Pharmaceutical Approach to Develop Novel Photosensitizer Nanoformulation: An Example of Design and Characterization Rationale of Chlorophyll α Derivative.

In this study, we described physico-chemical properties of novel nanoformulation of photosensitizer-pyropheophorbide α 17-diethylene glycol ester (XL) (chlorophyll α derivative), revealing insights into antitumor activity and maintaining quality, meeting the pharmaceutical approach of new nanoformulation design. Our formulation, based on poly(lactic-co-glycolic acid) (PLGA) nanoparticles, increased XL solubility and selective tumor-targeted accumulation. In our research, we revealed, for the first time, that XL binding to polyvinyl alcohol (PVA) enhances XL photophysical activity, providing the rationale for PVA application as a stabilizer for nanoformulations. Results of FTIR, DSC, and XRD revealed the physical interactions between XL and excipients, including PVA, indicating that the encapsulation maintained XL binding to PVA. The encapsulated XL exhibited higher photophysical activity compared to non-encapsulated substance, which can be attributed to the influence of residual PVA. Gamma-irradiation led to degradation of XL; however, successful sterilization of the samples was achieved through the filtration. Importantly, the encapsulated and sterilized XL retained cytotoxicity against both 2D and 3D tumor cell models, demonstrating the potential of the formulated NP-XL for photodynamic therapy applications, but lacked the ability to reactivate epigenetically silenced genes. These findings provide valuable insights into the design and characterization of PLGA-based nanoparticles for the encapsulation of photosensitizers.

Structure and Performance of All-Green Electrospun PHB-Based Membrane Fibrous Biomaterials Modified with Hemin.

This work addresses the challenges concerning the development of "all-green" high-performance biodegradable membrane materials based on poly-3-hydroxybutyrate (PHB) and a natural biocompatible functional additive, iron-containing porphyrin, Hemin (Hmi) via modification and surface functionalization. A new facile and versatile approach based on electrospinning (ES) is advanced when modification of the PHB membranes is performed by the addition of low concentrations of Hmi (from 1 to 5 wt.%). Structure and performance of the resultant {HB/Hmi membranes were studied by diverse physicochemical methods, including differential scanning calorimetry, X-ray analysis, scanning electron microscopy, etc. Modification of the PHB fibrous membranes with Hmi allows control over their quality, supramolecular structure, morphology, and surface wettability. As a result of this modification, air and liquid permeability of the modified electrospun materials markedly increases. The proposed approach provides preparation of high-performance all-green membranes with tailored structure and performance for diverse practical applications, including wound healing, comfort textiles, facial protective masks, tissue engineering, water and air purification, etc.

Changes in Structural and Thermodynamic Properties of Starch during Potato Tuber Dormancy.

The main reserve polysaccharide of plants-starch-is undoubtedly important for humans. One of the main sources of starch is the potato tuber, which is able to preserve starch for a long time during the so-called dormancy period. However, accumulated data show that this dormancy is only relative, which raises the question of the possibility of some kind of starch restructuring during dormancy periods. Here, the effect of long-term periods of tuber rest (at 2-4 °C) on main parameters of starches of potato tubers grown in vivo or in vitro were studied. Along with non-transgenic potatoes, Arabidopsis phytochrome B (AtPHYB) transformants were investigated. Distinct changes in starch micro and macro structures-an increase in proportion of amorphous lamellae and of large-sized and irregular-shaped granules, as well as shifts in thickness of the crystalline lamellae-were detected. The degree of such alterations, more pronounced in AtPHYB-transgenic tubers, increased with the longevity of tuber dormancy. By contrast, the polymorphic crystalline structure (B-type) of starch remained unchanged regardless of dormancy duration. Collectively, our data support the hypothesis that potato starch remains metabolically and structurally labile during the entire tuber life including the dormancy period. The revealed starch remodeling may be considered a process of tuber preadaptation to the upcoming sprouting stage.

