Questionnaire survey on hands-on simulation training using a dental humanoid robot (SIMROID®).

INTRODUCTION: A dental humanoid robot, SIMROID®, is able to replicate the actions characteristic of human beings and enable training for communicating with patients and coping with unexpected situations. This study assessed user experiences via a survey questionnaire following hands-on training on the SIMROID®. MATERIALS AND METHODS: A total of 112 participants, consisting of 50 high school students who visited AUSD (Asahi University School of Dentistry) to participate in open campus events, 42 fourth-year students at AUSD and 20 dental students from Mexico State Autonomy University, University of Siena and Peking University took the survey. The participants observed the movements and reactions of a SIMROID® robot placed on a dental unit for approximately 20 min after which they completed a questionnaire survey. Both Japanese and English versions of the questionnaire were prepared for local and visiting foreign dental students. The questionnaire comprised 8 items, with a further two items for those undertaking dental training and an open comment field. RESULTS: All participants who observed the SIMROID® completed the questionnaire giving a 100% response rate. Generally, simulation training with SIMROID® was highly appreciated by all participants. The comprehensive evaluation score for SIMROID® was 4.56 ± 0.50 points for high school students, 4.05 ± 0.82 points for students at AUSD and 4.70 ± 0.47 points for foreign dental students, showing all participants had a very positive experience and impression of the SIMROID®. CONCLUSIONS: Therefore, simulation training using SIMROID® seems beneficial learning tool.

Bacterial adhesion and antibacterial property of coating materials containing theobromine and S-PRG filler.

Theobromine (TB) has been reported to promote tooth remineralization, strengthen tooth substance, and relieve dentin hypersensitivity. This study aimed to evaluate experimental tooth coating materials containing TB and surface pre-reacted glass-ionomer (S-PRG) fillers by examining the effects on bacterial adhesion and antibacterial properties. In addition, the amount of TB eluted from the coating material was measured. There was no significant difference in bacterial adhesion depending on the presence or absence of TB in the coating material, however, a significant decrease in the amount of bacterial adhesion was observed when S-PRG fillers were added to the coating material. The amount of eluted TB did not differ depending on the type of the filler in the coating material. It was suggested that TB could be used to develop a new dental material with the potential ability to inhibit the initiation and progression of dental caries.

Clinical assessment of resin-coating technique applied to exposed dentin after crown preparation.

The resin-coating technique, in which exposed dentin surfaces are covered using a thin-film coating material, was approved in the Japanese public health insurance system in December 2019. The purpose of this study was to evaluate clinical cases treated using the resin-coating technique with Hybrid Coat II (HC II) after tooth preparation on vital teeth. A total of 134 cases from patients who visited nine dental clinics were examined from the clinical records. Clinical signs and symptoms of cases before, during, and after treatment and at the time of recall were evaluated. The resin-coating was applied as either a single application with HC II (86.6%) or a combined application of HC II and a flowable resin composite (13.4%). The success rate without any symptoms of sensivity to cold water was 92.5% (124 cases). The current results indicated that the resin-coating with HC II is a reliable treatment for the tooth preparation of vital teeth.

Color changes in bulk-fill resin composites as a result of visible light-curing.

We evaluated twelve commercially available bulk-fill resin composites to determine the colorimetric changes that occurred as a result of the photo-polymerization reaction. Samples of the resin composites were prepared as disks 8 mm in diameter and 3 mm in thickness. A colorimeter was used to measure the color of samples on a black background before and after the polymerization processed had been initiated. As results, each of the photo-initiated bulk-fill resin composites tested except for Beautifil Bulk A showed a significant color difference more than that of conventional resin composites. Bulk Base Flow became darker, whereas Beautifil Bulk Flow became clearly lighter. All resin composites except for Bulk Base Flow became less yellow. Thus, Beautifil Bulk A exhibited the least color change among all the bulk-fill resin composites. However, this color change showed a marked change (NBS units) as observed by the human naked eye.

Use of new scratch test and tensile test for evaluation of bond strength of selfadhesive flowable resin composite for repair of artificial tooth erosion.

The purpose of this study was to use a new scratch test and tensile test to evaluate the bond strength between artificial erosive enamel or dentin and self-adhesive resin composites as a coating material. Coronal enamel or dentin surface was exposed to an erosive cycle (artificial saliva [AS], pH:7.0 for 6.5 h and acidic carbonated beverages for 5 min, alternated 3 times per day) for the eroded-surface or stored in AS for the remineralized-surface. Two self-adhesive flowable resin composites, Fusio and LLB-CR6 (prototype), and a conventional flowable resin composite, BEAUTIFIL FLOW with self-etching primer system, Clearfil Mega Bond, were applied to enamel or dentin surfaces; and then the bond strengths were measured. For the eroded-surface, there were no significant differences in bonding strength among all materials, as assessed by the new scratch test. Thus, these self-adhesive flowable resin composites might be useful for coating materials on acid-eroded tooth surfaces.

