Influence of different pre-treatments on the resin infiltration depth into enamel of teeth affected by molar-incisor hypomineralization (MIH).

OBJECTIVES: This in vitro pilot study aimed to evaluate whether different pre-treatments (demineralization, deproteinization, (chemo-)mechanical reduction of the surface layer) influence the penetration depth of a resin infiltrant into MIH-affected enamel compared to initial carious lesions. METHODS: Thirty extracted human permanent molars with non-cavitated initial carious lesions (n = 5) or MIH (n = 25) were chosen and randomly assigned to six experimental groups: IC: initial caries; M: MIH; MN: MIH, 5.25% sodium hypochlorite; MM: MIH, microabrasion; MA: MIH, air abrasion; MAN: MIH, air abrasion and 5.25% sodium hypochlorite. A modified indirect dual fluorescence staining method was adopted to assess the penetration depth (PD) of the resin infiltrant and the lesion depth (LD) by confocal laser scanning microscopy (CLSM). Exemplarily, scanning electron microscopic (SEM) images were captured. The relationship between group assignment and penetration/lesion depth was estimated using a linear mixed model incorporating the tooth as random effect (two observations/tooth). The significance level was set at p < 0.05. RESULTS: For MIH-affected molars, the mean PD (in µm; median, [minimum-maximum]) were M (178.2 [32.5-748.9]), MN (275.6 [105.3-1131.0]), MM (48.7 [0.0-334.4]), MA (287.7 [239.4-491.7]), and MAN (245.4 [76.1-313.5]). Despite the observed differences in PD between the groups, these could not be statistically verified (Bonferroni, p = 0.322). The percentage penetration was significantly higher for IC than for MIH groups (Bonferroni, p < 0.05). SIGNIFICANCE: Compared to IC, resin infiltration into MIH-affected enamel ist more variable. Different pre-treatments influence the resin penetration into developmentally hypomineralized enamel to a fluctuating level.

Occlusal Caries Detection with Intraoral Scanners in Pediatric Dentistry: A Comparative Clinical Study.

Background: The aim of this clinical study was to compare the occlusal caries detection (OCD) performance of the intraoral scanners (IOSs) Trios 4 (TIO, 3Shape) and Emerald S (EME, Planmeca) and the Diagnocam (DIA, KaVo) with the established visual (WHO) examination (VIS, reference method). Methods: Between 08/2022 and 02/2023, 60 children (mean age 9.6 ± 2.5 years) were examined as part of their regular dental checkups. OCD was performed at the tooth level, separately for primary and permanent unrestored teeth. Furthermore, two thresholds were analyzed: sound versus overall caries (pooled data of enamel and dentin caries, TH1) and pooled data of sound and enamel caries versus dentin caries (TH2). Results: The best agreement with the reference method (reliability) in both dentitions was obtained for DIA (ĸ = 0.829/ĸ = 0.846; primary/permanent teeth), followed by EME (ĸ = 0.827/ĸ = 0.837) and TIO (ĸ = 0.714/ĸ = 0.680). Similar results were shown for the diagnostic quality (sensitivity, specificity and area under the curve of the receiver operating characteristic curve), with higher values for TH1 than for TH2. Both IOSs and the DIA showed worse results than the reference method VIS. Conclusions: Currently, IOS should be used as an additional caries detection tool, especially for visualization, and cannot be recommended as a basic tool for diagnosis or invasive/noninvasive therapy decisions in OCD.

Improving the Communication of Dental Findings in Pediatric Dentistry by Using Intraoral Scans as a Visual Aid: A Randomized Clinical Trial.

The aim of this first randomized clinical trial (RCT) was to determine whether intraoral scans (IOS) can be used as a visual aid to improve the communication of dental findings in pediatric dentistry. Therefore, 60 children (mean age 10.1 ± 3.3 years) and their accompanying parents/primary caregivers were examined between July 2022 and February 2023. Patients were randomly allocated to two groups: half of the participants were informed of the children's dental findings including treatment plans by verbal explanation alone (control group, n = 30), while the other half were informed using IOS (Trios 4, 3Shape) as a visual aid to support the verbal explanation (study group, n = 30). Both groups then completed a questionnaire regarding their children's diagnosis, treatment needs, planned therapy, and oral hygiene. Statistical analysis was performed using a t-test (p < 0.05). Overall, there was a significant difference between the two groups (p < 0.001) in terms of understanding the current oral situation of their children. While 85.5 ± 17.3% (mean ± standard deviation) of the answers were correct in the study group, only 57.2 ± 17.8% of the participants in the control group were capable of answering the questions correctly. In particular, the control group had difficulties answering the questions about treatment needs and therapy correctly. Within the limitations of this first pilot study, IOS can be clearly recommended as a visual aid to improve the communication of dental findings with PGs in pediatric dentistry.

