RESUMO
If dihydrogen (H2) becomes a major part of the energy mix, massive storage in underground gas storage (UGS), such as in deep aquifers, will be needed. The development of H2 requires a growing share of H2 in natural gas (and its current infrastructure), which is expected to reach approximately 2% in Europe. The impact of H2 in aquifers is uncertain, mainly because its behavior is site dependent. The main concern is the consequences of its consumption by autochthonous microorganisms, which, in addition to energy loss, could lead to reservoir souring and alter the petrological properties of the aquifer. In this work, the coinjection of 2% H2 in a natural gas blend in a low-salinity deep aquifer was simulated in a three-phase (aquifer rock, formation water, and natural gas/H2 mix) high-pressure reactor for 3 months with autochthonous microorganisms using a protocol described in a previous study. This protocol was improved by the addition of protocol coupling experimental measures and modeling to calculate the pH and redox potential of the reactor. Modeling was performed to better analyze the experimental data. As in previous experiments, sulfate reduction was the first reaction to occur, and sulfate was quickly consumed. Then, formate production, acetogenesis, and methanogenesis occurred. Overall, H2 consumption was mainly caused by methanogenesis. Contrary to previous experiments simulating H2 injection in aquifers of higher salinity using the same protocol, microbial H2 consumption remained limited, probably because of nutrient depletion. Although calcite dissolution and iron sulfide mineral precipitation likely occurred, no notable evolution of the rock phase was observed after the experiment. Overall, our results suggested that H2 can be stable in this aquifer after an initial loss. More generally, aquifers with low salinity and especially low electron acceptor availability should be favored for H2 costorage with natural gas.
RESUMO
The Donnan membrane technique (DMT), in which a synthetic or natural solution (the "donor") is separated from a ligand-free solution (the "acceptor") by a cation-exchange membrane, is a recognized technique for measuring the concentration of a free metal ion in situ, with coupling to electrochemical detection allowing for the quantification of the free metal ion directly on site. However, the use of the DMT requires waiting for the free metal ion equilibrium between the donor and the acceptor solution. In this paper, we investigated the possibility of using the kinetic information and showed that non-equilibrium experimental calibrations of Cd and Pb with the ISIDORE probe could be used to measure free metal concentrations under conditions of membrane-controlled diffusion transport. The application of this dynamic approach made it possible to successfully determine the concentration of free Cd in synthetic and natural river samples. Furthermore, it was found that the determination of free Cd from the slope was not affected by the Ca concentration ratio between the acceptor and donor solution, as opposed to the traditional approach based on Donnan equilibrium. This ISIDORE probe appears to be a promising tool for determining free metal ions in natural samples.
RESUMO
Worldwide, the valorization of biogas, landfill gas and biomethane is gaining momentum as circular economies and energy transitions are triggered. Nevertheless, to sustainably integrate those gases into today's energy mix, their quality must be controlled regarding their major, minor and trace constituents to preserve the integrity of infrastructures wherein they are burned, transported or stored. Field gas sampling is the first and most critical step in the analytical chain to characterize the composition of such gases. A large array of gas sampling techniques is available, yet choosing the most suitable technique is complex, especially when targeting trace compounds (Assuntos
Biocombustíveis
, Compostos Orgânicos Voláteis
, Gases/química
, Silanos
, Siloxanas
, Compostos de Enxofre
RESUMO
In Europe, renewable energy gases such as biomethane are aimed at substituting natural gas provided their stringent compliance to natural gas quality standards stipulating maximal levels of several chemical trace compounds (TC). Preconcentration is generally required to detect TC and inasmuch as biomethane is compressed for injection in the natural gas grid, preconcentration is commonly either done by collecting the bulk pressurized gas in a high-pressure cylinder or by first depressurizing it to collect a bulk volume in e.g. a gas sampling bag. Such whole gas samples are then transported to the lab and transferred to a preconcentration unit, entailing contamination and TC loss risks. Therefore, here a novel handy field-portable device for the direct in situ high-pressure preconcentration of TC is presented, enabling to sample gases at pressures up to 200 bara through a self-assembled Tenax®TA + Carbopack™X multibed adsorbent tube. The effect of the gas sampling pressure on the preconcentration of TC on adsorbent tubes was evaluated using a synthetic gas mixture containing 41 halogenated volatile organic compounds each at 1 ppmmol in N2. At given normalized sampled volumes and in the pressure range 5-100 bara handled in French gas transport grids, the pressure had no influence on the preconcentration when the gas circulates through the adsorbent tubes and as long as the adsorbents are not saturated. Next, for the first time, a real biomethane stream was sampled using the novel direct high-pressure preconcentration method on Tenax®TA + Carbopack™X multibed adsorbent tubes, allowing to preconcentrate, in a single sampling run, a wide range of volatile organic TC. More than 26 distinct TC were detected, belonging to seven chemical families: alkenes, aromatics, alkanes (linear, cyclic and polycyclic), sulphur-compounds and terpenes, with linear alkanes (pentane, heptane, octane) and terpenes predominating. Semi-quantification indicated pentane, dimethylcyclopropane, hexane, heptane, octane, α-pinene and camphene are present at a ≤1 ppmmol concentration threshold in the biomethane.
