Charge-driven liquid-crystalline behavior of ligand-functionalized nanorods in apolar solvent.

Concentrated colloidal suspensions of nanorods often exhibit liquid-crystalline (LC) behavior. The transition to a nematic LC phase, with long-range orientational order of the particles, is usually well-captured by Onsager's theory for hard rods, at least qualitatively. The theory shows how the volume fraction at the transition decreases with increasing aspect ratio of the rods. It also explains that the long-range electrostatic repulsive interaction occurring between rods stabilized by their surface charge can significantly increase their effective diameter, resulting in a decrease in the volume fraction at the transition, as compared to sterically stabilized rods. Here, we report on a system of ligand-stabilized LaPO4 nanorods, of aspect ratio ≈ 11, dispersed in apolar medium exhibiting the counter-intuitive observation that the onset of nematic self-assembly occurs at an extremely low volume fraction of ≈ 0.25%, which is lower than observed (≈ 3%) with the same particles when charged-stabilized in polar solvent. Furthermore, the nanorod volume fraction at the transition increases with increasing concentration of ligands, in a similar way as in polar media where increasing the ionic strength leads to surface charge screening. This peculiar system was investigated by dynamic light scattering, Fourier-transform infrared spectroscopy, zetametry, electron microscopy, polarized light microscopy, photoluminescence measurements, and X-ray scattering. Based on these experimental data, we formulate several tentative scenarios that might explain this unexpected phase behavior. However, at this stage, its full understanding remains a pending theoretical challenge. Nevertheless, this study shows that dispersing anisotropic nanoparticles in an apolar solvent may sometimes lead to spontaneous ordering events that defy our intuitive ideas about colloidal systems.

Vectorial probing of electric and magnetic transitions in variable optical environments and vice-versa.

We use europium doped single crystalline NaYF4nanorods for probing the electric and magnetic contributions to the local density of optical states (LDOS). Reciprocically, we determine intrinsic properties of the emitters (oscillator strength, quantum yield) by comparing their measured and simulated optical responses in front of a mirror. We first experimentally determine the specifications of the nanoprobe (orientation and oscillator strength of the electric and magnetic dipoles moments) and show significant orientation sensitivity of the branching ratios associated with electric and magnetic transitions. In a second part, we measure the modification of the LDOS in front of a gold mirror in a Drexhage's experiment. We discuss the role of the electric and magnetic LDOS on the basis of numerical simulations, taking into account the orientation of the dipolar emitters. We demonstrate that they behave like degenerated dipoles sensitive to polarized partial LDOS.

Measuring the order parameter of vertically aligned nanorod assemblies.

Vertically aligned nanorod assemblies are of great interest both for fundamental studies of anisotropic physical properties arising from the structures and for the development of functional devices utilizing such anisotropic characteristics. Simultaneous measurement of the homeotropic order parameter (Shomeo) of assemblies in dynamic states can allow further optimization of the assembly process and the device performance. Although many techniques (e.g. birefringence measurement, SAXS analysis, and high-resolution microscopy) have been proposed to characterise Shomeo, these do not yet meet the essential criteria such as for rapid, in situ and non-destructive analyses. Here, we propose a novel approach employing a unique photoluminescence behaviour of lanthanide-doped crystalline nanorods, of which the emission spectrum contains the detailed information on the structure of the assembly. We demonstrate a rapid in situ determination of Shomeo of Eu3+-doped NaYF4 nanorods of which the orientation is controlled under an external electric field. The method does not require the consideration of polarization and can be performed using a conventional fluorescence microscopy setup. This new methodology would provide a more in-depth examination of various assembled nanostructures and the collective dynamics of their building blocks.

Measuring 3D orientation of nanocrystals via polarized luminescence of rare-earth dopants.

Orientation of nanoscale objects can be measured by examining the polarized emission of optical probes. To retrieve a three-dimensional (3D) orientation, it has been essential to observe the probe (a dipole) along multiple viewing angles and scan with a rotating analyzer. However, this method requires a sophisticated optical setup and is subject to various external sources of error. Here, we present a fundamentally different approach employing coupled multiple emission dipoles that are inherent in lanthanide-doped phosphors. Simultaneous observation of different dipoles and comparison of their relative intensities allow to determine the 3D orientation from a single viewing angle. Moreover, the distinct natures of electric and magnetic dipoles originating in lanthanide luminescence enable an instant orientation analysis with a single-shot emission spectrum. We demonstrate a straightforward orientation analysis of Eu3+-doped NaYF4 nanocrystals using a conventional fluorescence microscope. Direct imaging of the rod-shaped nanocrystals proved the high accuracy of the measurement. This methodology would provide insights into the mechanical behaviors of various nano- and biomolecular systems.

NaYF4 Microstructure, beyond Their Well-Shaped Morphology.

