RESUMO
The evolution of molecular platforms for singlet fission (SF) chromophores has fueled the quest for new compounds capable of generating triplets quantitatively at fast time scales. As the exploration of molecular motifs for SF has diversified, a key challenge has emerged in identifying when the criteria for SF have been satisfied. Here, we show how covalently bound molecular dimers uniquely provide a set of characteristic optical markers that can be used to distinguish triplet pair formation from processes that generate an individual triplet. These markers are contained within (i) triplet charge-transfer excited state absorption features, (ii) kinetic signatures of triplet-triplet annihilation processes, and (iii) the modulation of triplet formation rates using bridging moieties between chromophores. Our assignments are verified by time-resolved electron paramagnetic resonance (EPR) measurements, which directly identify triplet pairs by their electron spin and polarization patterns. We apply these diagnostic criteria to dimers of acenothiophene derivatives in solution that were recently reported to undergo efficient intermolecular SF in condensed media. While the electronic structure of these heteroatom-containing chromophores can be broadly tuned, the effect of their enhanced spin-orbit coupling and low-energy nonbonding orbitals on their SF dynamics has not been fully determined. We find that SF is fast and efficient in tetracenothiophene but that anthradithiophene exhibits fast intersystem crossing due to modifications of the singlet and triplet excited state energies upon functionalization of the heterocycle. We conclude that it is not sufficient to assign SF based on comparisons of the triplet formation kinetics between monomer and multichromophore systems.
RESUMO
The quintet triplet-pair state may be generated upon singlet fission and is a critical intermediate that dictates the fate of excitons, which can be exploited for photovoltaics, information technologies, and biomedical imaging. In this report, we demonstrate that continuous-wave and pulsed electron spin resonance techniques such as phase-inverted echo-amplitude detected nutation (PEANUT), which have emerged as the primary tool for identifying the spin pathways in singlet fission, probe fundamentally different triplet-pair species. We directly observe that the generation rate of high-spin triplet pairs is dependent on the molecular orientation with respect to the static magnetic field. Moreover, we demonstrate that this observation can prevent incorrect analysis of continuous-wave electron spin resonance (cw-ESR) measurements and provide insight into the design of materials to target specific pathways that optimize exciton properties for specific applications.
RESUMO
Interchromophoric interactions such as Coulombic coupling and exchange interactions are crucial to the functional properties of numerous π-conjugated systems. Here, we use magnetic circular dichroism (MCD) spectroscopy to investigate interchromophoric interactions in singlet fission relevant pentacene dimers. Using a simple analytical model, we outline a general relationship between the geometry of pentacene dimers and their calculated MCD response. We analyze experimental MCD spectra of different covalently bridged pentacene dimers to reveal how the molecular structure of the "bridge" affects the magnitude of through-space Coulombic and through-bond exchange interactions in the system. Our results show that through-bond interactions are significant in dimers with conjugated molecules as bridging units and these interactions promote the overall electronic coupling in the system. Our generalized approach paves the way for the application of MCD in investigating interchromophoric interactions across a range of π-conjugated systems.
RESUMO
We investigate triplet pair dynamics in pentacene dimers that have varying degrees of coplanarity (pentacene-pentacene twist angle). The fine-tuning of the twist angle was achieved by alternating connectivity at the 1-position or 2-positions of pentacene. This mix-and-match connectivity leads to tunable twist angles between the two covalently linked pentacenes. These twisted dimers allow us to investigate the subtle effects that the dihedral angle between the covalently linked pentacenes imparts on singlet fission and triplet pair recombination dynamics. We observe that as the dihedral angle between the two bonded pentacenes is increased, the rates of singlet fission decrease, while the accompanying decrease in triplet recombination rates is stark. Temperature-dependent transient optical studies combined with theoretical calculations show that the triplet pair recombination proceeds primarily through a direct multiexciton internal conversion process. Calculations further show that the significant decrease in recombination rates can be directly attributed to a corresponding decrease in the magnitude of the nonadiabatic coupling between the singlet multiexcitonic state and the ground state. These results highlight the importance of the twist angle in designing systems that exhibit rapid singlet fission, while maintaining long triplet pair lifetimes in pentacene dimers.
