Hybrid Zn-ß-Aminoporphyrin-Carbon Nanotubes: Pyrrolidine and Direct Covalent Linkage Recognition, and Multiple-Photo Response.

To unveil and shape the molecular connectivity in (metallo)porphyrin-carbon nanotube hybrids are of main relevance for the multiple medicinal, photoelectronic, catalytic, and photocatalytic applications of these materials. Multi-walled carbon nanotubes (MWCNTs) were modified through 1,3-dipolar cycloaddition reactions with azomethine ylides generated in situ and carrying pentafluorophenyl groups, followed by immobilization of the ß-amino-tetraphenylporphyrinate Zn(II). The functionalities were confirmed via XPS and FTIR, whereas Raman spectroscopy showed disruptions on the graphitic carbon nanotube surface upon both steps. The functionalization extension, measured via TGA mass loss and corroborated via XPS, was 0.2 mmol·g-1. Photophysical studies attest to the presence of the different porphyrin-carbon nanotube connectivity in the nanohybrid. Significantly different emission spectra and fluorescence anisotropy of 0.15-0.3 were observed upon variation of excitation wavelength. Vis-NIR absorption and flash photolysis experiments showed energy/charge transfer in the photoactivated nanohybrid. Moreover, evidence was found for direct reaction of amino groups with a carbon nanotube surface in the presence of molecular dipoles such as the zwitterionic sarcosine amino acid.

Lanthanide-Based Organic Salts: Synthesis, Characterization, and Cytotoxicity Studies.

The formulation of magnetic ionic liquids (MILs) or organic salts based on lanthanides as anions has been explored. In this work, a set of choline-family-based salts, and two other, different cation families, were combined with Gadolinium(III) and Terbium(III) anions. Synthetic methodologies were previously optimized, and all organic salts were obtained as solids with melting temperatures higher than 100 °C. The magnetic moments obtained for the Gd(III) salts were, as expected, smaller than those obtained for the Tb(III)-based compounds. The values for Gd(III) and Tb(III) magnetic salts are in the range of 6.55-7.30 MB and 8.22-9.34 MB, respectively. It is important to note a correlation between the magnetic moments obtained for lanthanides, and the structural features of the cation. The cytotoxicity of lanthanide-based salts was also evaluated using 3T3, 293T, Caco2, and HepG2 cells, and it was revealed that most of the prepared compounds are not toxic.

Parylene-Sealed Perovskite Nanocrystals Down-Shifting Layer for Luminescent Spectral Matching in Thin Film Photovoltaics.

The present contribution aims to enhance solar cells' performance via the development of advanced luminescent down-shifting based on encapsulated nanostructured perovskite materials. Here, thin films of inorganic lead halide (CsPbBr3) perovskite nanocrystal luminophores were synthetized, by hot-injection, deposited on glass substrates by spin-coating, and encapsulated with parylene type C, via chemical vapor deposition, to protect and stabilize the films. The optical properties of these thin films were characterized by absorption, emission and 2D contour spectra, their structure by X-ray diffraction and X-ray photoelectron spectroscopy, and the morphology by Scanning Transmission Electron microscopy. I-V curve and spectral response nanocrystalline silicon photovoltaic (nc-Si:H PV) cells were studied in the absence and presence of the perovskite and parylene luminescent down-shifting layers. The incorporation of the CsPbBr3 nanocrystals and their encapsulation with the parylene type C polymeric coating led to an increase in the current generated and the spectral response of the PV cells in the regime of the nanocrystals' fluorescence emission. A 3.1% increase in the short circuit current density and a 5.6% increase in the power conversion efficiency were observed.

Dinuclear Cu(I) Halides with Terphenyl Phosphines: Synthesis, Photophysical Studies, and Catalytic Applications in CuAAC Reactions.