Evaluation of Mechanical Versus Manual Root Canal Preparation in Primary Molars-A Comparative In Vitro Study.

The endodontic treatment of primary teeth is to maintain the function of the tooth free of symptoms until its physiological exfoliation. A critical factor for success is how quickly and effectively the root canal preparation can be performed. Therefore, the aim of this comparative in vitro study was to analyze the efficiency of two mechanical root canal preparation systems FM (FlexMaster) and HF (HyFlex EDM) to manual KF (K-file) on extracted primary molars. A total of 45 teeth were divided into three groups (n = 15): KF (#15-35), FM (04#30) and HF (25/~ OneFile). Root canal preparation was performed, and the preparation time was measured. All root canals were non-destructively analyzed by micro-computed tomography in the cervical, middle and apical thirds before and after preparation with regard to the parameters of canal transport (in µm) and centering ratio (0-1). Statistical analysis was performed at a 5% significance level using non-parametric tests. HF caused the lowest canal transport in the apical third (p = 0.008). The centering ratio value of HF was significantly higher in the middle third of the root canals than in the other two groups (p < 0.01). The mean instrumentation time was significantly higher for KF (6.67 min) than for FM (4.69 min) and HF (4.03 min, p < 0.01). HF can be recommended for primary molar root canal treatment.

The Bacterial Oral Microbiome in Children with Congenital Heart Disease: An Extensive Review.

Children with congenital heart disease have poorer oral health compared with healthy children. Oral diseases, such as dental caries and gingivitis, are associated with the oral microbiome. The objective of this review was to find evidence of differences in the bacterial colonization of the oral cavity of children with congenital heart disease (CHD) versus healthy children. A literature review was conducted according to predetermined criteria, including the need for controlled clinical trials. Half of the 14 studies that met the inclusion criteria reported significant differences in bacterial colonization in children with congenital heart disease. A variety of influencing factors were discussed. There is some evidence for alterations in the oral microflora as a result of physiopathological and treatment-related factors in children with CHD, but additional research is required to validate these findings.

Dentin Bonding Performance of Universal Adhesives in Primary Teeth In Vitro.

(1) Background: The aim of this in vitro study was to evaluate the micro-tensile bond strength (µ-TBS) of universal adhesives to primary tooth dentin after different storage periods. (2) Methods: Dentin of 100 extracted primary molars was exposed. Dentin surfaces were bonded with six universal adhesives (Adhese®Universal [AU], All-Bond Universal® [ABU], G-Premio Bond [GPB], iBond®Universal [IBU], Prime&Bond active™ [PBa], and Prime&Bond®NT as control [PBN]) and restored with a resin composite build-up (Filtek™ Z250). After 24 h, 6 months, and 12 months of water storage, specimens were cut into sticks, and µ-TBS was measured and analyzed using one-way ANOVA (p < 0.05) for normal distributions and the Mann-Whitney U-test (p < 0.05) for non-normal distribution. Pretesting failures were recorded as 0 MPa. Fracture modes were analyzed under a fluorescence microscope; interfaces were visualized with SEM/TEM. (3) Results: Compared with the reference group (PBN: 32.5/31.2 MPa after 6/12 months), two adhesives showed a significantly higher bond strength after 6 months (AU: 44.1 MPa, ABU: 40.9 MPa; p < 0.05) and one adhesive after 12 months (AU: 42.9 MPa, p < 0.05). GPB revealed significantly lower bond strengths in all storage groups (16.9/15.5/10.9 MPa after 24 h/6 months/12 months; p < 0.05). AU and IBU did not suffer pre-test-failures [PTF]. (4) Conclusions: After 12 months, PBN, IBU, AU, and GPB showed significantly lower results compared ithw initial µ-TBS, whereas AU revealed the highest µ-TBS and no PTF.

