Crystal Clear: Metal-Organic Frameworks Pioneering the Path to Future Drug Detox.

The growing number of acute drug abuse overdoses demands the development of innovative detoxification strategies for emergency purposes. In this study, an innovative approach for the application of porous Zr-based metal-organic frameworks for the treatment of acute overdoses of popular drugs of abuse including amphetamine, methamphetamine, cocaine, and MDMA is presented. A comprehensive approach determining the efficacy and the kinetics of drug removal, considering dosage, adsorption time, and adsorption mechanisms, was tested and corroborated with density functional theory (DFT) modeling. The experimental results showed high removal efficiency reaching up to 90% in the case of the application of the NU-1000 metal-organic framework. The difference Raman spectroscopy method presented in this study corroborated with DFT-based vibrational analysis allows the detection of drug adsorbed in the MOF framework even with as low a concentration as 5 mg/g. Additionally, the drug adsorption mechanisms were modeled with DFT, showing the π-π stacking in a vast majority of considered cases. The performance and influence on the living organisms were evaluated throughout the in vitro and in vivo experiments, indicating that Zr-based MOFs could serve as efficient, organic, safe drug adsorbents.

Structure Effects on Swelling Properties of Hydrogels Based on Sodium Alginate and Acrylic Polymers.

Hydrogels based on sodium alginate (SA) and partially neutralised poly(acrylic acid) were obtained by radical polymerisation. The hydrogels were cross-linked with N,N'-methylenebisacrylamide (MBA), simultaneously grafting the resulting polymer onto SA. The findings of the FTIR spectroscopy showed that all of the hydrogels were effectively synthesized and sodium alginate was chemically bonded with the poly(sodium acrylate) matrix. DSC analysis of the melting heat and glass transition parameters indicated that the hydrogel structure had changed as a result of the cross-linking process. Sodium alginate and MBA were tested at different concentrations to determine how they affected the hydrogel properties. A very high content of the biopolymer, i.e., sodium alginate, was used in our research, up to 33 wt%. This resulted in durable and stable hydrogels with a very high ability to uptake water, comparable to hydrogels based on synthetic polymers only. The ability to swell is inversely proportional to the quantity of MBA present. By increasing the amount of sodium alginate in the hydrogel, the ability of the hydrogel to absorb water is reduced. However, water uptake remains relatively high at 350 g·g-1, even for the hydrogel with the highest SA content.

Variously Prepared Zeolite Y as a Modifier of ANFO.

In the presented research, we investigated Ammonium Nitrate Fuel Oil (ANFO), with the addition of variously modified zeolite Y as an attractive explosive. Analysis of both blasting tests and thermodynamic models of blasting properties led to the conclusion that the addition of zeolite Y enhanced the detonation properties of such prepared ANFO via the growth of the detonation pressure, temperature, compression energy, and heat of the explosion. Generally, the modification of ANFO with variously prepared zeolite Y also reduced the volume of (COx + NOx) post-blast fumes. Furthermore, it was found that the ANFO's velocity of detonation (VOD) could be controlled by the choice of the way of zeolite Y modification. Namely, for zeolite Y without Mg, as well as Mg-Y prepared via the impregnation method, the VOD rose. The opposite effect was observed when ANFO was modified with Mg-Y, obtained from the deposition of Mg over zeolite Y via the ultrasonic-assisted procedure.

Nitrogen as a Probe Molecule for the IR Studies of the Heterogeneity of OH Groups in Zeolites.

One of the methods of IR studies of the heterogeneity of Si-OH-Al groups in zeolites is the investigation of the frequency shift of the band of free OH bands restored upon the adsorption of ammonia and subsequent desorption at increasing temperatures. We extended this method by following the shift of the band of the OH group interacting by hydrogen bonding with nitrogen. The advantage of nitrogen, compared with CO, which has been commonly used as a probe molecule in studies on hydrogen bonding, is that for nitrogen the frequency shift is smaller than for CO and therefore there is no overlapping of shifted OH band with the bands of ammonium ions. For zeolites NaHY, HMFI, and HBEA, the frequency shift of IR bands of both free and hydrogen-bonded Si-OH-Al with the increase of ammonia desorption temperature evidences the heterogeneity of these hydroxyls. On the other hand, in zeolite HFAU of Si/Al = 31, Si-OH-Al were found to be homogeneous. Heterogeneity of OH groups may be explained both by the presence of Si-OH-Al of various number of Al near the bridge and of Si-OH-Al of various geometry.

