Identification and characterization of rabbit scFv antibodies suitable for immuno-affinity separation of recombinant human kynureninase from Escherichia coli cell lysate.

In this study we successfully developed an on-demand affinity chromatographic resin for manufacturing non-Fc-based biopharmaceuticals. Affinity chromatography columns with immobilized rabbit single-chain variable fragments (scFvs) were used for directly purifying the recombinant human kynureninase (KYNase) as a model target therapeutic protein from Escherichia coli cell lysates. Among the 38 different anti-KYNase scFv clones identified, four unique clones were selected as candidates for further characterization owing to their relatively low KYNase binding affinity at pH 4.0, thereby facilitating enzyme elution. Subsequently, all four clones were successfully produced and purified, followed by covalent coupling to NHS-activated HiTrap HP columns. While KYNase was specifically adsorbed to all four scFv-immobilized columns and was eluted at pH 4.0, the respective levels of static binding capacity (SBC) and recovery among the four scFv clones were different at this elution pH. That is, the scFv-immobilized columns captured KYNase with SBC ranging from 1.15 to 2.68 mg/cm3-bed with clone R2-47 exhibiting the highest level of SBC, with a ligand utilization of 39.4 %. Moreover, using the scFv column of R2-47, 90.7 % of the captured human KYNase was recovered in the first elution step at pH 4.0, and approximately 67 % of enzymatic activity was retained. In summary, high-purity human KYNase was obtained from the E. coli cell lysate by one-step affinity purification, and 89.7 % of KYNase was recovered in the first elution step. The methodology demonstrated in the current study could be applied for the purification and development of various therapeutic proteins.

Crystal structure of human serum albumin in complex with megabody reveals unique human and murine cross-reactive binding site.

The pharmacokinetic properties of small biotherapeutics can be enhanced via conjugation to cross-reactive albumin-binding ligands in a process that improves their safety and accelerates testing through multiple pre-clinical animal models. In this context, the small and stable heavy-chain-only nanobody NbAlb1, capable of binding both human and murine albumin, has recently been successfully applied to improve the stability and prolong the in vivo plasma residence time of multiple small therapeutic candidates. Despite its clinical efficacy, the mechanism of cross-reactivity of NbAlb1 between human and murine serum albumins has not yet been investigated. To unveil the molecular basis of such an interaction, we solved the crystal structure of human serum albumin (hSA) in complex with NbAlb1. The structure was obtained by harnessing the unique features of a megabody chimeric protein, comprising NbAlb1 grafted onto a modified version of the circularly permutated and bacterial-derived protein HopQ. This structure showed that NbAlb1 contacts a yet unexplored binding site located in the peripheral region of domain II that is conserved in both human and mouse serum albumin proteins. Furthermore, we show that the binding of NbAlb1 to both serum albumin proteins is retained even at acidic pH levels, thus explaining its extended in vivo half-life. The elucidation of the molecular basis of NbAlb1 cross-reactivity to human and murine albumins might guide the design of novel nanobodies with broader reactivity toward a larger panel of serum albumins, thus facilitating the pre-clinical and clinical phases in humans.

Development and characterization of a latex turbidimetric immunoassay using rabbit anti-CRP single-chain Fv antibodies.