RESUMO
Radionuclides 129I (t1/2 = 15.7 × 106 years) and 131I (t1/2 = 8.02 days) are both introduced into the environment as a result of nuclear human activities. Environmental transfer pathways and fluxes between and within ecosystems are essential information for risk assessment. In forest ecosystems, humus degradation over time could result in re-mobilization and then downward migration and/or volatilization of intercepted 129I. In order to estimate the scale of these processes, humus (mull and moder forms) sampled under deciduous and coniferous forests were spiked with 125I- (t1/2 = 59.4 days), as a surrogate for 129I, in order to study the evolution of its water-soluble and organic fractions as well as the volatilization rate during humus degradation at laboratory scale. To our knowledge, this is the first time that interactions between iodine and contrasting forms of forest humus have been investigated. The evolution of native stable iodine (127I) pools in unspiked humus was also studied. The nature of the humus' organic matter appears to be a factor that impacts on the proportions of water-soluble and organic fractions of iodine and on their evolution. Iodine-125 was mainly organically bound (fraction for mulls and moders: â¼54-59 and 41-49%, respectively) and no clear evolution was observed within the 4-month incubation period. A large decrease in 125I water-solubility occurred, being more marked for mull (from â¼14-32 to 3-7%) than for moder (from â¼21-37 to 7-19%) humus. By contrast, a significant fraction was not extractible (â¼38-43%) and varied in inverse proportion to the water-soluble fraction, suggesting a stabilization of iodine in humus after wet deposit. The nature of the humus organic matter also impacted on 125I volatilization. Although of the same order of magnitude, the total volatilization of 125I was higher for moders (â¼0.039-0.323%) than for mulls (â¼0.015-0.023%) within the 4-month incubation period. Volatilization rates for mulls were correlated with the water-soluble fraction, implying that volatilization of 125I could occur from the humus solution. Our results showed that humus is thus a zone of iodine accumulation by association with organic matter and that potential losses by lixiviation are significantly more important compared to volatilization.
Assuntos
Iodo , Monitoramento de Radiação , Ecossistema , Florestas , Humanos , Iodetos , Solo , Volatilização , ÁguaRESUMO
The last few years have seen the proliferation of anaerobic digestion plants to produce biomethane. Oxygen (O2) traces added to biogas during the desulfurization process are co-injected in the gas network and can be stored in Underground Gas Storage (UGS). However, there are no data available for the undesirable effects of O2 on these anoxic environments, especially on deep aquifers. In addition to mineral alteration, O2 can have an impact on the anaerobic autochthonous microbial life. In our study, the storage conditions of an UGS aquifer were reproduced in a high-pressure reactor and bio-geo-chemical interactions between the aqueous, gas and solid phases were studied. Sulfate was depleted from the liquid phase for three consecutive times during the first 130â¯days of incubation reproducing the storage conditions (36⯰C, 60â¯bar, methane with 1% CO2). Sulfate-reducers, such as Desulfovibrionaceae, were identified from the high-pressure system. Simulations with PHREEQC were used to determine the thermodynamic equilibrium to confirm any gas consumption. CO2 quantities decreased in the gas phase, suggesting its use as carbon source by microbial life. Benzene and toluene, hydrocarbons found in traces and known to be biodegradable in storages, were monitored and a decrease of toluene was revealed and associated to the Peptococcaceae family. Afterwards, O2 was added as 1% of the gas phase, corresponding to the maximum quantity found in biomethane after desulfurization process. Re-oxidation of sulfide to sulfate was observed along with the end of sulfate reducing activity and toluene biodegradation and the disappearance of most of the community. H2 surprisingly appeared and accumulated as soon as hydrogenotrophic sulfate-reducers decreased. H2 would be produced via the necromass fermentation accomplished by microorganisms able to resist the oxic conditions of 4.42·10-4â¯mol.Kgw-1 of O2. The solid phase composed essentially of quartz, presented no remarkable changes.