Relationship between thin-film bond strength as measured by a scratch test, and indentation hardness for bonding agents.

OBJECTIVES: To evaluate thin-film bond strength between a bonding agent and human dentin, using a scratch test, and the characteristics and accuracy of measurement. METHODS: One-step bonding agents (BeautiBond; Bond Force; Adper Easy Bond; Clearfil tri-S Bond) and two-step bonding agents (Cleafil SE Bond; FL-Bond II) were investigated in this study. Flat dentin surfaces were prepared for extracted human molars. The dentin surfaces were ground and bonding agents were applied and light cured. The thin-film bond strength test of the specimens was evaluated by the critical load at which the coated bonding agent failed and dentin appeared. The scratch mark sections were then observed under a scanning electron microscope. Indentation hardness was evaluated by the variation in depth under an applied load of 10gf. Data were compared by one-way ANOVA with the Scheffé's post hoc multiple comparison test (p<0.05). In addition, thin-film bond strength and indentation hardness were analyzed using analysis of correlation and covariance. RESULTS: The thin-film bond strength of two-step bonding agents were found to be significantly higher than that of one-step bonding agents with small standard deviations. Scratch marks consistently showed adhesive failure in the vicinity of the bonding agent/dentin interface. The indentation hardness showed a trend that two-step bonding agents have greater hardness than one-step bonding agents. A moderately significant correlation (r(2)=0.31) was found between thin-film bond strength and indentation hardness. SIGNIFICANCE: Thin-film bond strength test is a valid and reliable means of evaluating bond strength in the vicinity of the adhesive interface and is more accurate than other methods currently in use. Further, the thin-film bond strength is influenced by the hardness of the cued bonding agent.

Adherence of Streptococcus sanguinis and Streptococcus mutans to saliva-coated S-PRG resin blocks.

This in vitro study performed elemental analysis of the ions absorbed into the salivary coat covering the surfaces of S-PRG resin blocks and assessed the adherence of Streptococcus sanguinis and Streptococcus mutans to these saliva-coated S-PRG resin blocks. Elemental analysis of ions absorbed into the salivary coat of resin blocks exposed to the saliva was performed using an inductive coupled plasma atomic emission spectrometer and the fluoride electrode method. Quantitative adherence of radio-labeled test bacteria to the resin blocks was determined. As the results, the saliva-coated S-PRG resin showed significantly greater amounts of absorbed B, Al, Si, Sr, and F than the saliva-coated unfilled resin. It was of particular significance that the salivary coating of the S-PRG resin reduced the adherence of S. mutans to this resin. However, in the case of S. sanguinis, no significant difference in adherence could be recognized between saliva-coated S-PRG resin and saliva-coated unfilled resin.

Bond strengths of different orthodontic adhesives after enamel conditioning with the same self-etching primer.

AIM: To determine the shear bond strengths (SBS) of stainless steel brackets bonded with seven light-cured orthodontic adhesives after the enamel was conditioned with the same self-etching primer. METHODS: A total of 140 extracted human molars were randomly divided into seven groups (N = 20). In all the groups, the enamel was conditioned with Transbond Plus SEP (TPSEP). Stainless steel brackets were bonded with the following orthodontic adhesives: Group I, Transbond XT; Group II, Blugloo; Group III, BeautyOrtho Bond; Group IV, Enlight; Group V, Light Bond; Group VI, Transbond CC; Group VII, Xeno Ortho. The teeth were stored in distilled water at 37 degrees C for 24 hours and debonded with a universal testing machine. The modified adhesive remnant index (ARI) was also recorded. RESULTS: There were no significant differences in the SBS values among the groups: I (18.0 +/- 7.4 MPa); II (18.3 +/- 5.1 MPa); III (14.8 +/- 4.3 MPa); IV (18.3 +/- 7.0 MPa); V (16.4 +/- 4.3 MPa); VI (20.3 +/- 5.3 MPa); VII (15.9 +/- 6.4 MPa), but significant differences in ARI were found. CONCLUSIONS: The seven orthodontic adhesives evaluated in this study can be successfully used for bonding stainless steel brackets when the enamel is conditioned with TPSEP, however, the differences among some groups might influence the clinical bond strengths. In addition, the amount of residual adhesive remaining on the teeth after debonding differed among the adhesives. Further studies are required to better understand the differences in SBS and ARI.