Several dinuclear terphenyl phosphine copper(I) halide complexes of composition [CuX(PR2Ar')]2 (X = Cl, Br, I; R = hydrocarbyl, Ar' = 2,6-diarylterphenyl radical), 1-5, have been isolated from the reaction of CuX with 1 equiv of the phosphine ligand. Most of them have been characterized by X-ray diffraction studies in the solid state, thus allowing comparative discussions of different structural parameters, namely, Cu···Cu and Cu···Aryl separations, conformations adopted by coordinated phosphines, and planarity of the Cu2X2 cores. Centrosymmetric complexes [CuI(PMe2ArXyl2)]2, 1c, and [CuI(PEt2ArMes2)]2, 3c, despite their similar structures, show very distinct photoluminescence (PL) in powder form at room temperature. The photophysical behavior of these compounds in liquid solution, solid-solid Zeonex solution and powder samples at room temperature and 77 K have been investigated and supported by DFT calculation. Identification of vibronic coupling modes, done by group theory calculations and the technique of projection operators, shows that the manifestation of these modes is conditioned by crystal packing. Complexes [CuI(PMe2ArXyl2)]2, 1c, and [CuI(PEt2ArMes2)]2, 3c, display remarkable activity in copper-catalyzed azide-alkyne cycloaddition reactions involving preformed and in situ-made azides. Reactions are performed in H2O, under aerobic conditions, with low catalyst loadings and tolerate the use of iodoalkynes as substrates.

A Europium(III) Complex with an Unusual Anion-Cation Interaction: A Luminescent Molecular Thermometer for Ratiometric Temperature Sensing.

An unusual thermally sensitive anion-cation interaction, which is characteristic of the anion [Eu(FOD)4 ]- , occurs in the complex [CHOL][Eu(FOD)4 ] (1; CHOL=choline; FOD=1,1,1,2,2,3,3-heptafluoro-7,7-dimethyl-4,6-octanedionate) and affects both quantum yield and thermochromic behavior. This prompted the design of an Eu3+ -based ratiometric thermometer that functions at temperatures up to 95 °C through a thermally excited state absorption of the Eu3+ ion. The reusable temperature-sensitive luminescent complex showed a range of relative sensitivity between 0.45 % C-1 at 25 °C, with an increase to 7.0 % C-1 at 95 °C. Confinement of compound 1 in a transparent film of polysulfone resulted in a higher thermal stability of 1 while its luminescence showed a strong temperature dependence.

Tunable white emission of silver-sulfur-zeolites as single-phase LED phosphors.

Metal clusters confined inside zeolite materials display remarkable luminescent properties, making them very suitable as potential alternative phosphors in white LED applications. However, up to date, only single-color emitters have been reported for luminescent metal-exchanged zeolites. In this study, we synthesized and characterized white emitting silver-sulfur zeolites, which show a remarkable color tunability upon the incorporation of silver species in highly luminescent sulfur-zeolites. Via a combined steady-state and time-resolved photoluminescence spectroscopy characterization, we suggest that the observed luminescence and tunability arise from the presence of two different species. The first associated to an orange-red emitting silver cluster (Ag-CL), whereas the second is related to a blue-white emitting S-Ag-species. The relative contribution of both luminescent species depends on the synthesis procedure. It was shown that the formation of the blue-white emitting S-Ag-species is favored upon a heat-treatment of the samples.

Extreme Enhancement of Single-Molecule Fluorescence from Porphyrins Induced by Gold Nanodimer Antennas.

Porphyrins are typically weak emitters, which presents challenges to their optical detection by single-molecule fluorescence microscopy. In this contribution, we explore the enhancement effect of gold nanodimer antennas on the fluorescence of porphyrins in order to enable their single-molecule optical detection. Four meso-substituted free-base porphyrins were evaluated: two cationic, one neutral, and one anionic porphyrin. The gold nanodimer antennas are able to enhance the emission from these porphyrins by a factor of 105-106 increase in the maximum detected photon rates. This extreme enhancement is due to the combination of an antenna effect on the excitation rate that is estimated to be above 104-fold and an emission efficiency that corresponds to an increase of 2-10 times in the porphyrin's fluorescence quantum yield.

A Visible-Near-Infrared Light-Responsive Host-Guest Pair with Nanomolar Affinity in Water.

The discovery of stimuli-responsive high affinity host-guest pairs with potential applications under biologically relevant conditions is a challenging goal. This work reports a high-affinity 1:1 complex formed between cucurbit[8]uril and a water-soluble photochromic diarylethene derivative. It was found that, by confining the open isomer within the cavity of the receptor, a redshift in the absorption spectrum and an enhancement of the photocyclization quantum yield from Φ=0.04 to Φ=0.32 were induced. This improvement in the photochemical performance enables quantitative photocyclization with visible light that, together with the near-infrared light-induced ring-opening reaction and the 100-fold selectivity for the closed isomer, confirms this as an outstanding light-responsive affinity pair.

Small phospho-donors phosphorylate MorR without inducing protein conformational changes.