Assuntos
Água Subterrânea , Oxigênio , Geologia , Metano , SulfatosRESUMO
Storage of selenium and iodine can greatly vary between forest ecosystems, but the influence of tree species on partitioning and recycling of those elements remains elusive. In this study, contents of Se and I were measured in tree compartments, litterfall, humus, and soil horizons in monospecific stands of Douglas fir, pine, spruce, beech, and oak under identical climatic and edaphic conditions. The cycle of each element was characterized in terms of stocks and fluxes. Lowest concentrations were in wood (Se: 8-13 µg kg-1; I: <16.5 µg kg-1). Senescing organs had higher Se and I content, than the living parts of trees due to direct exposure to atmospheric deposition, with some variation between coniferous and deciduous trees. For all stands, low amounts of Se and I were involved in biological cycle as reflected by low root uptake. In humus, the enrichment of elements greatly increased with the stage of organic matter (OM) degradation with average factors of 10 and 20 for Se and I. OM degradation and element persistence in humus was influenced by tree species. Deciduous trees, with low biomass, and fast degradation of OM stored less Se and I in humus compared to fir and spruce with high humus biomass. Interestingly, tree species did not affect soil reserves of Se and I. Concentration ranges were 331-690 µg Se kg-1 and 4.3-14.5 mg I kg-1. However, the divergent vertical profiles of the elements in the soil column indicated greater mobility of I. Selenium concentrations regularly decreased with depth in correlation with OM and Fe oxides content. For iodine, the maximum iodine concentration at a soil depth of 15 to 35 cm was caused by a parallel precipitation/sorption behavior of aluminium and organic iodine dissolved in the topsoil.
Assuntos
Iodo , Selênio , Ecossistema , Florestas , Solo , ÁrvoresRESUMO
Selenium is a trace element and an essential nutrient. Its long-lived radioisotope, selenium 79 is of potential radio-ecological concern in surface environment of deep geological repository for high-level radioactive waste. In this study, the influence of environmental, climatic and geochemical conditions on stable Se (as a surrogate of 79Se) accumulation was statistically assessed (PCA analysis, Kruskall-Wallis and Spearman tests) based on the analysis of its concentration in litterfall, humus, and soil samples collected at 51 forest sites located in France. Selenium concentrations were in the ranges: 22-369, 57-1608 and 25-1222 µg kg-1 respectively in litterfall, humus, and soil. The proximity of the ocean and oceanic climate promoted Se enrichment of litterfall, likely due to a significant reaction of wet deposits with forest canopy. Se content was enhanced by humification (up to 6 times) suggesting that Se concentrations in humus were affected by atmospheric inputs. Selenium stock in humus decreased in the order of decreasing humus biomass and increasing turnover of organic matter: mor > moder > mull. Positive correlations between Se content and geochemical parameters such as organic carbon content, total Al and total Fe confirmed the important role of organic matter (OM) and mineral Fe/Al oxides in Se retention in soils.
