Performance upgrade of a microbial explosives' sensor strain by screening a high throughput saturation library of a transcriptional regulator.

We present a methodology for a high-throughput screening (HTS) of transcription factor libraries, based on bacterial cells and GFP fluorescence. The method is demonstrated on the Escherichia coli LysR-type transcriptional regulator YhaJ, a key element in 2,4-dinitrotuluene (DNT) detection by bacterial explosives' sensor strains. Enhancing the performance characteristics of the YhaJ transcription factor is essential for future standoff detection of buried landmines. However, conventional directed evolution methods for modifying YhaJ are limited in scope, due to the vast sequence space and the absence of efficient screening methods to select optimal transcription factor mutants. To overcome this limitation, we have constructed a focused saturation library of ca. 6.4 × 107 yhaJ variants, and have screened over 70 % of its sequence space using fluorescence-activated cell sorting (FACS). Through this screening process, we have identified YhaJ mutants exhibiting superior fluorescence responses to DNT, which were then effectively transformed into a bioluminescence-based DNT detection system. The best modified DNT reporter strain demonstrated a 7-fold lower DNT detection threshold, a 45-fold increased signal intensity, and a 40 % shorter response time compared to the parental bioreporter. The FACS-based HTS approach presented here may hold a potential for future molecular enhancement of other sensing and catalytic bioreactions.

Intracranial Assessment of Androgen Receptor Antagonists in Mice Bearing Human Glioblastoma Implants.

The median survival time of patients with an aggressive brain tumor, glioblastoma, is still poor due to ineffective treatment. The discovery of androgen receptor (AR) expression in 56% of cases offers a potential breakthrough. AR antagonists, including bicalutamide and enzalutamide, induce dose-dependent cell death in glioblastoma and glioblastoma-initiating cell lines (GIC). Oral enzalutamide at 20 mg/kg reduces subcutaneous human glioblastoma xenografts by 72% (p = 0.0027). We aimed to further investigate the efficacy of AR antagonists in intracranial models of human glioblastoma. In U87MG intracranial models, nude mice administered Xtandi (enzalutamide) at 20 mg/kg and 50 mg/kg demonstrated a significant improvement in survival compared to the control group (p = 0.24 and p < 0.001, respectively), confirming a dose-response relationship. Additionally, we developed a newly reformulated version of bicalutamide, named "soluble bicalutamide (Bic-sol)", with a remarkable 1000-fold increase in solubility. This reformulation significantly enhanced bicalutamide levels within brain tissue, reaching 176% of the control formulation's area under the curve. In the U87MG intracranial model, both 2 mg/kg and 4 mg/kg of Bic-sol exhibited significant efficacy compared to the vehicle-treated group (p = 0.0177 and p = 0.00364, respectively). Furthermore, combination therapy with 8 mg/kg Bic-sol and Temozolomide (TMZ) demonstrated superior efficacy compared to either Bic-sol or TMZ as monotherapies (p = 0.00706 and p = 0.0184, respectively). In the ZH-161 GIC mouse model, the group treated with 8 mg/kg Bic-sol as monotherapy had a significantly longer lifespan than the groups treated with TMZ or the vehicle (p < 0.001). Our study demonstrated the efficacy of androgen receptor antagonists in extending the lifespan of mice with intracranial human glioblastoma, suggesting a promising approach to enhance patient outcomes in the fight against this challenging disease.

3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization.

New ink compositions for direct ink writing (DIW) printing of hydrogels, combining superior rheological properties of cellulose nanocrystals (CNCs) and a water-compatible photoinitiator, are presented. Rapid fixation was achieved by photopolymerization induced immediately after the printing of each layer by 365 nm light for 5 s, which overcame the common height limitation in DIW printing of hydrogels, and enabled the fabrication of objects with a high aspect ratio. CNCs imparted a unique rheological behavior, which was expressed by orders of magnitude difference in viscosity between low and high shear rates and in rapid high shear recovery, without compromising ink printability. Compared to the literature, the presented printing compositions enable the use of low photoinitiator concentrations at a very short build time, 6.25 s/mm, and are also curable by 405 nm light, which is favorable for maintaining viability in bioinks.