In Search of Effective UiO-66 Metal-Organic Frameworks for Artificial Kidney Application.

The removal of uremic toxins from patients with acute kidney injury is a key issue in improving the quality of life for people requiring peritoneal dialysis. The currently utilized method for the removal of uremic toxins from the human organism is hemodialysis, performed on semipermeable membranes where the uremic toxins, along with small molecules, are separated from proteins and blood cells. In this study, we describe a mixed-linker modulated synthesis of zirconium-based metal-organic frameworks for efficient removal of uremic toxins. We determined that the efficient adsorption of uremic toxins is achieved by optimizing the ratio between -amino functionalization of the UiO-66 structure with 75% of -NH2 groups within organic linker structure. The maximum adsorption of hippuric acid and 3-indoloacetic acid was achieved by UiO-66-NH2 (75%) and by UiO-66-NH2 (75%) 12.5% HCl prepared by modulated synthesis. Furthermore, UiO-66-NH2 (75%) almost completely adsorbs 3-indoloacetic acid bound to bovine serum albumin, which was used as a model protein to which uremic toxins bind in the human body. The high adsorption capacity was confirmed in recyclability test, which showed almost 80% removal of 3-indoloacetic acid after the third adsorption cycle. Furthermore, in vitro cytotoxicity tests as well as hemolytic activity assay have proven that the UiO-66-based materials can be considered as potentially safe for hemodialytic purposes in living organisms.

Oxidation of Ethanol in Cu-Faujasites Studied by IR Spectroscopy.

In this study, IR studies of the coadsorption of ethanol and CO on Cu+ cations evidenced the transfer of electrons from ethanol to Cu+, which caused the lowering of the frequency of the band attributed to CO bonded to the same Cu+ cation due to the more effective π back donation of d electrons of Cu to antibonding π* orbitals of CO. The reaction of ethanol with acid sites in zeolite HFAU above 370 K produced water and ethane, polymerizing to polyethylene. Ethanol adsorbed on zeolite Cu(2)HFAU containing acid sites and Cu+exch also produced ethene, but in this case, the ethene was bonded to Cu+ and did not polymerize. C=C stretching, which is IR non-active in the free ethene molecule, became IR active, and a weak IR band at 1538 cm-1 was present. The reaction of ethanol above 370 K in Cu(5)NaFAU zeolite (containing small amounts of Cu+exch and bigger amounts of Cu+ox, Cu2+exch and CuO) produced acetaldehyde, which was further oxidized to the acetate species (CH3COO-). As oxygen was not supplied, the donors of oxygen were the Cu species present in our zeolite. The CO and NO adsorption experiments performed in Cu-zeolite before and after ethanol reaction evidenced that both Cu+ox and Cu2+ (Cu2+exch and CuO) were consumed by the ethanol oxidation reaction. The studies of the considered reaction of bulk CuO and Cu2O as well as zeolites, in which the contribution of Cu+ox species was reduced by various treatments, suggest that ethanol was oxidized to acetaldehyde by Cu2+ox (the role of Cu+ox could not be elucidated), but Cu+ox was the oxygen donor in the acetate formation.

On the Role of Protonic Acid Sites in Cu Loaded FAU31 Zeolite as a Catalyst for the Catalytic Transformation of Furfural to Furan.