Main Characteristics of Processed Grain Starch Products and Physicochemical Features of the Starches from Maize (Zea mays L.) with Different Genotypes.

To understand the relationship between the genotype of maize plants and differences in their origin and the ploidy of the genome, which carry gene alleles programming the biosynthesis of various starch modifications, the thermodynamic and morphological features of starches from the grains of these plants have been studied. This study investigated the peculiarities of starch extracted from subspecies of maize (the dry matter mass (DM) fraction, starch content in grain DM, ash content in grain DM, and amylose content in starch) belonging to different genotypes within the framework of the program for the investigation of polymorphism of the world collection of plant genetic resources VIR. Among the starch genotypes of maize studied, four groups comprised the waxy (wx), conditionally high amylose ("ae"), sugar (su), and wild (WT) genotypes. Starches with an amylose content of over 30% conditionally belonged to the "ae" genotype. The starches of the su genotype had fewer starch granules than other investigated genotypes. An increase in amylose content in the investigated starches, accompanied by a decrease in their thermodynamic melting parameters, induced the accumulation of defective structures in the starches under study. The thermodynamic parameters evaluated for dissociation of the amylose-lipid complex were temperature (Taml) and enthalpy (Haml); for the su genotype, temperature and enthalpy values of dissociation of the amylose-lipid complex were higher than in the starches from the "ae" and WT genotypes. This study has shown that the amylose content in starch and the individual features of the maize genotype determine the thermodynamic melting parameters of the starches under study.

The Comparison of Advanced Electrospun Materials Based on Poly(-3-hydroxybutyrate) with Natural and Synthetic Additives.

The comparison of the effect of porphyrins of natural and synthetic origin containing the same metal atom on the structure and properties of the semi-crystalline polymer matrix is of current concern. A large number of modifying additives and biodegradable polymers for biomedical purposes, composed of poly(-3-hydroxybutyrate)-porphyrin, are of particular interest because of the combination of their unique properties. The objective of this work are electrospun fibrous material based on poly(-3-hydroxybutyrate) (PHB), hemin (Hmi), and tetraphenylporphyrin with iron (Fe(TPP)Cl). The structure of these new materials was investigated by methods such as optical and scanning electron microscopy, X-ray diffraction analysis, Electron paramagnetic resonance method, and Differential scanning calorimetry. The properties of the electrospun materials were analyzed by mechanical and biological tests, and the wetting contact angle was measured. In this work, it was found that even small concentrations of porphyrin can increase the antimicrobial properties by 12 times, improve the physical and mechanical properties by at least 3.5 times, and vary hydrophobicity by at least 5%. At the same time, additives similar in the structure had an oppositely directed effect on the supramolecular structure, the composition of the crystalline, and the amorphous phases. The article considers assumptions about the nature of such differences due to the influence of Hmi and Fe(TPP)Cl) on the macromolecular and fibrous structure of PHB.

Effect of Chitosan on the Activity of Water-Soluble and Hydrophobic Porphyrin Photosensitizers Solubilized by Amphiphilic Polymers.

In this work, we studied the photocatalytic activity of photosensitizers (PSs) of various natures solubilized with polyvinylpyrrolidone (PVP) and ternary block copolymer ethylene and propylene oxide Pluronic F127 (F127) in a model reaction of tryptophan photo-oxidation in water in the presence of chitosan (CT). Water-soluble compounds (dimegin and trisodium salt of chlorin e6 (Ce6)) and hydrophobic porphyrins (tetraphenylporphyrin (TPP) and its fluorine derivative (TPPF20)) were used as PSs. It was shown that the use of chitosan (Mw ~100 kDa) makes it possible to obtain a system whose activity is comparable to that of the photosensitizer-amphiphilic polymer systems. Thus, the previously observed drop in the photosensitizing activity of PS in the presence of a polysaccharide and amphiphilic polymers (AP) was absent in this case. At the same time, chitosan had practically no inhibitory effect on hydrophobic porphyrins solubilized by Pluronic F127.

