Cobalt ferrite/semiconducting single-walled carbon nanotubes based field-effect transistor for determination of carbamate pesticides.

Carbaryl and carbofuran are the carbamate pesticides which have been widely used worldwide to control insects in crops and house. If the pesticides entered in to the food products and drinking water, they could cause serious health effects in humans. Therefore, the development of a rapid, simple, sensitive and selective analytical device for on-site detection of carbamates is crucial to evaluate food and environmental samples. Recently, semiconducting single-walled carbon nanotube-based field effect transistors (s-SWCNT/FETs) have shown several advantages such as high carrier mobility, good on/off ratio, quasi ballistic electron transport, label-free detection and real-time response. Herein, cobalt ferrite (CFO) nanoparticles decorated s-SWCNTs have been prepared and used to bridge the source and drain electrodes. As-prepared CFO/s-SWCNT/FET had been used for the non-enzymatic detection of carbaryl and carbofuran. When used as a sensing platform, the CFO/s-SWCNT hybrid film exhibited high sensitivity, and selectivity with a wide linear range of detection from 10 to 100 fMand the lowest limit of detections for carbaryl (0.11 fM) and carbofuran (0.07 fM) were estimated. This sensor was also used to detect carbaryl in tomato and cabbage samples, which confirmed its practical acceptance. Such performance may be attributed to the oxidation of carbamates by potent catalytic activity of CFO, which led to the changes in the charge transfer reaction on the s-SWCNTs/FET conduction channel. This work presents a novel CFO/s-SWCNT based sensing system which could be used to quantify pesticide residues in food samples.

Peptide-based direct electrochemical detection of receptor binding domains of SARS-CoV-2 spike protein in pristine samples.

RNA isolation and amplification-free user-friendly detection of SARS-CoV-2 is the need of hour especially at resource limited settings. Herein, we devised the peptides of human angiotensin converting enzyme-2 (hACE-2) as bioreceptor at electrode interface for selective targeting of receptor binding domains (RBD) of SARS-CoV-2 spike protein (SP). Disposable carbon-screen printed electrode modified with methylene blue (MB) electroadsorbed graphene oxide (GO) has been constructed as cost-efficient and scalable platform for hACE-2 peptide-based SARS-CoV-2 detection. In silico molecular docking of customized 25 mer peptides with RBD of SARS-CoV-2 SP were validated by AutoDock CrankPep. N-terminal region of ACE-2 showed higher binding affinity of - 20.6 kcal/mol with 15 H-bond, 9 of which were < 3 Å. Electrochemical biosensing of different concentrations of SPs were determined by cyclic voltammetry (CV) and chronoamperometry (CA), enabling a limit of detection (LOD) of 0.58 pg/mL and 0.71 pg/mL, respectively. MB-GO devised hACE-2 peptide platform exert an enhanced current sensitivity of 0.0105 mA/pg mL-1 cm-2 (R2 = 0.9792) (CV) and 0.45 nA/pg mL-1 (R2 = 0.9570) (CA) against SP in the range of 1 pg/mL to 1 µg/mL. For clinical feasibility, nasopharyngeal and oropharyngeal swab specimens in viral transport medium were directly tested with the prepared peptide biosensor and validated with RT-PCR, promising for point-of-need analysis.

Electrochemical biosensor for methyl parathion based on single-walled carbon nanotube/glutaraldehyde crosslinked acetylcholinesterase-wrapped bovine serum albumin nanocomposites.

Semiconducting single-walled carbon nanotubes (s-SWCNTs) have been demonstrated as an excellent material for transistors, miniaturized devices and sensors due to their high carrier mobility, stability, scattering-free ballistic transport of carriers etc. Herein, we have designed a biosensor to selectively detect methyl parathion (MP, organophosphorus pesticide) using glutaraldehyde (Glu) cross-linked with acetylcholinesterase (AChE) immobilized on s-SWCNTs wrapped with bovine serum albumin (BSA). The fabricated biosensor was characterized and confirmed by Fourier-transform infrared spectroscopy (FT-IR), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and square wave voltammetry (SWV). In the presence of MP, the effective interaction between AChE and MP favours the accumulation of MP-AChE complex on the glassy carbon electrode (GCE) surface which reduces the electron transfer property. Based on this interaction, detection of various concentration of MP was demonstrated by SWV using BSA/AChE-Glu-s-SWCNTs composite modified electrode. The proposed biosensor exhibited a wide linear range (WLR) for MP target in 100 mM phosphate buffered saline solution (PBS) (pH 7.4) from 1 × 10-10 M to 5 × 10-6 M with a limit of detection (LOD) of 3.75 × 10-11 M. In addition, the BSA/AChE-Glu-s-SWCNTs/GCE biosensor showed good repeatability and reproducibility for MP detection. Moreover, the proposed biosensor showed better electrode stability when stored at 4 °C. This new electrochemical biosensor is also exhibited high selectivity and sensitivity for MP, which made it possible to test MP in real strawberry and apple juices. Furthermore, the BSA/AChE-Glu-s-SWCNTs/GCE offered a favourable electron transfer between the acetylthiocholine chloride (ATCl) and electrode interface than BSA/AChE-s-SWCNTs/GCE, s-SWCNTs/GCE and bare GCE.