[Black knee-ochronotic alterations in alkaptonuria]. / Das schwarze Knie ­ ochronotische Veränderungen im Rahmen einer Alkaptonurie.

This article presents the case of a 53-year-old male patient born in Sri Lanka, who presented to the outpatient unit with the suspicion of empyema of the knee joint. Within the framework of knee arthroscopy, the diagnosis of ochronosis was made and later confirmed by histopathological biopsy. The alkaptonuria is caused by a homogentisate 1,2-dioxygenase deficiency and leads to an accumulation of homogentisic acid, a degradation product of tyrosine. This leads to the characteristic appearance of ochronosis with bluish-black deposits in the tissue (e.g. in connective tissue, sclera and ear cartilage) and a black coloration of the urine.

Duration of incapacity of work after tibial plateau fracture is affected by work intensity.

BACKGROUND: Tibial plateau fractures requiring surgery are severe injuries of the lower extremity. Tibial plateau fractures have an impact not only on physically demanding jobs but notably on general professional life too. The aim of this study was to assess how the professional activity of patients will be affected after a tibial plateau fracture. METHODS: 39 consecutive patients (ages 20-61 years) were retrospectively included in the study and were clinically examined at a minimum of 14 month postoperatively. Inclusion criteria were surgical treatment of tibial plateau fractures between November 2009 and December 2012. The clinical evaluation included the Lysholm score and the Oxford Knee Score. Fractures were classified and analyzed using the AO classification. Intensity of work was classified as established by the REFA Association. The patients themselves provided postoperative duration of the incapacity of work and subjective ratings. RESULTS: 17 (43.6%) women and 22 (56.4%) men were examined with a mean follow-up of 29.7 ± 10.4 months (range 14-47). According to the AO classification there were 20 (51.3%) B-type-fractures and 19 (48.7%) C-type-fractures. The median incapacity of work was 120 days (range 10-700 days) with no significant differences between B- and C-type-fractures. Four (10.3%) patients reduced their working hours by 10.5 h per week on average. Patients with low workload (REFA 0-1, median incapacity of work 90 days, range 10-390 days) had a significant shorter incapacity of work than patients with heavy workload (REFA 2-4, median incapacity of work 180 days, range 90-700 days) (p < 0.05). The median Lysholm score decreased significantly from 100 points (range 69-100) before the injury to 73 points (range 23-100) at the time of the follow-up. All patients received postoperative physiotherapy (median 25 appointments, range 6-330), with a significant higher number of appointments for C-type-fractures than for B-type-fractures (p = 0.004). CONCLUSION: A relationship was found between workload and the duration of incapacity of work after tibial plateau fractures. The post-injury shift to less demanding jobs and the reduction of working hours highlight the impact of a tibial plateau fracture on a patient's subsequent physical ability to work.

Obesity causes poorer clinical results and higher re-tear rates in rotator cuff repair.

BACKGROUND: The purpose of this retrospective study was to report on the functional outcome after both open and arthroscopic rotator cuff (RC) repair in normal weight, pre-obese and obese patients. It was hypothesized that obesity is a negative prognostic factor for clinical outcome and failure for the RC repair. METHODS: One hundred and forty-six patients who underwent either open or arthroscopic rotator cuff repair between 2006 and 2010 were included in this study. Seventy-five patients (56.7 ± 10.1 years of age) after open RC repair and 71 patients (59.0 ± 9.1 years of age) treated arthroscopically were available for evaluation. In both groups a double-row reconstruction was performed. Patients were divided in three groups according to their body-mass index. The mean follow-up was at 43 ± 16 (minimum 24) months. At follow-up, the clinical outcome was assessed by the DASH and Constant score. An ultrasound of both shoulders was performed in all patients. RESULTS: The mean BMI was 28.3 ± 5.3 in the arthroscopic group and 27.7 ± 4.3 in the open group. Overall, in both groups similar clinical results were noted [Constant-Murley score 78.3 ± 18.2 arthroscopic vs. 77.0 ± 21.8 for open surgery; DASH 12.7 ± 18.2 arthroscopic vs. 15.6 ± 21.6 for open surgery (p = 0.81)]. Both the failure rate and the clinical outcome were significantly worse for obese patients (BMI > 30, p = 0.007). The failure rate was 15.8% for the normal-weight patients, 8.2% in the pre-obese group and in the obese group 28.6%. The RC repair failure occurred in 11 cases in both groups after arthroscopic or open treatment (15.0%). CONCLUSIONS: Both the arthroscopic and the open approach showed equivalent clinical results and failure rates. Obesity (BMI > 30) causes less favorable results in the Constant and DASH scores and showed higher re-tear rates.