In this study, we developed and demonstrated a latex turbidimetric immunoassay (LTIA) using latex beads immobilized with rabbit monoclonal single-chain variable fragments (scFvs) selected from an scFv-displayed phage library. Sixty-five different anti-c-reactive protein (anti-CRP) scFv clones were identified after biopanning selection using antigen-coupled multi-lamellar vesicles. By ranking antigen-binding clones using the apparent dissociation rate constant (appkoff) as a sorting index, scFv clones with a dissociation constant (KD free) ranging from 4.07 × 10-9 M to 1.21 × 10-11 M were isolated. Among them, three candidates (R2-6, R2-45, and R3-2) were produced in the culture supernatant at concentrations of 50 mg/L or higher in flask culture and maintained at considerably high antigen-binding activity in immobilized state on the CM5 sensor chip surface. All the scFv-immobilized latexes (scFv-Ltxs) prepared were well-dispersed in 50 mM MOPS at pH 7.0, without additives for dispersion, and their antigen-dependent aggregation was sufficiently detectable. The reactivity of scFv-Ltx to antigen differed among the scFv clones, in particular, R2-45 scFv-Ltx detected the CRP with the highest signal. Furthermore, the reactivity of scFv-Ltx varied significantly with salt concentration, scFv immobilization density, and the type of blocking protein. Particularly, antigen-dependent latex aggregation improved significantly in all rabbit scFv clones when scFv-Ltx was blocked with horse muscle myoglobin compared with conventional bovine serum albumin; while their baseline signals in the absence of antigen were fully stable. Under optimal conditions, R2-45 scFv-Ltx exhibited greater aggregation signals with antigen concentrations higher than those produced by conventional polyclonal antibody-immobilized latex for CRP detection in LTIA. The methodology for rabbit scFv isolation, immobilization, and antigen-dependent latex aggregation demonstrated in the present study can be applicable to scFv-based LTIA for various target antigens.

Bypassing evolutionary dead ends and switching the rate-limiting step of a human immunotherapeutic enzyme.

The Trp metabolite kynurenine (KYN) accumulates in numerous solid tumours and mediates potent immunosuppression. Bacterial kynureninases (KYNases), which preferentially degrade kynurenine, can relieve immunosuppression in multiple cancer models, but immunogenicity concerns preclude their clinical use, while the human enzyme (HsKYNase) has very low activity for kynurenine and shows no therapeutic effect. Using fitness selections, we evolved a HsKYNase variant with 27-fold higher activity, beyond which exploration of >30 evolutionary trajectories involving the interrogation of >109 variants led to no further improvements. Introduction of two amino acid substitutions conserved in bacterial KYNases reduced enzyme fitness but potentiated rapid evolution of variants with ~500-fold improved activity and reversed substrate specificity, resulting in an enzyme capable of mediating strong anti-tumour effects in mice. Pre-steady-state kinetics revealed a switch in rate-determining step attributable to changes in both enzyme structure and conformational dynamics. Apart from its clinical significance, our work highlights how rationally designed substitutions can potentiate trajectories that overcome barriers in protein evolution.

Strategies for selection and identification of rabbit single-chain Fv antibodies as ligand in affinity chromatography.

We developed affinity chromatographic resins that immobilized rabbit single-chain Fv antibodies (scFvs). By biopanning using antigen-coupled multilamellar vesicles (Ag-MLVs), 152 types of original scFv clones that specifically bind to human IgG were isolated and identified. Apparent dissociation rate constants, appkoff, of six different candidates were less than 10-3 s-1 and their dissociation constants, KDs, were ranged from 5.56 × 10-10 to 4.04 × 10-8 M. Consequently, the clones, R1-27, R2-18, and R3-26 were further investigated for use in affinity purification of human IgG. Both the clones, R1-27 and R3-26 maintained more than 40% of antigen-binding activities on the surface of affinity resins. Especially, R3-26 had a relatively high alkaline resistance. The direct separation of human IgG from 10% FBS-D-MEM by use of the column with R1-27 achieved 97.2% purity, while the column with R3-26 showed almost 100% recovery. The affinity resins at the densities between 4.32 and 15.19 mg-scFv/cm3 exhibited maximum binding amount of human IgG, while the highest ligand utilization was achieved by use of the resin at approximately 9 mg-scFv/cm3. The resin exhibited 7.69 mg/cm3 of equilibrium binding capacity (EBC) in affinity chromatography. It was expected that the EBC of affinity resins was strongly dependent on the specific surface area as well as the pore volume of the base resin. Therefore, the strategies to develop affinity ligands will be beneficial for development of on-demand affinity columns with higher affinity/selectivity, chemical resistance, while optimization of pore size and pore volume for scFv-coupled resins will further improve the EBC.

Characterization of a macroporous epoxy-polymer based resin for the ion-exchange chromatography of therapeutic proteins.

