Different wheat loci are associated to heritable free asparagine content in grain grown under different water and nitrogen availability.

KEY MESSAGE: Different wheat QTLs were associated to the free asparagine content of grain grown in four different conditions. Environmental effects are a key factor when selecting for low acrylamide-forming potential. The amount of free asparagine in grain of a wheat genotype determines its potential to form harmful acrylamide in derivative food products. Here, we explored the variation in the free asparagine, aspartate, glutamine and glutamate contents of 485 accessions reflecting wheat worldwide diversity to define the genetic architecture governing the accumulation of these amino acids in grain. Accessions were grown under high and low nitrogen availability and in water-deficient and well-watered conditions, and plant and grain phenotypes were measured. Free amino acid contents of grain varied from 0.01 to 1.02 mg g-1 among genotypes in a highly heritable way that did not correlate strongly with grain yield, protein content, specific weight, thousand-kernel weight or heading date. Mean free asparagine content was 4% higher under high nitrogen and 3% higher in water-deficient conditions. After genotyping the accessions, single-locus and multi-locus genome-wide association study models were used to identify several QTLs for free asparagine content located on nine chromosomes. Each QTL was associated with a single amino acid and growing environment, and none of the QTLs colocalised with genes known to be involved in the corresponding amino acid metabolism. This suggests that free asparagine content is controlled by several loci with minor effects interacting with the environment. We conclude that breeding for reduced asparagine content is feasible, but should be firmly based on multi-environment field trials. KEY MESSAGE: Different wheat QTLs were associated to the free asparagine content of grain grown in four different conditions. Environmental effects are a key factor when selecting for low acrylamide-forming potential.

Genetic regions determine tolerance to nitrogen deficiency in European elite bread wheats grown under contrasting nitrogen stress scenarios.

KEY MESSAGE: Clustering 24 environments in four contrasting nitrogen stress scenarios enabled the detection of genetic regions determining tolerance to nitrogen deficiency in European elite bread wheats. Increasing the nitrogen use efficiency of wheat varieties is an important goal for breeding. However, most genetic studies of wheat grown at different nitrogen levels in the field report significant interactions with the genotype. The chromosomal regions possibly involved in these interactions are largely unknown. The objective of this study was to quantify the response of elite bread wheat cultivars to different nitrogen field stress scenarios and identify genomic regions involved in this response. For this purpose, 212 elite bread wheat varieties were grown in a multi-environment trial at different nitrogen levels. Genomic regions associated with grain yield, protein concentration and grain protein deviation responses to nitrogen deficiency were identified. Environments were clustered according to adjusted means for grain yield, yield components and grain protein concentration. Four nitrogen availability scenarios were identified: optimal condition, moderate early deficiency, severe late deficiency, and severe continuous deficiency. A large range of tolerance to nitrogen deficiency was observed among varieties, which were ranked differently in different nitrogen deficiency scenarios. The well-known negative correlation between grain yield and grain protein concentration also existed between their respective tolerance indices. Interestingly, the tolerance indices for grain yield and grain protein deviation were either null or weakly positive meaning that breeding for the two traits should be less difficult than expected. Twenty-two QTL regions were identified for the tolerance indices. By selecting associated markers, these regions may be selected separately or combined to improve the tolerance to N deficiency within a breeding programme.

Symbiotic Variations among Wheat Genotypes and Detection of Quantitative Trait Loci for Molecular Interaction with Auxin-Producing Azospirillum PGPR.