3D-printed self-healing hydrogels via Digital Light Processing.

Self-healing hydrogels may mimic the behavior of living tissues, which can autonomously repair minor damages, and therefore have a high potential for application in biomedicine. So far, such hydrogels have been processed only via extrusion-based additive manufacturing technology, limited in freedom of design and resolution. Herein, we present 3D-printed hydrogel with self-healing ability, fabricated using only commercially available materials and a commercial Digital Light Processing printer. These hydrogels are based on a semi-interpenetrated polymeric network, enabling self-repair of the printed objects. The autonomous restoration occurs rapidly, at room temperature, and without any external trigger. After rejoining, the samples can withstand deformation and recovered 72% of their initial strength after 12 hours. The proposed approach enables 3D printing of self-healing hydrogels objects with complex architecture, paving the way for future applications in diverse fields, ranging from soft robotics to energy storage.

Effective Oral Administration of an Antitumorigenic Nanoformulated Titanium Complex.

Orally administered anticancer drugs facilitate treatment, but the acidic conditions in the stomach often challenge their availability. PhenolaTi is a TiIV -based nontoxic anticancer drug with marked in-vivo efficacy. We report that nanoformulation protects phenolaTi from decomposition in stomach-like conditions. This is evidenced by similar NMR characteristics and similar in-vitro cytotoxicity toward murine (CT-26) and human (HT-29) colon cancer cells before and after incubation of nanoformulated phenolaTi (phenolaTi-F) at pH 2, unlike results with the unformulated form of the complex. Furthermore, administration of phenolaTi-F in animal drinking water revealed a notable inhibition of tumor growth in Balb/c and immune-deficient (Nude) mice inoculated with CT-26 and HT-29 cells, respectively. In-vivo efficacy was at least similar to that of the corresponding intraperitoneal treatment with phenolaTi-F and the clinically employed oral drug, capecitabine. No body weight loss or clinical signs of toxicity were evident in the phenolaTi-F-treated animals. These findings demonstrate a new convenient mode of cancer treatment through oral administration by safe titanium-based drugs.

Size and lipid modification determine liposomal Indocyanine green performance for tumor imaging in a model of rectal cancer.

Localization of rectal tumors is a challenge in minimally invasive surgery due to the lack of tactile sensation. We had developed liposomal indocyanine green (Lip-ICG) for localization of rectal tumor. In this study we evaluated the effects of liposome size and lipid PEGylation on imaging. We used an endoscopically-guided orthotopic experimental rectal cancer model in which tumor fluorescence was determined at different time points after intravenous (i.v.) administration of Lip-ICG and PEGylated liposomes (PEG-Lip-ICG). Signal intensity was measured by tumor-to-background ratio (TBR), or normalized TBR (compared to TBR of free ICG). Fluorescence microscopy of tumor tissue was performed to determine fluorescence localization within the tissue and blood vessels. Liposomes of 60 nm showed an increased TBR compared with free ICG at 12 hours after i.v. injection: normalized TBR (nTBR) = 3.11 vs. 1, respectively (p = 0.006). Larger liposomes (100 nm and 140 nm) had comparable signal to free ICG (nTBR = 0.98 ± 0.02 and 0.78 ± 0.08, respectively), even when additional time points were examined (0.5, 3 and 24 hours). PEG-Lip- ICG were more efficient than Lip-ICG (TBR = 4.2 ± 0.18 vs. 2.5 ± 0.12, p < 0.01) presumably because of reduced uptake by the reticulo-endothelial system. ICG was found outside the capillaries in tumor margins. We conclude that size and lipid modification impact imaging intensity.

Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing.