This study investigated the adsorption capacity and mass transfer properties of a novel macroporous epoxy-polymer-based anion-exchanger, MPR Q, for the efficient separation of therapeutic proteins. MPR Q resin was prepared by phase separation based on spinodal decomposition followed by dextran grafting and ligand conjugation. Under static conditions, MPR Q exhibited a binding capacity of 49.8 mg-IgG/cm3-resin at pH 10, whereas the fastest adsorption was observed among the anion-exchanger resins tested. Inverse size-exclusion chromatography (iSEC) experiments revealed that the apparent pore diameter of MPR Q was approximately 90 nm, which was sufficiently large for the penetration of human IgG and bovine IgM. Moreover, the reduced height equivalent to a theoretical plate, h, of human IgG, determined using the linear gradient elution method was 65.8 and was not significantly changed in the range of linear velocities from 20.37 to 50.93 cm/min. The dynamic binding capacity at 10% breakthrough of MPR Q, determined by frontal analysis, exhibited a capacity of 43.8 mg/cm3 at 5.09 cm/min and 58% of DBC10% was maintained even though the linear velocity was increased to 50.93 cm/min. Furthermore, a resolution for separation of IgG and BSA by MPR Q was 1.06 at 5.09 cm/min, while it was higher than that for the conventional resin at all linear velocities from 5.09 cm/min to 50.93 cm/min. Thus, it was suggested that the MPR Q developed in this study is a promising resin that can efficiently separate large biomacromolecules such as human IgG at higher velocities.

Effective production of single-chain variable fragment (scFv) antibody using recombinant Escherichia coli by DO-stat fed-batch culture.

Dissolved oxygen (DO)-stat fed-batch culture, which allows a high cell density culture of microorganisms under constant DO conditions, was applied to anti-CRP single-chain variable fragment (scFv) production using recombinant Escherichia coli. The DO-stat fed-batch culture was successfully performed under various DO conditions for more than 50 h, resulting in increased scFv production from 0.5 to 0.8 g/L by flask and batch cultures to 2.8-3.0 g/L by the fed-batch culture under the conditions of 5-40% of DO saturation. The formation of inclusion bodies was effectively depressed during DO-stat fed-batch operation; consequently, the solubility of anti-CRP scFv was significantly improved from 36-43% by the flask and batch cultures to 96-98% by the DO-stat fed-batch culture under a wide range of DO conditions. From the kinetic analysis of fed-batch experiments, it was also found that the successful folding of anti-CRP scFv in the cytoplasm occurred when metabolic rates, such as the specific growth rate and specific glucose consumption rate, were relatively low. These results show that the fed-batch culture operated by the DO-stat feeding strategy was effective for the enhanced production of anti-CRP scFv with high solubility.

Combination of Aptamer Amplifier and Antigen-Binding Fragment Probe as a Novel Strategy to Improve Detection Limit of Silicon Nanowire Field-Effect Transistor Immunosensors.

Detecting proteins at low concentrations in high-ionic-strength conditions by silicon nanowire field-effect transistors (SiNWFETs) is severely hindered due to the weakened signal, primarily caused by screening effects. In this study, aptamer as a signal amplifier, which has already been reported by our group, is integrated into SiNWFET immunosensors employing antigen-binding fragments (Fab) as the receptors to improve its detection limit for the first time. The Fab-SiNWFET immunosensors were developed by immobilizing Fab onto Si surfaces modified with either 3-aminopropyltriethoxysilane (APTES) and glutaraldehyde (GA) (Fab/APTES-SiNWFETs), or mixed self-assembled monolayers (mSAMs) of polyethylene glycol (PEG) and GA (Fab/PEG-SiNWFETs), to detect the rabbit IgG at different concentrations in a high-ionic-strength environment (150 mM Bis-Tris Propane) followed by incubation with R18, an aptamer which can specifically target rabbit IgG, for signal enhancement. Empirical results revealed that the signal produced by the sensors with Fab probes was greatly enhanced compared to the ones with whole antibody (Wab) after detecting similar concentrations of rabbit IgG. The Fab/PEG-SiNWFET immunosensors exhibited an especially improved limit of detection to determine the IgG level down to 1 pg/mL, which has not been achieved by the Wab/PEG-SiNWFET immunosensors.