Update of students' and lecturers' perspectives on online learning in dental education after a five-semester experience due to the SARS-CoV-2 (COVID-19) pandemic: insights for future curriculum reform.

BACKGROUND: The coronavirus disease (COVID-19) pandemic has accelerated digital transformation in dental education, resulting in a shift from face-to-face teaching to online learning. While online learning could be a common strategy in various fields, the challenge for dental education is that it depends on the requirements of clinical experience to achieve competence in performing the dental treatment. This cross-sectional study aimed to analyse students' and lecturers' perceptions towards online learning after five semesters of experience using a questionnaire survey. METHODS: Since the spring term of 2020, the theoretical part of the curriculum has been conducted in the form of online learning using a combination of synchronous and asynchronous formats. In the following semesters, more theoretical content was shifted back from online learning to face-to-face courses. Preclinical and clinical students enrolled in the dental curriculum during the spring term 2022 semester and all lecturers with at least one year of teaching experience in face-to-face and online learning formats were asked to fill out an online questionnaire regarding the aspects of handling, didactic benefit, motivation, and overall assessment. RESULTS: Students and lecturers rated the implementation of online learning as mostly positive, but pointed out that established 'face-to-face' learning could not be replaced. Moreover, the students reported personal benefits in terms of daily planning. Lecturers also benefitted as their experience increased in online teaching. For future curriculum, students demanded 49.5% (25.1) ((mean (standard deviation) of theoretical part in terms of online learning), while lecturers demanded only 34.1% (24.1). CONCLUSIONS: Despite having no prior need for online learning, students and lecturers showed a positive perspective on online learning which should be considered in the implementation and planning of future dental education. However, in terms of practical training, it cannot replace face-to-face education in dentistry.

A comparative retrospective study on the prevalence and therapeutic treatment of dental agenesis between healthy children and children with systemic disease or congenital malformation.

BACKGROUND: Dental agenesis (DA) in the permanent dentition is one of the most common dental anomalies, with a prevalence up to 2-10%. Therefore, the aim of this retrospective study was to investigate the prevalence and therapeutic treatment of DA in healthy children (HC) compared to children with systemic disease or congenital malformation (SD/CM). METHODS: Out of 3407 patients treated at the Department of Paediatric Dentistry of the Justus Liebig University Giessen (Germany) between January 2015 and December 2020, a total of 1067 patients (594 female, 473 male) aged between 4.5 and 18 years were included in this study due to DA. Besides the patients' general medical history and therapeutic treatments, panoramic radiographs were analysed. RESULTS: In contrast to the HC group with 9.7% DA, the SD/CM group showed a significantly higher prevalence of DA (19.8%; p < 0.05). The latter group was further classified into children with ectodermal dysplasia (4.4%), down syndrome (8.2%), cleft lip and palate (4.4%), intellectual disability/developmental delay (16.4%), and other genetic/organic diseases without intellectual disability (45.9%). Regarding therapeutic treatments, the HC group (59.5%) was significantly more often treated with an orthodontic gap opening compared to the SD/CM group (42.6%; p < 0.05), followed by orthodontic gap closing 36.5% in the HC group and 22.9% in the SD/CM group (p < 0.05), whereas no treatment was predominantly performed in the SD/CM group (37.7%) compared to the HC group (4%; p < 0.05). Furthermore, 50% in the SD/CM group required general anaesthesia for therapeutic treatment (vs. 8.1% in the HC group; p < 0.05). CONCLUSIONS: Children with SD/CM suffered more often from DA compared to HC that underlines multi- and interdisciplinary treatment of utmost importance. Furthermore, due to intellectual disability, common treatment methods can be complicated by insufficient compliance. This fact underlines the importance of an early attempt to establish the necessary cooperation enabling children with SD/CM to receive therapy.

Marginal Quality and Wear of Bulk-fill Materials for Class-II Restorations in Primary Molars.