The aim of the present paper is to study the speciation and the role of different active site types (copper species and Brønsted acid sites) in the direct synthesis of furan from furfural catalyzed by copper-exchanged FAU31 zeolite. Four series of samples were prepared by using different conditions of post-synthesis treatment, which exhibit none, one or two types of active sites. The catalysts were characterized by XRD, low-temperature sorption of nitrogen, SEM, H2-TPR, NMR and by means of IR spectroscopy with ammonia and CO sorption as probe molecules to assess the types of active sites. All catalyst underwent catalytic tests. The performed experiments allowed to propose the relation between the kind of active centers (Cu or Brønsted acid sites) and the type of detected products (2-metylfuran and furan) obtained in the studied reaction. It was found that the production of 2-methylfuran (in trace amounts) is determined by the presence of the redox-type centers, while the protonic acid sites are mainly responsible for the furan production and catalytic activity in the whole temperature range. All studied catalysts revealed very high susceptibility to coking due to polymerization of furfural.

Cracking the Chloroquine Conundrum: The Application of Defective UiO-66 Metal-Organic Framework Materials to Prevent the Onset of Heart Defects-In Vivo and In Vitro.

In this study, we present a modulated synthesis nanocrystalline defective UiO-66 metal-organic framework as a potential chloroquine diphosphate (CQ) delivery system. Increasing the concentration of hydrochloric acid during the modulated synthesis resulted in a considerable increase of pore volume, which enhanced the CQ loading in CQ@UiO-66 composites. Drug release tests for CQ@UiO-66 composites have confirmed prolonged CQ release in comparison with pure CQ. In vivo tests on a Danio reiro model organism have revealed that CQ released from CQ@UiO-66 25% showed lower toxicity and fewer cardiotoxic effects manifested by cardiac malformations and arrhythmia in comparison to analogous doses of CQ. Cytotoxicity tests proved that the CQ loaded on the defective UiO-66 cargo resulted in increased viability of cardiac cells (H9C2) as compared to incubation with pure CQ. The experimental results presented here may be a step forward in the context of reducing the cardiotoxicity CQ.

Swelling of Hydrogels Based on Carboxymethylated Starch and Poly(Acrylic Acid): Nonlinear Rheological Approach.

In this paper, the authors discuss the results of research on the preparation and properties of superabsorbent hydrogels based on carboxymethylated high-amylose corn starches. They were obtained by graft copolymerisation (in an aqueous environment) of acrylic acid and its sodium salt onto modified starches (with various substitution degrees DS = 0.2 and 0.8), using potassium persulfate as an initiator and N,N'-methylenebisacrylamide (MBA) as a cross-linker. Modified starches, with various DS, were used to synthesise two series of hydrogels with varying molar ratios of cross-linkers to monomers. The swelling behaviour of hydrogels was studied and their properties were estimated using the kinetic equation. The occurrence of starch-polyacrylic acid covalent interactions was demonstrated by FTIR analysis. Nonlinear rheological methods have proved to be very effective in assessing the mechanical properties of hydrogels. LAOS (large -amplitude oscillatory shear) analysis allowed the determination of the durability of the gel structure as a function of the amount of absorbed water.

Reduction and Oxidation of Cu Species in Cu-Faujasites Studied by IR Spectroscopy.

The process of reduction (by hydrogen and ethanol) and oxidation (by oxygen and NO) of Cu sites in dealuminated faujasite-type zeolites (of Si/Al = 31) was studied by infrared (IR) spectroscopy with CO (for Cu+) and NO (for Cu2+) as probe molecules. Two zeolites were studied: one of them contained mostly Cu+exch., whereas another one contained mostly Cu2+ and Cu+ox. The susceptibility of various forms of Cu for reduction were investigated. IR experiments of CO sorption evidenced that Cu+ox. was more prone for the reduction than Cu+exch. According to NO sorption studies, Cu2+exch. was reduced in the first order before Cu2+ox. Ethanol reduced mostly Cu2+ and, also, some amounts of Cu+. The treatment with oxygen caused the oxidation of Cu+ (both Cu+exch. and Cu+ox.) to Cu2+. The adsorption of NO at 190K produced Cu+(NO)2 dinitrosyls, but heating to room temperature transformed dinitrosyls to mononitrosyls and increased the Cu2+ content.