Crop varieties differ in their ability to interact with Plant Growth-Promoting Rhizobacteria (PGPR), but the genetic basis for these differences is unknown. This issue was addressed with the PGPR Azospirillum baldaniorum Sp245, using 187 wheat accessions. We screened the accessions based on the seedling colonization by the PGPR and the expression of the phenylpyruvate decarboxylase gene ppdC (for synthesis of the auxin indole-3-acetic acid), using gusA fusions. Then, the effects of the PGPR on the selected accessions stimulating Sp245 (or not) were compared in soil under stress. Finally, a genome-wide association approach was implemented to identify the quantitative trait loci (QTL) associated with PGPR interaction. Overall, the ancient genotypes were more effective than the modern genotypes for Azospirillum root colonization and ppdC expression. In non-sterile soil, A. baldaniorum Sp245 improved wheat performance for three of the four PGPR-stimulating genotypes and none of the four non-PGPR-stimulating genotypes. The genome-wide association did not identify any region for root colonization but revealed 22 regions spread on 11 wheat chromosomes for ppdC expression and/or ppdC induction rate. This is the first QTL study focusing on molecular interaction with PGPR bacteria. The molecular markers identified provide the possibility to improve the capacity of modern wheat genotypes to interact with Sp245, as well as, potentially, other Azospirillum strains.

Phenomic selection in wheat breeding: prediction of the genotype-by-environment interaction in multi-environment breeding trials.

KEY MESSAGE: Phenomic prediction of wheat grain yield and heading date in different multi-environmental trial scenarios is accurate. Modelling the genotype-by-environment interaction effect using phenomic data is a potentially low-cost complement to genomic prediction. The performance of wheat cultivars in multi-environmental trials (MET) is difficult to predict because of the genotype-by-environment interactions (G × E). Phenomic selection is supposed to be efficient for modelling the G × E effect because it accounts for non-additive effects. Here, phenomic data are near-infrared (NIR) spectra obtained from plant material. While phenomic selection has recently been shown to accurately predict wheat grain yield in single environments, its accuracy needs to be investigated for MET. We used four datasets from two winter wheat breeding programs to test and compare the predictive abilities of phenomic and genomic models for grain yield and heading date in different MET scenarios. We also compared different methods to model the G × E using different covariance matrices based on spectra. On average, phenomic and genomic prediction abilities are similar in all different MET scenarios. Better predictive abilities were obtained when G × E effects were modelled with NIR spectra than without them, and it was better to use all the spectra of all genotypes in all environments for modelling the G × E. To facilitate the implementation of phenomic prediction, we tested MET designs where the NIR spectra were measured only on the genotype-environment combinations phenotyped for the target trait. Missing spectra were predicted with a weighted multivariate ridge regression. Intermediate predictive abilities for grain yield were obtained in a sparse testing scenario and for new genotypes, which shows that phenomic selection is an efficient and practicable prediction method for dealing with G × E.

Genetic Analysis of Platform-Phenotyped Root System Architecture of Bread and Durum Wheat in Relation to Agronomic Traits.

Roots are essential for water and nutrient uptake but are rarely the direct target of breeding efforts. To characterize the genetic variability of wheat root architecture, the root and shoot traits of 200 durum and 715 bread wheat varieties were measured at a young stage on a high-throughput phenotyping platform. Heritability of platform traits ranged from 0.40 for root biomass in durum wheat to 0.82 for the number of tillers. Field phenotyping data for yield components and SNP genotyping were already available for all the genotypes. Taking differences in earliness into account, several significant correlations between root traits and field agronomic performances were found, suggesting that plants investing more resources in roots in some stressed environments favored water and nutrient uptake, with improved wheat yield. We identified 100 quantitative trait locus (QTLs) of root traits in the bread wheat panels and 34 in the durum wheat panel. Most colocalized with QTLs of traits measured in field conditions, including yield components and earliness for bread wheat, but only in a few environments. Stress and climatic indicators explained the differential effect of some platform QTLs on yield, which was positive, null, or negative depending on the environmental conditions. Modern breeding has led to deeper rooting but fewer seminal roots in bread wheat. The number of tillers has been increased in bread wheat, but decreased in durum wheat, and while the root-shoot ratio for bread wheat has remained stable, for durum wheat it has been increased. Breeding for root traits or designing ideotypes might help to maintain current yield while adapting to specific drought scenarios.

Breeding for Economically and Environmentally Sustainable Wheat Varieties: An Integrated Approach from Genomics to Selection.