We report a method to prepare highly stretchable and UV curable hydrogels for high resolution DLP based 3D printing. Hydrogel solutions were prepared by mixing self-developed high-efficiency water-soluble TPO nanoparticles as the photoinitiator with an acrylamide-PEGDA (AP) based hydrogel precursor. The TPO nanoparticles make AP hydrogels UV curable, and thus compatible with the DLP based 3D printing technology for the fabrication of complex hydrogel 3D structures with high-resolution and high-fidelity (up to 7 µm). The AP hydrogel system ensures high stretchability, and the printed hydrogel sample can be stretched by more than 1300%, which is the most stretchable 3D printed hydrogel. The printed stretchable hydrogels show an excellent biocompatibility, which allows us to directly 3D print biostructures and tissues. The great optical clarity of the AP hydrogels offers the possibility of 3D printing contact lenses. More importantly, the AP hydrogels are capable of forming strong interfacial bonding with commercial 3D printing elastomers, which allows us to directly 3D print hydrogel-elastomer hybrid structures such as a flexible electronic board with a conductive hydrogel circuit printed on an elastomer matrix.

Optimization of liposomal indocyanine green for imaging of the urinary pathways and a proof of concept in a pig model.

BACKGROUND: Iatrogenic ureteral injury is an increasing concern in the laparoscopic era, affecting both patient morbidity and costs. Current techniques enabling intraoperative ureteral identification require invasive procedures or radiations. Our aim was to develop a real-time, non-invasive, radiation-free method to visualize ureters, based on near-infrared (NIR) imaging. For this purpose, we interfered with the biliary excretion pathway of the indocyanine green (ICG) fluorophore by loading it into liposomes, enabling renal excretion. In this work, we studied various parameters influencing ureteral imaging. METHODS: Fluorescence intensity (FI) of various liposomal ICG sizes and doses were characterized in vitro and subsequently tested in vivo in mice and pigs. Quantification was performed by measuring FI in multiple points and applying the ureteral/retroperitoneum ratio (U/R). RESULTS: The optimal liposomal ICG loading dose was 20%, for the different liposomes' sizes tested (30, 60, 100 nm). Higher concentration of ICG decreased FI. In vivo, the optimal liposome size for ureteral imaging was 60 nm, which yielded a U/R of 5.2 ± 1.7 (p < 0.001 vs. free ICG). The optimal ICG dose was 8 mg/kg (U/R = 2.1 ± 0.4, p < 0.05 vs. 4 mg/kg). Only urine after liposomal ICG injection had a measurable FI, and not after free ICG injection. Using a NIR-optimized laparoscopic camera, ureters could be effectively imaged in pigs, from 10 min after injection and persisting for at least 90 min. Ureteral peristaltic waves could be clearly identified only after liposomal ICG injection. CONCLUSIONS: Optimization of liposomal ICG allowed to visualize enhanced ureters in animal models and seems a promising fluorophore engineering, which calls for further developments.

Continues administration of Nano-PSO significantly increased survival of genetic CJD mice.

We have shown previously that Nano-PSO, a nanodroplet formulation of pomegranate seed oil, delayed progression of neurodegeneration signs when administered for a designated period of time to TgMHu2ME199K mice, modeling for genetic prion disease. In the present work, we treated these mice with a self-emulsion formulation of Nano-PSO or a parallel Soybean oil formulation from their day of birth until a terminal disease stage. We found that long term Nano-PSO administration resulted in increased survival of TgMHu2ME199K lines by several months. Interestingly, initiation of treatment at day 1 had no clinical advantage over initiation at day 70, however cessation of treatment at 9months of age resulted in the rapid loss of the beneficial clinical effect. Pathological studies revealed that treatment with Nano-PSO resulted in the reduction of GAG accumulation and lipid oxidation, indicating a strong neuroprotective effect. Contrarily, the clinical effect of Nano-PSO did not correlate with reduction in the levels of disease related PrP, the main prion marker. We conclude that long term administration of Nano-PSO is safe and may be effective in the prevention/delay of onset of neurodegenerative conditions such as genetic CJD.

High-performance 3D printing of hydrogels by water-dispersible photoinitiator nanoparticles.