Sonically modified hierarchical FAU-type zeolites as active catalysts for the production of furan from furfural.

In this study, the sonochemical-assisted desilication method was applied as a special and innovative way of preparing hierarchical zeolites. The physicochemical properties of the hierarchical zeolites prepared using the sonochemical route were compared with those prepared using the conventional desilication method. Commercial zeolite with FAU-type structure was desilicated with a sodium and tetrabutylammonium hydroxide aqueous solution (NaOH/TBAOH) for 30 min. The ultrasound treatment process was performed using a QSonica Q700 sonicator (Church Hill Rd, Newtown, CT, USA) equipped with a ½â€³ diameter horn. The average power of sonication was 60 W, and the frequency was 20 kHz. During the sonication procedure, the alkaline solution with the catalyst precursor and sonicator probe were placed in an ice bath to keep them at room temperature. The prepared catalyst samples were examined by ICP-OES, XRD, SEM, NMR, and nitrogen sorption techniques. The acidic properties of the prepared hierarchical zeolite samples were assessed by means of IR spectroscopy with ammonia and carbon monoxide sorption as probe molecules. All catalysts were studied in the decarbonylation of furfural into furan. Independently of the application of ultrasonic irradiation, desilication of zeolites with an NaOH/TBAOH mixture extracts comparable amounts of silicon, resulting in comparable crystallinity and acidity. On the other hand, the samples prepared in the presence of ultrasounds revealed higher both mesoporosity and enhanced catalytic properties in the reaction of decarbonylation of furfural into furan in comparison with their counterparts prepared using the conventional method.

IR Studies of the Cu Ions in Cu-Faujasites.

The properties of Cu ions in dealuminated faujasite-type zeolites (Si/Al = 31) containing 1, 2, and 5 wt.% of Cu were investigated by IR spectroscopy with CO and NO as probe molecules. Cu was introduced by impregnation into zeolites in both protonic (HFAU) and sodium (NaFAU) forms of zeolite. Four kinds of Cu species were found: Cu+exch., Cu+oxide, Cu2+exch. (square, planar, and square pyramidal), and Cu2+oxide (CuO). The proportions between these four kinds of Cu depended on the amount of Cu and on the form of zeolite to which Cu was introduced (HFAU or NaFAU). Zeolites with 1 wt.% of Cu introduced to HFAU (denoted as Cu(1)HFAU) contained only Cu+exch., whereas other forms of Cu were present in zeolites of higher Cu contents. The concentration of Cu+exch. was determined by quantitative IR studies of CO adsorption. According to the IR results, some Cu ions were situated inside hexagonal prisms and/or cuboctahedra, and were inaccessible to adsorbed molecules. IR studies also evidenced that Cu ions in oxide forms-Cu+oxide and Cu2+oxide (CuO)-were better electron donors than Cu in exchange positions (Cu+exch. and Cu2+exch).

Synthesis and Effect of Structure on Swelling Properties of Hydrogels Based on High Methylated Pectin and Acrylic Polymers.

The aim of the research was to develop new pectin-based hydrogels with excellent swelling properties. Superabsorbent hydrogels composed of high methylated pectin and partially neutralized poly(acrylic acid) was obtained by free radical polymerization in aqueous solution in the presence of crosslinking agent-N,N'-methylenebisacrylamide. The effect of crosslinker content and pectin to acrylic acid ratio on the swelling properties of hydrogels was investigated. In addition, the thermodynamic characteristic of hydrogels was obtained by DSC. Furthermore, the structure of pectin-based hydrogels was characterized by FTIR and GPC. It was also proved that poly(acrylic acid) is grafted on pectin particles. The results showed that introduction of small amount of pectin (up to 6.7 wt %) to poly(acrylic acid) hydrogel increase the swelling capacity, while further increasing of pectin ratio cause decrease of swelling.

Hydroxyl Groups of Exceptionally High Acidity in Desilicated Zeolites Y.

