Population Pharmacokinetics of Z-Endoxifen in Patients With Advanced Solid Tumors.

The purpose of this study was to develop and validate a population pharmacokinetic model for Z-endoxifen in patients with advanced solid tumors and to identify clinical variables that influence pharmacokinetic parameters. Z-endoxifen-HCl was administered orally once a day on a 28-day cycle (±3 days) over 11 dose levels ranging from 20 to 360 mg. A total of 1256 Z-endoxifen plasma concentration samples from 80 patients were analyzed using nonlinear mixed-effects modeling to develop a population pharmacokinetic model for Z-endoxifen. A 2-compartment model with oral depot and linear elimination adequately described the data. The estimated apparent total clearance, apparent central volume of distribution, and apparent peripheral volume of distribution were 4.89 L/h, 323 L, and 39.7 L, respectively, with weight-effect exponents of 0.75, 1, and 1, respectively. This model was used to explore the effects of clinical and demographic variables on Z-endoxifen pharmacokinetics. Weight, race on clearance, and aspartate aminotransferase on the absorption rate constant were identified as significant covariates in the final model. This novel population pharmacokinetic model provides insight regarding factors that may affect the pharmacokinetics of Z-endoxifen and may assist in the design of future clinical trials.

Prospective evaluation of high-dose methotrexate pharmacokinetics in adult patients with lymphoma using novel determinants of kidney function.

High-dose methotrexate (HDMTX) pharmacokinetics (PKs), including the best estimated glomerular filtration rate (eGFR) equation that reflects methotrexate (MTX) clearance, requires investigation. This prospective, observational, single-center study evaluated adult patients with lymphoma treated with HDMTX. Samples were collected at predefined time points up to 96 h postinfusion. MTX and 7-hydroxy-MTX PKs were estimated by standard noncompartmental analysis. Linear regression determined which serum creatinine- or cystatin C-based eGFR equation best predicted MTX clearance. The 80 included patients had a median (interquartile range [IQR]) age of 68.6 years (IQR 59.2-75.6), 54 (67.5%) were men, and 74 (92.5%) were White. The median (IQR) dose of MTX was 7.6 (IQR 4.8-11.3) grams. Median clearance was similar across three dosing levels at 4.5-5.6 L/h and was consistent with linear PKs. Liver function, weight, age, sex, concomitant chemotherapy, and number of previous MTX doses did not impact clearance. MTX area under the curve (AUC) values varied over a fourfold range and appeared to increase in proportion to the dose. The eGFRcys (ml/min) equation most closely correlated with MTX clearance in both the entire cohort and after excluding outlier MTX clearance values (r = 0.31 and 0.51, respectively). HDMTX as a 4-h infusion displays high interpatient pharmacokinetic variability. Population PK modeling to optimize MTX AUC attainment requires further evaluation. The cystatin C-based eGFR equation most closely estimated MTX clearance and should be investigated for dosing and monitoring in adults requiring MTX as part of lymphoma management.

Toxicity and pharmacokinetics of actinomycin-D and vincristine in children and adolescents: Children's Oncology Group Study ADVL06B1.

Actinomycin-D and vincristine are cytotoxic drugs commonly used to treat cancers in children. This prospective study assessed pharmacokinetic variability and toxicity of these drugs in children. Blood samples were collected in 158 patients. Actinomycin-D or vincristine concentrations were quantified using high-performance liquid chromatography-tandem mass spectrometry. Pharmacokinetic parameters were estimated using non-compartmental methods. Target toxicities were collected prospectively. Actinomycin-D pharmacokinetics (n = 52 patients) were highly variable. The median (coefficient of variation, CV%) area under the concentration-time curve (AUC) was 332 ng/mL·h. (110%); clearance was 4.6 L/h/m2 (90%); half-life was 25 h (60%). No patient met the defined criteria for myelosuppression. In multivariate analysis, none of the demographic nor pharmacokinetic parameters was predictors of acute hepatotoxicity. Vincristine pharmacokinetics (n = 132 patients) demonstrated substantial variability. The median (CV%) AUC was 78 ng/mL·h (98%); clearance was 17.2 L/h/m2 (67%); half-life was 14.6 h (73%). In multivariate analysis, the effect of increasing age for a given BSA was an increase in neuropathy while the effect of increasing BSA for a given age was a decrease in neuropathy. Conclusion: Pharmacokinetics of both drugs were highly variable. For actinomycin-D, there was no correlation between demographic or pharmacokinetic parameters and target toxicities. For vincristine, the correlations of age and BSA and neuropathy are confounded by the correlation between age and BSA in children and the ability to ascertain neuropathy in infants. Variability may be attributed to dose reductions and capped doses for both drugs. Investigation of BSA-based dosing in young children is warranted to decrease variability of exposure.

Tyrosine Phosphorylation of Mitochondrial Creatine Kinase 1 Enhances a Druggable Tumor Energy Shuttle Pathway.

