Non-thermal plasma accelerates the healing process of peripheral nerve crush injury in rats.

The objective of this study was to evaluate the effect of non-thermal plasma (NTP) on the healing process of peripheral nerve crush injuries, which can occur during dental implant procedures. For this, a rat model of sciatic nerve crush injury (SNCI) was adopted. The rats were divided into three groups: non-nerve damage (non-ND), nerve damage (ND), and ND+NTP group. To evaluate the sciatic nerve (SN) function, the static sciatic index was calculated, and the muscle and SN tissues were subjected to a histologic analysis. The results showed that NTP effectively accelerated the healing process of SNCI in rats. In contrast to the ND group, which showed approximately 60% recovery in the SN function, the NTP-treated rats showed complete recovery. Histologically, the NTP treatments not only accelerated the muscle healing, but also reduced the edema-like phenotype of the damaged SN tissues. In the ND group, the SN tissues had an accumulation of CD68-positive macrophages, partially destroyed axonal fibers and myelinated Schwann cells. Conversely, in the ND+NTP group, the macrophage accumulation was reduced and an overall regeneration of the damaged axon fibers and the myelin sheath was accomplished. The results of this study indicate that NTP can be used for healing of injured peripheral nerves.

Misdiagnosis of ameloblastoma in a patient with clear cell odontogenic carcinoma: a case report.

Clear cell odontogenic carcinoma (CCOC), a rare tumor in the head and neck region, displays comparable properties with other tumors clinically and pathologically. In consequence, an incorrect diagnosis may be established. A 51-year-old male patient who was admitted to the Department of Oral and Maxillofacial Surgery at Pusan National University Dental Hospital was initially diagnosed with ameloblastoma via incisional biopsy. However, the excised mass of the patient was observed to manifest histopathological characteristics of ameloblastic carcinoma. The lesion was ultimately diagnosed as clear cell odontogenic carcinoma by the Department of Oral Pathology of Pusan National Dental University. Therefore, segmental mandibulectomy and bilateral neck dissection were performed, followed by reconstruction with fibula free flap and reconstruction plate. Concomitant chemotherapy radiotherapy was not necessary. The patient has been followed up, and no recurrence has occurred 6 months after surgery.

Mandibular reconstruction with a ready-made type and a custom-made type titanium mesh after mandibular resection in patients with oral cancer.

BACKGROUND: After the resection at the mandibular site involving oral cancer, free vascularized fibular graft, a type of vascularized autograft, is often used for the mandibular reconstruction. Titanium mesh (T-mesh) and particulate cancellous bone and marrow (PCBM), however, a type of non-vascularized autograft, can also be used for the reconstruction. With the T-mesh applied even in the chin and angle areas, an aesthetic contour with adequate strength and stable fixation can be achieved, and the pores of the mesh will allow the rapid revascularization of the bone graft site. Especially, this technique does not require microvascular training; as such, the surgery time can be shortened. This advantage allows older patients to undergo the reconstructive surgery. CASE PRESENTATION: Reported in this article are two cases of mandibular reconstruction using the ready-made type and custom-made type T-mesh, respectively, after mandibular resection. We had operated double blind peer-review process. A 79-year-old female patient visited the authors' clinic with gingival swelling and pain on the left mandibular region. After wide excision and segmental mandibulectomy, a pectoralis major myocutaneous flap was used to cover the intraoral defect. Fourteen months postoperatively, reconstruction using a ready-made type T-mesh (Striker-Leibinger, Freibrug, Germany) and iliac PCBM was done to repair the mandible left body defect.Another 62-year-old female patient visited the authors' clinic with pain on the right mandibular region. After wide excision and segmental mandibulectomy on the mandibular squamous cell carcinoma (SCC), reconstruction was done with a reconstruction plate and a right fibula free flap. Sixteen months postoperatively, reconstruction using a custom-made type T-mesh and iliac PCBM was done to repair the mandibular defect after the failure of the fibula free flap. The CAD-CAM T-mesh was made prior to the operation. CONCLUSIONS: In both cases, sufficient new-bone formation was observed in terms of volume and strength. In the CAD-CAM custom-made type T-mesh case, especially, it was much easier to fix screws onto the adjacent mandible, and after the removal of the mesh, the appearance of both patients improved, and the neo-mandibular body showed adequate bony volume for implant or prosthetic restoration.