Efficient and robust isolation of rabbit scFv antibodies using antigen-coupled multilamellar vesicles.

We demonstrated an efficient screening method for rabbit scFv antibodies using antigen-coupled multi-lamellar vesicles (Ag-MLVs) as solid supports. Model phages displaying mouse anti-human IgG scFv at a probability of 10-4-10-5% were successfully isolated by Ag-MLVs after 3 or less rounds of biopanning, whereas they could not be isolated using conventional antigen-coated immunotubes. This screening method was applied to isolate rabbit antigen-specific scFvs from 4 different phage libraries. Biopanning procedures employing Ag-MLVs yielded positive phages in the 3rd round or earlier, and specific antigen-binding of scFvs was observed after the 1st round in two biopanning selections. The dissociation rate constants (koff) of isolated scFv clones tended to decrease with progressing biopanning rounds. The average dissociation constants (KD) of the isolated scFvs ranged between 1.7 and 87 nM, whereas the lowest KD of 12 pM was recorded for anti-CRP scFv. Comprehensive characterization of 355 different clones of the isolated rabbit scFvs presented a relatively low isoelectric point, and most of these were more thermo-stable than the conventional mouse scFvs, based on their instability and aliphatic indices. These results clearly indicate the advantages and potential of a combination of rabbit scFv-displaying phage library and biopanning using Ag-MLVs for antibody discovery. In addition, the results obtained in this study support the suitability of rabbit scFvs for several applications, including the development of diagnostic agents and affinity ligands for molecular diagnosis and bioseparation.

Design and site-directed immobilization of single-chain Fv antibody to polystyrene latex beads via material-binding peptides and application to latex turbidimetric assay.

In this study, immobilization of single-chain Fv (scFv) antibodies on the surfaces of polystyrene (PS) latex beads via material-binding peptides was investigated for sensitive immuno-turbidimetric assay of C-reactive protein (CRP). Anti-CRP scFvs fused with polystyrene-binding peptide (PS-tag) and poly(methylmethacrylate)-binding peptide (PMMA-tag) were over-expressed in Escherichia coli cells and recovered in the active form following refolding. The beads with PMMA-tag-fused scFv (scFv-PM) were successfully suspended with sufficient dispersion at pH 8.0. Three types of alternative scFv-PMs with a penta-asparatic acid tag (D5-tag) introduced at different positions were then designed. All of the D5-tagged scFv-PMs were successfully immobilized on the surfaces of beads with no significant change in the diameter of the latex beads at pH levels ranging from 6.0 to 8.0. According to the results of turbidimetric assay for the detection of CRP, 13 ng/ml of CRP was detectable using beads with D5-tagged scFv-PMs at 400 ng/cm3, and no turbidity change was observed in the absence of antigen. When the density of scFv-PM was 250 ng/cm2, which was 63% of the maximum density, the beads were dispersed well and reactive with the antigen at a concentration range comparable to those with D5-tagged scFv-PMs. These results indicate that controlling charge density on the surface of beads after site-directed immobilization is definitely important in order to maintain high levels of dispersion and reactivity. Thus, the usefulness of the scFv-PM as well as D5-tagged scFv-PMs developed in the present study should be significant when used as ligand antibodies in the preparation of immuno-latex beads.

Conformational Dynamics Contribute to Substrate Selectivity and Catalysis in Human Kynureninase.