Phosphorylation is an essential mechanism of protein control and plays an important role in biology. The two-component system (TCS) is a bacterial regulation mechanism mediated by a response regulator (RR) protein and a kinase protein, which synchronize the regulatory circuit according to the environment. Phosphorylation is a key element in TCS function as it controls RR activity. In the present study, we characterize the behavior of MorR, an RR associated with Mo homeostasis, upon acetylphosphate and phosphoramidate treatment in vitro. Our results show that MorR was phosphorylated by both phospho-donors. Fluorescence experiments showed that MorR tryptophan emission is quenched by phosphoramidate. Furthermore, theoretical and computational results demonstrate that phosphorylation by phosphoramidate is more favorable than that by acetylphosphate. In conclusion, phosphorylated MorR is a monomeric protein and phosphorylation does not appear to induce observable conformational changes in the protein structure.

Sulfur dioxide induced aggregation of wine thaumatin-like proteins: Role of disulfide bonds.

Aggregation of heat unstable wine proteins is responsible for the economically and technologically detrimental problem called wine protein haze. This is caused by the aggregation of thermally unfolded proteins that can precipitate in bottled wine. To study the influence of SO2 in this phenomenon, wine proteins were isolated and thaumatins were identified has the most prone to aggregate in the presence of this compound. Isolated wine thaumatins aggregation was followed by dynamic light scattering (DLS), circular dichroism (CD), fluorescence spectroscopy and size exclusion chromatography (SEC). Our experimental results demonstrate that protein thermal unfolding after exposure of the protein to 70 °C does not present differences whether SO2 is present or not. Conversely, when the protein solution is cooled to 15 °C (after heat stress) significant analytical changes can be observed between samples with and without SO2. A remarkable change of circular dichroism spectra in the region 220-230 nm is observed (which can be related to S-S torsion angles), as well as an increase in tryptophan fluorescence intensity (absence of fluorescence quenching by S-S bonds). Formation of covalently-linked dimeric and tetrameric protein species were also detected by SEC. The ability to dissolve the aggregates with 8 M urea seems to indicate that hydrophobic interactions are prevalent in the formed aggregates. Also, the reduction of these aggregates with tris (2-carboxyethyl) phosphine (TCEP) to only monomeric species reveals the presence of intermolecular S-S bonds.

Hybrid Copper-Nanowire-Reduced-Graphene-Oxide Coatings: A "Green Solution" Toward Highly Transparent, Highly Conductive, and Flexible Electrodes for (Opto)Electronics.

This study reports a novel green chemistry approach to assemble copper-nanowires/reduced-graphene-oxide hybrid coatings onto inorganic and organic supports. Such films are robust and combine sheet resistances (<30 Ω sq-1 ) and transparencies in the visible region (transmittance > 70%) that are rivalling those of indium-tin oxide. These electrodes are suitable for flexible electronic applications as they show a sheet resistance change of <4% after 10 000 bending cycles at a bending radius of 1.0 cm, when supported on polyethylene terephthalate foils. Significantly, the wet-chemistry method involves the preparation of dispersions in environmentally friendly solvents and avoids the use of harmful reagents. Such inks are processed at room temperature on a wide variety of surfaces by spray coating. As a proof-of-concept, this study demonstrates the successful use of such coatings as electrodes in high-performance electrochromic devices. The robustness of the electrodes is demonstrated by performing several tens of thousands of cycles of device operation. These unique conducting coatings hold potential for being exploited as transparent electrodes in numerous optoelectronic applications such as solar cells, light-emitting diodes, and displays.

pH-Tunable Fluorescence and Photochromism of a Flavylium-Based MCM-41 Pigment.

Incorporation of flavylium-derived chalcones in the cetyltrimethylammonium bromide-templated synthesis of mesoporous silica particles with no subsequent removal of the micellar phase leads to high luminescence (0.3 < ϕf < 0.5) and strong color-contrast photochromic pigments finely tunable over a large pH range (1 < pH < 11).

A thermochromic europium(iii) room temperature ionic liquid with thermally activated anion-cation interactions.

We report the first example of an observable and reversible case of thermochromism due to the interaction of an alkylphosphonium (P6,6,6,14)+ with a ß-diketonate (1,1,1,2,2,3,3-heptafluoro-7,7-dimethyloctane-4,6-dionate-fod) of an europium(iii) tetrakis-ß-diketonate room temperature ionic liquid. This thermochromism is characterized by the conversion of a light yellow viscous liquid, at room temperature, to a reddish substance close to 80 °C. The reversibility of this optical effect was highlighted by the thermal stability of the Eu(iii) complex.