Coracoid graft positioning in the Latarjet procedure.

PURPOSE: The success of shoulder stabilization with the Latarjet procedure depends on the correct positioning of the coracoid graft at the glenoid. The aim of this study was to assess intra-observer reproducibility and inter-observer reproducibility of a new standardized CT scan analysis for coracoid graft positioning in the axial plane after the Latarjet procedure and to assess the positioning in the study group. METHODS: A consecutive series of 27 patients (22 men, 5 woman, 26.1 ± 6.4 years-13 right, 14 left shoulders) were followed up with CT scans between 2010 and 2012. The analysis of the CT scans (2.4 ± 0.7 months postoperatively) was performed with Osirix™ software. The assessment included two criteria in the axial plane: relation of the graft to the articular surface of the glenoid and impingement of the graft with the maximal humeral head circumference. Grafts were judged to be lateral, congruent, flush or medial. The strength of intra-observer agreement and inter-observer agreement was measured by the Kappa coefficient. RESULTS: The Kappa coefficient for intra-observer agreement was "substantial" (K = 0.64 ± 0.14, z = 4.6) to "almost perfect" (K = 0.81 ± 0.14, z = 5.7). The Kappa coefficient for inter-observer variability was "substantial" (K = 0.59 ± 0.14, z = 4.3) to "almost perfect" (K = 0.89 ± 0.14, z = 6.0). In our study, in the axial plane, 3 (11 %) transplants were lateral; 6 (22 %) transplants were congruent; 16 (60 %) flush and 2 (7 %) medial. CONCLUSION: This standardized CT scan analysis after Latarjet procedure has shown to accurately describe graft positioning in the axial plane with both good intra-observer reproducibility and inter-observer reproducibility. LEVEL OF EVIDENCE: Case series, treatment study, Level IV.

Incapacity of work after arthroscopic Bankart repair.

BACKGROUND AND INTRODUCTION: The incapacity with respect to work following anterior-inferior shoulder dislocation and subsequent Bankart repair has not been previously examined. The objective of this study was to examine a patient's incapacity according to the classification by the REFA Association. The recovery time was measured and the outcome of patients with heavy workload was compared to those with lower workloads. MATERIALS AND METHODS: A total of 74 patients who underwent isolated arthroscopic Bankart repair fulfilled the inclusion criteria. The Constant-Murley Score, UCLA Shoulder Score and ROWE Score for Shoulder Instability were recorded for clinical assessment. The mean follow-up time was 43.1 months (SD ± 17.4; 24-110 months) with a mean age of 34.7 years (SD ± 12.6). Workload was classified as per the REFA Association classification system. Postoperative duration of a patient's incapacity with respect to work and other subjective ratings were provided by the patients themselves. RESULTS: The mean incapacity of work was 2.73 months (95 % CI 1.19-5.36). The incapacity of work was 2.06 months (95 % CI 1.55-2.68) in the group with low physical strains at work (REFA 0-1) and 3.40 months (95 % CI 2.70-4.24) in the group with heavy workload (REFA 2-4/p = 0.005). Overall, the mean Constant-Murley Score was 87.7 (SD ± 13.5). The average UCLA Shoulder Score summed up to 31.9 (SD ± 3.87) and the mean ROWE Score was 87.6 (SD ± 21.7). 13 (17.5 %) patients had problems to compete in their jobs. Three patients had to change the job postoperatively. CONCLUSION: In this study, a relationship between the time of incapacity of work and the workload was observed; patients with low physical strains returned significantly earlier to work after arthroscopic Bankart repair (p = 0.005). In general, the clinical results as measured in the Constant/UCLA/Rowe score were comparable to other studies.