Kynureninases (KYNases) are enzymes that play a key role in tryptophan catabolism through the degradation of intermediate kynurenine and 3'-hydroxy-kynurenine metabolites (KYN and OH-KYN, respectively). Bacterial KYNases exhibit high catalytic efficiency toward KYN and moderate activity toward OH-KYN, whereas animal KYNases are highly selective for OH-KYN, exhibiting only minimal activity toward the smaller KYN substrate. These differences reflect divergent pathways for KYN and OH-KYN utilization in the respective kingdoms. We examined the Homo sapiens and Pseudomonas fluorescens KYNases (HsKYNase and PfKYNase respectively) using pre-steady-state and hydrogen-deuterium exchange mass spectrometry (HDX-MS) methodologies. We discovered that the activity of HsKYNase critically depends on formation of hydrogen bonds with the hydroxyl group of OH-KYN to stabilize the entire active site and allow productive substrate turnover. With the preferred OH-KYN substrate, stabilization is observed at the substrate-binding site and the region surrounding the PLP cofactor. With the nonpreferred KYN substrate, less stabilization occurs, revealing a direct correlation with activity. This correlation holds true for PfKYNases; however there is only a modest stabilization at the substrate-binding site, suggesting that substrate discrimination is simply achieved by steric hindrance. We speculate that eukaryotic KYNases use dynamic mobility as a mechanism of substrate specificity to commit OH-KYN to nicotinamide synthesis and avoid futile hydrolysis of KYN. These findings have important ramifications for the engineering of HsKynase with high KYN activity as required for clinical applications in cancer immunotherapy. Our study shows how homologous enzymes with conserved active sites can use dynamics to discriminate between two highly similar substrates.

Oriented immobilization of rBC2LCN lectin for highly sensitive detection of human pluripotent stem cells using cell culture supernatants.

Human pluripotent stem cells (hPSCs) are considered ideal cell sources for regenerative medicine, but their clinical and industrial applications are hindered by their tumorigenic potential. We previously identified an hPSC-specific lectin, rBC2LCN, that recognizes the podocalyxin glycoprotein secreted by undifferentiated hPSCs into the culture media. Using biotinylated rBC2LCN and a peroxidase-labeled R-10G antibody, we developed a sandwich assay for the detection of tumorigenic hPSCs. In this assay, the lectin is randomly immobilized on streptavidin-coated microplates to capture hPSC-derived podocalyxin. In the present study, rBC2LCN was genetically fused with polystyrene-binding peptides (PS-tags) for direct, site-specific, and oriented immobilization on polystyrene microplates. rBC2LCN lectins fused with PS-tags at the C-terminus were successfully overexpressed as a soluble form in Escherichia coli and then purified by affinity chromatography. We optimized the various parameters (protein and NaCl concentration, buffer pH, and blocking agents) of the sandwich assay by using PS-tagged rBC2LCN and the R-10G antibody. Finally, the lower limit of detection (LLOD) of the sandwich assay for hPSCs was examined. The LLOD was 2.2-fold lower than that achieved with the previous method. Considering that the developed method does not require the precoating of polystyrene microplates with streptavidin, it provides a cost-effective approach for the highly sensitive detection of hPSCs residing in hPSC-derived cell therapeutics.

Reversal of indoleamine 2,3-dioxygenase-mediated cancer immune suppression by systemic kynurenine depletion with a therapeutic enzyme.

Increased tryptophan (Trp) catabolism in the tumor microenvironment (TME) can mediate immune suppression by upregulation of interferon (IFN)-γ-inducible indoleamine 2,3-dioxygenase (IDO1) and/or ectopic expression of the predominantly liver-restricted enzyme tryptophan 2,3-dioxygenase (TDO). Whether these effects are due to Trp depletion in the TME or mediated by the accumulation of the IDO1 and/or TDO (hereafter referred to as IDO1/TDO) product kynurenine (Kyn) remains controversial. Here we show that administration of a pharmacologically optimized enzyme (PEGylated kynureninase; hereafter referred to as PEG-KYNase) that degrades Kyn into immunologically inert, nontoxic and readily cleared metabolites inhibits tumor growth. Enzyme treatment was associated with a marked increase in the tumor infiltration and proliferation of polyfunctional CD8+ lymphocytes. We show that PEG-KYNase administration had substantial therapeutic effects when combined with approved checkpoint inhibitors or with a cancer vaccine for the treatment of large B16-F10 melanoma, 4T1 breast carcinoma or CT26 colon carcinoma tumors. PEG-KYNase mediated prolonged depletion of Kyn in the TME and reversed the modulatory effects of IDO1/TDO upregulation in the TME.

Identification and characterization of polydimethylsiloxane-binding peptides (PDMS-tag) for oriented immobilization of functional protein on a PDMS surface.