PURPOSE: The aim of this in-vitro study was to evaluate the marginal integrity and wear of eight bulk-fill materials in comparison to a compomer in Class-II cavities in primary molars after thermomechanical loading (TML). MATERIALS AND METHODS: Prepared Class-II cavities in 72 extracted primary molars were filled with eight bulk-fill materials. A compomer served as the control group. After water storage (incubator, 28 days, 37°C), samples were subjected to TML (2500 thermal cycles 5°C/55°C; 100,000 load cycles, 50 N, 1.67 Hz). Before and after TML, replicas were made which were used for both SEM analysis of marginal integrity and 3-D wear analysis. Statistical analysis was performed using Kruskal-Wallis and Wilcoxon tests (p < 0.05). RESULTS: A significant reduction in perfect margins was observed for all groups, while marginal gap formation increased (Wilcoxon test, p < 0.02) for all groups but the compomer. Significant interindividual differences were observed between the tested materials regarding marginal integrity (Kruskal-Wallis test, p < 0.05). Wear analysis revealed no significant differences between groups (Kruskal-Wallis test, p > 0.05). CONCLUSION: Some of the bulk-fill materials investigated here achieved better results than the compomer and should be further evaluated clinically.

Developmental enamel defects and their relationship with caries in adolescents aged 18 years.

Randomly selected 1,611 individuals aged 18 years formed a nationally representative sample from all provinces of Poland. Developmental defects of the enamel (DDE) and caries were assessed using the modified DDE index, molar incisor hypomineralisation (MIH) Treatment Need Index (MIH-TNI), FDI and WHO criteria by 22 trained and calibrated dentists. T-test was used for comparing group means. A simple and multiple logistic regression tests were used to assess the relationship between DDE and caries severity expressed as DMFT (p < 0.05). The prevalence of DDE was 13.7%. Demarcated opacities (DEO) were the most frequent (9.65%); 4% had diffuse opacities (DIO) and 1.5% had hypoplasia. MIH was diagnosed in 0.6% patients. The prevalence of caries was 93.2%, with mean DMFT of 6.50 ± 4.22. The DMFT value was 7.52 ± 4.77 in the group of patients with demarcated opacities (DEO); 7.85 ± 4.74 with diffuse opacities (DIO) and 7.56 ± 4.57 with enamel hypoplasia, respectively. There was a significant relationship between caries severity and DDE (p < 0.001), DEO (p = 0.001) and DIO (p = 0.038), and between DDE and DMFT index (p < 0.001). The results obtained in the study proved the significant relationship between DDE and DMFT in 18-year-olds, the assessment of which was the aim of the study.

Effect of Chlorhexidine-containing Etch-and-Rinse Adhesives on Dentin Microtensile Bond Strength after Biological Loading.

PURPOSE: This study compared a 2%-CHX dentin pre-treatment with three CHX adhesives (experimentally admixed 0.1% CHX in primer or bonding agent, or industrially added 0.2% CHX in universal adhesive) by evaluating dentin bond strengths after biological loading in a fully automated artificial mouth model. MATERIALS AND METHODS: The occlusal dentin of 50 freshly extracted human third molars was exposed, and the teeth were randomly assigned to 5 groups according to the adhesive protocol (n = 10): 1. control, Scotchbond Multipurpose (3M Oral Care; CTRL); 2. 2% CHX dentin pre-treatment (DENT); 3. 0.1% CHX experimentally admixed into the primer (PRIM); 4. 0.1% CHX experimentally admixed into the bonding agent (BOND); 5. Peak Universal Bond containing 0.2% CHX (Ultradent; PEAK). The teeth were restored with composite resin. Microtensile bond strength testing (bonding area 0.46 mm2 ± 0.04 mm2, crosshead speed 1 mm/min) was performed after 24-h storage in distilled water (baseline) or after 2-day biological loading with S. mutans (demineralization 1 h / remineralization 5 h). The mode of fracture was recorded and exemplary sticks were evaluated under SEM. RESULTS: CTRL exhibited significantly higher µTBS at baseline in comparison to PRIM (p = 0.000), BOND (p = 0.002), and PEAK (p = 0.000). After undergoing the caries model, CTRL demonstrated significantly lower µTBS compared to DENT (p = 0.000), PRIM (p = 0.008), and PEAK (p = 0.000). The same behavior was observed for BOND vs DENT (p = 0.000), PRIM (p = 0.003), and PEAK (p = 0.001). After biological loading, DENT (p = 0.041), PRIM (p = 0.000), and BOND (p = 0.000) exhibited significantly fewer adhesive fractures than CTRL. CONCLUSIONS: CHX addition to the primer protects dentin bond strength from declining after biological loading. Thus, it may offer some clinical advantage in terms of secondary caries inhibition around composite restorations. However, since loss of adhesion at baseline was less when 2% CHX was used as a dentin pre-treatment, it can be suggested as a safer option. so that bonding is not undermined by potential chemical interactions from CHX with the adhesives.

