Electrically Induced Structural Transformations of a Chiral Nematic under Tangential-Conical Boundary Conditions.

In this study, structural transformations induced by an electric field in the chiral nematic under tangential-conical boundary conditions have been considered. The composition influence of the orienting polymer films on the director tilt angles, the formation of orientational structures in the LC layer, as well as the electro-optical response and relaxation processes have been studied. It has been shown that the poly(tert-butyl methacrylate) concentration change in the orienting polymer mixture allows for smoothly controlling the director tilt angle without fixing its azimuthal orientation rigidly.

Effect of elastic constants on electrically induced transition in twisted radial cholesteric droplets.

In this work, we investigated the behavior of cholesteric droplets with homeotropic boundary conditions experimentally and by computer simulations. Small droplets forming twisted radial structures were studied. We obtained two different paths of structural transformations under electric field in such droplets. The choice between these paths has probabilistic nature. The ratio between the two transition types was found to be sensitive to the elastic constants of LC forming the droplet. We suggest the principal approach for in situ estimation of ratios between elastic constants in cholesteric LCs deposited in polymer-dispersed LC material and discuss its strong and weak sides.

Polymer-Dispersed Cholesteric Liquid Crystal under Homeotropic Anchoring: Electrically Induced Structures with λ1/2-Disclination.

Orientational structures of polymer-dispersed cholesteric liquid crystal under homeotropic anchoring and their transformations under the action of an electric field are studied. The switching of cholesteric droplets between different topological states are experimentally and theoretically demonstrated. Structures with λ+1/2-disclination are found and considered. These structures are formed during the transformation of a twisted toroidal configuration induced by a decrease in the electric field when a relative chiral parameter N0>6.3. The transformation of the initial structure with a bipolar distribution of the helix axis into a twisted toroidal configuration and then into a structure with λ+1/2-disclination is investigated in detail. The behavior of these structures under the influence of an external electric field, as well as the appearance of structures with λ−1/2-disclination, are studied. Obtained results are promising for the development of optical materials with programmable properties.

Oblique light incidence method to study topological defects in nematic layers with conical boundary conditions.

A polarization microscopy method to investigate the orientational structures and boojums formed in the chiral and achiral nematic layers under conical (tilted) boundary conditions has been developed. Oblique light incidence on nematic layer is used, due to which the phase difference between the ordinary and extraordinary waves depends on the director's azimuthal angle. The phase difference gets maximal when the director azimuthal angle of achiral nematic [Formula: see text] and an azimuthal angle at the center of the chiral nematic layer [Formula: see text] independently of the total twist angle [Formula: see text]. It has been found that the [Formula: see text] boojums with the phase [Formula: see text] and [Formula: see text] are formed in achiral and chiral nematics, respectively, at the director tilt angle [Formula: see text] at the interface. In addition, the defectless structure of chiral nematic with the periodically variable azimuthal director angle on the substrates has been studied.

Nematic Structures under Conical Anchoring at Various Director Tilt Angles Specified by Polymethacrylate Compositions.

Dependence of the director tilt angle of nematic liquid crystal (LC) under conical anchoring from the two-component polymer mixture composition has been studied. We varied the ratio of poly(isobutyl methacrylate) (PiBMA), which specifies a conical anchoring for the nematic liquid crystal LN-396, and poly(methylmethacrylate) (PMMA) assigning a tangential alignment for the same nematic. An oblique incidence light technique to determine a tilt angle has been used. It has been shown that the tilt angle increases from 0∘ to 47.7∘ when PiBMA:PMMA ratio changes in the range 30:70 to 100:0. The specific optical textures viewed under the polarizing microscope and proper orientational structures have been considered for various compositions of the polymer films. An electric field action on the formed orientational structures has been investigated. The obtained results are promising for the application in various electro-optical LC devices with a conical anchoring in which the director tilt angle is a crucial parameter: a controlled diffraction gratings, an electrically operated achromatic rotators of linear light polarization, etc.

Polymer Dispersed Cholesteric Liquid Crystals With a Toroidal Director Configuration under an Electric Field.