There is currently a strong societal demand for sustainability, quality, and safety in bread wheat production. To address these challenges, new and innovative knowledge, resources, tools, and methods to facilitate breeding are needed. This starts with the development of high throughput genomic tools including single nucleotide polymorphism (SNP) arrays, high density molecular marker maps, and full genome sequences. Such powerful tools are essential to perform genome-wide association studies (GWAS), to implement genomic and phenomic selection, and to characterize the worldwide diversity. This is also useful to breeders to broaden the genetic basis of elite varieties through the introduction of novel sources of genetic diversity. Improvement in varieties particularly relies on the detection of genomic regions involved in agronomical traits including tolerance to biotic (diseases and pests) and abiotic (drought, nutrient deficiency, high temperature) stresses. When enough resolution is achieved, this can result in the identification of candidate genes that could further be characterized to identify relevant alleles. Breeding must also now be approached through in silico modeling to simulate plant development, investigate genotype × environment interactions, and introduce marker-trait linkage information in the models to better implement genomic selection. Breeders must be aware of new developments and the information must be made available to the world wheat community to develop new high-yielding varieties that can meet the challenge of higher wheat production in a sustainable and fluctuating agricultural context. In this review, we compiled all knowledge and tools produced during the BREEDWHEAT project to show how they may contribute to face this challenge in the coming years.

Phenomic selection in wheat breeding: identification and optimisation of factors influencing prediction accuracy and comparison to genomic selection.

KEY MESSAGE: Phenomic selection is a promising alternative or complement to genomic selection in wheat breeding. Models combining spectra from different environments maximise the predictive ability of grain yield and heading date of wheat breeding lines. Phenomic selection (PS) is a recent breeding approach similar to genomic selection (GS) except that genotyping is replaced by near-infrared (NIR) spectroscopy. PS can potentially account for non-additive effects and has the major advantage of being low cost and high throughput. Factors influencing GS predictive abilities have been intensively studied, but little is known about PS. We tested and compared the abilities of PS and GS to predict grain yield and heading date from several datasets of bread wheat lines corresponding to the first or second years of trial evaluation from two breeding companies and one research institute in France. We evaluated several factors affecting PS predictive abilities including the possibility of combining spectra collected in different environments. A simple H-BLUP model predicted both traits with prediction ability from 0.26 to 0.62 and with an efficient computation time. Our results showed that the environments in which lines are grown had a crucial impact on predictive ability based on the spectra acquired and was specific to the trait considered. Models combining NIR spectra from different environments were the best PS models and were at least as accurate as GS in most of the datasets. Furthermore, a GH-BLUP model combining genotyping and NIR spectra was the best model of all (prediction ability from 0.31 to 0.73). We demonstrated also that as for GS, the size and the composition of the training set have a crucial impact on predictive ability. PS could therefore replace or complement GS for efficient wheat breeding programs.

Identification of QTLs affecting post-anthesis heat stress responses in European bread wheat.

KEY MESSAGE: The response of a large panel of European elite wheat varieties to post-anthesis heat stress is influenced by 17 QTL linked to grain weight or the stay-green phenotype. Heat stress is a critical abiotic stress for winter bread wheat (Triticum aestivum L.) especially at the flowering and grain filling stages, limiting its growth and productivity in Europe and elsewhere. The breeding of new high-yield and stress-tolerant wheat varieties requires improved understanding of the physiological and genetic bases of heat tolerance. To identify genomic areas associated with plant and grain characteristics under heat stress, a panel of elite European wheat varieties (N = 199) was evaluated under controlled conditions in 2016 and 2017. A split-plot design was used to test the effects of high temperature for ten days after flowering. Flowering time, leaf chlorophyll content, the number of productive spikes, grain number, grain weight and grain size were measured, and the senescence process was modeled. Using genotyping data from a 280 K SNP chip, a genome-wide association study was carried out to test the main effect of each SNP and the effect of SNP × treatment interaction. Genotype × treatment interactions were mainly observed for grain traits measured on the main shoots and tillers. We identified 10 QTLs associated with the main effect of at least one trait and seven QTLs associated with the response to post-anthesis heat stress. Of these, two main QTLs associated with the heat tolerance of thousand-kernel weight were identified on chromosomes 4B and 6B. These QTLs will be useful for breeders to improve grain yield in environments where terminal heat stress is likely to occur.