Lanthanide-doped nanoparticles are widely investigated for their optical properties. However, the sensitivity of the lanthanide ions' luminescence to the local symmetry, useful when investigating structural environments, becomes a drawback for optimized properties in the case of poorly controlled crystallinity. In this paper, we focus on ß -NaYF4 nanorods in order to provide a detailed description of their chemical composition and microstructure. The combination of detailed XRD analysis and TEM observations show that strong variation may be observed from particles from a same batch of synthesis, but also when considering small variations of synthesis conditions. Moreover, also the nanorods observed by SEM exhibit a very nice faceted shape, they are far from being monocrystalline and present significant local deviation of crystalline symmetry and orientation. All these structural considerations, sensitively probed by polarized emission analysis, are crucial to analyze for the development of optimal systems toward the targeted applications.

Electric field induced birefringence in non-aqueous dispersions of mineral nanorods.

Lanthanum phosphate (LaPO4) nanorods dispersed in the non-aqueous solvent of ethylene glycol form a system exhibiting large intrinsic birefringence, high colloidal stability and the ability to self-organize into liquid crystalline phases. In order to probe the electro-optical response of these rod dispersions we study here the electric-field-induced birefringence, also called Kerr effect, for a concentrated isotropic liquid state with an in-plane a.c. sinusoidal electric field, in conditions of directly applied (electrodes in contact with the sample) or externally applied (electrodes outside the sample cell) fields. Performing an analysis of the electric polarizability of our rod-like particles in the framework of Maxwell-Wagner-O'Konski theory, we account quantitatively for the coupling between the induced steady-state birefringence and the electric field as a function of the voltage frequency for both sample geometries. The switching time of this non-aqueous transparent system has been measured, and combined with its high Kerr coefficients and its features of optically isotropic "off-state" and athermal phase behavior, this represents a promising proof-of-concept for the integration of anisotropic nanoparticle suspensions into a new generation of electro-optical devices.

Optically anisotropic thin films by shear-oriented assembly of colloidal nanorods.

Device-scale thin films of highly oriented (in-plane) colloidal nanorods are made available by using a simple coating process involving thixotropic rod gel suspensions. Application of this process to LaPO4 nanorods leads to films exhibiting outstanding anisotropic optical properties, such as a remarkably large birefringence (Δn = 0.13) associated with high transparency, and sharply polarized fluorescence spectra when doped with europium.

Influence of the molecular design on the antifouling performance of poly(ethylene glycol) monolayers grafted on (111) Si.

Various poly(ethylene glycol) monomethyl ether moieties were grafted onto hydrogenated silicon surfaces in order to investigate the influence of the molecular design on the antifouling performance of such coatings. The grafted chains were either oligo(ethylene oxide) chains (EG)(n)OMe bound to silicon via Si-O-C covalent bonds, or hybrid alkyl/oligo(ethylene oxide) chains C(p)(EG)(n)OMe bound via Si-C covalent bonds (from home-synthesized precursors). Quantitative IR spectroscopy gave the molecular coverage of the grafted layers, and AFM imaging demonstrated that a proper surfactinated rinse yields C(p)(EG)(n)OMe layers free of unwanted residues. The protein-repellent character of these grafted layers (here, toward BSA) was studied by IR and AFM imaging. C(p)(EG)(n)OMe layers exhibit a lower surface concentration than (EG)(n)OMe layers, because of the presence of a solvent in the grafting solution; they however demonstrate high resistance against BSA adsorption for high values of the n/p ratio and a higher stability than (EG)(n)OMe. This behavior is consistently explained by the poor ordering capability of the alkyl part of the layer, contrary to what is observed for similar layers on Au, and the key role of an entangled arrangement of the ethylene oxide chains which forms when these chains are long enough.

Organic functionalization of luminescent oxide nanoparticles toward their application as biological probes.

Luminescent inorganic nanoparticles are now widely studied for their applications as biological probes for in vitro or in vivo experiments. The functionalization of the particles is a key step toward these applications, since it determines the control of the coupling between the particles and the biological species of interest. This paper is devoted to the case of rare earth doped oxide nanoparticles and their functionalization through their surface encapsulation with a functional polysiloxane shell. The first step of the process is the adsorption of silicate ions that will act as a primary layer for the further surface polymerization of the silane, either aminopropyltriethoxysilane (APTES) or glycidoxypropyltrimethoxysilane (GPTMS). The amino- or epoxy- functions born by the silane allow the versatile coupling of the particles with bio-organic species following the chemistry that is commonly used in biochips. Special attention is paid to the careful characterization of each step of the functionalization process, especially concerning the average number of organic functions that are available for the final coupling of the particles with proteins. The surface density of amino or epoxy functions was found to be 0.4 and 1.9 functions per square nanometer for GPTMS and APTES silanized particles, respectively. An example of application of the amino-functionalized particles is given for the coupling with alpha-bungarotoxins. The average number (up to 8) and the distribution of the number of proteins per particle are given, showing the potentialities of the functionalization process for the labeling of biological species.