The electro-optical properties of polymer dispersed liquid crystal (PDLC) films are highly dependent on the features of the contained liquid crystal (LC) droplets. Cholesteric LC droplets with homeotropic boundaries can form several topologically different orientational structures, including ones with single and more point defects, layer-like, and axisymmetric twisted toroidal structures. These structures are very sensitive to an applied electric field. In this work, we have demonstrated experimentally and by computer simulations that twisted toroidal droplets reveal strong structural response to the electric field. In turn, this leads to vivid changes in the optical texture in crossed polarizers. The response of droplets of different sizes were found to be equivalent in terms of dimensionless parameters. In addition, the explanation of this phenomenon showed a comparison of theoretical and experimental structural response curves aids to determine the shape of the droplet. Finally, we demonstrated that the addition of a dichroic dye allows such films to be used as optical filters with adjustable color even without polarizers.

Optical Textures and Orientational Structures in Cholesteric Droplets with Conical Boundary Conditions.

Cholesteric droplets dispersed in polymer with conical boundary conditions have been studied. The director configurations are identified by the polarising microscopy technique. The axisymmetric twisted axial-bipolar configuration with the surface circular defect at the droplet's equator is formed at the relative chirality parameter N 0 ≤ 2.9 . The intermediate director configuration with the deformed circular defect is realised at 2.9 < N 0 < 3.95 , and the layer-like structure with the twisted surface defect loop is observed at N 0 ≥ 3.95 . The cholesteric layers in the layer-like structure are slightly distorted although the cholesteric helix is untwisted.

Electrically induced transformations of defects in cholesteric layer with tangential-conical boundary conditions.

Electric-field-induced changes of the orientational structures of cholesteric liquid crystal layer with the tangential-conical boundary conditions have been investigated. The samples with the ratio of the cholesteric layer thickness d to the helix pitch p equalled to 0.57 have been considered. The perpendicularly applied electric field causes a decrease of the azimuthal director angle at the substrate with the conical surface anchoring. In the cells with d = 22 µm, the defect loops having the under-twisted and over-twisted areas are formed. At the defect loop the pair of point peculiarities is observed where the 180° jump of azimuthal angle of the director occurs. Under the action of electric field the loops shrink and disappear. In the cells with d = 13 µm, the over-twisted and under-twisted defect lines are formed. Applied voltage results in the shortening of lines or/and their transformation into a defect of the third type. The director field distribution near defect lines of three types has been investigated by the polarising microscopy techniques. It has been revealed that the length ratio between the over-twisted and third-type defect lines can be controlled by the electric field.

Orientational structures in cholesteric droplets with homeotropic surface anchoring.

The dependency of orientational structures in cholesteric droplets with homeotropic surface anchoring on the helicity parameter has been studied by experiment and simulations. We have observed a sequence of structures, in which the director configurations and topological defects were identified by comparison of polarized microscopy pictures with simulated textures. A toron-like and low-symmetry intermediate layer-like structures have been revealed and studied in detail. The ranges of stability of the observed structures have been summarized in a general diagram and explained by the helicity parameter dependence of the free energy terms.

Bipolar configuration with twisted loop defect in chiral nematic droplets under homeotropic surface anchoring.

Optical textures and appropriate orientational structures have been studied within droplets of chiral nematic dispersed in polymer assigning the homeotropic anchoring. The helix axis of the chiral structure inside droplets forms the bipolar configuration. The optical droplet textures were analysed in the unpolarised light, analyser switching-off scheme and in crossed polarisers. The twisted loop defect reveals itself convincingly in all schemes. Its appearance at the optical patterns of the chiral nematic droplets has been examined depending on their size and the aspect direction. The existence of the defect has been verified by the structural and optical calculations. The effect of an electric field on both the defect line shape and the orientational structure of chiral nematic has been studied.

Polarization exchange of optical eigenmode pair in twisted-nematic Fabry-Pérot resonator.

The polarization exchange effect in a twisted-nematic Fabry-Pérot resonator is experimentally confirmed in the regimes of both uniform and electric-field-deformed twisted structures. The polarization of output light in the transmission peaks is shown to be linear rather than elliptical. The polarization deflection from the nematic director grows from 0^{∘} to 90^{∘} angle and exchanges the longitudinal and transverse directions. Untwisting of a nematic by a voltage leads to the rotation of the polarization plane of light passing through the resonator. The polarization exchange effect allows using the investigated resonator as a spectral-selective linear polarizer with the voltage-controlled rotation of the polarization plane.