In the absence of water-soluble photoinitiators with high absorbance in the ultraviolet (UV)-visible range, rapid three-dimensional (3D) printing of hydrogels for tissue engineering is challenging. A new approach enabling rapid 3D printing of hydrogels in aqueous solutions is presented on the basis of UV-curable inks containing nanoparticles of highly efficient but water-insoluble photoinitiators. The extinction coefficient of the new water-dispersible nanoparticles of 2,4,6-trimethylbenzoyl-diphenylphosphine oxide (TPO) is more than 300 times larger than the best and most used commercially available water-soluble photoinitiator. The TPO nanoparticles absorb significantly in the range from 385 to 420 nm, making them suitable for use in commercially available, low-cost, light-emitting diode-based 3D printers using digital light processing. The polymerization rate at this range is very fast and enables 3D printing that otherwise is impossible to perform without adding solvents. The TPO nanoparticles were prepared by rapid conversion of volatile microemulsions into water-dispersible powder, a process that can be used for a variety of photoinitiators. Such water-dispersible photoinitiator nanoparticles open many opportunities to enable rapid 3D printing of structures prepared in aqueous solutions while bringing environmental advantages by using low-energy curing systems and avoiding the need for solvents.

Treatment of a multiple sclerosis animal model by a novel nanodrop formulation of a natural antioxidant.

Multiple sclerosis (MS) is a chronic inflammatory disease of the central nervous system and is associated with demyelination, neurodegeneration, and sensitivity to oxidative stress. In this work, we administered a nanodroplet formulation of pomegranate seed oil (PSO), denominated Nano-PSO, to mice induced for experimental autoimmune encephalomyelitis (EAE), an established model of MS. PSO comprises high levels of punicic acid, a unique polyunsaturated fatty acid considered as one of the strongest natural antioxidants. We show here that while EAE-induced mice treated with natural PSO presented some reduction in disease burden, this beneficial effect increased significantly when EAE mice were treated with Nano-PSO of specific size nanodroplets at much lower concentrations of the oil. Pathological examinations revealed that Nano-PSO administration dramatically reduced demyelination and oxidation of lipids in the brains of the affected animals, which are hallmarks of this severe neurological disease. We propose that novel formulations of natural antioxidants such as Nano-PSO may be considered for the treatment of patients suffering from demyelinating diseases. On the mechanistic side, our results demonstrate that lipid oxidation may be a seminal feature in both demyelination and neurodegeneration.

Biomedical imaging of colorectal cancer by near infrared fluorescent nanoparticles.

In this paper we describe the preparation of novel Near Infrared (NIR) fluorescent nanoparticles for application in medical imaging of colorectal tumors. The nanoparticles are prepared by using only non-covalent binding processes of molecules which are approved for clinical use. The preparation process is based on the precipitation of a polycation, Eudragit-RS, followed by sequential adsorption of a blocking protein, sodium caseinate, NIR fluorescent dye, Indocyanine Green (ICG) and optionally, a targeting molecule, anti-CEA antibody. Fluorescence measurements have shown that these nanoparticles have higher resistance to photobleaching and higher quantum yield relatively to free ICG. Imaging experiments in orthotopic colorectal cancer mice models have shown that these fluorescent nanoparticles are capable of binding to LS174T human colon tumors in vivo with high specificity, even without the targeting molecule. These nanoparticles, composed of all FDA approved materials, open the way to clinical bioimaging and diagnostics of colon cancer.

Pomegranate seed oil nanoemulsions for the prevention and treatment of neurodegenerative diseases: the case of genetic CJD.

Neurodegenerative diseases generate the accumulation of specific misfolded proteins, such as PrP(Sc) prions or A-beta in Alzheimer's diseases, and share common pathological features, like neuronal death and oxidative damage. To test whether reduced oxidation alters disease manifestation, we treated TgMHu2ME199K mice, modeling for genetic prion disease, with Nano-PSO, a nanodroplet formulation of pomegranate seed oil (PSO). PSO comprises large concentrations of a unique polyunsaturated fatty acid, Punicic acid, among the strongest natural antioxidants. Nano-PSO significantly delayed disease presentation when administered to asymptomatic TgMHu2ME199K mice and postponed disease aggravation in already sick mice. Analysis of brain samples revealed that Nano-PSO treatment did not decrease PrP(Sc) accumulation, but rather reduced lipid oxidation and neuronal loss, indicating a strong neuroprotective effect. We propose that Nano-PSO and alike formulations may be both beneficial and safe enough to be administered for long years to subjects at risk or to those already affected by neurodegenerative conditions. FROM THE CLINICAL EDITOR: This team of authors report that a nanoformulation of pomegranade seed oil, containing high levels of a strong antioxidant, can delay disease onset in a mouse model of genetic prion diseases, and the formulation also indicates a direct neuroprotective effect.