How mitochondrial metabolism is altered by oncogenic tyrosine kinases to promote tumor growth is incompletely understood. Here, we show that oncogenic HER2 tyrosine kinase signaling induces phosphorylation of mitochondrial creatine kinase 1 (MtCK1) on tyrosine 153 (Y153) in an ABL-dependent manner in breast cancer cells. Y153 phosphorylation, which is commonly upregulated in HER2+ breast cancers, stabilizes MtCK1 to increase the phosphocreatine energy shuttle and promote proliferation. Inhibition of the phosphocreatine energy shuttle by MtCK1 knockdown or with the creatine analog cyclocreatine decreases proliferation of trastuzumab-sensitive and -resistant HER2+ cell lines in culture and in xenografts. Finally, we show that cyclocreatine in combination with the HER2 kinase inhibitor lapatinib reduces the growth of a trastuzumab-resistant HER2+ patient-derived xenograft. These findings suggest that activation of the phosphocreatine energy shuttle by MtCK1 Y153 phosphorylation creates a druggable metabolic vulnerability in cancer.

Streptococcus pneumoniae capsular polysaccharide is linked to peptidoglycan via a direct glycosidic bond to ß-D-N-acetylglucosamine.

For many bacteria, including those important in pathogenesis, expression of a surface-localized capsular polysaccharide (CPS) can be critical for survival in host environments. In Gram-positive bacteria, CPS linkage is to either the cytoplasmic membrane or the cell wall. Despite the frequent occurrence and essentiality of these polymers, the exact nature of the cell wall linkage has not been described in any bacterial species. Using the Streptococcus pneumoniae serotype 2 CPS, which is synthesized by the widespread Wzy mechanism, we found that linkage occurs via the reducing end glucose of CPS and the ß-D-N-acetylglucosamine (GlcNAc) residues of peptidoglycan (PG). Hydrofluoric acid resistance, 31P-NMR, and 32P labeling demonstrated the lack of phosphodiester bonds, which typically occur in PG-polysaccharide linkages. Component sugar analysis of purified CPS-PG identified only CPS and PG sugars in the appropriate ratios, suggesting the absence of an oligosaccharide linker. Time of flight mass spectrometry confirmed a direct glycosidic linkage between CPS and PG and showed that a single CPS repeat unit can be transferred to PG. The linkage was acetolysis susceptible, indicative of a 1,6 glycosidic bond between CPS and the GlcNAc C-6. The acetylation state of GlcNAc did not affect linkage. A direct glycosidic linkage to PG was also demonstrated for serotypes 8 and 31, whose reducing end sugars are glucose and galactose, respectively. These results provide the most detailed descriptions of CPS-PG linkages for any microorganism. Identification of the linkage is a first step toward identifying the linking enzyme and potential inhibitors of its activity.

Low Shrinkage Silorane Composites.

Polymerization shrinkage of methacrylate composites utilizing bisphenol-A glycidal methacylate or urethane dimethacrylate has typically been about 3-3.5% by volume. Though adjustments have been made to filler loading, filler size, filler particle distribution, and improved silanization, the polymerization contraction still creates some significant clinical problems. A new composite utilizing a completely different chemistry has been released, with polymerization shrinkage of less than one percent. This article will review the clinical effects of polymerization contraction of composite resins, the nature and properties of this chemical form of composite, and potential clinical applications.

Clinical Value of Natriuretic Peptides in Predicting Time to Dialysis in Stage 4 and 5 Chronic Kidney Disease Patients.

BACKGROUND: Anticipating the time to renal replacement therapy (RRT) in chronic kidney disease (CKD) patients is an important but challenging issue. Natriuretic peptides are biomarkers of ventricular dysfunction related to poor outcome in CKD. We comparatively investigated the value of B-type natriuretic peptide (BNP) and N-terminal pro-B-type natriuretic peptide (NT-proBNP) as prognostic markers for the risk of RRT in stage 4 and 5 CKD patients, and in foretelling all-cause mortality and major cardiovascular events within a 5-year follow-up period. METHODS: Baseline plasma BNP (Triage, Biosite) and NT-proBNP (Elecsys, Roche) were measured at inclusion. Forty-three patients were followed-up during 5 years. Kaplan-Meier analysis, with log-rank testing and hazard ratios (HR), were calculated to evaluate survival without RRT, cardiovascular events or mortality. The independent prognostic value of the biomarkers was estimated in separate Cox multivariate analysis, including estimated glomerular filtration rate (eGFR), creatininemia and comorbidities. RESULTS: During the first 12-month follow-up period, 16 patients started RRT. NT-proBNP concentration was higher in patients who reached endpoint (3221 ng/L vs 777 ng/L, p = 0.02). NT-proBNP concentration > 1345 ng/L proved significant predictive value on survival analysis for cardiovascular events (p = 0.04) and dialysis within 60 months follow-up (p = 0.008). BNP concentration > 140 ng/L was an independent predictor of RRT after 12 months follow-up (p<0.005), and of significant predictive value for initiation of dialysis within 60 months follow-up. CONCLUSIONS: Our results indicate a prognostic value for BNP and NT-proBNP in predicting RRT in stage 4 and 5 CKD patients, regarding both short- and long-term periods. NT-proBNP also proved a value in predicting cardiovascular events. Natriuretic peptides could be useful predictive biomarkers for therapeutic guidance in CKD.

