Current status of ultrasonography in national cancer surveillance program for hepatocellular carcinoma in South Korea: a large-scale multicenter study.

Background/Aim: Abdominal ultrasonography (USG) is recommended as a surveillance test for high-risk groups for hepatocellular carcinoma (HCC). This study aimed to analyze the current status of the national cancer surveillance program for HCC in South Korea and investigate the effects of patient-, physician-, and machine-related factors on HCC detection sensitivity. Methods: This multicenter retrospective cohort study collected surveillance USG data from the high-risk group for HCC (liver cirrhosis or chronic hepatitis B or C >40 years of age) at eight South Korean tertiary hospitals in 2017. Results: In 2017, 45 experienced hepatologists or radiologists performed 8,512 USG examinations. The physicians had a mean 15.0±8.3 years of experience; more hepatologists (61.4%) than radiologists (38.6%) participated. Each USG scan took a mean 12.2±3.4 minutes. The HCC detection rate by surveillance USG was 0.3% (n=23). Over 27 months of follow-up, an additional 135 patients (0.7%) developed new HCC. The patients were classified into three groups based on timing of HCC diagnosis since the 1st surveillance USG, and no significant intergroup difference in HCC characteristics was noted. HCC detection was significantly associated with patient-related factors, such as old age and advanced fibrosis, but not with physician- or machine-related factors. Conclusions: This is the first study of the current status of USG as a surveillance method for HCC at tertiary hospitals in South Korea. It is necessary to develop quality indicators and quality assessment procedures for USG to improve the detection rate of HCC.

Breast Trauma: A United States-Based Epidemiological Study From 2016 to 2019.

Background  Breast trauma is an often under-recognized injury, especially in female polytrauma patients. The purpose of this study was to assess the prevalence of breast injuries and their association with injury severity score (ISS) in trauma patients nationally.  Method A retrospective review was performed using data from the National Trauma Data Bank® (NTDB®) from 2016 to 2019, using all applicable International Classification of Diseases (ICD) codes for three outlined subgroups (abrasions, contusions, and open wounds/punctures/lacerations) with minors excluded. All continuous variables were tested as non-normally distributed, and all test results for continuous variables used the Kruskal-Wallis test. All categorical variables were tested using a chi-squared test. Results  Patients with traumatic breast abrasions and contusions had a higher rate of intensive care unit (ICU) admissions (23.8%; n=395 and 25.3%; n=48, respectively) compared to patients with open wounds/punctures/lacerations (13.6%; n=205). Patients with abrasions and contusions to the breast had a significantly higher ISS compared to those with visible open wounds/punctures/lacerations (9 and 9, vs 5, p <0.001). Mortality rates were highest among patients with breast abrasions and contusions, 15% (n=213) and 14% (n=23), respectively, compared to patients with open wounds/punctures/lacerations at 11% (n=132), p<0.017. Conclusion  Traumatic breast abrasions and contusions were associated with higher rates of ICU admission, elevated ISS, and overall mortality compared to open breast wounds, punctures, or lacerations. This indicates the importance of traumatic breast injuries as a prognostic indicator in the standard workup of a trauma patient.

Platelet-to-White Blood Cell Ratio Is Associated with Adverse Outcomes in Cirrhotic Patients with Acute Deterioration.

Background: The platelet-to-white blood cell ratio (PWR) is a hematologic marker of the systemic inflammatory response. Recently, the PWR was revealed to have a role as an independent prognostic factor for mortality in patients with hepatitis B virus (HBV)-related acute-on-chronic failure (ACLF) and HBV-related liver cirrhosis (LC) with acute decompensation (AD). However, the prognostic role of the PWR still needs to be investigated in LC patients with AD. In this study, we analyzed whether the PWR could stratify the risk of adverse outcomes (death or liver transplantation (LT)) in these patients. Methods: A prospective cohort of 1670 patients with AD of liver cirrhosis ((age: 55.2 ± 7.8, male = 1226 (73.4%)) was enrolled and evaluated for 28-day and overall adverse outcomes. Results: During a median follow-up of 8.0 months (range, 1.9−15.5 months), 424 (25.4%) patients had adverse outcomes (death = 377, LT = 47). The most common etiology of LC was alcohol use (69.7%). The adverse outcome rate was higher for patients with a PWR ≤ 12.1 than for those with a PWR > 12.1. A lower PWR level was a prognostic factor for 28-day adverse outcomes (PWR: hazard ratio 1.707, p = 0.034) when adjusted for the etiology of cirrhosis, infection, ACLF, and the MELD score. In the subgroup analysis, the PWR level stratified the risk of 28-day adverse outcomes regardless of the presence of ACLF or the main form of AD but not for those with bacterial infection. Conclusions: A lower PWR level was associated with 28-day adverse outcomes, indicating that the PWR level can be a useful and simple tool for stratifying the risk of 28-day adverse outcomes in LC patients with AD.