Dissecting Bread Wheat Heterosis through the Integration of Agronomic and Physiological Traits.

To meet the challenge of feeding almost 10 billion people by 2050, wheat yield has to double by 2050. However, over the past 20 years, yield increase has slowed down and even stagnated in the main producing countries. Following the example of maize, hybrids have been suggested as a solution to overcome yield stagnation in wheat. However, wheat heterosis is still limited and poorly understood. Gaining a better understanding of hybrid vigor holds the key to breed for better varieties. To this aim, we have developed and phenotyped for physiological and agronomic traits an incomplete factorial design consisting of 91 hybrids and their nineteen female and sixteen male parents. Monitoring the plant development with normalized difference vegetation index revealed that 89% of the hybrids including the five higher yielding hybrids had a longer grain filling phase with a delayed senescence that results in larger grain size. This average increase of 7.7% in thousand kernel weight translated to a positive mid-parent heterosis for grain yield for 86% of hybrids. In addition, hybrids displayed a positive grain protein deviation leading to a +4.7% heterosis in protein yield. These results shed light on the physiological bases underlying yield heterosis in wheat, paving new ways to breed for better wheat hybrids.

Combining Crop Growth Modeling With Trait-Assisted Prediction Improved the Prediction of Genotype by Environment Interactions.

Plant breeders evaluate their selection candidates in multi-environment trials to estimate their performance in contrasted environments. The number of genotype/environment combinations that can be evaluated is strongly constrained by phenotyping costs and by the necessity to limit the evaluation to a few years. Genomic prediction models taking the genotype by environment interactions (GEI) into account can help breeders identify combination of (possibly unphenotyped) genotypes and target environments optimizing the traits under selection. We propose a new prediction approach in which a secondary trait available on both the calibration and the test sets is introduced as an environment specific covariate in the prediction model (trait-assisted prediction, TAP). The originality of this approach is that the phenotyping of the test set for the secondary trait is replaced by crop-growth model (CGM) predictions. So there is no need to sow and phenotype the test set in each environment which is a clear advantage over the classical trait-assisted prediction models. The interest of this approach, called CGM-TAP, is highest if the secondary trait is easy to predict with CGM and strongly related to the target trait in each environment (and thus capturing GEI). We tested CGM-TAP on bread wheat with heading date as secondary trait and grain yield as target trait. Simple CGM-TAP model with a linear effect of heading date resulted in high predictive abilities in three prediction scenarios (sparse testing, or prediction of new genotypes or of new environments). It increased predictive abilities of all reference GEI models, even those involving sophisticated environmental covariates.

Wheat individual grain-size variance originates from crop development and from specific genetic determinism.

Wheat grain yield is usually decomposed in the yield components: number of spikes / m2, number of grains / spike, number of grains / m2 and thousand kernel weight (TKW). These are correlated one with another due to yield component compensation. Under optimal conditions, the number of grains per m2 has been identified as the main determinant of yield. However, with increasing occurrences of post-flowering abiotic stress associated with climate change, TKW may become severely limiting and hence a target for breeding. TKW is usually studied at the plot scale as it represents the average mass of a grain. However, this view disregards the large intra-genotypic variance of individual grain mass and its effect on TKW. The aim of this study is to investigate the determinism of the variance of individual grain size. We measured yield components and individual grain size variances of two large genetic wheat panels grown in two environments. We also carried out a genome-wide association study using a dense SNPs array. We show that the variance of individual grain size partly originates from the pre-flowering components of grain yield; in particular it is driven by canopy structure via its negative correlation with the number of spikes per m2. But the variance of final grain size also has a specific genetic basis. The genome-wide analysis revealed the existence of QTL with strong effects on the variance of individual grain size, independently from the other yield components. Finally, our results reveal some interesting drivers for manipulating individual grain size variance either through canopy structure or through specific chromosomal regions.