Evaluation of Intersegmental Displacement After Mandibular Setback Split Ramus Osteotomy Using Modified L-Shaped Monocortical Plate: Cone-Beam Computed Tomography Superimposition.

PURPOSE: The purpose of the current study is to compare intersegmental displacements after mandibular setback sagittal split ramus osteotomy (SSRO) using 4 types of osteosynthesis methods. PATIENTS AND METHODS: This is a retrospective study of 53 subjects who presented underwent bilateral setback SSRO at Pusan National University Hospital from January 2009 to December 2013. The subjects were divided into 4 groups according to the osteosynthesis method applied: group A-modified L-type monocortical plate; B-conventional miniplate; group C-bicortical screws; group D-metal and absorbable screws. To obtain the intersegmental displacement, the mean of the differences of the 3-dimensional from T0 (2 days after surgery) to T1 (6 months after surgery) was calculated for the right and left condylar heads (condylion, Cd) and the right and left coronoid processes (Cps) using 3-dimensional imaging software (Ondemand 3D; Cybermed Co, Seoul, Korea). RESULTS: For the condylion in the x, y, z coordinate system, in group A, there were significant differences in the y-axis for the right and left Cd; in group B, significant differences in the y-axis for the right Cd and in the y- and z-axes for the left Cd; in group C, no significant differences in the axis for the Cd; and in group D, there were significant differences in the y- and z-axes for the right Cd and in the x- and y-axes for the left Cd. For the Cps, the results are not much different from the condylion movement in all group. CONCLUSION: In the current study, group C manifested the greatest displacement for the healing period. Group A did not show the significant difference to group B. In view of these results, modified L-shaped monocortical plate can be applied for osteosynthesis effectively.

Malignant lymphoma on parotid gland: a clinical case.

Non-Hodgkin's lymphoma on the parotid gland is a relatively rare occurrence among head and neck tumors. The mass of parotid gland lymphoma cannot be distinguished from other benign masses of the parotid gland; therefore, it is important to consider lymphoma in the differential diagnosis when examining parotid swellings and masses. Parotid gland lymphoma is most likely to be B-cell, non-Hodgkin's lymphoma of one of three types, which include follicular, marginal zone, and diffuse large B-cell, although other histologic patterns have been described. We present a review of a patient with diffuse large B-cell lymphoma (DLBCL) who presented to the Department of Oral and Maxillofacial Surgery of Pusan National University Hospital (Yangsan, Korea).

Volumetric stability of autogenous bone graft with mandibular body bone: cone-beam computed tomography and three-dimensional reconstruction analysis.

OBJECTIVES: The purpose of this study was to estimate the volumetric change of augmented autobone harvested from mandibular body cortical bone, using cone-beam computed tomography (CBCT) and three-dimensional reconstruction. In addition, the clinical success of dental implants placed 4 to 6 months after bone grafting was also evaluated. MATERIALS AND METHODS: Ninety-five patients (48 men and 47 women) aged 19 to 72 years were included in this study. A total of 128 graft sites were evaluated. The graft sites were divided into three parts: anterior and both posterior regions of one jaw. All patients included in the study were scheduled for an onlay graft and implantation using a two-stage procedure. The dental implants were inserted 4 to 6 months after the bone graft. Volumetric stability was evaluated by serial CBCT images. RESULTS: No major complications were observed for the donor sites. A total of 128 block bones were used to augment severely resorbed alveolar bone. Only 1 of the 128 bone grafts was resorbed by more than half, and that was due to infection. In total, the average amount of residual grafted bone after resorption at the recipient sites was 74.6%±8.4%. CONCLUSION: Volumetric stability of mandibular body autogenous block grafts is predictable. The procedure is satisfactory for patients who want dental implants regardless of atrophic alveolar bone.

Enucleation of large keratocystic odontogenic tumor at mandible via unilateral sagittal split osteotomy: a report of three cases.

Keratocystic odontogenic tumor (KCOT) is a common benign tumor of osseous lesions in dental and maxillofacial practice. We describe three cases of large KCOT located in the posterior part of the mandible extending to the angle and ramus region, which were enucleated via sagittal split osteotomy (SSO) of the mandible. There are cases in which a conventional enucleation procedure does not ensure complete excision of the entire lesion without damage to vital structures like the inferior alveolar nerve. In such cases, a SSO approach could be a better choice than conventional methods. The purpose of this article is to describe our experience using unilateral mandibular SSO for removal of a KCOT from the mandible.