RESUMO
The spatial distribution and seasonal variations of atmospheric iodine (I), selenium (Se) and caesium (Cs) depositions remain unclear and this precludes adequate inputs for biogeochemical models. We quantified total concentrations and fluxes of these elements in rainfalls from 27 monitoring sites in France with contrasted climatic conditions; monthly measurements were taken over one year (starting in 2016/09). Since speciation of I and Se can impact their behaviour in the environment, analysis of their inorganic compounds was also conducted. Our results showed that annual I concentrations in rainfall were much higher than those of Se and Cs (annual means = 1.56, 0.044 and 0.005 µg L-1, respectively). The annual iodine concentrations were highly positively correlated with those of marine elements (i.e. Na, Cl and Mg), involving higher I concentrations under oceanic climate than for transition, continental and mountainous ones. Furthermore, common patterns were found between Se concentrations and both marine and terrestrial components consistent with the various sources of Se in atmosphere. The association of Cs with two anthropogenic components (i.e. NH4+ and NO3-) used in agriculture supports the hypothesis of its terrestrial origin (i.e. from atmospheric dusts) in rainfall. We found higher rainfall concentrations of I during the warmest months for all climates. However, no specific seasonal trend occurred for Se and Cs. On annual average, rainfall contained mostly unidentified selenium compounds (inorganic Se proportions = 25-54%) and equal proportions of inorganic and unidentified I compounds. Concentrations of iodate were higher under oceanic climate consistent with an iodine marine-origin.
Assuntos
Iodo , Selênio , Césio , Monitoramento Ambiental , França , Oceanos e Mares , Estações do AnoRESUMO
Estimation of the canopy influence on atmospheric inputs of iodine (I), selenium (Se) and caesium (Cs) in terrestrial ecosystems is an essential condition for appropriate biogeochemical models. However, the processes involved in rain composition modifications after its passage through forest canopy have been barely studied for these elements. We monitored I, Se and Cs concentrations in both rainfall and throughfall of fourteen French forested sites throughout one year, and estimated dry deposition and canopy exchange fluxes for these elements, as well as speciation of I and Se. Comparison of rainfall and throughfall elemental composition highlighted an important impact of forest canopy on both (i) concentrations and fluxes of I, Se and Cs, and (ii) I and Se species. For the three elements, most of their throughfall concentrations were higher than corresponding rainfall. The increase of throughfall elemental fluxes was mostly due to dry deposition for I and Se although the canopy exchange model revealed some sorption within the canopy in most cases; for Cs, foliage leaching was most influencing. Regarding speciation, iodine species in rainfall were highly modified by forest canopy with an important increase of unidentified I proportion in throughfall (on average 49 and 82% in rainfall and throughfall, respectively), possibly due to washoff of dry deposition and/or to transformation into organic forms. Similarly, while rainfall was composed of 26-54% of inorganic Se, inorganic species were undetectable in throughfall. This dataset represents key information to improve modelling of I, Se and Cs cycling within forest ecosystems.
Assuntos
Iodo , Selênio , Césio , Ecossistema , Monitoramento Ambiental , Florestas , França , ÁrvoresRESUMO
Due to its longevity, radioisotope 129I is a health concern following potential releases in the environment which raises questions about residence and exposure times relevant for risk assessments. We determined 127I concentrations (as a surrogate for 129I) in a series of French forest soils (i.e. litters, humus and mineral soils) under different vegetation and climate conditions in order to identify the major processes affecting its accumulation and persistence in the soil column. The input fluxes linked to rainfall, throughfall and litterfall were also characterized. Main results obtained showed that: (i) rainfall iodine concentrations probably influenced those of litterfall through absorption by leaves/needles returning to the ground; (ii) throughfall was the major iodine input to soils (meanâ¯=â¯83%), compared to litterfall (meanâ¯=â¯17%); (iii) humus represented a temporary storage of iodine from atmospheric and biomass deposits; (iv) iodine concentrations in soils depended on both the iodine inputs and the soil's ability to retain iodine due to its organic matter, total iron and aluminium concentrations; (v) these soil properties were the main factors influencing the accumulation of iodine in the soil column, resulting in residence times of 419-1756 years; and (vi) the leaching of iodine-containing organic matter dissolved in soil solution may be an important source of labile organic iodine for groundwater and streams.