A cross-sectional survey on knowledge and attitudes of Greek dentists regarding molar incisor hypomineralisation diagnosis and treatment.

BACKGROUND: Molar Incisor Hypomineralisation (MIH) remains a challenge for clinicians underlining the gap in the literature regarding the condition. The study aimed to record knowledge and attitudes of Greek dentists regarding diagnosis and treatment of MIH and correlate findings with non-dental characteristics. METHODS: It is a cross-sectional study based on a questionnaire consisting of 37 multiple-choice questions. Data regarding diagnosis, aetiopathogenesis, and clinical management of MIH were collected from active members of three Greek Dental Associations. Chi-square and student's t-test were used to correlate responses with practitioners' characteristics and odds ratios calculated to evaluate differences on treatment of MIH-affected teeth (p < 0.05). RESULTS: From the 360 participants (response rate = 94%), 185 were general dental practitioners (GDPs) and 175 dental specialists (59 paediatric dentists (PDs), 38 orthodontists and 78 of other specialties).MIH was commonly encountered as a clinical problem, with GDPs reporting genetics and fluoride intake as common aetiological factors at significantly higher percentages as compared to PDs (p < 0.05). Permanent molars and incisors (44%) were the teeth most commonly affected, with yellow/brown demarcated opacities (68%) the most common clinical feature with PDs reporting them in a significantly higher percentage (p < 0.05). Dentists with specialisation, dentists that treat > 10 children per week and children with MIH-affected teeth had a 2-5.5 times greater probability to report difficulty achieving sufficient anaesthesia and hypersensitivity problems (p < 0.001). Agreement between GDPs' and dental specialists' views was found on less invasive treatment of anterior lesions. Non-PDs reported bulk-fill restorations and onlays as the ideal treatment of severely-affected posterior teeth, as compared to PDs that preferred preformed metal crowns (p < 0.05). Multivariate logistic regression analysis revealed that the age of the clinician, years of experience and number of children treated per week were the factors significantly associated with the decision for the treatment of only severely-affected posterior MIH teeth. CONCLUSIONS: Most participants had encountered MIH-affected teeth in their clinical practice and were able to recognize main aetiological factors and clinical findings related to the condition. Nevertheless, their knowledge regarding treatment is limited.

Damping Behaviour and Mechanical Properties of Restorative Materials for Primary Teeth.

The energy dissipation capacity and damping ability of restorative materials used to restore deciduous teeth were assessed compared to common mechanical properties. Mechanical properties (flexural strength, modulus of elasticity, modulus of toughness) for Compoglass F, Dyract eXtra, SDR flow, Tetric Evo Ceram, Tetric Evo Ceram Bulk Fill, and Venus Diamond were determined using a 4-point bending test. Vickers hardness and Martens hardness, together with its plastic index (ηITdis), were recorded using instrumented indentation testing. Leeb hardness (HLD) and its deduced energy dissipation data (HLDdis) were likewise determined. The reliability of materials was assessed using Weibull analysis. For common mechanical properties, Venus Diamond always exhibited the significantly highest results and SDR flow the lowest, except for flexural strength. Independently determined damping parameters (modulus of toughness, HLDdis, ηITdis) invariably disclosed the highest values for SDR flow. Composite materials, including SDR flow, showed markedly higher reliabilities (Weibull modulus) than Compoglass F and Dyract eXtra. SDR flow showed pronounced energy dissipation and damping characteristics, making it the most promising material for a biomimetic restoration of viscoelastic dentin structures in deciduous teeth. Future developments in composite technology should implement improved resin structures that facilitate damping effects in artificial restorative materials.

Clinical Effectiveness of Restorative Materials for the Restoration of Carious Primary Teeth: An Umbrella Review.