Influence of Additive Firing on the Surface Characteristics, Streptococcus mutans Viability and Optical Properties of Zirconia.

The purpose of this study was to observe whether the repetitive firing of dental zirconia caused changes in surface characteristics, S. mutans viability, and optical properties of zirconia. Dental zirconia blocks were sintered and randomly distributed into seven experimental groups: F0-F6. Except for F0, which only went through sintering, the additive firing was performed in order for F1-F6. Surface roughness, contact angle, S. mutans viability by fluorescence, and translucency parameter were measured. They were all highest after sintering (F0) and decreased after additive firings (F1-F6). The additive firing of zirconia after sintering decreased surface roughness, contact angle, S. mutans viability, and translucency. The number of firings after the first firing was not found to be critical in surface characteristics, S. mutans viability, and optical property. Changes in surface characteristics might have led to a decrease in S. mutans viability, while the change of translucency was not clinically significant. This implies that additive firing may prevent secondary caries under zirconia restorations, not compromising esthetic appearance.

Color Stability of Dental Reinforced CAD/CAM Hybrid Composite Blocks Compared to Regular Blocks.

This study compares the color stability of dental reinforced computer-aided design/computer-aided manufacturing (CAD/CAM) hybrid composite blocks to that of regular blocks. One hundred fifty disc-type specimens (n = 15) were prepared from five sets of hybrid composite blocks (Cerasmart-200/Cerasmart-300, KZR-CAD HR/KZR-CAD HR3, Estelite Block/ Estelite-P Block, Avencia Block/Avencia-P Block, Mazic Duro/Duro Ace). The specimen color and translucency parameter (TP) were assessed using a spectrophotometer before and after immersion in staining solutions (water, 10% ethanol, simulated red wine). Changes in color (ΔE) and translucency (ΔTP) of specimens were calculated. The data were analyzed using the analysis of variance (ANOVA) and Tukey's post hoc test (p < 0.05). Microstructural features of the hybrid composite blocks were also examined using FE-SEM. Immersion in deionized water or 10% ethanol made no significant color or translucency changes (except for Avencia-P Block); however, the simulated red wine caused significant changes to the color and translucency of almost all specimens, especially after 4 weeks of immersion. The reinforced hybrid blocks (except for Estelite-P Block and Duro Ace) showed lower color stability than corresponding regular blocks. Avencia-P Block showed significantly reduced color stability compared to Avencia Block. Even in deionized water and 10% ethanol, Avencia-P Block showed perceptible ΔE and decreased translucency. Estelite Block/ Estelite-P Block and Mazic Duro/Duro Ace showed better color stability than the other materials tested.

Open bite correction by intrusion of posterior teeth with miniscrews.

The application of orthodontic miniscrews has simplified the treatment of an anterior open bite by making it more efficient and esthetic. A 19-year-old woman with an anterior open bite was treated by an intrusion of the maxillary posterior teeth using miniscrews. The posterior teeth were splinted on the palatal side with rapid maxillary expansion (RME), and an intrusive force was then applied to the miniscrews on the buccal side. The 3.5 mm anterior open bite was corrected after 5 months of intrusion. As a result, a harmonious facial profile was achieved by a closing mandibular rotation.

Treatment of Class II protrusion with severe crowding using indirect miniscrew anchorage.

This report describes the nonsurgical treatment of a patient with skeletal Class II protrusion and severe crowding. A 20-year-old woman presented with the chief complaint of lip protrusion and crowding. To correct the Class II relationship, severe crowding, and lip protrusion, distal movement of the maxillary first molars using indirect miniscrew anchorage and nickel-titanium coil springs, along with extraction of the first premolars and maxillary second molars, was planned. After the distal molar movement phase was complete, the maxillary first molars had moved 8.0 mm to the distal, and the first premolars, which were splinted to the miniscrews, had moved 0.5 mm to the mesial. The results show that the distal molar movement mechanics were efficient and stable. After treatment, all of the patient's chief complaints were relieved and an esthetic facial profile was obtained.