Double intramedullary cortical button versus suture anchors for distal biceps tendon repair: a biomechanical comparison.

PURPOSE: The aim of this biomechanical in vitro study was to compare the novel technique of double intramedullary cortical button (DICB) fixation with the well-established method of suture anchor (SA) fixation for distal biceps tendon repair. METHODS: A matched-pair analysis (24 human cadaveric radii) was performed with respect to cyclic loadings and failure strengths. Twelve specimens per group were cyclically loaded for 1,000 cycles at 1.5 Hz from 5 to 50 N and from 5 to 100 N, respectively. The tendon-bone displacement was optically analysed using the Image J Software (National Institute of Health). Afterwards, all specimens were pulled to failure. Maximum load to failure and mode of failure were recorded. RESULTS: All DICB constructs passed the cyclic loading test, whereas 4 of the 12 specimens within the SA group failed by anchor pull-out. Cyclic loading showed a mean tendon-bone displacement of 0.6 ± 1.4 mm for the DICB group and 1.4 ± 1.4 mm for the SA group (n.s.) after 1,000 cycles with 50 N, and a mean displacement of 2.1 ± 2.4 mm for the DICB group and 3.5 ± 3.7 mm for the SA group (n.s.) after 1,000 cycles with 100 N. Load to failure testing showed a mean failure load of 312 ± 76 N and a stiffness of 67.1 ± 11.7 N/mm for the DICB technique. The mean load to failure for the SA repair was 200 ± 120 N (n.s.) and the stiffness was 55.9 ± 21.3 N/mm (n.s.). CONCLUSIONS: The novel technique of DICB fixation showed small tendon-bone displacement during cyclic testing and reliable fixation strength to the bone in load to failure. Moreover, all DICB constructs passed cyclic loadings without failure. Based on the current findings, a more aggressive postoperative rehabilitation may be allowed for the DICB repair in clinical use.

Dynamic-locking-screw (DLS)-leads to less secondary screw perforations in proximal humerus fractures.

BACKGROUND: Loss of reduction and screw perforation causes high failure rates in the treatment of proximal humerus fractures. The purpose of the present study was to evaluate the early postoperative complications using modern Dynamic Locking Screws (DLS 3.7) for plating of proximal humerus fractures. METHODS: Between 03/2009 and 12/2010, 64 patients with acute proximal humerus fractures were treated by angular stable plate fixation using DLSs in a limited multi-centre study. Follow-up examinations were performed three, six, twelve and twenty-four weeks postoperatively and any complications were carefully collected. RESULTS: 56 of 64 patients were examined at the six-month follow-up. Complications were observed in 12 patients (22%). In five cases (9%), a perforation of the DLS 3.7 occurred. CONCLUSIONS: Despite the use of modern DLS 3.7, the early complications after plating of proximal humerus fractures remain high. The potential advantage of the DLS 3.7 regarding secondary screw perforation has to be confirmed by future randomized controlled trials.

Bone marrow oedema on MR imaging indicates ARCO stage 3 disease in patients with AVN of the femoral head.

OBJECTIVES: To test the hypothesis that bone marrow oedema (BME) observed on MRI in patients with avascular necrosis (AVN) of the femoral head represents an indicator of subchondral fracture. METHODS: Thirty-seven symptomatic hips of 27 consecutive patients (53% women, mean age 49.2) with AVN of the femoral head and associated BME on magnetic resonance (MR) imaging were included. MR findings were correlated with computed tomography (CT) of the hip and confirmed by histopathological examination of the resected femoral head. Imaging studies were analysed by two radiologists with use of the ARCO classification. RESULTS: On MR imaging a fracture line could be identified in 19/37 (51%) cases, which were classified as ARCO stage 3 (n = 15) and stage 4 (n = 4). The remaining 18/37 (49%) cases were classified as ARCO stage 2. However, in all 37/37 (100%) cases a subchondral fracture was identified on CT, indicating ARCO stage 3/4 disease. The extent of subchondral fractures and the femoral head collapse was graded higher on CT as compared to MRI (P < 0.05). Histopathological analysis confirmed bone necrosis and subchondral fractures. CONCLUSIONS: In patients with AVN, BME of the femoral head represents a secondary sign of subchondral fracture and thus indicates ARCO stage 3 disease. KEY POINTS: BME on MRI in AVN of femoral head indicates a subchondral fracture. BME in AVN of the femoral head represents ARCO stage 3/4 disease. CT identifies subchondral fractures and femoral head collapse better than MR imaging. This knowledge helps to avoid understaging and to trigger adequate treatment.