Since untreated dental caries remain a worldwide burden, this umbrella review aimed to assess the quality of evidence on the clinical effectiveness of different restorative materials for the treatment of carious primary teeth. A literature search in electronic bibliographic databases was performed to find systematic reviews with at least two-arm comparisons between restorative materials and a follow-up period ≥12 months. Reviews retrieved were screened; those eligible were selected, and the degree of overlap was calculated using the 'corrected covered area' (CCA). Data were extracted and the risk of bias was assessed using the ROBIS tool. Fourteen systematic reviews with a moderate overlap (6% CCA) were included. All materials studied performed similarly and were equally efficient for the restoration of carious primary teeth. Amalgam and resin composite had the lowest mean failure rate at 24 months while high-viscosity and metal-reinforced glass ionomer cements had the highest. At 36 months, high-viscosity glass ionomer cements showed the highest failure rate with compomer showing the lowest. Most reviews had an unclear risk of bias. Within the limitations of the review, all materials have acceptable mean failure rates and could be recommended for the restoration of carious primary teeth.

Fourteen years clinical evaluation of leucite-reinforced ceramic inlays luted using two different adhesion strategies.

OBJECTIVES: Aim of the present prospective study was to clinically evaluate the long-term performance of two different luting-materials for leucite-reinforced glass-ceramic inlays/onlays after 14 years. METHODS: A total of 83 IPS-Empress-inlays/onlays were placed in 30 patients. Restorations were luted according to two different strategies: 43 restorations were fixed with a self-adhesive resin-cement (RelyXUnicem, RX), 40 restorations were inserted with VariolinkII-low (SV) after pretreatment with an etch-and-rinse multi-step adhesive. Recalls were performed after two weeks (n=83), two years (n= 82), four years (n=74) and 14 years (n=54). Two independent calibrated examiners evaluated all restorations using modified USPHS-criteria. Statistical analysis was performed using pairwise Mann-Whitney-U-test and Friedman-test (p < 0.05). RESULTS: After 14 years, 54 restorations in 22 patients were evaluated (eight patients equalling 29 inlays not available). Ten restorations had to be replaced (failure rate 12%); four (SV-group) showed bulk fractures and two (RX-group) exhibited marginal fractures at the 14-year recall. Overall, the SV-group revealed significantly better results regarding discoloration of the luting gap (p<0.05) compared to the RX-group. No statistically significant differences were computed between SV and RX for the remaining criteria at the respective recalls (p>0.05). However, statistically significant deteriorations were detected for both luting procedures over 14 years regarding "colour match", "marginal integrity" and "tooth integrity" (p<0.05). CONCLUSIONS: The self-adhesive resin-cement RelyXUnicem showed similar clinical performance to a conventional multi-step luting-procedure after 14 years for most of the test parameters with a slightly inferior performance of RelyXUnicem regarding discoloration of the luting gap. CLINICAL SIGNIFICANCE: The current study presents unique in-vivo long-term data on two adhesion-strategies for indirect ceramic single-tooth restorations. Differences in performance of the two luting methods after being challenged for 14 years in the oral environment are highlighted. However, the overarching survival rate justifies the recommendation of both methods for clinical routine.

Caries Experience and Increment in Children Attending Kindergartens with an Early Childhood Caries Preventive Program Compared to Basic Prophylaxis Measures-A Retrospective Cohort Study.

Dental caries constitutes a public health challenge. As preventive strategies are desirable, this retrospective cohort study aimed to assess the caries experience and increment in children attending kindergartens with an early childhood caries (ECC) preventive program (intervention group, IG) compared to basic prophylaxis measures (control group, CG) located in areas of different socioeconomic status (SES) within Marburg (Germany). The long-term caries experience (2009−2019) of these 3−5-year-old kindergarten children was evaluated. For the caries increment, dental records of 2019 were screened for the availability of a minimum of two dental examinations at least 8 months apart. Caries was scored according to the WHO criteria (dmf−t). The data were split by observation period (300−550 and >550 days). Overall, 135 children (Ø 3.7 years) attended IG, and 132 children (Ø 3.6 years) attended CG. After 300−550 days, no significant differences were found between both groups regarding mean caries increment and experience (p > 0.05). After >550 days, IG with low SES exhibited a high caries experience. Fluoride varnish applications could not reduce the caries increment compared to CG in the short-term but slightly decreased the long-term caries experience. Comprehensive ECC prevention measures actively involving parents are needed to overcome the caries burden.

Dental Treatment under General Anesthesia in Pre-School Children and Schoolchildren with Special Healthcare Needs: A Comparative Retrospective Study.