In this study we focused on identifying and characterizing polydimethylsiloxane-binding peptides (PDMS-tags) that show a strong binding affinity towards a PDMS surface. Three kinds of E. coli host proteins (ELN, OMC and TPA) that were preferentially adsorbed onto a PDMS surface were identified from the E. coli cell lysate via 2-D electrophoresis and MALDI TOF MS. Digestion of these PDMS-binding proteins by 3 types of proteases (trypsin, chymotrypsin and V8 protease) resulted in the production of a wide variety of peptide fragments with different amino acid biases. Nine types of peptide fragments showing binding affinities to a PDMS surface were identified, and they were genetically fused at the C-terminal region of glutathione S-transferase (GST). The adsorption kinetics of peptide-fused GSTs to a PDMS surface were evaluated using a quartz crystal microbalance (QCM) sensor equipped with a sensor chip coated with a PDMS thin film. Consequently, all GSTs fused with the peptides adsorbed at a level higher than that of wild-type GST. In particular, the adsorption levels of GSTs fused with ELN-V81, TPA-V81, and OMC-V81 peptides were 8- to 10-fold higher than that of the wild-type GST. These results indicated that the selected peptides possessed a strong binding affinity towards a PDMS surface even in cases where they were introduced to the C-terminal region of a model protein. The remaining activities of GSTs with PDMS-binding peptides were also greater than that of the wild-type GST. Almost a third (30%) of enzymatic activity was maintained by genetic fusion of the peptide ELN-V81, compared with only 1.5% of wild-type GST in the adsorption state. Thus, the PDMS-binding peptides (PDMS-tags) identified in this study will be considerably useful for the site-specific immobilization of functional proteins to a PDMS surface, which will be a powerful tool in the fabrication of protein-based micro-reactors and biosearation chips.

Efficient preparation and site-directed immobilization of VHH antibodies by genetic fusion of poly(methylmethacrylate)-binding peptide (PMMA-Tag).

A PMMA-binding peptide (PMMA-tag) was genetically fused with the C-terminal region of an anti-human chorionic gonadotropin (hCG) single-domain antibody (VHH). It was over-expressed in an insoluble fraction of E. coli cells, and recovered in the presence of 8 M urea via one-step IMAC purification. Monomeric and denatured PMMA-tag-fused VHH (VHH-PM) was successfully prepared via the reduction and oxidation of VHH-PM at a concentration less than 1 mg/mL in the presence of 8 M of urea. Furthermore, the VHH-PM was refolded with a recovery of more than 95% by dialysis against 50 mM TAPS at pH 8.5, because the genetic fusion of PMMA-tag resulted in a decrease in the apparent isoelectric point (pI) of the fusion protein, and its solubility at weak alkaline pH was considerably increased. The antigen-binding activities of VHH-PM in the adsorptive state were 10-fold higher than that of VHH without a PMMA-tag. The density of VHH-PM on a PMMA plate was twice that of VHH, indicating that the site-directed attachment of a PMMA-tag resulted in positive effects to the adsorption amount as well as to the orientation of VHH-PM in its adsorptive state. The preparation and immobilization methods for VHH-PM against hCG developed in the present study were further applied to VHH-PMs against four different antigens, and consequently, those antigens with the concentrations lower than 1 ng/mL were detected by the sandwich ELISA. Thus, the VHH-PMs developed in the present study are useful for preparation of high-performance and economical immunosorbent for detection of biomarkers.

Phase analysis in single-chain variable fragment production by recombinant Pichia pastoris based on proteomics combined with multivariate statistics.

The proteomics technique, which consists of two-dimensional gel electrophoresis (2-DE), peptide mass fingerprinting (PMF), gel image analysis, and multivariate statistics, was applied to the phase analysis of a fed-batch culture for the production of a single-chain variable fragment (scFv) of an anti-C-reactive protein (CRP) antibody by Pichia pastoris. The time courses of the fed-batch culture were separated into three distinct phases: the growth phase of the batch process, the growth phase of the fed-batch process, and the production phase of the fed-batch process. Multivariate statistical analysis using 2-DE gel image analysis data clearly showed the change in the culture phase and provided information concerning the protein expression, which suggested a metabolic change related to cell growth and production during the fed-batch culture. Furthermore, specific proteins, such as alcohol oxidase, which is strongly related to scFv expression, and proteinase A, which could biodegrade scFv in the latter phases of production, were identified via the PMF method. The proteomics technique provided valuable information about the effect of the methanol concentration on scFv production.