CT-based quantitative assessment of the surface size and en-face position of the coracoid block post-Latarjet procedure.

BACKGROUND: The success of shoulder stabilization with the Latarjet procedure might depend on the size of the bone graft and the positioning of the coracoid at the glenoid. The aim of this study was to quantitatively assess the surface of the coracoid bone graft and to assess its positioning in the en-face view. METHOD: A series of 21 patients (17 men, 4 women, 26.1 ± 6.8 years-9 right, 12 left shoulders) were prospectively included and followed up with CT scans between December 2010 and April 2012 at an average of 2.4 ± 0.7 months postoperatively. The retrospective analysis of the CT scans was performed with Osirix™ software. The coracoid surface was measured (cm(2)) in the sagittal plane. The positioning in relation to the center of the circumscribed circle of the glenoid was determined in the en-face clock face view of the glenoid. RESULTS: The grafts had a mean surface of 1.61 ± 0.51 cm(2) (mean ± standard deviation). The coracoid grafts were located between 01:05 hours (32.5°) and 05:33 hours (166.6°). Mean positioning was 02:00 hours (59.8° ± 16.1°) to 04:26 hours (133.0° ± 16.9°). The extent of the grafts was 73.2° ± 14.3°. DISCUSSION: The positioning of the coracoid graft on the clock face of the glenoid is situated in the decisive zone of 02:30-04:20 hours. The mean surface of the graft is smaller than expected from anatomical studies, but restores in defect situations bone stock in the potential defect areas at the anterior glenoid rim. LEVEL OF EVIDENCE: Level IV, prospective case series, treatment study.

Arthroscopic management of anterior shoulder instability with glenoid bone defects.

Bony deficiency of the anterior glenoid rim may significantly contribute to recurrent shoulder instability. Today, based on clinical and biomechanical data, a bony reconstruction is recommended in patients with bone loss of greater than 20-25 % of the glenoid surface area. Recent advances in arthroscopic instruments and techniques presently allow minimally invasive and arthroscopic reconstruction of glenoid bone defects and osteosynthesis of glenoid fractures. This article underlines the role of glenoid bone deficiency in recurrent shoulder instability, provides an update on the current management regarding this pathology and highlights the modern techniques for surgical treatment. Therefore, it can help orthopaedic surgeons in the treatment and decision-making when dealing with these difficult to treat patients in daily clinical practice.

Treatment for unstable distal clavicle fractures (Neer 2) with locking T-plate and additional PDS cerclage.

PURPOSE: The purpose of the current study was to assess the clinical and radiological results after locking T-plate osteosynthesis with coracoclavicular augmentation of unstable and displaced distal clavicle fractures (Neer type 2). METHODS: Thirty patients, treated between January 2007 and January 2010 were followed up after a median follow-up time of 12.2 months (range 4.7-37.2). The Constant and DASH scores were used to evaluate the clinical outcome, and anterior-posterior and 30° cephalic view radiographs were performed to assess the bony healing. RESULTS: In all patients, the fracture healing was achieved within the first 10 weeks after surgery. All patients regained good or excellent shoulder function and returned to previous occupation and activity levels. The mean Constant and DASH scores were 92.3 points and 6.2 points, respectively. We did not observe any severe intra- or post-operative complication within the time of follow-up. CONCLUSION: The presented technique turned out to be a reliable method providing good results without showing severe complications. LEVEL OF EVIDENCE: Case series, Level IV.

Return to sports activity after tibial plateau fractures: 89 cases with minimum 24-month follow-up.