The aim of this retrospective study was to evaluate the dental treatments received under general anesthesia (GA) in pre-school children and school children with special healthcare needs (n = 263) compared with healthy controls (n = 62). In order to analyze the impact of pre-existing cofactors on oral health, children were divided into the following groups: heart disease, cancer, syndromic disease, and other diseases as well as in- and outpatient healthy children. Caries experience (dmf-t/DMF-T) before GA (impulse 1), waiting time, and dental treatment under GA (impulse 2) were determined. Pre-school children showed a higher caries experience (mean ± standard deviation; 8.3 ± 4.8) compared to schoolchildren (6.9 ± 4.3). Predominantly, early childhood caries (ECC) of type 1 were detected. From all groups with special healthcare needs, children with cancer revealed the highest Significant Caries Index (17.0 ± 2.0), followed by other diseases (14.6 ± 2.6), syndromic disease (14.3 ± 1.8), and heart disease (13.8 ± 2.7). Overall, 2607 dental procedures were performed under GA with a mean of 8.0 ± 6.5 dental measures per child. Within the limitations of this study, the data exhibited independent of pre-existing cofactors and age high caries risk in all patient groups showing a high need for treatment.

New Caries Diagnostic Tools in Intraoral Scanners: A Comparative In Vitro Study to Established Methods in Permanent and Primary Teeth.

The aim of this in vitro study was to systematically investigate new caries diagnostic tools, including three intraoral scanners, and compare them to established diagnostic methods. For a standardized analysis of occlusal and proximal caries lesions, human permanent and primary teeth (n = 64) were embedded in models and investigated in a phantom head using six different caries diagnostic methods: visual examination, bitewing radiography, Diagnocam (KaVo, Biberach, Germany), Trios 4 (3Shape, Copenhagen, Denmark), iTero Element 5D (Align Technology, San José, CA, USA), and Planmeca Emerald S (Planmeca, Helsinki, Finland). The diagnostic methods were investigated and compared to reference µ-CT for permanent and primary teeth separately. For occlusal caries diagnostics in permanent teeth, the best agreement to the reference (reliability) was obtained for Planmeca Emerald S (ĸ = 0.700), whereas in primary teeth, for visual examination (ĸ = 0.927), followed by Trios 4 (ĸ = 0.579). Regarding proximal caries diagnostics, bitewing radiography, as the gold standard, exhibited the highest agreement for permanent (ĸ = 0.643) and primary teeth (ĸ = 0.871). Concerning the analysis of the diagnostic quality (sensitivity and specificity) using receiver operating characteristic (ROC) curve analysis, comparable findings were obtained for area under curve (AUC) values as for reliability. No diagnostic method could be identified that is generally suitable for occlusal and proximal lesions in both dentitions. Overall, caries diagnostics with intraoral scanners seem to be interesting tools that should be further investigated in clinical studies.

Wear and marginal quality of aesthetic crowns for primary molars.

BACKGROUND: Due to limited aesthetics of stainless-steel crowns, the demand for tooth-coloured crowns has recently risen. Few studies have investigated the marginal integrity and wear behaviour of tooth-coloured primary molar crowns under subcritical load in vitro. AIM: This in vitro study evaluated the marginal quality and wear of newly introduced resin composite and hybrid ceramic crowns compared with metal and zirconia crowns. DESIGN: Metal, resin composite, hybrid ceramic (CAD/CAM), and various zirconia crowns were investigated. After thermomechanical loading (2,500 thermocycles/100,000 × 50N), marginal quality of luting gaps and wear of crowns/antagonists were evaluated using replicas under a light or 3D laser scanning microscope. Results were analysed with the Mann-Whitney U test or one-way ANOVA (p < .05). RESULTS: Marginal quality of the new resin composite and hybrid ceramic crowns performed well in comparison with SSC and zirconia crowns. Adhesive bonding of crowns resulted in superior marginal seal compared with conventional GIC (Mann-Whitney U test, p < .05). Regarding wear, zirconia crowns exhibited significantly worse results than resin composite or hybrid ceramic crowns and SSCs (ANOVA, p < 0.05). CONCLUSION: The new resin composite and hybrid ceramic crown exhibited good performance in comparison with SSCs and zirconia crowns considering both wear and marginal quality after subcritical loading.