Kinetic data analysis of chaperone-like activity of Wt, R69C and D109H αB-crystallins.

The α-Crystallin (α-Cry) functions as a molecular chaperone, preventing the formation of stress-induced protein aggregation which is important for maintenance of lens transparency. The kinetic data of Wt, R69C and D109H αB-Crys chaperone-like activity were obtained by UV-Vis spectroscopy in both thermal- and chemical-induced aggregation methods. The data were analyzed using physical parameters describing the aggregation process including t* (the characteristic of the stage of nucleation), and t 0.5 (the characteristic of the stage of aggregate growth) and I lim (the limiting value of the light scattering intensity). Parameter t* is duration of the lag phase and the lower t* value is associated with the higher rate of the nucleation stage. Also, the lower values of t 0.5 indicated the higher rate of aggregate growth stage. The change in parameter I lim in the presence of chaperones can be connected with the change in the size of protein aggregates. These data are related to the research article entitled "Structural and functional characterization of D109H and R69C mutant versions of human αB-crystallin: the biochemical pathomechanism underlying cataract and myopathy development" [1].

Structural and functional characterization of D109H and R69C mutant versions of human αB-crystallin: The biochemical pathomechanism underlying cataract and myopathy development.

In human αB-crystallin (αB-Cry), the highly conserved residues arginine 69 (R69) and aspartate 109 (D109) are located within a critical motif of α-crystallin domain (ACD), contributing to the subunit interactions and oligomeric assembly. Recently, two missense mutations (R69C and D109H) in human αB-Cry have been reported to cause congenital cataract and myopathy disorders. We used various spectroscopic techniques, dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), gel electrophoresis and transmission electron microscopy (TEM) to show how these mutations cause significant changes in structure, amyloidogenic feature and biological function of human αB-Cry. These pathogenic mutations resulted in the important alterations of the secondary, tertiary and oligomeric (quaternary) structures of human αB-Cry. The missense mutations were also capable to significantly increase the amyloidogenic propensity of human αB-Cry and to diminish the chaperone-like activity of this protein. The above mentioned changes were observed more noticeably after D109H mutation. The detrimental effects of D109H mutation may be due to the loss of salt bridge with R120 in the dimeric interface, flagging the anti-aggregation ability of αB-Cry chaperone. In conclusion, the R69C and D109H mutations displayed a significant damaging effect on the structure and chaperone function of human αB-Cry which could be considered as their biochemical pathomechanisms in development of congenital cataract and myopathy disorders.

Photocatalytic Properties of Tetraphenylporphyrins Immobilized on Calcium Alginate Aerogels.

We have prepared photocatalytic systems based on tetraphenylporphyrins (TPP) immobilized on calcium alginate solid gels in the conditions of thermal drying on air (xerogel), freeze drying in vacuum (cryogel) and supercritical drying in the supercritical carbon dioxide (scCO2) medium (aerogel). As a test reaction to measure the prepared systems' efficiency, we studied tryptophan photooxidation in the aqueous medium. We have demonstrated that the systems with aerogel as a carrier exhibited the highest photocatalytic efficiency. In that case, the rate constant for the test substrate (tryptophan) oxidation exceeds the corresponding rate constants of similar systems based on xerogel and cryogel by more than 5 times. Moreover, the aerogel-based photocatalytic systems demonstrated enhanced functional stability and a possibility of multiple use of such a catalyst in tryptophan oxidation. Based on the data of small-angle X-ray scattering and thermooxidative destruction, we have made a conclusion about the relationship between the high photocatalytic activity of aerogel-immobilized TPP and formation of a developed porous aerogel structure in the conditions of drying in the scCO2 medium, which is stabilized due to formation of additional complex bonds of calcium ions with fragments of glycoside rings.