RESUMO
Molecular chirality can be exploited as a sensitive reporter of the nature of intra- and interchromophore interactions in π-conjugated systems. In this report, we designed an intramolecular singlet fission (iSF)-based pentacene dimer with an axially chiral binaphthyl bridge (2,2'-(2,2'-dimethoxy-[1,1'-binaphthalene]-3,3'-diyl) n-octyl-di-isopropyl silylethynyl dipentacene, BNBP) to utilize its chiroptical response as a marker of iSF chromophore-bridge-chromophore (SFC-ß-SFC) interactions. The axial chirality of the bridge enforces significant one-handed excitonic coupling of the pentacene monomer units; as such, BNBP exhibits significant chiroptical response in the ground and excited states. We analyzed the chiroptical response of BNBP using the exciton coupling method and quadratic response density functional theory calculations to reveal that higher energy singlet transitions in BNBP involve significant delocalization of the electronic density on the bridging binaphthyl group. Our results highlight the promising application of chiroptical techniques to investigate the nature of SFC-ß-SFC interactions that impact singlet fission dynamics.
RESUMO
Photoreaction of enamides tethered to a phenyl ketone leads to either [3+2]-photocycloaddition or Paternò-Büchi reaction. This divergence in chemical reactivity originating from the same excited state was dependent on the reaction temperature. At low temperatures the Paternò-Büchi reaction was preferred, whereas at higher temperatures there was preference toward formation of [3+2]-photoproduct.
Assuntos
TemperaturaRESUMO
A major benefit of intramolecular singlet fission (iSF) materials, in which through-bond interactions mediate triplet pair formation, is the ability to control the triplet formation dynamics through molecular engineering. One common design strategy is the use of molecular bridges to mediate interchromophore interactions, decreasing electronic coupling by increasing chromophore-chromophore separation. Here, we report how the judicious choice of aromatic bridges can enhance chromophore-chromophore electronic coupling. This molecular engineering strategy takes advantage of "bridge resonance", in which the frontier orbital energies are nearly degenerate with those of the covalently linked singlet fission chromophores, resulting in fast iSF even at large interchromophore separations. Using transient absorption spectroscopy, we investigate this bridge resonance effect in a series of pentacene and tetracene-bridged dimers, and we find that the rate of triplet formation is enhanced as the bridge orbitals approach resonance. This work highlights the important role of molecular connectivity in controlling the rate of iSF through chemical bonds and establishes critical design principles for future use of iSF materials in optoelectronic devices.
RESUMO
Per- and polyfluorinated alkyl substances (PFASs) contaminate groundwater, surface water, and finished drinking water internationally. Their ecological persistence and adverse human health effects demand effective remediation approaches. Motivated by the limitations in selectivity and performance of current PFAS removal technologies, we report a platform approach for the development of ionic fluorogel resins that effectively remove a chemically diverse mixture of PFAS from water. The synthesis of a material library with systematic variation in fluorous and ionic components led to the identification of a resin that demonstrated rapid removal of PFASs with high affinity and selectivity in the presence of nonfluorous contaminants commonly found in groundwater. The material can be regenerated and reused multiple times. We demonstrate ionic fluorogels as effective adsorbents for the removal of 21 legacy and emerging PFASs from settled water collected at the Sweeney Water Treatment Plant in Wilmington, North Carolina.
RESUMO
Singlet fission-that is, the generation of two triplets from a lone singlet state-has recently resurfaced as a promising process for the generation of multiexcitons in organic systems. Although advances in this area have led to the discovery of modular classes of chromophores, controlling the fate of the multiexciton states has been a major challenge; for example, promoting fast multiexciton generation while maintaining long triplet lifetimes. Unravelling the dynamical evolution of the spin- and energy conversion processes from the transition of singlet excitons to correlated triplet pairs and individual triplet excitons is necessary to design materials that are optimized for translational technologies. Here, we engineer molecules featuring a discrete energy gradient that promotes the migration of strongly coupled triplet pairs to a spatially separated, weakly coupled state that readily dissociates into free triplets. This 'energy cleft' concept allows us to combine the amplification and migration processes within a single molecule, with rapid dissociation of tightly bound triplet pairs into individual triplets that exhibit lifetimes of ~20 µs.
