RESUMO
High-resolution, high-speed 3D printing by two-photon polymerization (2PP) with a Nd:YVO4 Q-switched microchip laser at its fundamental wavelength of 1064 nm is demonstrated. Polymerization scan speeds of up to 20 mm/s and feature sizes of 250 nm are achieved using a high repetition rate Q-switched microchip laser with a semiconductor saturable absorber mirror (SESAM) and photoresist with a new photo-initiator bearing 6-dialkylaminobenzufuran as electron donor and indene-1,3-dione moiety as electron acceptor. The obtained results demonstrate the high potential of Q-switched microchip lasers for applications in 2PP 3D printing.
RESUMO
The endothelial glycocalyx and its regulated shedding are important to vascular health. Endo-ß-D-glucuronidase heparanase-1 (HPSE1) is the only enzyme that can shed heparan sulfate. However, the mechanisms are not well understood. We show that HPSE1 activity aggravated Toll-like receptor 4 (TLR4)-mediated response of endothelial cells to LPS. On the contrary, overexpression of its endogenous inhibitor, heparanase-2 (HPSE2) was protective. The microfluidic chip flow model confirmed that HPSE2 prevented heparan sulfate shedding by HPSE1. Furthermore, heparan sulfate did not interfere with cluster of differentiation-14 (CD14)-dependent LPS binding, but instead reduced the presentation of the LPS to TLR4. HPSE2 reduced LPS-mediated TLR4 activation, subsequent cell signalling, and cytokine expression. HPSE2-overexpressing endothelial cells remained protected against LPS-mediated loss of cell-cell contacts. In vivo, expression of HPSE2 in plasma and kidney medullary capillaries was decreased in mouse sepsis model. We next applied purified HPSE2 in mice and observed decreases in TNFα and IL-6 plasma concentrations after intravenous LPS injections. Our data demonstrate the important role of heparan sulfate and the glycocalyx in endothelial cell activation and suggest a protective role of HPSE2 in microvascular inflammation. HPSE2 offers new options for protection against HPSE1-mediated endothelial damage and preventing microvascular disease.
Assuntos
Células Endoteliais/citologia , Glucuronidase/genética , Lipopolissacarídeos/efeitos adversos , Sepse/metabolismo , Receptor 4 Toll-Like/metabolismo , Animais , Modelos Animais de Doenças , Células Endoteliais/metabolismo , Glucuronidase/sangue , Glucuronidase/metabolismo , Glicocálix/metabolismo , Heparitina Sulfato/metabolismo , Humanos , Masculino , Camundongos , Técnicas Analíticas Microfluídicas , Sepse/induzido quimicamente , Transdução de SinaisRESUMO
In this paper, approaches for the realization of high-resolution periodic structures with gap sizes at sub-100 nm scale by two-photon polymerization (2PP) are presented. The impact of laser intensity on the feature sizes and surface quality is investigated. The influence of different photosensitive materials on the structure formation is compared. Based on the elliptical geometry character of the voxel, the authors present an idea to realize high-resolution structures with feature sizes less than 100 nm by controlling the laser focus position with respect to the glass substrate. This investigation covers structures fabricated respectively in the plane along and perpendicular to the major axis of voxel. The authors also provide a useful approach to manage the fabrication of proposed periodic structure with a periodic distance of 200 nm and a gap size of 65 nm.
RESUMO
The use of autologous cells for the coating of implant surfaces presents a promising tool to attenuate foreign body reaction and inflammation. However, insertion forces that occur especially during implantation of electrodes into the narrow cochlea may strip off cells from the surface. Thus, implant surfaces should be ideally structured in a way that protects the cell coating from mechanical removal during implantation. The structuring of implant surfaces may also direct cells towards desired functions to further enhance their performance and clinical suitability. In this study, grid-like square cavities were generated on thermoplastic polyurethane (TPU) surfaces using a combination of femtosecond laser ablation and replication methods. Afterwards, they were tested as potential scaffolds for human bone marrow-derived mesenchymal stem cells (MSCs) in order to use it on neural prostheses. Structured and non-structured TPU allowed proper adhesion and survival of MSCs. Surface structuring resulted in regulation of over 500 genes. Many of the upregulated genes are known to be involved in anti-inflammatory, anti-fibrotic and wound healing processes whereas genes relevant for mesenchymal differentiation programs were downregulated. The enhanced secretion of two representative factors (prostaglandin E2 and interleukin-1 receptor antagonist, respectively) was confirmed by ELISA and the downregulation of other genes involved in adipogenic and osteogenic differentiation were confirmed by gene expression analysis for a cultivation period of up to 21 days. In addition, mRNA of the surface antigens CD24 and ENDOGLIN (CD105) as representative factors for stemness did not show notable variation between cultivation on structured versus non-structured TPU or between 7 versus 21days of cultivation. Thus, surface topography of TPU seems to be a powerful tool to protect cells from mechanical forces during insertion and to influence cell behaviour.
Assuntos
Fibrose/prevenção & controle , Inflamação/prevenção & controle , Células-Tronco Mesenquimais/patologia , Plásticos , Poliuretanos/química , Adulto , Células Cultivadas , Feminino , Humanos , Masculino , Adulto JovemRESUMO
Current treatments for human coronary artery disease necessitate the development of the next generations of vascular bioimplants. Recent reports provide evidence that controlling cell orientation and morphology through topographical patterning might be beneficial for bioimplants and tissue engineering scaffolds. However, a concise understanding of cellular events underlying cell-biomaterial interaction remains missing. In this study, applying methods of laser material processing, we aimed to obtain useful markers to guide in the choice of better vascular biomaterials. Our data show that topographically treated human primary vascular smooth muscle cells (VSMC) have a distinct differentiation profile. In particular, cultivation of VSMC on the microgrooved biocompatible polymer E-shell induces VSMC modulation from synthetic to contractile phenotype and directs formation and maintaining of cell-cell communication and adhesion structures. We show that the urokinase receptor (uPAR) interferes with VSMC behavior on microstructured surfaces and serves as a critical regulator of VSMC functional fate. Our findings suggest that microtopography of the E-shell polymer could be important in determining VSMC phenotype and cytoskeleton organization. They further suggest uPAR as a useful target in the development of predictive models for clinical VSMC phenotyping on functional advanced biomaterials.
Assuntos
Músculo Liso Vascular/citologia , Miócitos de Músculo Liso/citologia , Ativador de Plasminogênio Tipo Uroquinase/metabolismo , Comunicação Celular , Células Cultivadas , Adesões Focais/genética , Adesões Focais/metabolismo , Humanos , Músculo Liso Vascular/metabolismo , Miócitos de Músculo Liso/metabolismo , Ativador de Plasminogênio Tipo Uroquinase/genéticaRESUMO
A technique to fabricate electrically conductive all-polymer 3D microstructures is reported. Superior conductivity, high spatial resolution and three-dimensionality are achieved by successive application of two-photon polymerization and in situ oxidative polymerization to a bi-component formulation, containing a photosensitive host matrix and an intrinsically conductive polymer precursor. By using polyethylene glycol diacrylate (PEG-DA) and 3,4-ethylenedioxythiophene (EDOT), the conductivity of 0.04 S/cm is reached, which is the highest value for the two-photon polymerized all-polymer microstructures to date. The measured electrical conductivity dependency on the EDOT concentration indicates percolation phenomenon and a three-dimensional nature of the conductive pathways. Tunable conductivity, biocompatibility, and environmental stability are the characteristics offered by PEG-DA/EDOT blends which can be employed in biomedicine, MEMS, microfluidics, and sensorics.