Assuntos
Florestas , Iodo/análise , Solo/química , Compostos de Alumínio , Monitoramento Ambiental/métodos , França , Água Subterrânea/química , Ferro , Folhas de Planta/química , Rios/químicaRESUMO
Radioiodine is of health concerns in case of nuclear events. Possible pathways and rates of flow are essential information for risk assessment. Forest ecosystems could influence the global cycle of long-lived radioiodine isotope (129I) with transfer processes similar to stable isotope (127I). Understanding iodine cycling in forest involves study of the ecosystem as a whole. In this context, we determined the 127I contents and distribution in soil, tree compartments and atmospheric inputs during a three years in situ monitoring of a temperate beech forest stand. The iodine cycle was first characterized in terms of stocks by measuring its concentrations in: tree, litterfall, humus, soil, rainfall, throughfall, stemflow and soil solutions. Main annual fluxes (requirement, uptake and internal transfers) and forest input-output budget were also estimated using conceptual model calculations. Our findings show that: (i) soil is the main I reservoir accounting for about 99.9% of ecosystem total stock; (ii) iodine uptake by tree represents a minor fraction of the available pool in soil (<0.2%); (iii) iodine allocation between tree compartments involves low immobilization in wood and restricted location in the roots; (iv) translocation of excess iodine towards senescing foliage appears as an elimination process for trees, and (v) litterfall is a major pathway in the I biological cycling. In our soil conditions, the input - output budget shows that the ecosystem behaves as a potential source of I for groundwater.
Assuntos
Fagus/fisiologia , Florestas , Iodo/metabolismo , Poluentes do Solo/metabolismo , Ecossistema , Radioisótopos do Iodo , Solo , ÁrvoresRESUMO
A better understanding of selenium fate in soils at both short and long time scales is mandatory to consolidate risk assessment models relevant for managing both contamination and soil fertilization issues. The purpose of this study was thus to investigate Se retention processes and their kinetics by monitoring time-dependent distribution/speciation changes of both ambient and freshly added Se, in the form of stable enriched selenite-77, over a 2-years field experiment. This study clearly illustrates the complex reactivity of selenium in soil considering three methodologically defined fractions (i.e. soluble, exchangeable, organic). Time-dependent redistribution of Se-77 within solid-phases having different reactivity could be described as a combination of chemical and diffusion controlled processes leading to its stronger retention. Experimental data and their kinetic modeling evidenced that transfer towards less labile bearing phases are controlled by slow processes limiting the overall sorption of Se in soils. These results were used to estimate time needed for (77)Se to reach the distribution of naturally present selenium which may extend up to several decades. Ambient Se speciation accounted for 60% to 100% of unidentified species as function of soil type whereas (77)Se(IV) remained the more abundant species after 2-years field experiment. Modeling Se in the long-term without taking account these slow sorption kinetics would thus result in underestimation of Se retention. When using models based on Kd distribution coefficient, they should be at least reliant on ambient Se which is supposed to be at equilibrium.
Assuntos
Monitoramento Ambiental/métodos , Ácido Selenioso/análise , Selênio/análise , Poluentes do Solo/análise , Solo/químicaRESUMO
Selenium is both essential and toxic for mammals; the range between the two roles is narrow and not only dose-dependent but also related to the chemical species present in foodstuff. Unraveling the metabolism of Se in plants as a function of Se source may thus lead to ways to increase efficiency of fertilization procedures in selenium deficient regions. In this study, stable-isotope tracing was applied for the first time in plants to simultaneously monitor the bio-incorporation of two inorganic Se species commonly used as foodstuff enrichment sources. Occurrence and speciation of Se coming from different Se sources were investigated in root and leaf extracts of ryegrass (Lolium perenne L.), which had been co-exposed to two labeled Se species ((77)SeIV and (82)SeVI). Although the plant absorbed similar amounts of Se when supplied in the form of selenite or selenate, the results evidenced marked differences in speciation and tissues allocation. Selenite was converted into organic forms incorporated mostly into high molecular weight compounds with limited translocation to leaves, whereas selenate was highly mobile being little assimilated into organic forms. Double-spike isotopic tracer methodology makes it possible to compare the metabolism of two species-specific Se sources simultaneously in a single experiment and to analyze Se behavior in not-hyperaccumulator plants, the ICP-MS sensitivity being improved by the use of enriched isotopes.