Site-specific immobilization of recombinant antibody fragments through material-binding peptides for the sensitive detection of antigens in enzyme immunoassays.

The immobilization of an antibody is one of the key technologies that are used to enhance the sensitivity and efficiency of the detection of target molecules in immunodiagnosis and immunoseparation. Recombinant antibody fragments such as VHH, scFv and Fabs produced by microorganisms are the next generation of ligand antibodies as an alternative to conventional whole Abs due to a smaller size and the possibility of site-directed immobilization with uniform orientation and higher antigen-binding activity in the adsorptive state. For the achievement of site-directed immobilization, affinity peptides for a certain ligand molecule or solid support must be introduced to the recombinant antibody fragments. In this mini-review, immobilization technologies for the whole antibodies (whole Abs) and recombinant antibody fragments onto the surfaces of plastics are introduced. In particular, the focus here is on immobilization technologies of recombinant antibody fragments utilizing affinity peptide tags, which possesses strong binding affinity towards the ligand molecules. Furthermore, I introduced the material-binding peptides that are capable of direct recognition of the target materials. Preparation and immobilization strategies for recombinant antibody fragments linked to material-binding peptides (polystyrene-binding peptides (PS-tags) and poly (methyl methacrylate)-binding peptide (PMMA-tag)) are the focus here, and are based on the enhancement of sensitivity and a reduction in the production costs of ligand antibodies. This article is part of a Special Issue entitled: Recent advances in molecular engineering of antibody.

Efficient refolding and immobilization of PMMA-tag-fused single-chain Fv antibodies for sensitive immunological detection on a PMMA plate.

In this study, we investigated the efficient refolding and site-specific immobilization of single-chain variable fragments (scFvs) genetically fused with a poly(methylmethacrylate)-binding peptide (PMMA-tag). According to the results of an aggregation test of a scFv-PM in the presence of 0.5 M urea, aggregation was hardly detectable at a weak-alkaline pH (8.5) with lower concentrations of NaCl. Consequently, more than 93% recovery of the anti-RNase scFv-PM model was attained, when it was refolded by dialysis against 50 mM TAPS (pH8.5). These results suggested that the apparent isoelectric point (pI) of a target scFv was decreased to a great extent by the genetic fusion of a PMMA-tag containing 5 acidic amino acids, and, thus, the solubility of the scFv-PM in its semi-denatured form was considerably improved. We also designed alternative peptide-tags composed of plural aspartic acid residues (D5, D10 and D15-tags) to decrease the apparent pI value of the fusion protein. As a consequence, scFv-D5, scFv-D10 and scFv-D15 were also efficiently refolded with yields of more than 95%. It is noteworthy that even scFv-PS-D15, which had both a positively charged polystyrene-binding peptide (PS-tag) and a negatively charged D15-tag, was serially connected at the C-terminal region of scFvs, and also refolded with a yield of 96.1%. These results clearly indicate that controlling the apparent pI value of scFvs by the fusion of oligo-peptides composed of acidic amino acids at the C-terminus resulted in a high degree of recovery via dialysis refolding. According to the results of a sandwich ELISA using scFv-PMs, scFv-D15 and scFv-PS-D15 as ligands, high antigen-binding signals were detected from both the PMMA and phi-PS plates immobilized with scFv-PMs. Furthermore, the high antigen-binding activity of scFv-PMs was maintained in an adsorption state when it was immobilized on the surface of not only PMMA, but also hydrophilic PS (phi-PS) and polycarbonate (PC). These results strongly suggested that a PMMA-tag introduced at the C-terminus of scFvs preferably recognizes ester and/or carboxyl groups exposed on the surface of plastics. The scFv-PM developed in the present study has advantages such as being a ligand antibody, compared with whole Ab and the conventional PS-tag-fused scFvs (scFv-PS), and, thus, it is considerably useful in a sandwich ELISA as well as in various immuno-detection and immuno-separation systems.