Penetration and biological effects of topically applied cyclosporin A nanoparticles in a human skin organ culture inflammatory model.

Systemic antipsoriatic therapies have potentially life-threatening, long-term side effects. The efficacy of topical drugs is poor, but may be improved by the use of delivery systems based on drug nanoparticles. To produce nanoparticles (NP) composed of cyclosporin A, a classical antipsoriatic drug, and to investigate their penetration and biological effects in human skin affected by psoriatic symptoms, poly-ε-caprolactone (PCL) and cyclosporin A (CsA) NP were prepared by the solvent evaporation method. Skin penetration was followed using fluorescently labeled NP in human skin organ cultures (hSOC). Psoriatic symptoms were mimicked in hSOC by the treatment with epidermal growth factor (EGF) and bacterial lipopolysaccharide (LPS). Cell viability in hSOC was evaluated by the resazurin test, and cytokine secretion into the growth medium was measured by immunodetection. We showed that topically applied NP diffused throughout the epidermis within two hours and through the dermis within the following day. They significantly reduced the secretion of inflammatory cytokines IL-1ß, IL-6, IL-8, IL-20 and IL-23. At active doses, no cytotoxicity was detected. This type of NP display relevant properties for the use as topical anti-inflammatory agents and may help to resorb psoriatic lesions.

Formation of near-infrared fluorescent nanoparticles for medical imaging.

AIMS: Indocyanine green (ICG) is a US FDA-approved near-infrared fluorescent, water-soluble dye used for diagnostics in vitro and in vivo. The aim of this study was to develop insoluble nanoparticles based on a cationic polymer, ICG and a targeting molecule. The particles are intended for oral administration in the colon, having fluorescence in near-infrared, thus enabling remote detection. MATERIALS & METHODS: An aqueous dispersion of particles formed from Eudragit-RS by simple precipitation method possessing a mean size of approximately 100 nm and zeta potential of +16 mV was produced. RESULTS: These particles are capable of binding both ICG and fluorescein isothiocyanate-IgG via noncovalent interactions. These composite particles retain the emission characteristics of the fluorescent precursors and also exhibit potential specific recognition ability. The particles were stable in intestinal fluid and are composed only of materials that are FDA approved. CONCLUSION: The nanoparticles may be suitable for in vivo imaging and therapy by oral delivery systems.

Following the growth of surface films on lithium and their thermal behavior in standard LiPF6 solutions using differential scanning calorimetry.

In this paper, we report on attempts to use differential scanning calorimetric measurements of aged Li electrodes for the study of the kinetics of the growth of surface films on the active metal. Standard, commonly used alkyl carbonate solutions such as ethylene and di-methyl carbonates with LiPF6 were explored. Heating Li samples in solutions after aging by DSC, resulted in well-resolved curves of reaction heats vs temperature. Exothermic reactions occurring at temperatures below 150 degrees C could be attributed to changes related to the surface films and their heat evolved, increased as a function of storage time, and hence these heats represent the thickness of the surface films that grow upon storage. Scanning electron microscopy of the Li surfaces as a function of storage and heating to different temperatures confirmed that the thermal reactions of Li surfaces in these solutions up to 150 degrees C relate to the surface films only. XPS studies revealed that these processes of the surface films change the metastable organic Li salts to more stable inorganic compounds such as LiF and Li2O. Massive red-ox reactions, between the salt anion and the solvents and between the solution species and the active metal, occur at temperatures higher than 150 degrees C. The kinetics of growth of the surface films on Li show an inverse logarithmic behavior, expected for thin surface films with which the rate-limiting step of their growth depends on ions transport across the film.