Hiding and unveiling trans-chalcone in a constrained derivative of 4',7-dihydroxyflavylium in water: a versatile photochromic system.

A structurally constrained derivative of 4',7-dihydroxyflavylium was studied in aqueous solution and in CTAB micelles by pH jumps, flash photolysis and continuous irradiation with spectroscopic details assessed as well by theoretical calculations. In water, up to pH = 8, the compound shows only acid base chemistry with deprotonation of the flavylium cation to form a quinoidal base that further deprotonates with pKas of 4.8 and 7.4. In the basic region, unprotonated trans-chalcones are formed. No neutral trans-chalcone (Ct) is formed in water preventing the establishment of the well-known photochromism involving photoisomerization of this species with subsequent formation of the flavylium cation. Addition of 0.02 M CTAB drastically changes the mole fraction distribution of species, leading to the formation of Ct (χCt = 1 at pH = 5) and unveiling a photochromic behavior with a pH-tunable colour contrast in a large pH range (2 < pH < 8). The Ct species can be hidden again (irreversibly) upon addition of α-cyclodextrin that disrupts the CTAB micelles, reverting the system to its initial mole fraction distribution of species. These supramolecular inputs work atop the molecular reaction networks by modifying their species' mole fraction distribution.

The challenging SO2-mediated chemical build-up of protein aggregates in wines.

Despite the extensive research performed during the last decades, the multifactorial mechanism responsible for white wine protein haze formation is not fully characterized. A model is proposed, which is essentially based on two postulates: the experimental identification of sulfur dioxide as the non-proteinaceous factor, and the inference from reliable data available in the literature of the dynamic chemistry played by wine protein sulfhydryl groups. Unlike other reducing agents, addition of SO2 to must/wine upon heating cleaves intraprotein disulfide bonds, hinders thiol-disulfide exchange during protein interactions, and leads to formation of novel interprotein disulfide bonds. These bonds are ultimately responsible for wine protein aggregation following a nucleation-growth kinetic model, as shown by Dynamic Light Scattering experiments. The model was tested in wine model solution (using total and fractionated wine proteins) and validated under real wine conditions. The results achieved may open the way to develop techniques that will find wide application in the wine industry.

Characterization of a novel intrinsic luminescent room-temperature ionic liquid based on [P6,6,6,14 ][ANS].

Intrinsically luminescent room-temperature ionic liquids (RTILs) can be prepared by combining a luminescent anion (more common) or cation with appropriate counter ions, rendering new luminescent soft materials. These RTILs are still new, and many of their photochemical properties are not well known. A novel intrinsic luminescent RTIL based on the 8-anilinonaphthalene-1-sulfonate ([ANS]) anion combined with the trihexyltetradecylphosphonium ([P6,6,6,14 ]) cation was prepared and characterized by spectroscopic techniques. Detailed photophysical studies highlight the influence of the ionic liquid environment on the ANS fluorescence, which together with rheological and (1) H NMR experiments illustrate the effects of both the viscosity and electrostatic interactions between the ions. This material is liquid at room temperature and possesses a glass transition temperature (Tg ) of 230.4 K. The fluorescence is not highly sensitive to factors such as temperature, but owing to its high viscosity, dynamic Stokes shift measurements reveal very slow components for the IL relaxation.

Excited-state proton transfer in confined medium. 4-methyl-7-hydroxyflavylium and ß-naphthol incorporated in cucurbit[7]uril.

Excited-state proton transfer (ESPT) was studied by fluorescent emission using a mathematical model recast from the Weller theory. The titration curves can be fitted with three parameters: pK(a) (acidity constant of the ground sate), pK(ap)* (apparent acidity constant of the excited state), and η(A*), the efficiency of excited base formation from the excited acid. ß-Naphthol and 4-metyhl-7-hydroxyflavylium were studied in aqueous solution and upon incorporation in cucurbit[7]uril. For all the compounds studied the interaction with the host leads to 1:1 adducts and the ground-state pK(a) increases upon incorporation. Whereas the ESPT of 4-methyl-7-hydroxyflavylium practically does not change in the presence of the host, in the case of ß-naphthol it is prevented and the fluorescence emission titration curves are coincident with those taken by absorption. The position of the guest inside the host was investigated by NMR experiments and seems to determine the efficiency of the ESPT. The ESPT decreases for the guest, exhibiting a great protection of the phenol to the bulk water interaction.