Ancient wheat varieties have a higher ability to interact with plant growth-promoting rhizobacteria.

Plant interactions with plant growth-promoting rhizobacteria (PGPR) are highly dependent on plant genotype. Modern plant breeding has largely sought to improve crop performance but with little focus on the optimization of plant × PGPR interactions. The interactions of the model PGPR strain Pseudomonas kilonensis F113 were therefore compared in 199 ancient and modern wheat genotypes. A reporter system, in which F113 colonization and expression of 2,4-diacetylphloroglucinol biosynthetic genes (phl) were measured on roots was used to quantify F113 × wheat interactions under gnotobiotic conditions. Thereafter, eight wheat accessions that differed in their ability to interact with F113 were inoculated with F113 and grown in greenhouse in the absence or presence of stress. F113 colonization was linked to improved stress tolerance. Moreover, F113 colonization and phl expression were higher overall on ancient genotypes than modern genotypes. F113 colonization improved wheat performance in the four genotypes that showed the highest level of phl expression compared with the four genotypes in which phl expression was lowest. Taken together, these data suggest that recent wheat breeding strategies have had a negative impact on the ability of the plants to interact with PGPR.

Using environmental clustering to identify specific drought tolerance QTLs in bread wheat (T. aestivum L.).

KEY MESSAGE: Environmental clustering helps to identify QTLs associated with grain yield in different water stress scenarios. These QTLs could be useful for breeders to improve grain yields and increase genetic resilience in marginal environments. Drought is one of the main abiotic stresses limiting winter bread wheat growth and productivity around the world. The acquisition of new high-yielding and stress-tolerant varieties is therefore necessary and requires improved understanding of the physiological and genetic bases of drought resistance. A panel of 210 elite European varieties was evaluated in 35 field trials. Grain yield and its components were scored in each trial. A crop model was then run with detailed climatic data and soil water status to assess the dynamics of water stress in each environment. Varieties were registered from 1992 to 2011, allowing us to test timewise genetic progress. Finally, a genome-wide association study (GWAS) was carried out using genotyping data from a 280 K SNP chip. The crop model simulation allowed us to group the environments into four water stress scenarios: an optimal condition with no water stress, a post-anthesis water stress, a moderate-anthesis water stress and a high pre-anthesis water stress. Compared to the optimal water condition, grain yield losses in the stressed conditions were 3.3%, 12.4% and 31.2%, respectively. This environmental clustering improved understanding of the effect of drought on grain yields and explained 20% of the G × E interaction. The greatest genetic progress was obtained in the optimal condition, mostly represented in France. The GWAS identified several QTLs, some of which were specific of the different water stress patterns. Our results make breeding for improved drought resistance to specific environmental scenarios easier and will facilitate genetic progress in future environments, i.e., water stress environments.

Phenomic Selection Is a Low-Cost and High-Throughput Method Based on Indirect Predictions: Proof of Concept on Wheat and Poplar.

Genomic selection - the prediction of breeding values using DNA polymorphisms - is a disruptive method that has widely been adopted by animal and plant breeders to increase productivity. It was recently shown that other sources of molecular variations such as those resulting from transcripts or metabolites could be used to accurately predict complex traits. These endophenotypes have the advantage of capturing the expressed genotypes and consequently the complex regulatory networks that occur in the different layers between the genome and the phenotype. However, obtaining such omics data at very large scales, such as those typically experienced in breeding, remains challenging. As an alternative, we proposed using near-infrared spectroscopy (NIRS) as a high-throughput, low cost and non-destructive tool to indirectly capture endophenotypic variants and compute relationship matrices for predicting complex traits, and coined this new approach "phenomic selection" (PS). We tested PS on two species of economic interest (Triticum aestivum L. and Populus nigra L.) using NIRS on various tissues (grains, leaves, wood). We showed that one could reach predictions as accurate as with molecular markers, for developmental, tolerance and productivity traits, even in environments radically different from the one in which NIRS were collected. Our work constitutes a proof of concept and provides new perspectives for the breeding community, as PS is theoretically applicable to any organism at low cost and does not require any molecular information.