Assuntos
Marcação por Isótopo/métodos , Isótopos/metabolismo , Lolium/metabolismo , Selênio/metabolismo , Transporte Biológico , Isótopos/análise , Lolium/química , Folhas de Planta/química , Folhas de Planta/metabolismo , Raízes de Plantas/química , Raízes de Plantas/metabolismo , Selênio/análiseRESUMO
Selenium adsorption onto oxy-hydroxides mainly controls its mobility in volcanic soils, red earths and soils poor in organic matter (OM) while the influence of OM was emphasized in podzol and peat soils. This work aims at deciphering how those solid phases influence ambient Se mobility and speciation under less contrasted conditions in 26 soils spanning extensive ranges of OM (1-32%), Fe/Al oxy-hydroxides (0.3-6.1%) contents and pH (4.0-8.3). The soil collection included agriculture, meadow and forest soils to assess the influence of OM quality as well. Trace concentrations of six ambient Se species (Se(IV), Se(VI) and 4 organo-Se compounds) were analyzed by HPLC-ICP-MS in three extractants (ultrapure water, phosphate and sodium hydroxide) targeting Se associated to different soil phases. The Kd values determined from ultrapure water extraction were higher than those reported in commonly used short-term experiments after Se-spiking. Correlations of ambient Se content and distribution with soil parameters explained this difference by an involvement of slow processes in Se retention in soils. The 26 Kd values determined here for a wide variety of soils thus represent a relevant database for long-term prediction of Se mobility. For soils containing less than 20% OM, ambient Se solubility is primarily controlled by its adsorption onto crystalline oxy-hydroxides. However, OM plays an important role in Se mobility by forming organo-mineral associations that may protect adsorbed Se from leaching and/or create anoxic zones (aggregates) where Se is immobilized after its reduction. Although for the first time, inorganic Se(IV), Se(VI) and organo-Se compounds were simultaneously investigated in a large soil collection, high Se proportions remain unidentified in each soil extract, most probably due to Se incorporation and/or binding to colloidal-sized OM. Variations of environmental factors regulating the extent of OM-mineral associations/aggregation may thus lead to changes in Se mobility and bio-availability.
Assuntos
Monitoramento Ambiental , Selênio/análise , Poluentes do Solo/análise , Solo/química , AgriculturaRESUMO
A better understanding of Se fate in soils is required for different environmental issues, such as radioactive waste management or soil fertilization procedures. In these contexts, the mobility and speciation of Se have to be studied at both short and long terms after Se inputs. Here, we present a new methodology to monitor simultaneously the reactivity of added (isotopic enriched tracers) and ambient Se at trace level in soils by high-performance liquid chromatography inductively coupled plasma mass spectrometry (ICP-MS) following specific extractions. To do so, the collision/reaction cell of the ICP-MS instrument and the interference corrections were optimized to measure reliably the four major Se isotopes. To exemplify the method capabilities, the behaviors of added (77)Se(IV) and ambient Se were followed up in two soils submitted to an ageing process during 3 months. The solid/liquid distribution of added Se reached a steady state after 1 month while its speciation and distribution among soil solid phases were still changing after 3 months. The results clearly demonstrate that slow processes are involved in Se retention and transformation in soils. The usual short-term experiments (<1 month) performed after Se addition are thus not suitable for long-term risk assessment. Interestingly, the behavior of added Se tended to that of ambient Se, suggesting that ambient Se would be useful to infer the fate of Se input over long time scales.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Isótopos/química , Espectrometria de Massas/métodos , Selênio/química , Solo/química , CinéticaRESUMO
In this work, the analytical potential of cyclical electrical field flow fractionation (CyElFFF) for nanomaterial and colloidal particle characterization has been experimentally demonstrated. Different operating parameters were investigated in order to evaluate their effect on the mechanisms of retention and fractionation power of CyElFFF. The voltage and frequency of the oscillating electrical field appeared to be the most influential parameters controlling the separation mode. Mobile phase flow rate was also found to be a key parameter controlling the fractionation efficiency. This work allowed the definition of operating conditions such that a reliable CyElFFF analysis could be performed on different nanoparticles on the basis of the direct comparison of their theoretical and experimental behavior. The results show that this technique in optimized conditions is a powerful tool for electrophoretic mobility based separation and characterization of various nanoparticles.