Identification and characterization of peptide fragments for the direct and site-specific immobilization of functional proteins onto the surface of silicon nitride.

In this study, we successfully identified peptide fragments that have a strong affinity toward the surface of a silicon nitride (SiN) substrate. An E. coli soluble protein, which was preferentially adsorbed onto the surface of a SiN substrate was isolated by 2D electrophoresis, and it was identified as "elongation factor Tu (ELN)" via the peptide MS fingerprinting method. A recombinant ELN that was originally cloned and produced, also maintained its adsorptive ability to a SiN substrate, by comparison with BSA that was used as a control protein. The peptide fragments derived from the recombinant ELN were prepared via 3 types of proteases with different recognition properties (trypsin, chymotrypsin and V8 protease). The peptide mixture was applied to the surface of a SiN substrate, and then, the SiN-binding peptide candidates were isolated and identified. The amino acid sequences of the peptide candidates were genetically fused with the C-terminal region of glutathione S-transferase as a model protein, and the adsorption properties of mutant-type GSTs on the surface of a SiN substrate were directly monitored using a reflectometric interference spectroscopy (RIfS) sensor system. Consequently, among the 8 candidates identified, the genetic fusion of TP14, V821 and CT22 peptides resulted in a significant enhancement of GST adsorption to the surface of the SiN substrate, while the adsorption of a wild-type GST was hardly detectable by RIfS sensor. These peptide fragments were located at the C-terminal region in the aminoacid sequence of recombinant ELN. Interestingly, the sequence with the shortest and strongest SiN-binding peptide, TP14 (GYRPQFYFR), was also found in that of V821 (GGRHTPFFKGYRPQFYFRTTDVTGTIE). The TP14 peptide might be the smallest unit of SiN-binding peptide, and a clarification of the amino acid contribution in TP14 peptide will be the next subject. Three-fold higher enzymatic activities were detected from the SiN substrate immobilized with GST-TP14 and GST-V821 due to a higher density of enzyme through the SiN-binding peptides. Thus, the SiN-binding peptides identified in this study will be considerably useful for the immobilization of target proteins with high density and biological activity onto the surfaces of SiN substrates, and these will be applicable to the task of coating proteins onto the surface of SiN-based RIfS sensors and semiconductors.

Immobilization and functional reconstitution of antibody Fab fragment by solid-phase refolding.

In this study, we demonstrated the successful preparation of a Fab antibody-immobilized hydrophilic polystyrene (phi-PS) plate via one- and two-step solid-phase refolding methods. Both polystyrene-binding peptide (PS-tag)-fused Fd fragment of heavy chain (Fab H-PS) and full-length of light-chain (Fab L-PS) were individually produced in insoluble fractions of Escherichia coli cells, and they were highly purified in the presence of 8M of urea. Antigen-binding activities of Fab antibody immobilized were correctly recovered by the one-step solid-phase refolding method that a mixture of Fab H-PS and Fab L-PS was immobilized in the presence of 0.5-2M urea, followed by surface washing of the phi-PS plate with PBST. These results indicate that by genetic fusion of a PS-tag, a complex between Fab H and Fab L was efficiently immobilized on the surface of a phi-PS plate even in the presence of a low concentration of urea, and was then correctly refolded to retain its high antigen-binding activity via removal of the urea. A two-step solid-phase refolding method whereby Fab H-PS and Fab L-PS were successively refolded on the surface of a phi-PS plate also resulted in Fab antibody formation on the plate. Furthermore, both the binding affinity and the specificity of the Fab antibody produced by the two-step method were highly maintained, according to the results of sandwich ELISA and competitive ELISA using Fab antibody-immobilized plate via two-step solid-phase refolding. Thus, the solid-phase refolding method demonstrated in this study should be quite useful for the preparation of a Fab antibody-immobilized PS surface with high efficiency from individually produced Fab H-PS and Fab L-PS. This method will be applicable to the preparation of a large Fab antibody library on the surface of a PS plate for use in antibody screening.