Coexpression network and phenotypic analysis identify metabolic pathways associated with the effect of warming on grain yield components in wheat.

Wheat grains are an important source of human food but current production amounts cannot meet world needs. Environmental conditions such as high temperature (above 30°C) could affect wheat production negatively. Plants from two wheat genotypes have been subjected to two growth temperature regimes. One set has been grown at an optimum daily mean temperature of 19°C while the second set of plants has been subjected to warming at 27°C from two to 13 days after anthesis (daa). While warming did not affect mean grain number per spike, it significantly reduced other yield-related indicators such as grain width, length, volume and maximal cell numbers in the endosperm. Whole genome expression analysis identified 6,258 and 5,220 genes, respectively, whose expression was affected by temperature in the two genotypes. Co-expression analysis using WGCNA (Weighted Gene Coexpression Network Analysis) uncovered modules (groups of co-expressed genes) associated with agronomic traits. In particular, modules enriched in genes related to nutrient reservoir and endopeptidase inhibitor activities were found to be positively associated with cell numbers in the endosperm. A hypothetical model pertaining to the effects of warming on gene expression and growth in wheat grain is proposed. Under moderately high temperature conditions, network analyses suggest a negative effect of the expression of genes related to seed storage proteins and starch biosynthesis on the grain size in wheat.

High throughput SNP discovery and genotyping in hexaploid wheat.

Because of their abundance and their amenability to high-throughput genotyping techniques, Single Nucleotide Polymorphisms (SNPs) are powerful tools for efficient genetics and genomics studies, including characterization of genetic resources, genome-wide association studies and genomic selection. In wheat, most of the previous SNP discovery initiatives targeted the coding fraction, leaving almost 98% of the wheat genome largely unexploited. Here we report on the use of whole-genome resequencing data from eight wheat lines to mine for SNPs in the genic, the repetitive and non-repetitive intergenic fractions of the wheat genome. Eventually, we identified 3.3 million SNPs, 49% being located on the B-genome, 41% on the A-genome and 10% on the D-genome. We also describe the development of the TaBW280K high-throughput genotyping array containing 280,226 SNPs. Performance of this chip was examined by genotyping a set of 96 wheat accessions representing the worldwide diversity. Sixty-nine percent of the SNPs can be efficiently scored, half of them showing a diploid-like clustering. The TaBW280K was proven to be a very efficient tool for diversity analyses, as well as for breeding as it can discriminate between closely related elite varieties. Finally, the TaBW280K array was used to genotype a population derived from a cross between Chinese Spring and Renan, leading to the construction a dense genetic map comprising 83,721 markers. The results described here will provide the wheat community with powerful tools for both basic and applied research.

Different grain-filling rates explain grain-weight differences along the wheat ear.

Thousand grain weight is one of the components determining wheat grain yield. It represents the average value of individual grain weights which depends on position within the ear and on positon within the spikelet. Our objective was to quantify the influences of individual floret anthesis date, of carpel weight at anthesis and of rate and duration of grain filling, on variation in individual final grain weight. Two bread wheat cultivars were grown in a greenhouse and their ears were sampled from anthesis through to harvest. Each ear was divided into three parts-basal, central and apical-where the two proximal grains were dissected from each of two spikelets. We analysed (i) the flowering time shift within the ear and within the spikelet; and (ii) the growth kinetics during grain filling in relation to position along the ear. For both cultivars, florets located in the central part of the ear were the first to reach anthesis followed by those in the apical part and then the basal part. Within a spikelet, the floret located nearest the rachis flowered first followed by the more distal ones. We found no significant systematic effect of flowering time-shift on final grain weight. Nevertheless, grains in the central part were heavier than the basal ones (9.75% smaller) and than the apical ones (18.25% smaller). These differences were explained mainly by differences in mean grain filling rates. Analysis of growth kinetics enabled an improved explanation of the variability of individual grain weight along the ear.

Fortune telling: metabolic markers of plant performance.