RESUMO
Singlet fission has emerged as a key mechanism of exciton multiplication in organic chromophores, generating two triplet excitons from a single photon. Singlet fission is typically studied in crystalline films or in isolated dimers. Here, we investigate an intermediate regime where through-space interactions mediate singlet fission and triplet pair recombination within isolated polymer chains. Specifically, we investigate how appending pentacenes to a polynorbornene backbone can lead to macromolecules that take advantage of through-space π-π interactions for fast singlet fission and rapid triplet pair dissociation. Singlet fission in these systems is affected by molecular dynamics, and triplet-triplet recombination is a geminate process where the rate of recombination scales with molecular-weight. We find that these pendent pentacene polymers yield free triplets with lifetimes that surpass those of crystalline chromophores in both solution as isolated polymers and in thin films.
RESUMO
Stable organic radicals have potential applications for building organic spintronic devices. To fulfill this potential, the interface between organic radicals and metal electrodes must be well characterized. Here, through a combined effort that includes synthesis, scanning tunneling microscopy, X-ray spectroscopy, and single-molecule conductance measurements, we comprehensively probe the electronic interaction between gold metal electrodes and a benchtop stable radical-the Blatter radical. We find that despite its open-shell character and having a half-filled orbital close to the Fermi level, the radical is stable on a gold substrate under ultrahigh vacuum. We observe a Kondo resonance arising from the radical and spectroscopic signatures of its half-filled orbitals. By contrast, in solution-based single-molecule conductance measurements, the radical character is lost through oxidation with charge transfer occurring from the molecule to metal. Our experiments show that the stability of radical states can be very sensitive to the environment around the molecule.
RESUMO
Recent synthetic studies on the organic molecules tetracene and pentacene have found certain dimers and oligomers to exhibit an intense absorption in the visible region of the spectrum that is not present in the monomer or many previously studied dimers. In this article we combine experimental synthesis with electronic structure theory and spectral computation to show that this absorption arises from an otherwise dark charge-transfer excitation "borrowing intensity" from an intense UV excitation. Further, by characterizing the role of relevant monomer molecular orbitals, we arrive at a design principle that allows us to predict the presence or absence of an additional absorption based on the bonding geometry of the dimer. We find this rule correctly explains the spectra of a wide range of acene derivatives and solves an unexplained structure-spectrum phenomenon first observed over 70 years ago. These results pave the way for the design of highly absorbent chromophores with applications ranging from photovoltaics to liquid crystals.
RESUMO
Singlet fission (SF) is an exciton multiplication process with the potential to raise the efficiency limit of single junction solar cells from 33% to up to 45%. Most chromophores generally undergo SF as solid-state crystals. However, when such molecules are covalently coupled, the dimers can be used as model systems to study fundamental photophysical dynamics where a singlet exciton splits into two triplet excitons within individual molecules. Here we report the synthesis and photophysical characterization of singlet fission of a hexacene dimer. Comparing the hexacene dimer to analogous tetracene and pentacene dimers reveals that excess exoergicity slows down singlet fission, similar to what is observed in molecular crystals. Conversely, the lower triplet energy of hexacene results in an increase in the rate of triplet pair recombination, following the energy gap law for radiationless transitions. These results point to design rules for singlet fission chromophores: the energy gap between singlet and triplet pair should be minimal, and the gap between triplet pair and ground state should be large.
RESUMO
The textbook photoreaction between two alkenes is the [2 + 2]-photocycloaddition resulting in functionalized cyclobutanes. Herein, we disclose an unusual reactivity of alkenes that favor photoene reaction over the [2 + 2]-photocycloaddition.