RESUMO
This paper describes the development of an analytical methodology to determine speciation of selenium present in soils at trace level (µg kg(-1)). The methodology was based on parallel single extractions and high performance liquid chromatography hyphenated to inductively coupled plasma mass spectrometry (HPLC-ICPMS). Two complementary chromatographic separations were used to confirm Se species identity. Different extractants, selected on the basis of sequential extraction schemes, were compared. Ultrapure water, 0.1 molL(-1) phosphate buffer (KH(2)PO(4)/K(2)HPO(4)) at pH 7 and 0.1 molL(-1) sodium hydroxide extractants were finally chosen owing to their efficiency in extracting Se and compatibility with Se species stability. These extractants allow also assessing respectively water-soluble Se (i.e. the most mobile Se fraction), exchangeable Se (i.e. sorbed onto soil component surface) and Se bound to soil organic matter. This methodology gives thus information on Se mobility related to its distribution in soil with preservation of original Se speciation. Detection limits range from 3 to 29ng(Se)L(-1) and from 0.1 to 10 µg(Se)kg(-1), allowing determination of Se species concentrations in extracts from soils containing native Se at trace level. The methodology was applied to three soils with total Se concentrations between 210 and 1560 µg(Se)kg(-1).
Assuntos
Espectrometria de Massas/métodos , Selênio/análise , Solo/análise , Cromatografia Líquida de Alta Pressão/métodos , Limite de DetecçãoRESUMO
Asymmetrical flow field-flow fractionation (AFlFFF) hyphenated to multi-angle laser-light scattering (MALS) was evaluated in order to determine single walled carbon nanotube (SWCNT) length distribution. Fractionation conditions were investigated by examining mobile phase ionic strength and pH, channel components and cross-flow rate. Ammonium nitrate-based mobile phase with 10(-5)molL(-1) ionic strength and pH 6 allows the highest sample recovery (89±3%) to be obtained and the lowest loss of the longest SWCNT. A cross-flow rate of 0.9mLmin(-1) leads to avoid any significant membrane-sample interaction. Length was evaluated from gyration radius measured by MALS by comparing SWCNT to prolate ellipsoid. In order to validate the fractionation and the length determination obtained by AFlFFF-MALS, different SWCNT aliquots were collected after fractionation and measured by dynamic light scattering (DLS). AFlFFF is confirmed to operate in normal mode over 100-2000nm length. MALS length determination after fractionation is found to be accurate with 5% RSD. Additionally, a shape analysis was performed by combining gyration and hydrodynamic radii.
Assuntos
Fracionamento por Campo e Fluxo/métodos , Nanotubos de Carbono/química , Espalhamento de Radiação , Algoritmos , Concentração de Íons de Hidrogênio , Lasers , Luz , Modelos Lineares , Conformação Molecular , Concentração OsmolarRESUMO
This paper provides quantitative information on the transfer of TBT (tributyltin) and TPhT (triphenyltin) from sludged soil to cultivated lettuce. The effect of their initial concentrations in the soil (varying from 20 to 50 microg(Sn)kg(-1) for each triorganotin), sludge amount (between 1% and 9%), and cultivation duration (32-54 days) was evaluated by means of experimental designs. The impact of the cultivation temperature at 13 degrees C and 19 degrees C on organotin fate in the soil/plant system was also considered. The final concentration of a given organotin in the plant roots was found to depend directly on its initial concentration in the soil. A total of (85+/-15)% of initial TBT in the soil was still present at the end of the experiments, regardless of the cultivation duration. Consequently, TBT appeared to be taken up by lettuce continually. A total of (75+/-5)% of TPhT was found to be degraded in the soil at 54 days. So, this compound could have been taken up by the plant at the beginning of the cultivation. Sludge amount seemed to have a negative effect on TPhT concentration in a plant at 32 days. This could be due to the quantitative TPhT sorption onto the sludge, observed just after spiking. Organotin plant uptake appeared to be more important at 19 degrees C than at 13 degrees C. TBT and TPhT were mainly accumulated in the roots, and up to 2% and 10% of TPhT and TBT, respectively, were translocated to the shoots. Despite TPhT degradation, products in large amounts were present in the soil and were not significantly taken up by the plant. They possibly remained immobilized on solid phases of the sludged soil.