BACKGROUND: In the last decade, metabolomics has emerged as a powerful diagnostic and predictive tool in many branches of science. Researchers in microbes, animal, food, medical and plant science have generated a large number of targeted or non-targeted metabolic profiles by using a vast array of analytical methods (GC-MS, LC-MS, 1H-NMR….). Comprehensive analysis of such profiles using adapted statistical methods and modeling has opened up the possibility of using single or combinations of metabolites as markers. Metabolic markers have been proposed as proxy, diagnostic or predictors of key traits in a range of model species and accurate predictions of disease outbreak frequency, developmental stages, food sensory evaluation and crop yield have been obtained. AIM OF REVIEW: (i) To provide a definition of plant performance and metabolic markers, (ii) to highlight recent key applications involving metabolic markers as tools for monitoring or predicting plant performance, and (iii) to propose a workable and cost-efficient pipeline to generate and use metabolic markers with a special focus on plant breeding. KEY MESSAGE: Using examples in other models and domains, the review proposes that metabolic markers are tending to complement and possibly replace traditional molecular markers in plant science as efficient estimators of performance.

Bread Wheat (Triticum aestivum L.) Grain Protein Concentration Is Related to Early Post-Flowering Nitrate Uptake under Putative Control of Plant Satiety Level.

The strong negative correlation between grain protein concentration (GPC) and grain yield (GY) in bread wheat complicates the simultaneous improvement of these traits. However, earlier studies have concluded that the deviation from this relationship (grain protein deviation or GPD) has strong genetic basis. Genotypes with positive GPD have an increased ability to uptake nitrogen (N) during the post-flowering period independently of the amount of N taken up before flowering, suggesting that genetic variability for N satiety could enable the breakage of the negative relationship. This study is based on two genotypes markedly contrasted for GPD grown under semi-hydroponic conditions differentiated for nitrate availability both before and after flowering. This allows exploration of the genetic determinants of post-flowering N uptake (PANU) by combining whole plant sampling and targeted gene expression approaches. The results highlights the correlation (r² = 0.81) with GPC of PANU occurring early during grain development (flowering-flowering + 250 degree-days) independently of GY. Early PANU was in turn correlated (r² = 0.80) to the stem-biomass increment after flowering through its effect on N sink activity. Differences in early PANU between genotypes, despite comparable N statuses at flowering, suggest that genetic differences in N satiety could be involved in the establishment of the GPC. Through its strong negative correlation with genes implied in N assimilation, root nitrate concentration appears to be a good marker for evaluating instantaneous plant N demand, and may provide valuable information on the genotypic N satiety level. This trait may help breeders to identify genotypes having high GPC independently of their GY.

In silico system analysis of physiological traits determining grain yield and protein concentration for wheat as influenced by climate and crop management.

Genetic improvement of grain yield (GY) and grain protein concentration (GPC) is impeded by large genotype×environment×management interactions and by compensatory effects between traits. Here global uncertainty and sensitivity analyses of the process-based wheat model SiriusQuality2 were conducted with the aim of identifying candidate traits to increase GY and GPC. Three contrasted European sites were selected and simulations were performed using long-term weather data and two nitrogen (N) treatments in order to quantify the effect of parameter uncertainty on GY and GPC under variable environments. The overall influence of all 75 plant parameters of SiriusQuality2 was first analysed using the Morris method. Forty-one influential parameters were identified and their individual (first-order) and total effects on the model outputs were investigated using the extended Fourier amplitude sensitivity test. The overall effect of the parameters was dominated by their interactions with other parameters. Under high N supply, a few influential parameters with respect to GY were identified (e.g. radiation use efficiency, potential duration of grain filling, and phyllochron). However, under low N, >10 parameters showed similar effects on GY and GPC. All parameters had opposite effects on GY and GPC, but leaf and stem N storage capacity appeared as good candidate traits to change the intercept of the negative relationship between GY and GPC. This study provides a system analysis of traits determining GY and GPC under variable environments and delivers valuable information to prioritize model development and experimental work.