The desilication of dealuminated zeolite Y in NaOH/tetrabutylammonium hydroxide mixtures produces hierarchical zeolite Y containing a micropore system as well as mesopores of significant volume and surface. IR studies evidenced that a new kind of hydroxyls was formed if desilication was realized above 318 K. This new kind of acidic hydroxyls is characterized by IR band at 3600 cm-1 . IR studies showed, that these new hydroxyls showed extremely high acidity. This was evidenced by very high frequency shifts of IR bands of OH interacting with probe molecules: CO and N2 : Δ ν O H · · · C O =411 cm-1 and Δ ν O H · · · N 2 =164 cm-1 , resp. These frequency shift are the highest in all the chemistry of zeolites including very strongly acidic dealuminated mazzite and steamed zeolite USY ( Δ ν O H · · · C O =ca. 380 cm-1 ) indicating that 3600 cm-1 hydroxyls are the most acidic in all the zeolites.

DeNOx Abatement over Sonically Prepared Iron-Substituted Y, USY and MFI Zeolite Catalysts in Lean Exhaust Gas Conditions.

Iron-substituted MFI, Y and USY zeolites prepared by two preparation routes-classical ion exchange and the ultrasound modified ion-exchange method-were characterised by micro-Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and ultraviolet (UV)/visible diffuse reflectance spectroscopy (UV/Vis DRS). Ultrasound irradiation, a new technique for the preparation of the metal salt suspension before incorporation to the zeolite structure, was employed. An experimental study of selective catalytic reduction (SCR) of NO with NH3 on both iron-substituted reference zeolite catalysts and those prepared through the application of ultrasound conducted during an ion-exchange process is presented. The prepared zeolite catalysts show high activity and selectivity in SCR deNOx abatement. The MFI-based iron catalysts, especially those prepared via the sonochemical method, revealed superior activity in the deNOx process, with almost 100% selectivity towards N2. The hydrothermal stability test confirmed high stability and activity of MFI-based catalysts in water-rich conditions during the deNOx reaction at 450 °C.

IR and NMR studies of hierarchical material obtained by the treatment of zeolite Y by ammonia solution.

Ammonia treatment of ultrastable zeolite Y has a great impact on its features. XRD showed a partial loss of crystallinity coupled with a loss of long-distance zeolite ordering. However, a typical short-range zeolite ordering, in the light of 29Si NMR studies, was largely preserved. 27Al MAS NMR spectra evidenced that most of Al was located in zeolitic tetrahedral positions, but some of them adopted a distorted configuration. Evolution of zeolites acidity was followed quantitatively by using IR. In particular, such studies revealed the presence of strongly acidic SiOHAl groups. IR studies suggest also heterogeneity of these OH groups. The heterogeneity of SiOHAl groups was a consequence of the less ordered structure of zeolites treated with ammonia solutions. It was also found that the treatment with ammonia solutions yields hierarchical material. The samples revealed promising catalytic properties in the liquid phase isomerization of α-pinene. Zeolites desilicated with ammonia may constitute an inexpensive route yielding viable hierarchical catalysts.

Non-Noble Metal Oxide Catalysts for Methane Catalytic Combustion: Sonochemical Synthesis and Characterisation.

The aim of this study was to obtain nanocrystalline mixed metal-oxide-ZrO2 catalysts via a sonochemically-induced preparation method. The effect of a stabiliser's addition on the catalyst parameters was investigated by several characterisation methods including X-ray Diffraction (XRD), nitrogen adsorption, X-ray fluorescence (XRF), scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometer (EDS), transmission electron microscopy (TEM) and µRaman. The sonochemical preparation method allowed us to manufacture the catalysts with uniformly dispersed metal-oxide nanoparticles at the support surface. The catalytic activity was tested in a methane combustion reaction. The activity of the catalysts prepared by the sonochemical method was higher than that of the reference catalysts prepared by the incipient wetness method without ultrasonic irradiation. The cobalt and chromium mixed zirconia catalysts revealed their high activities, which are comparable with those presented in the literature.