Detection of biogenic amines in pet food ingredients by RP-HPLC with automated dansyl chloride derivatization.

The detection of biogenic amines is of significant interest to the food industry, as they can be used as indicators of food spoilage and they are potentially toxic. Because of their importance, there is a need for automated methods suitable for industry use that can detect a wide range of biogenic amines at sufficient levels for food analysis. In this work, optimized conditions for the automated determination of biogenic amines (histamine, putrescine, cadaverine, spermine, spermidine, tyramine, and tryptamine) derivatized with dansyl chloride are presented. Limits of detection below 0.2 ppm were achieved for seven biogenic amines and percentage recoveries were between 80 and 109% for the seven analytes spiked into meat meal samples. The method is simple and compared well to an existing method for the detection of biogenic amines in pet food ingredients.

3D-printed and CNC milled flow-cells for chemiluminescence detection.

Herein we explore modern fabrication techniques for the development of chemiluminescence detection flow-cells with features not attainable using the traditional coiled tubing approach. This includes the first 3D-printed chemiluminescence flow-cells, and a milled flow-cell designed to split the analyte stream into two separate detection zones within the same polymer chip. The flow-cells are compared to conventional detection systems using flow injection analysis (FIA) and high performance liquid chromatography (HPLC), with the fast chemiluminescence reactions of an acidic potassium permanganate reagent with morphine and a series of adrenergic phenolic amines.

Chemiluminescence detection of heroin in illicit drug samples.

Heroin (3,6-diacetylmorphine) and several important extraction and synthesis impurities (morphine, 6-monoacetylmorphine, codeine and 6-acetylcodeine) were determined in illicit drug samples, using high performance liquid chromatography with 'parallel segmented flow', which enabled the simultaneous use of three complementary modes of detection (UV-absorbance, tris(2,2'-bipyridine)ruthenium(III) chemiluminescence and permanganate chemiluminescence). This rapid and sensitive approach for the analysis of street heroin was used to explore the chemistry of a proposed heroin screening test that is based on the relative response with these two chemiluminescence reagents using flow injection analysis. Although heroin was the major constituent of the six drug samples (between 16% and 67% by mass), the synthetic by-product 6-acetylcodeine (2.5-8.3%) made a greater contribution to the total [Ru(bipy)3](3+) chemiluminescence response of the screening test. The signal with permanganate was primarily due to the presence of 6-monoacetylmorphine (0.9-29%), and was therefore indicative of the degree of sample degradation during clandestine manufacture or poor storage conditions prior to the drug seizure. In the second part of the screening test, the sample is treated with sodium hydroxide, which results in a large increase in the signal with permanganate, due to the rapid hydrolysis of heroin to 6-monoacetylmorphine. As the emission of these two reagents with morphinan-alkaloids and their derivatives largely depends on the substituent at the O(3) position, the slower hydrolysis of 6-monoacetylmorphine to morphine, and 6-acetylcodeine to codeine, did not have a major impact on the characteristic pattern of responses in the screening test.