BACKGROUND: Tibial plateau fractures requiring surgery are severe injuries. For professionals, amateurs, and recreational athletes, tibial plateau fractures might affect leisure and professional life. HYPOTHESIS: Athletic patients will be affected in their sporting activity after a tibial plateau fracture. Despite a long rehabilitation time and program, physical activity will change to low-impact sports. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: A total of 89 consecutive patients (age range, 14-76 years) were included in the study and were surveyed by a questionnaire. Inclusion criteria were surgical treatment of tibial plateau fractures between 2003 and 2009 with a minimum follow-up of 24 months. The sporting activity was determined at the time of injury, 1 year postoperatively, and at the time of the survey at an average of 52.8 months postoperatively. The clinical evaluation included the Lysholm score, the Tegner activity scale, the activity rating scale (ARS), and a visual analog scale (VAS) for pain perception. Fractures were classified and analyzed using both the Arbeitsgemeinschaft für Osteosynthesefragen (AO) and the Schatzker classifications. RESULTS: At the time of injury, 88.8% of all patients were engaged in sports compared with 62.9% 1 year postoperatively and 73.0% at the time of the survey. Of the professional or competitive athletes (n = 11 at the time of injury), only 2 returned to competition at the time of the survey. The number of different sporting activities declined from 4.9 at the time of injury to 3.6 at the time of the survey (P < .001). The sports frequency and the activity duration per week, being 2.8 sessions and 4.5 hours at the time of injury, respectively, declined to 2.4 sessions and 3.8 hours (P < .001 and P = .007, respectively) at the time of the survey, respectively. The Lysholm score (98.7 points before accident) and the VAS for pain perception (0.2 before accident) illustrated significant declines to 76.6 points for the Lysholm score and 2.6 for the VAS (P < .001 and P < .001, respectively) at the time of the survey. The high-energy traumas, Schatzker IV to VI, had significant worse results in the clinical scores compared with the low-energy traumas (Lysholm, P < .001; Tegner, P = .027). CONCLUSION: The majority of patients could not return to their previous level of activity, and for patients playing competitive sports, this injury can be a career ender. Overall, we noticed a postinjury shift toward activities with less impact. However, at the time of the survey, 73% of all patients were engaged in sports.

Reconstruction of displaced acromio-clavicular joint dislocations using a triple suture-cerclage: description of a safe and efficient surgical technique.

PURPOSE: In this retrospective study we investigated the clinical and radiological outcome after operative treatment of acute Rockwood III-V injuries of the AC-joint using two acromioclavicular (AC) cerclages and one coracoclavicular (CC) cerclage with resorbable sutures. METHODS: Between 2007 and 2009 a total of 39 patients fit the inclusion criteria after operative treatment of acute AC joint dislocation. All patients underwent open reduction and anatomic reconstruction of the AC and CC-ligaments using PDS® sutures (Polydioxane, Ethicon, Norderstedt, Germany). Thirty-three patients could be investigated at a mean follow up of 32±9 months (range 24-56 months). RESULTS: The mean Constant score was 94.3±7.1 (range 73-100) with an age and gender correlated score of 104.2%±6.9 (88-123%). The DASH score (mean 3.46±6.6 points), the ASES score (94.6±9.7points) and the Visual Analogue Scale (mean 0.5±0,6) revealed a good to excellent clinical outcome. The difference in the coracoclavicular distance compared to the contralateral side was <5 mm for 28 patients, between 5-10 mm for 4 patients, and more than 10 mm for another patient. In the axial view, the anterior border of the clavicle was within 1 cm (ventral-dorsal direction) of the anterior rim of the acromion in 28 patients (85%). Re-dislocations occured in three patients (9%). CONCLUSION: Open AC joint reconstruction using AC and CC PDS cerclages provides good to excellent clinical results in the majority of cases. However, radiographically, the CC distance increased significantly at final follow up, but neither the amount of re-dislocation nor calcifications of the CC ligaments or osteoarthritis of the AC joint had significant influence on the outcome. LEVEL OF EVIDENCE: Case series, Level IV.