Repair Versus Replacement of Restorations.

Dentists evaluate previously placed restorations every day to determine their acceptability. Many restorations have some defects associated with them. This article will review criteria useful to determine whether a restoration can be repaired, refurbished, or replaced. Methods and materials usefulfor repair will be discussed, as well as the science behind the decision-making.

Amalgam Restorations: To Bond or Not.

This article will review the use of various liners used to eliminate microleakage in amalgam restorations. It will review the literature about whether amalgam restorations are improved by using a bonding process and if so specifically how it improves the patient outcome.

Using Multiple Bonding Strategies.

There are many ways to bond to tooth structure, some micro-mechanical some chemical, some a combination. Different dentin bonding materials have different bonding strengths to differently prepared surfaces, and because of differences in their nature, different areas of tooth structure present peculiar bonding challenges. This paper will review a variety of material types, elucidating their particular bonding strengths and commenting on improved bonding strategies to increase durability, strength, and favorable pulpal response. In this discussion, resin dentin bonding systems, glass ionomers, Gluma, resin cements, and newer combined products will br reviewed.

The effect of occlusal forces on restorations.

This review will focus on the effect occlusal forces, both normal masticatory force and paranormal bruxing and clenching force, have on various restorative materials and their interaction with the teeth through a variety of bonding mechanisms. Salient physical properties of each of the materials will be reviewed, as well as the effect occlusal force has on restoration durability.

Enamel craze lines.

Enamel craze lines are a common clinical finding, especially in older patients and in patients who brux. These craze lines frequently are discolored and may present as clear in color, grey, or brown. The clinical question is, when do enamel craze lines need restoration and when should we leave them untreated? This review will look at enamel structure and the effects of occlusion, bruxing, temperature, and restorations on enamel structure. Recommendations will be made on how and when to deal with these cosmetic defects of enamel.

Prevention of dental disease versus surgical treatment.

The members of the Minnesota legislature have debated methods by which access to dental care and treatment of dental disease can be improved at a cost lower than that of present delivery systems. This review sheds light on some significant aspects of what the dental profession has learned over the last century that has proven significantly beneficial to the overall health of the American populace. Recommendations are made in the use of cost-effective dental public health interventions that could be used to provide better access and improved dental health at lower cost.

Streptococcus pneumoniae serotype 11D has a bispecific glycosyltransferase and expresses two different capsular polysaccharide repeating units.

Streptococcus pneumoniae (pneumococcus) expresses a capsular polysaccharide (CPS) that protects against host immunity and is synthesized by enzymes in the capsular polysaccharide synthesis (cps) locus. Serogroup 11 has six members (11A to -E) and the CPS structure of all members has been solved, except for serotype 11D. The cps loci of 11A and 11D differ by one codon (N112S) in wcrL, which putatively encodes a glycosyltransferase that adds the fourth sugar of the CPS repeating unit (RU). Gas chromatography and nuclear magnetic resonance analysis revealed that 11A and 11D PSs contain identical CPS RUs that contain αGlc as the fourth sugar. However, ∼25% of 11D CPS RUs contain instead αGlcNAc as the fourth sugar, suggesting that 11D wcrL encodes a bispecific glycosyltransferase. To test the hypothesis that codon 112 of WcrL determines enzyme specificity, and therefore the fourth sugar in the RU, we generated three isogenic pneumococcal strains with 11A cps loci containing wcrL encoding Ser-112 (MBO128) or Ala-112 (MBO130). MBO128 was serologically and biochemically identical to serotype 11D. MBO130 has a unique serologic profile; has as much αGlcNAc as 11F, 11B, and 11C CPS do; and may represent a new serotype. These findings demonstrate how pneumococci alter their CPS structure and their immunologic properties with a minimal genetic change.

Clinical uses of glutaraldehyde/2-hydroxyethylmethacrylate (GLUMA).

Glutaraldehyde/2-Hydroxyethylmethacrylate (GLUMA) is a chemical frequenty used for desensitization of teeth and has other uses as suggested in the literature. Some newer recommendations have been made relative to its use during tooth preparation, as a disinfectant, rewetting during bonding, prior to cementation of crowns and bridges, and in dealing with pulpal exposures. This article will explore the science behind these and other applications for this chemical and its effect on the tooth structure and its local environment.

Cementation: methods and materials. Part two.

This is a review of the literature of the last 21 years about cementing or luting indirect restorations to tooth structure. Recommendations are made as to the surface preparation of precious metals, non-precious metals, indirect composite materials, and all available porcelain materials including feldspathic, luecite reinforced, lithium di-silicate, slip cast aluminum oxide, densely sintered aluminum oxide, and zirconia prior to luting. Using data from a variety of sources, product categories of materials and various bonding materials and procedures are ranked according to their bond strength and durability.