Europium(III) tetrakis(ß-diketonate) complex as an ionic liquid: a calorimetric and spectroscopic study.

An intrinsic photoluminescent ionic liquid based on europium(III) tetrakis(ß-diketonate) complex with a tetraalkylphosphonium as counterion was synthesized. Calorimetric measurements showed a melting point at 63 °C, which allows the ionic liquid classification. When cooling the material from the liquid state, metastable supercooled ionic liquid is obtained, as seen from NMR spectroscopy as well. Eu(III) photoluminescence is clearly observed while the absorption spectra of the ligand is dominant, showing the antenna effect. This was confirmed with submicrosecond time scale luminescence spectroscopy, where a rise of Eu(III) emission is observed with the correspondent decay of the ligand excited state. Temperature effects in the photoluminescence are also shown, being prominent above the melting point where the intensity decreases with Arrhenius behavior. Eu(III) luminescence decays also show features characteristic of energy migration between homologue Eu(III) species. Solvent effects were also studied by NMR and Luminescence spectroscopies, highlighting that the nucleophilicity of organic solvents such as n-alcohols leads to a coordination with Eu(III), which ultimately compromises the stability of the complex.

Electrochromic properties of inkjet printed vanadium oxide gel on flexible polyethylene terephthalate/indium tin oxide electrodes.

Vanadium oxide gel was synthesized and formulated for the assembly of solid-state electrochromic cells on flexible and transparent electrodes using inkjet printing. FTIR, Raman, and X-ray diffraction spectroscopic measurements showed that the vanadium oxide gel here synthesized consisted of V(2)O(5)·6H(2)O, microstructures similar to orthorhombic V(2)O(5), while Raman spectroscopy also shows the presence of amorphous domains. Atomic force microscopy (AFM) images of the thin films printed using an inkjet shows a ribbonlike structure, which is in accordance with previous results of the vanadium oxide gels in solution. Solid-state electrochromic devices were assembled at room temperature using the inkjet printed films, without any sinterization step. The electrochemical properties of the vanadium oxide gel were characterized by cyclic voltammetry and spectroelectrochemistry by visible/NIR absorption spectroscopy (in both liquid and solid-state). Several redox steps are observed, which gives rise to a variety of color transitions as a function of the applied voltage. The different optical properties of the vanadium oxide gel are assigned to different intercalation steps of Li(+), leading to different crystalline phases of the gel. The final result is a solid-state electrochromic cell showing excellent contrast between the redox states, giving rise to colors such as yellow, green, or blue. Color space analysis was used to characterize the electrochromic transitions, and while absorption spectra showed rather long switching times (up to 100 s), in L*a*b* color space coordinates, the switching time is smaller than 30 s. These electrochromic cells also have an excellent cycling stability showing high reversibility and a cyclability up to more than 30,000 cycles with a degradation of 18%.

Inkjet printing of sol-gel synthesized hydrated tungsten oxide nanoparticles for flexible electrochromic devices.

Tungsten oxide nanoparticles were synthesized via a sol-gel route using metallic tungsten as precursor, and were printed on a flexible electrode using inkjet printing in order to build solid-state electrochromic cells. Several spectroscopic techniques were used to characterize and compare tungsten oxide particles obtained from different origins. FTIR, Raman and X-ray diffraction spectroscopic measurements showed that the sol-gel synthesis described here produces nanoparticles mainly in an amorphous state with hexagonal crystalline domains and allowed the analysis of the hydration extent of those nanoparticles. The size was measured combining dynamic light scattering, sedimentation, and microscopic techniques (AFM), showing a consistent size of about 200 nm. The tungsten oxide nanoparticles were used to produce an ink formulation for application in inkjet printing. Solid-state electrochromic devices were assembled at room temperature, without sintering the tungsten oxide printed films, showing excellent contrast between on/off states. Electrochemical characterization of those films is described using cyclic voltammetry. The devices were then tested through spectroelectrochemistry by Visible/NIR absorption spectroscopy (400-2200 nm range), showing a dual spectroscopic response depending on the applied voltage. This phenomenon is attributed to the presence of two different crystalline states in accordance with results obtained from the spectroscopic characterization of the nanoparticles. The electrochromic cells had a good cycling stability showing high reversibility and a cyclability up to more than 50,000 cycles with a degradation of 25%.