RESUMO
Singlet fission (SF), a promising mechanism of multiple exciton generation, has only recently been engineered as a fast, efficient, intramolecular process (iSF). The challenge now lies in designing and optimizing iSF materials that can be practically applied in high-performance optoelectronic devices. However, most of the reported iSF systems, such as those based on donor-acceptor polymers or pentacene, have low triplet energies, which limits their applications. Tetracene-based materials can overcome significant challenges, as the tetracene triplet state is practically useful, ≈1.2 eV. Here, the synthesis and excited state dynamics of a conjugated tetracene homopolymer are studied. This polymer undergoes ultrafast iSF in solution, generating high-energy triplets on a sub-picosecond time scale. Magnetic-field-dependent photocurrent measurements of polytetracene-based devices demonstrate the first example of iSF-generated triplet extraction in devices, exhibiting the potential of iSF materials for use in next-generation devices.
RESUMO
We have designed a series of pentacene dimers separated by homoconjugated or nonconjugated bridges that exhibit fast and efficient intramolecular singlet exciton fission (iSF). These materials are distinctive among reported iSF compounds because they exist in the unexplored regime of close spatial proximity but weak electronic coupling between the singlet exciton and triplet pair states. Using transient absorption spectroscopy to investigate photophysics in these molecules, we find that homoconjugated dimers display desirable excited-state dynamics, with significantly reduced recombination rates as compared to conjugated dimers with similar singlet fission rates. In addition, unlike conjugated dimers, the time constants for singlet fission are relatively insensitive to the interplanar angle between chromophores, since rotation about σ bonds negligibly affects the orbital overlap within the π-bonding network. In the nonconjugated dimer, where the iSF occurs with a time constant >10 ns, comparable to the fluorescence lifetime, we used electron spin resonance spectroscopy to unequivocally establish the formation of triplet-triplet multiexcitons and uncoupled triplet excitons through singlet fission. Together, these studies enable us to articulate the role of the conjugation motif in iSF.
RESUMO
Singlet fission, the conversion of a singlet exciton (S1) to two triplets (2 × T1), may increase the solar energy conversion efficiency beyond the Shockley-Queisser limit. This process is believed to involve the correlated triplet pair state 1(TT). Despite extensive research, the nature of the 1(TT) state and its spectroscopic signature remain actively debated. We use an end-connected pentacene dimer (BP0) as a model system and show evidence for a tightly bound 1(TT) state. It is characterized in the near-infrared (IR) region (~1.0 eV) by a distinct excited-state absorption (ESA) spectral feature, which closely resembles that of the S1 state; both show vibronic progressions of the aromatic ring breathing mode. We assign these near-IR spectra to 1(TT)âSn and S1âSn' transitions; Sn and Sn' likely come from the antisymmetric and symmetric linear combinations, respectively, of the S2 state localized on each pentacene unit in the dimer molecule. The 1(TT)âSn transition is an indicator of the intertriplet electronic coupling strength, because inserting a phenylene spacer or twisting the dihedral angle between the two pentacene chromophores decreases the intertriplet electronic coupling and diminishes this ESA peak. In addition to spectroscopic signature, the tightly bound 1(TT) state also shows chemical reactivity that is distinctively different from that of an individual T1 state. Using an electron-accepting iron oxide molecular cluster [Fe8O4] linked to the pentacene or pentacene dimer (BP0), we show that electron transfer to the cluster occurs efficiently from an individual T1 in pentacene but not from the tightly bound 1(TT) state. Thus, reducing intertriplet electronic coupling in 1(TT) via molecular design might be necessary for the efficient harvesting of triplets from intramolecular singlet fission.
RESUMO
Intramolecular atropselective aza Paternò-Büchi reaction involving atropisomeric enamide and imine functionalities under sensitized irradiation leads to azetidine products in good yield and selectivity (ee >96 %). A mechanistic model based on detailed photophysical and isomerization kinetic studies is provided that shed light into the reactivity of enamides leading to aza Paternò-Büchi reaction.
RESUMO
A complementary strategy of utilizing ππ* excited state of alkene instead of nπ* excited state of the carbonyl chromophore in a "transposed Paternò-Büchi" reaction is evaluated with atropisomeric enamides as the model system. Based on photophysical investigations, the nature of excited states and the reactive pathway was deciphered leading to atropselective reaction. This new concept of switching of excited-state configuration should pave the way to control the stereochemical course of photoreaction due to the orbital approaches required for photochemical reactivity.