealed recovery of aerobic cellular respiration in the hibernating myocardium, which correlated with recovery of local radial strain. CONCLUSIONS: This study demonstrates the potential of hyperpolarized CMR to longitudinally detect metabolic changes after cardiac infarction over days to weeks. Viable myocardium in the area at risk was identified based on restored pyruvate dehydrogenase flux.

Personalization of biomechanical simulations of the left ventricle by in-vivo cardiac DTI data: Impact of fiber interpolation methods.

Simulations of cardiac electrophysiology and mechanics have been reported to be sensitive to the microstructural anisotropy of the myocardium. Consequently, a personalized representation of cardiac microstructure is a crucial component of accurate, personalized cardiac biomechanical models. In-vivo cardiac Diffusion Tensor Imaging (cDTI) is a non-invasive magnetic resonance imaging technique capable of probing the heart's microstructure. Being a rather novel technique, issues such as low resolution, signal-to noise ratio, and spatial coverage are currently limiting factors. We outline four interpolation techniques with varying degrees of data fidelity, different amounts of smoothing strength, and varying representation error to bridge the gap between the sparse in-vivo data and the model, requiring a 3D representation of microstructure across the myocardium. We provide a workflow to incorporate in-vivo myofiber orientation into a left ventricular model and demonstrate that personalized modelling based on fiber orientations from in-vivo cDTI data is feasible. The interpolation error is correlated with a trend in personalized parameters and simulated physiological parameters, strains, and ventricular twist. This trend in simulation results is consistent across material parameter settings and therefore corresponds to a bias introduced by the interpolation method. This study suggests that using a tensor interpolation approach to personalize microstructure with in-vivo cDTI data, reduces the fiber uncertainty and thereby the bias in the simulation results.

Quantification of left ventricular strain and torsion by joint analysis of 3D tagging and cine MR images.

Cardiovascular magnetic resonance (CMR) imaging is the gold standard for the non-invasive assessment of left-ventricular (LV) function. Prognostic value of deformation metrics extracted directly from regular SSFP CMR images has been shown by numerous studies in the clinical setting, but with some limitations to detect torsion of the myocardium. Tagged CMR introduces trackable features in the myocardium that allow for the assessment of local myocardial deformation, including torsion; it is, however, limited in the quantification of radial strain, which is a decisive metric for assessing the contractility of the heart. In order to improve SSFP-only and tagged-only approaches, we propose to combine the advantages of both image types by fusing global shape motion obtained from SSFP images with the local deformation obtained from tagged images. To this end, tracking is first performed on SSFP images, and subsequently, the resulting motion is utilized to mask and track tagged data. Our implementation is based on a recent finite element-based motion tracking tool with mechanical regularization. Joint SSFP and tagged images registration performance is assessed based on deformation metrics including LV strain and twist using human and in-house porcine datasets. Results show that joint analysis of SSFP and 3DTAG images provides better quantification of LV strain and twist as either data source alone.