Generation of more than 40 W of average output power from a passively Q-switched Yb-doped fiber laser.

We report on the generation of 41.6 W of average output power from a passively Q-switched ytterbium-doped fiber laser using Cr4+:YAG crystal as a saturable absorber (SA). This is the highest average power from passively Q-switched fiber lasers reported so far in the literature, to our knowledge, and it has been achieved by using a specially designed T-type double-end pumping configuration. Variation in average output power, pulse energy, pulse duration, pulse frequency, and pulse-to-pulse stability has also been studied using SAs of different linear transmissions. The effect of an intracavity SA on self-pulsing dynamics was also investigated and it was observed that, at lower input pump power near threshold, the presence of an SA enhances the peak power of relaxation oscillations to trigger the generation of stimulated Raman scattering in the gain fiber. With an increase in pump power, when the passive Q-switching threshold is reached, high peak power random self-pulses regenerate into low amplitude regular Q-switched pulses. The effect of the length of the gain medium on dual-wavelength generation at very low input pump power and broadband generation at sufficiently higher pump power has also been explored.

Effect of laser linewidth and fiber length on self-pulsing dynamics and output stabilization of single-mode Yb-doped double-clad fiber laser.

We report an experimental study of the effect of fiber length and laser linewidth on self-pulsing dynamics and output stabilization of a single-mode Yb-doped double-clad CW fiber laser. It is found that initiation of self-pulsing under low-level pumping conditions is due to relaxation oscillations and saturable absorption in the weakly pumped region of the doped fiber, irrespective of the fiber length and the laser linewidth. However, with an increase in pump power, depending on fiber length and laser linewidth, the pulses initiated due to relaxation oscillation get amplified, and result in short-duration giant pulses due to either stimulated Brillouin scattering (SBS) or stimulated Raman scattering (SRS). In the case of fiber lasers that employ a broadband mirror and wherein the fiber length is sufficient to reach the SRS threshold, the giant self-pulses are generated by SRS, whereas in the case of fiber lasers using a fiber Bragg grating, characterized by narrowband reflection and with sufficient fiber length to reach the SBS threshold, the giant self-pulses are generated by SBS. Output stabilization and, hence, elimination of self-pulsations can be achieved either by suppressing the relaxation oscillations with the addition of an appropriate length of a passive fiber to sufficiently increase the cavity photon lifetime, or by increasing the pump power to achieve gain uniformity along the doped fiber such that relaxation oscillations and reabsorption effects are suppressed.